48.00EUR

8Wx2 Navigation & Strobe, 11mm, T-Fuse Red/White
[UNDUAL11F160RW]


8Wx2 Navigation & Strobe, 11mm, T-Fuse

Powerful position and flash light in a housing. The profile light of the 11mm series is slim outside and fits optically also onto smaller models. Due to efficient LED emitter, the light has an enormous luminous power despite the compact dimension and thus it's also suitable for bigger models. The innovative, internally positioned cooling surface enables astonishingly compact dimensions with a unique slim design.

In delivery state, the profiled polycarbonate cap is simply attached. It can be varnished separately. It's highly transparent and unbreakable. The assembly of the lamp is astonishingly easy: With a simple surface mount, all you need is a slit of 3x28mm. In this way, the luminaire can be also mounted on smaller wing tips or fuselage. If desired, you can recess the luminaire up to 4mm, thus achieving an even smaller construction. The cap must be glued after the final assembly.

The luminaire is ready to use for operation with 2S LiPo (ca. 8V). With 3S (12V), the enclosed resistor has to be used. Alternatively you can use a 4W-3S adaption cable. Please note that high-performance LEDs can get very hot, up to 70°C is quite normal. These lamps with heatsink cases are suitable for continuous operation if an air flow (during flight) is possible. If this is not the case, the duty cycle of 5-10 minutes should not be exceeded. Please check operation temperatures after installation.


Technical Data Electricity: 4Wx2 RED and 8Wx2 WHITE reference power, 4(12)V, 2x0.7A
Beam angle: >160°
Light intensity: ~200 Lumen RED
Light intensity: ~300 Lumen GREEN
Light intensity: ~400 Lumen WHITE
Dimension light cap: 11.5x42.5x10mm, up to 4mm lowerable without loss of beam angle
Total mass: 11.5x42.5x70mm
Weight: 13g (without cable)
Delivery: ready to use with 1m silicon cable and series resistor for 2S operation, resistor for 3S enclosed


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x XPower XC5030/14 LS
1 x Motor XPOWER F2919/10 F5J Light
1 x Motor A20-20 L EVO
1 x Streamline Stainless Steel Tubing 17.8x12.4x1000 mm
1 x U Profile ABS 2,0x4,0x1000 mm
1 x BALSA trip 5.0x5.0x1000 mm
1 x Conector BEC female (10 pcs)
1 x L-Connector 1.0 mm x 1000 mm
1 x Linden wood slat 3.0x3.0x1000 mm
1 x Mahogany wood slat 1.5x1.5x1000 mm
1 x Beech dowels 10 mm x 1000 mm
1 x ABS angle 2,0x2,0x1000 mm
1 x Connectors banna oro 2 mm (M/F)
1 x Connectors banna oro 6,0 mm (M/F)
1 x 30 cm DEANS female connector
1 x Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm)
1 x U Profile ABS 8,0x4,0x1000 mm
1 x ABS tube 7.0x6.0x1000 mm
1 x PIX Hawk with accesories
1 x Straightened rod Ø 8.0 mm x 1000 mm
1 x Streamline Stainless Steel Tubing 12.3x7.7x1000 mm
1 x Ferrita con funda
2 x Profile ABS half cane 2.5x1000 mm
1 x Gold antispark 4 mm plug
1 x XH male balance (2S) connector (2 pcs)
1 x Ferrita 17x10x6.5 mm
1 x Extractor piñones 2.3/3.2 mm
1 x Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm)
1 x Connectors banna oro 4 mm (M/F)
1 x Connectors banna oro 8,0 mm (Male) 5 pcs.
1 x ABS angle 10,0x10,0x1000 mm
1 x Trailing edge BALSA 35x8x1000 mm
1 x U Profile ABS 5,0x10,0x1000 mm
1 x Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x Banna gold connector 2,5 mm (M/F)
2 x XH female balance (5S) connector (2 pcs)
1 x BALSA trip 3.0x3.0x1000 mm
1 x CF tube set (Ø 38 mm y Ø 14 mm)
1 x EC5-Set female, simple quality, 2 x female pin, 1 x blue housing
1 x Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm)
1 x XH male balance (5S) connector (2 pcs)
1 x Liston HAYA 3 x 10 x 1000 mm
1 x Beech dowels 3.0 x 1000 mm
1 x Straightened rod Ø 7.0 mm x 1000 mm
1 x Brass rod Ø 1.5 mm x 1000 mm
1 x Profile ABS Square 2 x 1000 mm
1 x Straightened rod Ø 1.0 mm x 1000 mm
1 x Pilot "Adolf" Legends Series (Slimline)
1 x 1/6 Pilot "Garry"
1 x 1/6 Pilot "Tony"
1 x Monokote PLATINO metalizado (1.8x0.65m)
1 x MYLAR film A350 (1000x500 mm)
1 x Oratex Natural White 2m
1 x Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x Support Flush MPX Conector (6 pcs)
2 x 25 mm reinforced hinge
1 x Tape GFK 38 mm
1 x 1/7 Pilot "Japanese"
1 x Pin type hinge Al 3,0x50 mm (2 pcs)
1 x 20 g tin paste
1 x Propeller balancer
1 x Pasacables rectangular 40x15 mm (4 pcs)
1 x SE Ring 240 mm (2 pcs)
1 x Oracover Yellow CADMIO 10 m
1 x Civilian pilot "Joe" size 9cm (Slimline)
1 x 
1 x 20x1000 mm Ring Strap Back To Back
1 x Soporte filtro FESTO (4 pcs)
1 x Support XT60 conector (2 pcs)
1 x XPower XC4226/12 LS
1 x Motor Scorpion HKIII 4035-560 Kv
1 x Motor XPower F2915/12 XLight
1 x Motor 2212 (1000KV) Quadcopter F450
1 x Receiver bed (Blue)
1 x Ø 40 mm fiberglass motor-holder for electric motors
1 x Size "M" motor holder for class 400
1 x Connectors banna oro 4 mm (M/F) (ultralight)
1 x Wing connector 8pin with pin strip, plug & socket
1 x A50 Motor Mount Alu complete set
1 x Bearings for motor HACKER C50
1 x Connectors banna oro 2 mm (M/F) (ultralight)
1 x Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x Connectors banna oro 8,0 mm (M/F)
1 x A/C economy plywood 600x300x6+.0 mm
1 x Gold antispark 5,5 mm plug
1 x XH female balance (3S) connector (2 pcs)
1 x XH male balance (3S) connector (2 pcs)
1 x Connectors DEANS 4 pins (1 pair)
1 x Connectors banna oro 3,5 mm (M/F)
1 x Electric Landing Gear GS-200 BULL Mo1 2.6 (Elektron Retracts)
1 x ER40eVo set B (20 Kg)
1 x Carbon tube (L 1000 mm, Ø18 mm, Ø15 mm)
1 x 10-15mm Servo Arm HITEC
1 x A/C quality beech plywood 600x300x0.8 mm
1 x A/C quality beech plywood 1520x750x4.0 mm
1 x L-39 Albatros 138"/3.5m lenght ARF
1 x Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x Sanyo RX Battery Eneloop 6,0 V JR
1 x ABS tube 4.0x2.0x1000 mm
1 x ED Position Lights wireless (Set of 3)
1 x LED wire (white - 2pcs)
1 x Ply-Span 450x600/13g Orange
1 x 135 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x Gates hinge 30x16 mm (2 pcs)
1 x Ply-Span 450x600/13g Red
1 x 3,2x1000 mm 2:1 red termoretract tube
1 x Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x PARTALL® Hi-Temp Wax, 340 g
1 x A/C quality beech plywood 1520x750x3.0 mm
1 x GS-200 Electronic
1 x Nose leg 155 mm with wheels 70 mm
2 x Carbon fibre tube -TAPERED- 3k-PW (10 x 5 x 0.3) x 880 mm
1 x Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø7.1 m)
1 x Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x JEEMO Kit ARF Basic (2 color Carbon finish) XTRALIGHT
1 x Electric Landing Gear ASPIRE (Elektron Retracts)
1 x ER40 Front Leg (with wheel 80mm)
1 x Set stickers JEEMO "Andy"
1 x Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x Tube Pitot to PIXHAWK
1 x Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø6.1 m)
1 x E_brakes electronics
1 x ER-50eVo Set A [2x ER50 + RB-45]
1 x Actuator Electric 25 mm HIGH TORQUE
2 x ABS tube 3.0x1.0x1000 mm
1 x Profile ABS half cane 3x1000 mm
1 x ULTIMATUM 2.0 PRO "McLAren"
1 x ABS tube 6.0x4.0x1000 mm
1 x ABS angle 5,0x5,0x1000 mm
1 x BOEING 727 kit
1 x ABS angle 3,0x3,0x1000 mm
1 x ULTIMATUM 2.0 m orange/blue
1 x ABS tube 9.0x8.0x1000 mm
1 x ABS tube 5.0x4.0x1000 mm
1 x Streamline Stainless Steel Tubing 15.5x8.5x1000 mm
1 x Nylon hinge 20x20x0,3 (10 pcs)
1 x 2,4x1000 mm 2:1 green termoretract tube
1 x 4,8x1000 mm 2:1 blue termoretract tube
1 x 4,8x1000 mm 2:1 black termoretract tube
1 x LED blink wire flashing (red - 2pcs)
1 x 6,4x1000 mm 2:1 black termoretract tube
1 x Indoor hinge with servo arm integraded
1 x 12,7x1000 mm 2:1 green termoretract tube
1 x 1,6x1000 mm 2:1 red termoretract tube
1 x 3,2x1000 mm 2:1 black termoretract tube
1 x 6,4x1000 mm 2:1 blue termoretract tube
1 x Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x Ply-Span 450x600/13g Yellow
22,981.84EUR
Manufacturers
Manufacturer Info
UNILIHGT
UNILIHGT Homepage
Other products
Languages
Español English
Currencies