Top » Catalog » Motors & Turbines » Electric » Brushless » AXI » MM534518EX3D

413.00EUR

AXI 5345/18HD V2 3D Extreme KV171
[MM534518EX3D]

New more powerful and more efficient generation of AXI brushless outrunners AXI 53xxV2 with integrated cooling system based on turbine effect keeps motor winding cooler up to 20%. Rotors are precise balanced on the most accurate Schenk balancing machine. New motors run quiter thanks to new high quality Japanese long lasting ball bearings. The hardened steel 8mm shaft is supported by three ball bearings, and the overall robust construction ensures a long service life.

AXI 5320/xx V2, 5325/xx V2 a 5330/xx V2 series are suitable for large sailplanes up to 10000g and sports aerobatic models up to 7000g in weight. New motor AXI 5320/18 was designed for 6s Lipols for 3D models up to 4300g and for Aerobatic models up to 5500g in weight. More powerfull improved motors AXI 5345/xx HD V2 are suitable for 3D models up to 7500g aerobatic models up to 10000g and large realistic flying models up to 15000g in weight. AXI53xx V2 motors offer front and reverse (radial) mounting options, and prop adapters for both mounting options are included as standard. Motor AXI 5325/24 V2 has been used especially for F3A competition aerobatics with great success.

These very efficient brushless motors with neodymium magnets and a rotating case are manufactured using the latest technology from the finest quality materials. The hardened steel 8mm shaft is supported by three ball bearings, and the overall robust construction ensures a long service life. Due to it’s high torque characteristics this motor is capable of turning large propellers with a high level of efficiency, and without the need for a gearbox. These motors are suitable for large sailplanes weighing up to 10000g and sports aerobatic models up to 7000g. The lack of gearbox noise makes these motors particularly suitable for scale models. AXI53xx V2 motors offer front and reverse (radial) mounting options, and two prop adapters for both mounting options are included as standard. The AXI5330/18 V2 has been used in F3A competition aerobatics with great sucess.

TECHNICAL SPECIFICATION

No. of cells: 8/12s Li-Poly
RPM/V: 171 RMP/V
Max. efficiency: 95%
Max. efficiency current: 25 - 63 A (>85%)
No load current: 1,5 A
Current capacity: 77 A/60 s
Internal Resistance: 42 mohm
Dimensions (∅ x L): 63x84.3 mm
Shaft diameter: 8 mm
Weight: 995 g
Max. Power: 3510 W

temporarily out of stock

Reviews

Customers who bought this product also purchased

MOTOR MOUNT RODS AXI 53XX AND AXI 81XX 60MM (4PCS) temporarily out of stock	Cockpit plastic closing temporarily out of stock	Silicone 0,35 qmm servos cable Futaba (5 m) temporarily out of stock
82 mm aluminium spinner. temporarily out of stock	SBEC 30 D temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
  Turbines->
  Electric->
    Brusehd->
    Brushless->
      Actro
      AXI->
        AXI Accesories
        AXI Spare Parts
      FOXY/RAY
      Glavak
      Hacker
      Hacker FES System
      JETI
      KAVAN
      Kontronik->
      Mega
      MP Jet
      MULTIPLEX
      MVVS
      O.S.
      Plettemberg
      RIPMAX
      ROI-Import
      Scorpion Motor
      T-Motor
      Top Model CZ
      Typhoon
    Accesorios
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

PowerBox SparkSwitch RS unregulated
69.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Xplorer3 anemometro
1 x	Xplorer1 anemometro
2 x	Xplorer2 anemometro
1 x	Xplorer4 anemometro
1 x	Pin type hinge Al 4,5x70 mm to wire (2 pcs)
1 x	Gates hinge aluminium (1 pcs)
1 x	15 mm reinforced hinge
1 x	Long pinned hinge (6 uds)
1 x	Gates hinge black 30x16 mm (2 pcs)
2 x	Nylon hinge for flaps 33x9 (2 pcs)
1 x	Small pinned hinge (12 uds)
3 x	Pin type hinge Al 3,0x50 mm demount (2 pcs)
2 x	Pin type hinge Al 3,0x50 mm (2 pcs)
1 x	Nylon hinge 20x15x0,3 (10 pcs)
1 x	Fast'n EZ-CA-Hinge (12 uds)
2 x	Gates hinge
2 x	67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Nylon hinge 20x20x0,3 (10 pcs)
1 x	76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Long pinned hinge (12 uds)
2 x	Unmounted aluminium pin 6x98 mm (2 pcs)
2 x	18 mm reinforced hinge
2 x	Micro flex hinge (12 uds)
1 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x	B4-0 rocket charges (6 pcs)
1 x	Black smoke bombs AX-60 (5 pcs)
1 x	BEC 3A FOXY
1 x	APM2.6 Power module with 5.3V DC BEC
1 x	"Y" charging 4mm wire (2 IN-1 OUT).
1 x	Adapter lead MPX/EC3
1 x	White smoke bombs AX-60 (5 pcs)
1 x	MPX-Dean "T" Adapter
1 x	Electric rocket starters (6 pcs)
1 x	Red smoke canister 65 g
1 x	Blue smoke canister 100 g
1 x	Smoke set "M"
1 x	TP/TopFuel - XH 2/3S Adapter
2 x	Green smoke canister 140 g
1 x	Red smoke bombs AX-60 (5 pcs)
1 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x	Red copper lacquer wire Ø0,2 mm (5 m)
1 x	CC 03
1 x	CM-3
1 x	CellPRO 4S Adaptader (GP/KO up to 4S)
1 x	Parachute expulsion foam
1 x	Futaba External voltage input cable Futaba CA-RVIN-700
1 x	Bec MR UBEC 5A (5v/6v/7v)
1 x	Parachutist
1 x	30 cm BEC cable (male)
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	White smoke bombs AX-18 (5 pcs)
1 x	Yellow smoke canister 65 g
1 x	"M" set
1 x	Initior Transmitter FTX2 Wireless
1 x	3l Smoke oil
1 x	Smoke set "S"
1 x	Mixers smoke bombs AX-60 (5 pcs)
1 x	Initior Receiver FRX2 Wireless
1 x	Yellow smoke canister 140 g
1 x	Hobbylite Filler, Balsa colour
1 x	Spray EC Red 400ml
1 x	Starter 12v (Max 180 and 30ccm)
1 x	XH female balance (5S) connector (2 pcs)
1 x	20x200 mm battery rings
1 x	Support Flush MPX Conector (6 pcs)
1 x	Gates hinge 30x16 mm (2 pcs)
2 x	43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	SkyMaxx 1.550 mm (kit)
1 x	IKARUS plane
1 x	Red smoke canister 100 g
1 x	EWC6 40 cm wing connector
1 x	Interruptor SPS 70v 60/120A
1 x	wing/fuselage connector for 16 pines AWG 20-24
1 x	Green smoke canister 100 g
1 x	Dean "T" - Futaba Adapter
1 x	Ventral support for AX-18/AX-60
1 x	Male connector for 16 pines AWG
1 x	Female connector for 16 pines AWG
1 x	White smoke bombs AX-9 (10 pcs)
1 x	LightBox SR
1 x	Pin type hinge Al 6x98 mm (2 pcs)
1 x	Sandwich carbon + poplar 2mm + carbon 290x160 mm
1 x	Panel Honeycom carbon 350x150x3.5mm
1 x	Teflon rollers 40 mm x 15 mm Diam.
1 x	Glass fibre braided sleeve (45mm) roll 20m
1 x	Sheet Depron Aero 1250x800x3 mm
1 x	PET film Mylar® A 350, 50 cm, roll/ 5 m
1 x	PVC plate 320 x 194 x 0.23 mm (brown)
1 x	Styrene plate 320x120x1.0 mm
1 x	Straightened rod Ø 1.5 mm x 1000 mm
1 x	Straightened rod Ø 2.5 mm x 1000 mm
1 x	Straightened threaded rod M3 - 1m
1 x	Threaded coupler M3 (10 uds)
1 x	Adapter 4,0 mm M6
1 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	Threaded coupler ALU M3 Ø 6 (2 uds)
1 x	Ball Link Plier
1 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x	Suncover 100cc Red
1 x	Spinner plastic white fixed propeller 30 mm
1 x	36 mm white plastic spinner for fixed propeller
1 x	VITAPROP CARBON FOLDING PROP 15x9.5"
1 x	Spinner plastic red fixed propeller 30 mm
1 x	Fibreglass-Spinner BS ∅155 x 200 mm
1 x	Spinner fixed propeller 42 mm / 5,0 mm
1 x	50 mm white plastic spinner for fixed propeller
1 x	Spinner plastic black fixed propeller 30 mm
1 x	42 mm black plastic spinner for fixed propeller
1 x	Actuador lineal HLS12-100210-7.4v
1 x	DRACO 2.0m PNP
1 x	Turbo Timber Evolution 1.5m PNP
1 x	Straightened rod Ø 1.2 mm x 1500 mm
1 x	40 mm servo arm with bearing (2 pcs)
1 x	89 mm double servo arm with bearing (2 pcs)
1 x	TWIST planeador gomas
1 x	BETA 1400 ARF Red
1 x	BETA 1400 RTF Red
1 x	JOKER 3 1550mm
1 x	Bird (Aero-naut)
1 x	Adapter 2,3 mm M5 for spinner 30 mm fixed propeller
1 x	Telemetry interface ALTIS 6 cm
1 x	48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x	Fibra de vidrio 80 g/m² (5 m x 100 cm)
1 x	Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 5 m
1 x	Fibra vidrio 25g 110 cm/ 10m (Interglass 02034, finish FE800 pl
1 x	Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 20m
1 x	Glass fabric 425 g/m² aero,10x1m
1 x	Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 1 m
1 x	6 mm Prop Adapter M8
1 x	Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x	Spring lock washer 4.1 mm (20 pcs)
1 x	Hexagonal Nut M3 (10 pcs)
1 x	Pan Head Screw M2x8 PH
1 x	Split pin 1x8 mm (10 uds)
1 x	Spring lock washer 2.6 mm (20 pcs)
1 x	Plastic wheels 36 mm (2 pcs)
1 x	Pulley brass 5/1,5 (2 pcs)
1 x	Wheel cover holder Ø 4 mm (2 uds)
2 x	Lock washer 3.2 mm (20 pcs)
1 x	Tapping Screw M2.9x9.5 (10 pcs)
1 x	Snap long M2 (10 uds)
1 x	Propeller APC 11x7 Glow/Gas
1 x	Propeller APC 11x4.7 SF Pusher
1 x	LED blink wire flashing (blue - 2pcs)
1 x	ASG 32 560 mm
1 x	HBC 10035-3 32-Bit
1 x	Glass fabric 163 g/m² 130cmx5m (Interglas 92105, aero, finish
1 x	Glass fabric 160 g/m² (Twill weave) 100 cm x 20m
1 x	Glass fabric 160 g/m² (Twill weave) 100 cm x 10m
1 x	Buy Perforated film 100 cm / 50 m
1 x	Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 3m
1 x	Fibra de vidrio 80 g/m² (2 m x 100 cm)
1 x	Glass fabric 80 g/m² (Interglas 05533, finish FK 144, twill weav
1 x	Fibra vidrio 25g 110 cm/ 20m (Interglass 02034, finish FE800 pl
1 x	Glass fabric 80 g/m² (silane, twill) 100 cm x 50m
1 x	Chopped glass fibre strands 3 mm
1 x	Glass fabric 80 g/m² (silane, twill) 100 cm x 10m
1 x	Chopped glass fibre strands 3 mm
1 x	Buy Perforated film 100 cm / 10 m
1 x	Chopped glass fibre strands 0.2 mm
1 x	Fibra vidrio 25g 110 cm/ 100m (Interglass 02034, finish FE800 p
1 x	Glass fabric 280 g/m² (twill weave) 100 cm, roll 50 m
1 x	Fibra de vidrio 80 g/m² (10 m x 100 cm)
1 x	Glass fabric 49 g/m² (1,27 x 10 m)
1 x	LED blink wire flashing (orange - 2pcs)
1 x	Quicklock washer 4 mm (10 pcs)
1 x	Tapping Screw M2.2x13 (10 pcs)
1 x	Aluminium coupler M2/2 with ball bearing (1 pcs)
2 x	Lock washer 2.2 mm (20 pcs)
2 x	Flat washer 4.3 mm (20 pcs)
1 x	Spring lock washer 2.1 mm (20 pcs)
1 x	5 mm Prop Adapter M8
1 x	Quicklock washer 2.5 mm (10 pcs)
1 x	Hexagonal Nut M4 (10 pcs)
1 x	5 mm Prop Adapter M6
2 x	Flat washer 2.2 mm (20 pcs)
2 x	Spring lock washer 3.1 mm (20 pcs)
1 x	Quicklock washer 3 mm (10 pcs)
1 x	Micro control horn T2 Ø 1
1 x	Plastic wheels 30 mm (2 pcs)
2 x	Flat washer 2.7 mm (20 uds)pcs)
1 x	Quicklock washer 1 mm (10 pcs)
1 x	Quicklock washer 2 mm (10 pcs)
1 x	Aluminium coupler M3/2 with ball bearing (1 pcs)
1 x	Landing gear strap small (4 uds)
1 x	Plastic wheels 28 mm (2 pcs)
1 x	Ball link V1 Ø7 M4/3 (6 uds)
1 x	Lock washer 2.7 mm (20 pcs)
1 x	Flat washer 3.2 mm (20 pcs)
1 x	Tapping Screw M2.9x13 (10 pcs)
1 x	Pulley brass 4/1,5 (2 pcs)
1 x	Horn micro type4 Ø 0,5 (2 pcs)
1 x	Screw-lock connector M2 (2 uds)
1 x	Pan Head Screw M2x6 PH
1 x	Tapping Screw M2.2x65 (10 pcs)
1 x	Micro control horn (2 pcs)
1 x	Split M1,2x10 (10 pcs)
1 x	4 mm Prop Adapter M6
1 x	Pulley brass 6/1,5 (2 pcs)
1 x	Aluminium coupler M2,5/2 with ball bearing (1 pcs)
1 x	Wheel cover holder Ø 6 mm (2 uds)
1 x	Quicklock washer 1.5 mm (10 pcs)
1 x	Pulley brass 2,5/1 (2 pcs)
1 x	Screw-lock connector Ø 2 mm (2 uds)
1 x	Tapping Screw M2.2x9.5 (10 pcs)
1 x	Wheel cover holder Ø 3 mm (2 uds)
1 x	Screw M2x6 (10 pcs)
1 x	Set propellers 10x4.5 SF Carbon Multicopter
1 x	Propeller APC 11x7 Electric
1 x	Propeller APC 10x3,8 SF
1 x	Propeller APC 12x4.5 MR
1 x	Propeller APC 10x6 Glow/Gas
1 x	70 mm INO spinner (carbon imitation)
1 x	75 mm INO spinner (carbon imitation)

7,898.26EUR