Top » Catalog » Motors & Turbines » Electric » Brushless » KAVAN » KAV30.1638C

120.00EUR

Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB
[KAV30.1638C]

Combo set of BLS motor with 80A ESC for model aircraft: glider 2200g, trainer 2100g, acro 1800g, 3D 1200g, KV1150 rpm per V, power supply Lixx 3-4s, shaft 5 mm.

Outrunner brushless electric motor for model aeroplanes: glider 2200g, trainer 2100g, acro 1800g, 3D 1200g, KV1150 RPM/V, input voltage 3-4S Lixx. 5.0mm shaft. Alternative designation based on the stator dimension: 2820-1150. KAVAN PRO series motors are high performance 14-pole brushless outrunners. State-of-the-art design, hardened steel shafts, high quality ball bearings, High grade material used for stators and rotors ensure long lifetime and unbeatable performance and high efficiency. KAVAN PRO series motors are low revolution/high torque electric motors capable of swinging large diameter propellers without need for a gearbox.
KAVAN PRO 3542-1150 is a motor for model aeroplanes up to 2200 g all-up weight powered by 3-4S LiPo flight battery pack. It is great for faster 2000-2500 mm electric powered gliders, 1400-1500 mm high wing trainers, scale and aerobatic models.
Motor installation: KAVAN 3542-1150 has been designed both for the front and radial mount installation. Front mount: Use four M3 screws; these may not go deeper than 3-4 mm into the front case. Radial mount: Use four M3 screws to secure the mounting cross to the firewall. The firewall should be made of 4.0-5.0 mm plywood. The radial mount set is supplied with the motor.
The motor set contents: KAVAN PRO 3542-1150 motor w. cables (3.5 mm gold-plated connectors), radial mount set accessories. The full instruction manual can be downloaded here: KAVAN PRO Brushless Motors Instruction Manual
Note: Alternative designation based on the stator dimensions: 2820-1150.
Powering LiXX cells 3 - 4
RPM/V [ot./min/V] 1150
Max. power (180 s) [W] 1000
Internal resistance [mOhm] 16
Open-circuit current (při 10 V) [A] 2.7
Max. peak current (180 s) [A] 70
Diameter [mm] 35.2
Length [mm] 41
Length celková [mm] 63.5
Shaft diameter [mm] 5
Weight [g] 141
Poles count 14
Timing [°] 20 - 25
ESC [A] 70 - 80
Weight of glider (up-to) [g] 2200
Weight of trainer (up-to) [g] 2100
Weight of acrobat (up-to) [g] 1800
Weight of 3D (up-to) [g] 1200
Doporučená vrtule 3S: 11x8"-12x6"
4S: 9x6"-10x5.5”

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
  Turbines->
  Electric->
    Brusehd->
    Brushless->
      Actro
      AXI->
      FOXY/RAY
      Glavak
      Hacker
      Hacker FES System
      JETI
      KAVAN
      Kontronik->
      Mega
      MP Jet
      MULTIPLEX
      MVVS
      O.S.
      Plettemberg
      RIPMAX
      ROI-Import
      Scorpion Motor
      T-Motor
      Top Model CZ
      Typhoon
    Accesorios
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

