1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Extractor piñones 2.3/3.2 mm
1 x Aramid 50 daN 50 m
1 x Trike XL motor set (motor+esc+prop)
1 x Rescue 1,8m2 / BackPack
1 x Parachute P4
1 x Paramotor BackPack XXS (without accessories)
1 x Paramotor Trike XL
2 x Paramotor BackPack XXS 2
2 x Opale Rucksack
3 x Para-RC Trike "RC-Bullix"
2 x Parachute PV6 for F3J
1 x ABS tube 9.0x8.0x1000 mm
1 x ABS tube 18.0x16.0x1000 mm
1 x ABS tube 20.0x18.0x1000 mm
1 x ABS tube 10.0x8.0x1000 mm
1 x CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
1 x ABS tube 6.0x5.0x1000 mm
1 x ABS tube 16.0x14.0x1000 mm
1 x ABS tube 7.0x5.0x1000 mm
1 x ABS tube 4.0x3.0x1000 mm
1 x Horn 6/35 with M3 Bearing
2 x 6 mm red aluminium threaded horn with patella
1 x Horn 6/20 with M3 Bearing
3 x Threaded coupler ALU Left M3 Ø 4 (2 uds)
2 x Horn with ball 40x30
1 x Cable with accesories
1 x 20 mm carbon horn
2 x Threaded coupler ALU M3 Ø 4 (2 uds)
1 x Threaded coupler ALU M3 Ø 6 (2 uds)
4 x Threaded coupler ALU M2,5 Ø 3 (2 uds)
2 x Threaded coupler ALU Left M2,5 Ø 3 (2 uds)
2 x Horn 13,5x16 mm (2 pcs)
3 x Threaded coupler ALU M3 Ø 5 (2 uds)
1 x Small aluminium horn gold (2pcs)
3 x 6 mm blue aluminium threaded horn with patella
1 x 6 mm aluminium horn with patella
3 x SlowFlyer control horn (3 pcs)
1 x LH long aluminium horn L31xH30 (2pcs)
1 x Brass control horn M2 short for wire (2 pcs)
2 x Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x Brass control horn M4 short for wire (10pcs)
3 x Brass control horn M4 short for wire (4 pcs)
1 x Horn 5/10 with M2 Bearing
2 x Horn 20x28,5 mm (2 pcs)
1 x RH long aluminium horn (2pcs)
1 x Cap closure 33/23.5mm (2 uds)
1 x Cabin latch Fox MDM1 4m (pair)
1 x Crimping sleeves for cable 0.85 mm (10 pcs)
1 x Stainless steel cable Ø 0.5 mm (2 m)
1 x Canopy Latch
1 x Steering arm 16 mm Ø 3 mm (2 uds)
1 x Cierre cabina aluminio Ø4, I=10 mm
1 x SUS wire 3m (nylon coated)
1 x Stainless steel cable Ø 0.62 mm (10 m)
1 x Stainless steel cable Ø 0.5 mm (10 m)
1 x Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x Crimping sleeves for cable 0.70 mm (10 pcs)
1 x Steering arm 16 mm Ø 3 mm
1 x Steering arm 12 mm Ø 4 mm
1 x Locking cable tie 2.5x100 (uds)
1 x Crimping sleeves for cable 1.3 mm (10 pcs)
1 x Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
3 x Covered closure or fairings
1 x Screw-lock connector Ø 2 mm (2 uds)
2 x Steering arm 16 mm Ø 4 mm
2 x Horizontal cockpit anchor "tipe F3A" (2 pcs)
2 x Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x Aluminium alloy coupler for carbon tube 6/M4
1 x EC5-Set male, simple quality, 2 x female pin, 1 x blue housing
1 x Connectors banna oro 8,0 mm 5 pcs(Female)
1 x Fresa corte diamante Ø 2.3mm (bola)
1 x Extra Hard Titanium Herxagon Screwdrivers
1 x SE Ring 350 mm (2 pcs)
2 x Windsock Ozone L -1200 mm
2 x Parachute BACKUP X100
2 x Windsock Ozone L - 700 mm
1 x T-Motor U7-V2.0 Kv420
1 x TS832 to Gopro AV/Power Cable DJI Phantom 2 Compatible
1 x TS832 to Gopro AV/Power Cable
1 x Para-RC "RC-Evo-Cross" Rescue
1 x Wing OXY 5,0 m2
1 x Small aluminium horn red (2pcs)
1 x Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x Long adjustable aluminium control horn 2,8x24
1 x Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø7.1 m)
1 x Horn micro type4 Ø 0,5 (2 pcs)
1 x Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x Small adjustable control horn with bearing
2 x Rudder forward 90x28 "type Kato"
1 x Sistema LDS - Ø12 mmr servos Ø 6/25 spline 60º (Futaba) pitch 6
1 x 6 mm M3 variable horn
2 x Short adjustable control horn 3x24
1 x Hard brass tubing (L 1000 mm, Ø18.0 mm, Ø16.0 mm)
2 x Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm
1 x LO 100 Scale 1:2 - Modellbau Bruckmann
1 x DG-303 ACRO 3750 mm, winglets
1 x Horn DUBRO 1/2A
1 x Fiberglass tube 6/4x1000mm
1 x Micro control horn (2 pcs)
1 x Horn with ball 55x40
2 x Threaded coupler ALU M2 Ø 4 (2 uds)
1 x Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø6.1 m)
1 x Horn 6/27 with M3 Bearing
1 x Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm)
1 x Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch
1 x Horn 16,5x20 mm (2 pcs)
1 x Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm)
1 x Small aluminium horn blue (2pcs)
1 x 38x4,5 mm wires output (2 pcs)
1 x Fully Threaded Steel Rod alumin 70 mm M2,5 (2 pcs)
1 x Steering arm 16 mm Ø 4 mm (2 uds)
1 x Paramotor Kit Camo H1.5/ Ben Red
1 x MAX pilot ARTF
1 x Ballast 700gr OPALE
1 x AXI 2204 Multicopter
1 x ESC ALPHA 60A HV
1 x Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CCW th
1 x 1804 2400KV Brushless Motor Qav 250 mini
1 x Para-RC Mix
1 x Wing OXY 0,5 pulgadas2
1 x Medidor ángulos y/o incidencias
1 x Aluminum Bayonet / strongal D35 mm / 1 m
1 x Sanyo Eneloop AA 1,2 V battery 2000 mAh
1 x Gobe R-26S (Airwold)
1 x Ball Link Plier
1 x ASK 21 6.5m + pylona
1 x 48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x L cockpit anchor "tipe F3A" (2 pcs)
1 x Xplorer4 anemometro
1 x Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x Xplorer1 anemometro
1 x Starter 12v (Max 90 and 15ccm)
1 x Z Bender - S Type Tool
1 x Starter 12v (Max 180 and 30ccm)
1 x DUPLEX 2.4EX Central Box 320 + 2x Rsat2 + RC Switch
1 x Adapter 3,2 mm M8
1 x DPSI Micro - RCS RV
1 x JETImodel SINGLE BEC
1 x BOSCH spark plug cap for DA 50-R, DA 100 and DA 150
1 x Hand Pads for Tray JETI
1 x DUPLEX 2.4EX Central Box 210
1 x Teacher / Student Cable
1 x Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 m
1 x 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Indoor hinge with servo arm integraded
1 x Long extra-strong control horn with bearing 2,8x34
1 x Receiver Crystal 35 Mc/s Ch 62
1 x Horn mando long (2 pcs)
16,194.22EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies