Top » Catalog » Motors & Turbines » Explosion » Gasoline » SAITO » AE710099

1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
    Oils/Smoke Liquids
    Gasoline->
      DA
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NGH motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      Spare DA
      Spare parts DLE
      Spare parts MVVS
      Spares Zenoah/ZG
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesories/Muflers
    Glow->
  Turbines->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Servo GO-1006MG (0.052s/60º, 3.0Kg)
52.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

2 x	Bungee HLG Premium
1 x	Slave-cable USB Easy Sim
1 x	EasyFLY Addon
1 x	6 mm red aluminium threaded horn with patella
1 x	20 mm carbon horn
1 x	Horn 6/27 with M3 Bearing
2 x	Horn 20x28,5 mm (2 pcs)
2 x	Horn micro type4 Ø 0,5 (2 pcs)
1 x	Horn DU-BRO 1/2 (2 pcs)
1 x	Adjustable brass horn threaded M3
1 x	Horn 6/20 with M3 Bearing
1 x	6 mm blue aluminium threaded horn with patella
1 x	Horn mando long (2 pcs)
1 x	Brass control horn M3 short for wire (2 pcs)
1 x	Brass control horn M4 short for wire (10pcs)
2 x	Duralumium F3A horn 30x10x23,5 mm (2 pcs)
1 x	Brass control horn M4 long for wire (4 pcs)
1 x	Horn for flap control (1 pcs)
1 x	Cable with accesories
2 x	Extra long horn 60x30
1 x	6 mm M3 variable horn
1 x	6 mm M3 variable inclined horn
2 x	Brass control horn M4 short for wire (4 pcs)
2 x	Horn 16,5x20 mm (2 pcs)
1 x	Brass control horn M2 short for wire (2 pcs)
2 x	Connector CAN 15
2 x	Black copper lacquer wire Ø0,2 mm (5 m)
3 x	Connector Sub-D 2+5 Male
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	DPSI Ampere battery backer
1 x	30 cm BEC cable (male)
1 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
2 x	DPS Switch JR/JR
1 x	Bec MR UBEC 5A (5v/6v/7v)
1 x	Dean "T" - Futaba Adapter
1 x	Copper lacquer wire Ø0,2 mm (5 m)
1 x	30 cm BEC cable (female)
1 x	Extension silicon 25 cm (Futaba)
1 x	Cable silicona female batt. receptor 30 cm (Futaba)
1 x	A/C quality beech plywood 600x300x1.5 mm
1 x	A/C quality beech plywood 600x300x8.0 mm
1 x	20 g tin paste
2 x	Control horn long w/ball
2 x	Horn F3A de Titanium 16 mm (2 units)
1 x	PowerBox SparkSwitch RS
2 x	Female connector for 16 pines AWG
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	FX three-position switched channel, long
1 x	SBEC Jeti
2 x	USB Interface Adapter
1 x	Indoor hinge with servo arm integraded
1 x	Horn 13,5x16 mm (2 pcs)
2 x	Rudder forward 80x28 "type Kato"
1 x	RH long aluminium horn (2pcs)
1 x	Small aluminium horn blue (2pcs)
1 x	Threaded coupler ALU M2,5 Ø 3 (2 uds)
2 x	Set Threaded coupler ALU M2,5 Ø 4 (2 uds)
2 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	Threaded coupler ALU M2,5 Ø 6 (2 uds)
2 x	Threaded coupler ALU Left M3 Ø 4 (2 uds)
1 x	Small adjustable aluminium control horn with bearing 2,8x15
1 x	Landing gear axle 4x21 4 mm (2 uds)
1 x	Micro control horn T2 Ø 1
1 x	Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 5 m
2 x	Long adjustable control horn with bearing
1 x	Brass control horn M2 large for wire (2pcs)
1 x	Small aluminium horn red (2pcs)
2 x	Horn DUBRO 1/2A
1 x	DUPLEX 2.4EX RC Power Switch 10
1 x	5 mm M2 variable inclined horn
1 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	Car Charger DC/DS-16
1 x	Servo slow down unit (0,7-14,7 sec )
1 x	Extension 5 lipos JST/C - JST
1 x	MPS Gas-Cap-Powerswitch
1 x	SWTU2 switch
1 x	Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
2 x	wing/fuselage connector for 16 pines AWG 20-24
1 x	Male Prolonger TP 4/5S
2 x	Male connector for 16 pines AWG
1 x	Switching module high voltage SXH
1 x	EWC3 100 cm wing connector
2 x	Male connector for 6 pines AWG
2 x	USB Interface REVOLECTRIX for CellPRO 10s
2 x	SPARK Switch 12v
2 x	Short Switch On/Off micro
2 x	Male connector JST SH 1.0mm with 10 cm wire
3 x	Female connector JST SH 1.0mm with 10 cm wire
1 x	82 mm 12 mm axi 30 g F3A CF drilled spinner 3BL
1 x	Spinner Alumin. fixed propeller 50 mm / 4,0 mm
1 x	Spinner INO 70 mm Chrome (Imitacion metal)
1 x	Spinner 82mm Black ventilado