ProgBox PRO LCD Hobbywing
44.90EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	L-Connector 4.0 mm x 1000 mm
2 x	290 mm 290 mm M5x18 mm shaft ship
1 x	Kardan Black (without pinions)
1 x	Rigid coupling brass Ø 5.0 / 4.0 mm L: 25 mm
2 x	Propeller RABOESCH M4 45 mm (3 Blades pr) (Right)
1 x	Rigid coupling brass Ø 4.0 / 2.3 mm L: 20 mm
1 x	Rigid coupling brass Ø 3.0 / 2.3 mm L: 20 mm
1 x	Rigid coupling brass Ø 2 mm L: 15 mm
3 x	270 mm 3/3 mm shaft ship
1 x	Propeller RABOESCH M4 30 mm (3 Blades) (Right hydropropeller)
1 x	L-Connector 1.0 mm x 1000 mm
1 x	U Profile ABS 5,0x10,0x1000 mm
1 x	Propeller RABOESCH M3 50 mm (3 Blades pr) (Right hydropropeller)
1 x	U Profile ABS 1,0x2,0x1000 mm
1 x	T-Connector 4.0 mm x 1000 mm
1 x	Rigid coupling brass Ø 3 mm L: 20 mm
1 x	261 mm M4/M4 6.0x4.0 mm shaft ship
1 x	290 mm M4 7/8x212 mm shaft ship
1 x	Rigid coupling brass Ø 4.0 / 3.2 mm L: 25 mm
1 x	L-Connector 1.5 mm x 1000 mm
1 x	Flat Connector 4.0 mm x 1000 mm
1 x	290x4 mm M4 shaft ship
2 x	U Profile ABS 2,0x4,0x1000 mm
1 x	Propeller RABOESCH M4 40 mm (3 Blades) (Right hydropropeller)
1 x	Spare Shaft Ø4mm L:450x23mm M4
1 x	Propeller RABOESCH M4 40 mm (3 Blades) (Left hydropropeller)
1 x	U Profile ABS 8,0x4,0x1000 mm
1 x	Rudder 107-06
2 x	Rigid coupling brass Ø 4 mm L: 25 mm
1 x	U Profile ABS 3,0x6,0x1000 mm
1 x	Propeller RABOESCH M3 50 mm (3 Blades pr) (Left hydropropeller)
1 x	Extractor piñones 2.3/3.2 mm
1 x	ABS I Strip 20x10x1000 mm
2 x	ABS Strip 1.0x5.0x1000 mm
1 x	Round Rod 1,0x1000 mm
1 x	ABS I Strip 10x5x1000 mm
1 x	ABS Strip 1.0x3.0x1000 mm
1 x	Round Rod 1,5x1000 mm
1 x	Beech dowels 10 mm x 1000 mm
1 x	Balsa panel 2.5x100x1000 mm
1 x	A/C quality beech plywood 600x300x0.8 mm
1 x	A/C quality beech plywood 600x300x1.5 mm
1 x	Balsa panel 1.0x100x1000 mm
1 x	A/C quality beech plywood 600x300x0.8 mm
1 x	BALSA trip 3.0x5.0x1000 mm
1 x	A/C quality beech plywood 600x300x5.0 mm
1 x	LOWER TOW HOOK
1 x	Carbon fiber rod 8.0 mmx1000 mm
1 x	Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
1 x	Carbon fiber flat 1000x3.0x0.13 mm
1 x	Squared carbon wing joinner 5x5x220 mm
1 x	Carbon fiber rod 2.0 mmx1000 mm
2 x	Carbon fiber rod 1.5 mm x 1000 mm
1 x	Carbon fiber rod 10 mm x 1000 mm
1 x	Carbon fiber rod 7.0 mmx1000 mm
2 x	Carbon fiber flat 1000x3.0x0.5 mm
1 x	Carbon fiber rod 0.5 mmx1000 mm
1 x	Carbon fiber rod 1.5 mm x 2000 mm
1 x	Carbon fiber rod 4.0 mmx1000 mm
1 x	Carbon fiber rod 2.5 mmx1000 mm
1 x	Carbon fiber rod 3.0 mm x 1000 mm
1 x	Carbon fiber rod 5.0 mmx1000 mm
1 x	Carbon fiber rod 0.5 mmx1000 mm
1 x	Carbon fiber rod 0.8 mmx1000 mm
1 x	Carbon fiber flat 1000x6.0x0.8 mm
1 x	SE Ring 250 mm (2 pcs)
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x
1 x	SE Ring 350 mm (2 pcs)
2 x	SE Ring 330 mm (4 pcs)
1 x	SE Ring 400 mm (2 pcs)
1 x	Tape GFK 25 mm
1 x	Ring 320 mm length (5 pcs)
2 x	SE Ring 480 mm (2 pcs)
1 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x	SE Ring 300 mm (2 pcs)
1 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x	SE Ring 240 mm (2 pcs)
1 x	Tape GFK 38 mm
1 x	Cinta Goldfix 1m
1 x	SE Ring 200 mm (2 pcs)
1 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Foil for sticking flaps and ailerons
1 x	Spray EC Red 400ml
1 x	800TVL CMOS camera for FPV
1 x	PPM Encoder Module
1 x	1/6 Pilot "Buddy"
1 x	Conector Servo female 4 pines
1 x	Blue silicone 0,5 qmm wire (50 m)
1 x	Fiberglass heat shield Ø 8 mm 1000 mm
1 x	Gracia Maxi ARF, bags (Top Model)
1 x	Antenna holder bracket double
1 x	Ion Pro NG electric with flaps GREEN Fluor (JP Model)
