Top » Catalog » Hardware » BEC/Cables/Conectors/Interruptor » EMCA85080

16.00EUR

EWC3 40 cm wing connector
[EMCA85080]

EWC3 40 cm wing connector

The ingenious plug system for R/C modelling!
- reverse polarity protected
- high current qualified (up to 12A per contact)
- 100% safe connection because of locking
- small construction form due to 2,54 mm contact spacing
- easy mounting due to packaging
- strong high flexible cable with 0.34mm² (AWG22) cross section
- single connector version for up to two servos

The EWC (EMCOTEC wing connector) is a new plug system for R/C modelling. High value plugs "made in Germany" with a resistance of <20mOhm quarantee best contact safety. The crimp contacts are locked twice and reach best tensile force. The cable plug engages with the multipole connector on the PCB. So it's protected against accidental release for example due to vibrations.

The servo connection cable will be soldered directly to the PCB. Also 2 cables (one above one below) can be soldered, that results a kind of a v-cable. The servo cable can be fixed with a cable tie and a shrinking hose on the PCB if required. The complete PCB with the multipole connector can be fixed in the wing root of the model.

The counterpart (connector socket) is equipped with a strong 0.34mm² servo cable. The cable goes to the receiver or to the servo connector of a dual power supply.

Delivery includes EWC set consisting of EWC PCB with mounted plug, cable ties and shrinking hose, EWC connection cable (JR) 40cm (15.75in) with lockable counterpart connector socket.

temporarily out of stock

Reviews

Customers who bought this product also purchased

Spinner 159x200 mm GFK temporarily out of stock	DUPLEX 2.4EX MU 3 Sensor temporarily out of stock	Quick hose connector 4-4 mm temporarily out of stock
Cockpit aluminium closing temporarily out of stock	Conector JR/Uni Servo male BLUE silicon (10 pcs) temporarily out of stock	Blue aluminium servo arm V2-Hitec 1,0 inch M3 temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