1 x	Fully Threaded Steel Rod M2,5 (2 uds)
1 x	Aluminium wide washer M4 Red (4 pcs)
1 x	45 mm rods set for direction control
1 x	Long adjustable aluminium control horn 2,8x24
1 x	TA1200 Charger Compatible with Smart and Standard LiPo Batteries
1 x	Cargqador GensAce IMARS III Pro Smart Balance RC
1 x	Canopy Astra
1 x	Spring clamp for tube Ø29 mm ext 1pc
1 x	Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x	F3A carbon 80 mm spinner for Spark EVO
1 x	Spinner Alumin. fixed propeller 50 mm / 6,0 mm
1 x	57 mm white plastic spinner for fixed propeller / 4,0 mm axi
1 x	Spinner INO 63 mm Chrome (Imitacion metal)
1 x	102 mm INO spinner (carbon imitation)
1 x	Spinner INO 82 mm Chrome (Imitacion metal)
1 x	75 mm INO spinner (carbon imitation)
1 x	8Wx2 Navigation & Strobe, 11mm Green/White
1 x	Set luces Airliner 2.1m Wingspan Scale 1:14 Civil/Sport
1 x	LightBox SR
1 x	Actuador lineal HLS12-100210-7.4v
1 x	Motor mount M
2 x	LH long black aluminium horn L31xH30 (2pcs)
1 x	Aluminium cap bolt washer M3 red (8 pcs)
1 x	Aluminium wide washer M4 Gold (4 pcs)
1 x	Aluminium cap bolt washer M3 green (8 pcs)
1 x	6 mm aluminium horn with patella
2 x	Long adjustable control horn 3x34
1 x	Medium extra-strong control horn with bearing 2,8x24
1 x	Big-Malibu XL Roof box with surfboard rack GREY
1 x	Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x	PVC 0,14 qmm servos wire Hitec/Mpx (5 m)
1 x	Electric spoiler 440 mm (2 pcs)
1 x	13 mm wing servo holder
1 x	Canopy Sweet / Siesta
1 x	Threaded coupler ALU Left M2,5 Ø 3 (2 uds)
1 x	Threaded coupler ALU M3 Ø 6 (2 uds)
2 x	Breatex™ Non-woven absorber 150 g/m² Roll 100m
2 x	PWC4 wing/fuselage connector for 4 servos
2 x	Three-position switched channel, short
1 x	Cyanocrylate MD GA460 odourless 20g
1 x	Epoxy MID-CURE™ 15 min (130g)
1 x	Cyano INSTA - CURE+™ (56g)
1 x	Catalyst INSTA - SET™ (235g)
1 x	Thread locker IC-Loc™ green "wicking" 10 ml
1 x	Small aluminium horn gold (2pcs)
1 x	Horn with ball 55x40
1 x	3 LiPo XH>EH adapter
1 x	Threaded coupler ALU M3 Ø 5 (2 uds)
1 x
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x	Male connector for 20 pines AWG
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x	wing/fuselage connector for 12 pines AWG 20-24
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x	CA Glue fast 20g
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x	Double conector with JR adapter and 200 mm extension
1 x	Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x	Hacker X-Pro USB interface V2
1 x	Male connector for 10 pines AWG
1 x	Carbon fiber flat 1000x6.0x0.8 mm
1 x	CA Glue (medium) 20g
1 x	Buy Perforated film 100 cm / 50 m
1 x	Buy Perforated film 100 cm / 10 m
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x	Female connector for 6 pines AWG
1 x	Alignment dowels (2 parts, outer-Ø 8 mm) bag/ 100 pairs
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 5 m
1 x	SPARK Switch 5.9v
1 x	Cyanoacrylate MD GLUE plus 405, for extreme loads 20g
1 x	Thread locker IC-Loc™ blue "medium" 10 ml
1 x	Cyano INSTA - FLEX+™ (25g)
1 x	wing/fuselage connector for 6 pines AWG 20-24 (without pines)
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x	Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
1 x	Female connector for 12 pines AWG
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x	Buy Perforated film 100 cm / 20 m
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x	Female connector for 10 pines AWG
1 x	PWC6 PowerWingConnector for 6 servos with fuselage socket
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x	ARAMID honeycomb 1300x2600x2 mm
1 x	EWC3 40 cm wing connector
1 x	wing/fuselage connector for 3 pines AWG 20-24
1 x	Cabling for Fox MDM1 wings
1 x	Female connector for 20 pines AWG
1 x	Carbon fiber rod 1.5 mm x 2000 mm
1 x	Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m
1 x	EWC6 40 cm wing connector
1 x	Micro Switch button
1 x	Buy Perforated film 145 cm / 50 m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x	JETImodel Addcap 1640
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 20m

9,019.98EUR