1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
3 x Profile ABS Square 4 x 1000 mm
3 x Profile ABS half cane 3x1000 mm
2 x Profile ABS half cane 6.0x1000 mm
1 x ABS "T" angle 8.0x8.0x1000 mm
1 x Profile ABS triangular 4.0x1000 mm 90º
1 x L-Connector 1.0 mm x 1000 mm
1 x ABS angle 1.5x1.5x1000 mm
1 x L-Connector 1.5 mm x 1000 mm
2 x ABS angle 2,0x2,0x1000 mm
1 x ABS "T" angle 6.0x6.0x1000 mm
2 x ABS rectangular profile 10x5.0x1000 mm
1 x Profile ABS half cane 4x1000 mm
1 x ABS angle 3,0x3,0x1000 mm
2 x ABS rectangular profile 12x6.0x1000 mm
2 x Rubber profile 10-2 mm 2M
1 x ABS angle 6,0x6,0x1000 mm
1 x ABS angle 4,0x4,0x1000 mm
1 x L-Connector 4.0 mm x 1000 mm
2 x Profile ABS half cane 8.0x1000 mm
1 x ABS angle 10,0x10,0x1000 mm
1 x Profile ABS half cane 2.5x1000 mm
2 x Profile ABS half cane 2.0x1000 mm
1 x Profile ABS Square 1 x 1000 mm
1 x Cross Connector 4.0 mm x 1000 mm
1 x Profile ABS half cane 4x2.5x1000 mm
1 x Profile ABS triangular 4.0x1000 mm 60º
1 x Flat Connector 4.0 mm x 1000 mm
1 x Profile ABS triangular 2.0x1000 mm 90º
3 x Rubber profile 6-2 mm 2M
1 x Streamline Stainless Steel Tubing 10.5x5.7x1000 m
1 x ABS "T" angle 2.0x2.0x1000 mm
3 x Towing hook
2 x Towing hook <3m
3 x Towing hook
2 x Streamline Stainless Steel Tubing 6.3x3.5x1000 mm
1 x Streamline Stainless Steel Tubing 19.5x9.8x1000 mm
1 x USB Mini Camera endoscope
2 x Ferrita 17x10x6.5 mm
1 x Ferrita 14x8x5.5 mm
1 x Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
3 x Ferrita 27x14x7 mm
2 x Ferrita con funda
2 x Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
2 x Tape GFK 50 mm
1 x Circlik for shaft 2.3 mm (10 pcs)
2 x Pilot "Anthony" (Slimline)
1 x Oratex Red Fokker 10 m
1 x Oracover Azul 2 m
1 x Brass hexagonal rod Ø 5 mm x 1000 mm
1 x Aluminium coupler M3/2 with ball bearing (1 pcs)
1 x T-Hose connector 3-3-3 mm
1 x Indoor landing gear set
1 x Support Pitot JETI
1 x Retract undercarriage for gliders up to 2 Kg
1 x Retract undercarriage for gliders up to 3,5 Kg
1 x 290x4 mm M4 shaft ship
1 x 200 Newtons FEMA absorber
1 x ABS "T" angle 4.0x4.0x1000 mm
1 x Landing gear axle Ø 6 mm (2 uds)
2 x SERVO HOLDER
1 x LOWER TOW HOOK
1 x Servo DITEX TD2612S
2 x 1/12 Pilot "Tom"
1 x 1/4 Pilot "Heidi"
2 x 1/12 Pilot "Fighter"
2 x 1/6 Pilot "Cindy"
2 x 1/10 Pilot "Jimmy"
1 x Rubber profile 8-2 mm 2M
1 x Profile ABS Square 2 x 1000 mm
1 x 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x Servo KST X20-7512 V8.0 82kg 8.4v
1 x SE Ring 400 mm (2 pcs)
2 x Servo Robbe FS 525 BB MG HV
1 x Futaba S3010 Servo - Standard BB 0.16s/6.5kg
1 x Servo KST X10-710 V8.0 7.5Kg HV
1 x Cinta Goldfix 1m
1 x Blue aluminium servo arm V2-Hitec 1,25 inch M3
1 x Servo SAVOX SV-1254 MG HiVolt Low Profile
1 x Servo FUTABA BLS173 SV
1 x Futaba BLS255/272/471SV - Gear Set
1 x SE Ring 480 mm (2 pcs)
1 x SE Ring 330 mm (4 pcs)
1 x Soporte servo KST X08/H and Plus
1 x Servo BLS-M55B 61.2kg
1 x Servo KST BLS815 HV V2.0 Servo 20mm 70g 20Kg
1 x GM Propellers Folding propeller Scale 20x13 Carbon 1 pair
1 x Pilot "Adolf" Legends Series (Slimline)
1 x Propeller POWER-PROP 7x7
1 x Pilot "Duke" Legends Series (Slimline)
1 x Ring support P-20 OPUS V-Jet 60mm
1 x Xplorer4 anemometro
1 x Civilian pilot "G-Man" size 9cm (Slimline)
1 x 1/12 Pilot "Cougar"
1 x 1/4 Pilot "Mike"
1 x Militarian pilot "Kamikaze" size 9cm (Slimline)
1 x Pilot JAN 1/4 Saiplanes
1 x Civilian pilot "Curt" size 9cm (Slimline)
1 x Servos security connector (2 pcs)
1 x Servo FUTABA S 3071 HV S-Bus
1 x Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x Extension silicon 75 cm (Futaba)
1 x Piloto Jet "Red" 1/6 Scale
1 x 1/6 Pilot "John"
1 x 1/7 Pilot "Japanese"
1 x 1/6 Pilot "Garry"
1 x Piloto jet 130 mm
1 x Propeller APC 14x8.5 Electric Pusher
1 x Carbon servo arms for HITEC HS 65 (4 pcs)
1 x Futaba S9650/9670SV - Upper Case
1 x Servo FUTABA S 9670 SV
1 x Servo FUTABA BLS 272SV
1 x MIG 29 3D RTF, Servo
1 x Servo DL3017 Digi 17Kg-0.15s/60º
1 x Servo arms set HS-60/81/85/5082MG/5085mg
1 x Servo FUTABA S 3072 HV S-Bus
1 x SE Ring 240 mm (2 pcs)
2 x Battery LiFe TopFuel 3100 mAh 2s MTAG 30C
2 x Battery LiFe TopFuel 3100 mAh 3s MTAG 30C
2 x Battery LiFe TopFuel 3100 mAh 4s MTAG 30C
1 x NoNa BB wheel Ø130x40mm in pair
1 x 50N turbine start protection tube
1 x Spinner propeller pleg. 32 mm / 6,0 mm
1 x Spinner propeller pleg. 30 mm / 3,0 mm
1 x SERVO S9177SV HV S-Bus2 Programable
1 x SE Ring 250 mm (2 pcs)
1 x SE Ring 360 mm (2 pcs)
1 x 20x1000 mm Ring Strap Back To Back
1 x Servo FUTABA BLS175 SV
1 x Tape GFK 38 mm
1 x Batetia LiFe 3200 mAh 6.6v MPX PowerBox
1 x GM Propellers Spinner Scale ø 45mm Diameter, Motor shaft ø 6mm C
1 x Spinner propeller pleg. 30 mm / 6,0 mm
1 x Spinner Alumin. propeller pleg. 40 mm / 4,0 mm
1 x Spinner propeller pleg. 30 mm / 4,0 mm
1 x Tank GFK Opus/JEt 300 ml
2 x OPUS-V / Jet-CC-BF
1 x 30 mm Alu spinner 3 mm pleg. propeller
6,783.02EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies