57.90EUR 39.90EUR

Glases Nimbus
[CMNIMBUS]



Set de gafas, cristales y trapo

Funda (inclu�da) para guardar todo
The Nimbus polarised set represents our top-of-the-range frame. Nimbus sunglasses have been specifically designed and manufactured for radio controlled modellers, with interchangeable lenses for different light conditions - with the Category 0 yellow lenses fitted, you can even enjoy the benefits of light enhancement on a cloudy day.

Polarised sunglasses greatly reduce glare, which is an effect caused by light hitting horizontally flat surfaces. Polarised lenses filter out this light to greatly enhance your visibility.

Other manufacturers of interchangeables rarely offer polarised lenses as standard - they certainly don't give you TWO sets for your money! For that reason, we believe our Nimbus glasses are some of the best value sports sunglasses on the market for ANY sport.

Featuring 100% UVA / UVB protection, these polycarbonate glasses benefit from an especially high-quality, wrap-around frame design that blocks unwanted and annoying light and wind from the sides. The scratch-resistant lenses are de-centred, which negates the possibility of distortion caused by the lens curvature. Conforming to US ANSI Z80.3 and British and European safety standard EN1836, our sunglasses are subjected to a drop-test at the factory, and offer great protection against flying debris should you suffer a mishap. All of our glasses carry the renowned European Union 'CE' compliance mark.

The interchangeable lenses are: yellow (category 1) low light - these actually enhance light and contrast; beige (category 2), polarised, average sunlight; (category 3) polarised, bright sunlight; dark smoked (category 4), very bright conditions.

All glasses come with 4 x sets of lenses as standard, a cleaning cloth and a carry case with belt clip and internal compartments for housing the extra lenses. Our latest stock also includes a neck / head strap.


enought units
enought units

Reviews

Customers who bought this product also purchased
Connectors banna oro 2 mm (M/F)
Connectors banna oro 2 mm (M/F)

enought units
enought units

Metal clevis M2 (10 uds)
Metal clevis M2 (10 uds)

enought units
enought units

Servo HITEC HS-55
Servo HITEC HS-55

enought units
enought units

Threaded coupler M2 (10 uds)
Threaded coupler M2 (10 uds)

enought units
enought units

Short ball link M2 (6 uds)
Short ball link M2 (6 uds)