1 x	Adap/Exten for Futaba 12-14C
1 x	4 mm Prop Adapter M6
1 x	5 mm Prop Adapter CN-Spinner
1 x	XICOY X45 rail
1 x	2 mm Prop Adapter M6
1 x	3.2 mm Prop Adapter M8
1 x	PVC plate 320 x 194 x 0.23 mm (brown)
1 x	ABS rectangular profile 12x6.0x1000 mm
1 x	ABS tube 4.0x2.0x1000 mm
1 x	Profile ABS triangular 4.0x1000 mm 60º
1 x	BABY glider (Aero-naut)
1 x	Coupling for 3,2 mm axis
1 x	Profile ABS Square 2 x 1000 mm
1 x	Round Rod 1,25x1000 mm
1 x	ABS tube 5.0x4.0x1000 mm
1 x	Glider PIROL
1 x	Strip ABS 2.0x3.0x1000 mm
1 x	Coupling for 3 mm axis
1 x	ABS "T" angle 8.0x8.0x1000 mm
1 x	Chili Race F3K 2 wing servo mounted(carbon biax)
1 x	Chili F3K 2 wing servo mounted
1 x	Strip 2,0x2,0x330 mm
2 x	120x60 mm SLH KOVO wheel
1 x	Strip ABS 2.0x5.0x1000 mm
1 x	VAGABOND 1500 mm ARF V2 (Red)
1 x	TAKEO 3.6m electric
2 x	290 mm M5 Prop shaft
1 x	Head core bushing
2 x	Carbon fiber rod 1.5 mm x 1000 mm
1 x	Blade holder metal LAMA
1 x	V tail SILENT DREAM 2.200 mm (Elec or Glider)
1 x	Blade Holder Full (4 blades)
1 x	Head lower part
1 x	Cierva C30 simulated motor
1 x	Complet landing gear
1 x
1 x	ORACOVER Ferrari red (2 m)
1 x	Screw M2.5x10 (10 pcs)
1 x	Hexagonal Nut M3 (10 pcs)
1 x	Screw M3x12 (10 pcs)
1 x	Pan Head Screw M2x8 PH countersunk head
1 x	Pan Head Screw M2x6 PH
1 x	Pan Head Screw M1,6x6 (10 pcs)
1 x	Screw M2.5x5 (10 pcs)
1 x	Tapping Screw M2.2x9.5 (10 pcs)
1 x	Nut for mounting M4 (4 pcs)
1 x	Swashplate metal LAMA
1 x
1 x	Blade holder upper
1 x	Head runner
1 x	Motor mount class 48"
1 x	Indoor Brushed motor kit
1 x	Fuselage Autogyro RAINBOW
1 x	Carbon fiber rod 6.0 mmx1000 mm
1 x	Carbon fiber rod 1.0 mm x 1000 mm
1 x	Screw M3x16
1 x	Screws flush mount M2
1 x	Baering 3x8x4
1 x	Raer wall
1 x	Radial heatsink for MPJ AC25/35-xx motor
1 x	SE Ring 450 mm (2 pcs)
1 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	SE Ring HACKER 300 mm (2 pcs)
2 x	Transmitter Crystal 35 Mc/s Ch 62
1 x	Mudguard for 140/165 mm wheels
1 x	Aluminun wheel collar 2 mm Ø (4 uds)
1 x	Aluminun wheel collar 3 mm Ø (4 uds)
1 x	Propeller APC 13x4 Electric
1 x	Propeller APC 13x4 Electric Pusher
1 x	Propeller APC 10x7 SF
1 x	Propeller APC 10x5.5 MR Electric multirrotor
1 x	White 2,4 GHz antenna exit guides (2 pcs)
1 x	Propeller RABOESCH M4 60 mm (5 Blades) (Right hydropropeller)
1 x	Canopy Latch
1 x	Adjustable brass horn threaded M3
1 x	Propeller RABOESCH M4 55 mm (5 Blades) (Left hydropropeller)
1 x	Spinner fixed propeller 60 mm / 5,0 mm
1 x	MZ-10, 5 Channel HoTT
1 x	Propeller RABOESCH M5 130 mm (4 Blades) (Left hydropropeller)
1 x	Thruster propeller 30/33 mm with motor 400 7,2V
1 x	X-RAY Micro QR (Fuselage with canopy)
1 x	Propeller RABOESCH M5 80 mm (4 Blades) (Left hydropropeller)
1 x	X-RAY Micro QR (Elevator)
1 x	Flap hinge (6 pcs)
1 x	MZ-12, 6 Channel HoTT
1 x	EXTRA NG 85" 2159mm red/white
1 x	Propeller G-Sonic 20x8
1 x	Set stickers JEEMO "Andy"
1 x	Motor OS 3805-1200 electric
2 x	Motor OS 3820-1200 electric
1 x	Fox 4000 mm Airworld,cabina
1 x	Fuselage Bags JEEMO
1 x	JEEMO Kit ARF Basic (2 color Carbon finish) XTRALIGHT
1 x	Jeemo Dolly
1 x	PRESTIGE 2PK
1 x	Propeller APC 12x6 Electric Pusher
1 x	Propeller APC 12x3.8 SF
1 x	Propeller APC 11x10 Electric
1 x	Propeller APC 10x4.7
1 x	Propeller APC 11x4.7 SF Pusher
1 x	Propeller APC 11x4.5 Electric Pusher
1 x	Propeller APC 12x10 Electric
1 x	Propeller APC 10x4.7 SF Pusher
1 x	Propeller APC 10x6 Electric
1 x	Propeller APC 10x3,8 SF Electric Pusher
1 x	Propeller APC 11x5.5 Electric
1 x	Propeller APC 11x8.5 Electric

8,756.28EUR