DUPLEX case for Jeti DS handheld transmitter
54.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	USB HLS prog. interface
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
2 x	APM2.6 Power module with 5.3V DC BEC
1 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x	2 LiPo XH>EH adapter
1 x	JETImodel SINGLE BEC
1 x	30 cm BEC cable (male)
1 x	UBEC 6A KAVAN
1 x	CC 01
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	Black copper lacquer wire Ø0,2 mm (5 m)
1 x	Futaba External voltage input cable Futaba CA-RVIN-700
1 x	"Y" charging 4mm wire (2 IN-1 OUT).
1 x	4 LiPo XH>EH adapter
1 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x	TrainerCord (master-learner)
1 x	Red copper lacquer wire Ø0,2 mm (5 m)
1 x	TP/TopFuel - XH 2/3S Adapter
1 x	Dean "T" - Futaba Adapter
1 x	MPX-Dean "T" Adapter
1 x	30 cm BEC cable (female)
1 x	DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x	CC 02
2 x	Cabel charger transmitter GRAUPNER
1 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	BEC 3A FOXY
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll
1 x	Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m
1 x	Propeller FALCON 32,5x11 PUSHER Carbono
1 x	Carbon Non-Woven, 160 g/m² 100 cm 10 m
1 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M
1 x	Vacuum bag, 1200 mm x 50 m
1 x	Motor DLE 170 M- Paramotors
1 x	Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x	Carbon Non-Woven, 160 g/m² 100 cm 25 m
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m
1 x	Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x	Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
2 x	Motor DLE 200cc Premium Muffler
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x	Carbon fibre sleeve 12k 170 mm x 5m
1 x	Carbon Non-Woven, 160 g/m² 127 cm 5m
1 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x	ARAMID honeycomb 1300x2600x2 mm
1 x	Small Crow DLE-170M
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
2 x	Straightened rod Ø 2.0 mm x 1000 mm
1 x	Straightened rod Ø 5.5 mm x 1000 mm
1 x	Straightened rod Ø 5.0 mm x 1000 mm
2 x	Brass hexagonal rod Ø 4 mm x 1000 mm
2 x	Brass hexagonal rod Ø 3.5 mm x 1000 mm
2 x	Straightened rod Ø 4.0 mm x 1000 mm
2 x	Straightened rod Ø 3.0 mm x 1000 mm
2 x	Brass rod Ø 1.0 mm x 1000 mm
2 x	Straightened rod Ø 1.2 mm x 1500 mm
1 x	Straightened rod Ø 4.5 mm x 1000 mm
1 x	Para-RC Trike "RC-Bullix"
2 x	Wing OXY 0,5 pulgadas2
1 x	LUCAS pilot ARTF
1 x	Opale Rucksack
1 x	Paramotor BackPack XXS 2
1 x	Windsock Ozone L -1200 mm
1 x	Parachute BACKUP X100
1 x	Set cintas unión paracaídas 145 cm
1 x	Paramotor Trike XL
2 x	Parachute PV6 for F3J
1 x	MAX pilot ARTF
1 x	Aramid 50 daN 50 m
1 x	Windsock Ozone L - 700 mm
1 x	Connectors banna oro 4 mm (M/F) (ultralight)
1 x	Connector CAN 15
1 x	Partall paste 650 g
1 x	Profile ABS triangular 4.0x1000 mm 90º
1 x	CC 03
1 x	Blind nut M6 (4 pcs)
1 x	PVC grid straight 290x185x0.32 mm
2 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
2 x	Helices DJI Mavic Air 2 STEALTH "Black" (4x Ud)
1 x	1804 2400KV Brushless Motor Qav 250 mini
1 x	AXI 2204 Multicopter
1 x	Big Crow DLE-170M
2 x	Straightened threaded rod M3 - 1m
1 x	Straightened rod Ø 14.0 mm x 1000 mm
1 x	Straightened rod Ø 6.0 mm x 1000 mm
1 x	Brass rod Ø 1.5 mm x 1000 mm
1 x	Straightened threaded rod M2-1m
1 x	DPSI Micro SingleBat 5.9V/7.2V F3A Edition magnetic switch
1 x	Fuel Dot (RED)
1 x	Combo lighting module with covering drop shape
1 x	Fuel Dot (Black)
1 x	EWC6 40 cm wing connector
1 x	DPSI Micro - DualBat 5.9V / 7.2V JR-JR (Dual Power Supply)
1 x	DPSI Micro - DualBat 5.9/7.2 MPX-2xMPX dual
1 x	DPSI Micro - RCS
1 x	DPSI magnetic switch actuator (PCB)
2 x	Propeller diller for DLE170
1 x	Tacometer mini ignition RCEXL
1 x	DLA 116 crankshaft
1 x	Propadapter for motor A50
1 x	Heli digital angle measurer
1 x	Kwik link unmount tool
1 x	Mini Infrared Thermomiter
2 x	Propeller diller 5/6,3/8/9
1 x	Propeller diller for DLE30/DLE35RA/DLE40/DLE55/DLE61/EME 55/DA-5
1 x	Propeller diller for EME35 and DLE35
2 x	Hot Glue Stick RED
1 x	DPS Switch JR/JR
2 x	Propeller diller for DLE111 and DA85-150
1 x	DPSI Micro - RCS RV
1 x	EWC3 40 cm wing connector
1 x	Para-RC "RC-Evo-Cross" Rescue
1 x	Glass fibre sleeve Ø 20 mm X 10m
1 x	Carbon plate 350x150x5.0 mm
1 x	Peel ply 95 g/m² (plain weave) 100 mm x 100 m
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 50m
1 x	Carbon plate 350x150x3.0 mm
1 x	Carbon plate 350x150x0.5 mm
1 x	Universal batery Tester
1 x	Paramotor Kit Camo H1.5/ Ben Red
1 x	Parachute P4
1 x	Battery RX JETI LiIon RB 6200 7.2v
1 x	Helices DJI Mavic Air STEALTH "Black" (4x Ud)
1 x	Propeller mounting nuts Black / Silver Rocket 400 or Phatom simi
1 x	Landing gear Rocket 400
1 x	FA27.2×8.9 Prop-2PCS/PAIR
1 x	P 17×5.8 Prop-2PCS/PAIR
1 x	Charger Li Polymer Multi-Cell Multi-Rate Charger (MCMR)
1 x	Carbon fiber rod 0.5 mmx1000 mm
1 x	Optotronix Aurora Plug
1 x	LiIon Battery 3000 mAh 3.3v 15A (2 pcs)
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs)
1 x	Z Bender - S Type Tool
1 x	Digital scale up to 40 kg
1 x	Peel ply 100 g/m² (plain weave) 50 cm x 2m
1 x	Carbon fibre sandwich sheet 350x150x3 mm
1 x	Glass fibre sleeve Ø 20 mm
2 x	Aluminium sheet 500x250x0,5mm
1 x	Battery bed V2_S (black)
1 x	Beech dowels 3.0 x 1000 mm
1 x	Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm)
1 x	Carbon fiber rod 5.0 mmx1000 mm
1 x	DPSI Micro-DualBat 5.9V / 7.2V MPX-JR
1 x	DPSI Ampere battery backer
1 x	PWC4 wing/fuselage connector for 4 servos
1 x	EWC3 100 cm wing connector
1 x	OPTOTRONIX Aurora LCU
1 x	Mold plugs XT-30
1 x	3,0x60 mm allen screwdriver
1 x	Cut tube
1 x	Hot Glue Stick GREEN
1 x	Vacuum pump 12 CFM
1 x	Starter EM Gear Power 250
1 x	PROXXON - DRILL SET 0,5-3,2MM (10PCS.)
1 x	Screwdriver for Torx® TX6
1 x	Hexagonal ball head 2.0 x 50 mm
1 x	Heli blades angle measurer
1 x	1,5x50 mm allen screwdriver
1 x	Hot Glue Stick BLACK
1 x	Ball Link Plier
1 x	Goma arrancador Ø36 mm x 30 mm
1 x	Starter 12v (Max 180 and 30ccm)
1 x	Precision wrench L100 mm
1 x

19,964.98EUR