enought units
enought units

500 ccm complete gasoline fuel tank
500 ccm complete gasoline fuel tank

enought units
enought units

We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Carbon fiber flat 1000x6.0x0.8 mm
1 x Carbon fiber rod 8.0 mmx1000 mm
1 x Carbon fiber rod 0.5 mmx1000 mm
1 x Carbon fiber rod 12 mm x 1000 mm
1 x Carbon fiber rod 10 mm x 1000 mm
1 x Carbon fiber rod 5.0 mmx1000 mm
1 x Carbon fiber rod 4.0 mmx1000 mm
1 x Squared carbon wing joinner 5x5x220 mm
1 x Carbon fiber flat 1000x3.0x0.13 mm
1 x Carbon fiber rod 7.0 mmx1000 mm
1 x Carbon fiber rod 2.5 mmx1000 mm
1 x Carbon fiber flat 1000x3.0x0.5 mm
1 x Carbon fiber rod 0.5 mmx1000 mm
1 x Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
1 x Carbon fiber rod 3.0 mm x 1000 mm
1 x Carbon fiber rod 6.0 mmx1000 mm
1 x Carbon fiber rod 1.5 mm x 1000 mm
1 x Carbon fiber rod 14 mmx1000 mm
2 x ABS Strip 1.5x4.0x1000 mm
1 x Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x Round Rod 2,0x1000 mm
1 x Strip ABS 2.0x3.0x1000 mm
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x ABS Strip 1.0x4.0x1000 mm
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
2 x ABS Strip 1.5x8.0x1000 mm
1 x Carbon Non-Woven, 160 g/m² 100 cm 5m
1 x ABS Strip 1.0x2.0x1000 mm
1 x Round Rod 3,0x1000 mm
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
2 x Round Rod 1,5x1000 mm
1 x Strip 2,0x2,0x330 mm
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
1 x Round Rod 4,0x1000 mm
1 x Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
2 x Strip 1,5x1,5x330 mm
1 x Carbon Non-Woven, 160 g/m² 100 cm 10 m
1 x 67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x Pin type hinge Al 4,5x70 mm to wire (2 pcs)
1 x Micro flex hinge (12 uds)
2 x Pin type hinge Al 6x98 mm (2 pcs)
1 x Fast'n EZ-CA-Hinge (12 uds)
1 x Pin type hinge Al 3,0x50 mm (2 pcs)
1 x 67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x Pin type hinge Al 4,5x70 mm (2 pcs)
1 x Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x Nylon hinge 15x0,3 (10 pcs)
1 x Long pinned hinge (12 uds)
1 x Gates hinge 30x16 mm (2 pcs)
1 x Nylon hinge for flaps 33x9 (2 pcs)
1 x 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x Long pinned hinge (6 uds)
1 x Pin type hinge Al 4,5x70 mm demount (2 pcs)
2 x Fast'n EZ-CA-Hinge, lite (12 uds)
2 x 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x Miniature brass strap hinge, 1 m
2 x Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x Gates hinge aluminium (1 pcs)
1 x Nylon hinge 20x20x0,3 (10 pcs)
1 x Gates hinge black 30x16 mm (2 pcs)
1 x 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x 48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x Small pinned hinge (12 uds)
1 x Crimping sleeves for cable 1.3 mm (10 pcs)
1 x Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x Locking cable tie 3.2x142 (uds)
2 x Canopy Lock V1 M3 Red (2 pcs)
1 x Cabin latch Fox MDM1 4m (pair)
1 x One touch canopy lock
2 x Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x Electric spoiler 250 mm (2 pcs)
2 x L cockpit anchor "tipe F3A" (2 pcs)
1 x Steering arm 12 mm Ø 4 mm (2 uds)
1 x Stainless steel cable Ø 0.5 mm (10 m)
1 x Screw-lock connector M2 (2 uds)
1 x Screw-lock connector Ø 2 mm (2 uds)
1 x Crimping sleeves for cable 0.85 mm (10 pcs)
1 x Steering arm 16 mm Ø 4 mm (2 uds)
1 x Crimping sleeves for cable 0.70 mm (10 pcs)
1 x Covered closure or fairings
1 x 1000 ml sealer (DOPE)
1 x Vacuum Connection VA 1 (for hose Ø 6 mm)
1 x Ventus 1:4 set of instruments
1 x Propeller balancer
1 x ABS "T" angle 10.0x10.0x1000 mm
1 x CC 03
1 x Tapa estado carga XT-60 (6 pcs)
1 x Air pressure gauge
1 x Y-Hose connector 6-6-6 mm
1 x Angled clevis with threaded rod M3
1 x Quick hose connector 4-4 mm
1 x Fail Safe air retract
2 x Panasonic Eneloop AA 1,2 V battery 19>00 mAh
1 x Xplorer4 anemometro
1 x SCHARNHORST accessories
1 x La Capitania di Venetia 1:50
1 x Robbe Modellsport ROOKIE 35 ESC FOR BRUSH MO TORS
1 x LO 100 Scale 1:2 - Modellbau Bruckmann
1 x LO 100 ARC 3.3m,cabina
1 x Fournier RF-4D
1 x Cable grommet Ø 3.2 mm (4 uds)
1 x DG-303 ACRO 3750 mm, canopy
1 x Glider STROLCH
1 x PowerBox PIONEER incl. microSwitch
1 x PowerBox Champion SRS
1 x OLED-Display for PowerBox Mercury SRS
1 x BlueCom™ Adapter (iOS)
1 x SPARK Switch 5.9v
1 x Power Box GPS Sensor III
1 x PowerBox iGyro SAT
1 x External LED's (2 pcs)
1 x PowerBox Cockpit SRS (incl. SensorSwitch)
1 x Battlife Guard 2s
1 x E-FUN BUG (ROI-Import)
1 x Glider KNIRPS
1 x XICOY X45 rail
1 x Glidder Mü13e (Bergfalke)
1 x UMX™ Whipit™ DLG BNF Basic (E-flite)
1 x PowerBox iGyro 3xtra
1 x PowerBox 12
1 x Wings Bags JEEMO
1 x Fiberglass plate 350x150x4.0 mm
2 x Round Rod 1,25x1000 mm
1 x Sandwich carbon + poplar 2mm + carbon 480x290 mm
1 x Glass fabric 25 g/m² (1 m²)
1 x Thermoforming sheet 0.3mm (0.039in) DIN A4
2 x Thermoforming sheet 0.5mm (0.02in) DIN A4
1 x Strip 2,5x1,25x330 mm
1 x Foam plastic plates (310x210x5 mm)
1 x Sandwich Carbon fibre Rohacell (800 x 280 x 3 mm)
1 x Breatex™ Non-woven absorber 300 g/m² Roll 41 m
1 x Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M
1 x ABS Strip 1.5x6.0x1000 mm
1 x Styrene plate 320x120x0.5 mm
1 x Boxed KIT OF 7 Rotary Burrs FINE
1 x PROXXON - DRILL SET 0,5-3,2MM (10PCS.)
1 x Set brocas Ø 1.5-2.0-2.5-3.0 mm (4 pcs)
1 x Propeller diller for DA50, DLE55 red
1 x Soldering tip for KAVAN soldering iron KAV66.8338
1 x Set brocas Ø 1.2-1.4-1.6-1.8 mm (4 pcs)
1 x Set brocas Ø 0.4-0.6-0.8-1.0 mm (4 pcs)
1 x Tachometer HANGAR 9 digital
1 x 25 mm Sandpaper file
1 x Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs)
2 x Styrene plate 320x120x1.0 mm
1 x Fiberglass plate 350x150x2.5 mm
2 x Round Rod 6,0x1000 mm
2 x Fiberglass plate 350x150x1.0 mm
1 x Fiberglass plate 350x150x1.5 mm
1 x Glass fibre sleeve Ø 20 mm
1 x ABS Strip 1.5x3.0x1000 mm
1 x Strip 3,5x1,75x330 mm
1 x Sandwich carbon + poplar 4mm + carbon 290x160 mm
1 x Strip ABS 2.0x8.0x1000 mm
1 x Foam plastic plates (310x210x3 mm)
1 x Round Rod 1,0x1000 mm
1 x Carbon plate 550x350x2.5 mm ECOTECH
1 x ABS Strip 1.0x3.0x1000 mm
1 x GPS Logger Dymond
1 x ABS 500 x 400 x 1 mm (white)
1 x Small flex hinge (12 uds)
1 x Small pinned hinge (6 uds)
1 x Gates hinge
1 x Steering arm 16 mm Ø 4 mm
1 x Control for forward wheel (MINI)
1 x Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x Snap pin for micro clevis (10 uds)
1 x Medium pin type hinge (12 uds)
1 x Round flex hinge (12 uds)
1 x Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x Wheel FEMA 165 mm / 8 mm
1 x Aluminun wheel collar 6 mm Ø (4 uds)
1 x Aluminun wheel collar 5 mm Ø (4 uds)
1 x Nylon threaded block M6 (2 uds)
1 x Dual Sequencer Gear and Canopy
1 x Festo 4mm Tubing Holder (10 uds)
1 x Nylon gear block Ø 3 mm (2 uds)
1 x Landing gear clamp for Ø 4 mm (4 uds)
1 x Starter 12v (Max 180 and 30ccm)
1 x Z Bender - S Type Tool
1 x Baseplate servo
1 x Cyano SUPER - GOLD™ (12g)
1 x Xplorer2 anemometro
1 x Spinner 90 mm GFK
1 x Spinner 105 mm CFK
1 x Spinner 125 mm GFK
1 x Spinner 159x200 mm GFK
1 x Landing gear axle Ø 6 mm (2 uds)
1 x 400 Newtons FEMA absorber
1 x 300 Newtons FEMA absorber
1 x Landing gear axle Ø 8 mm (2 uds)
1 x Gearwheel 9724/09 for ZG 45
1 x Wheel FEMA 178 mm / 8 mm
1 x Wheel FEMA 152 mm / 8 mm
1 x Servo holder for retract
1 x L-shaped servo mount
13,028.45EUR
Manufacturers
Languages
Español English
Currencies