Top » Catalog » Hardware » BEC/Cables/Conectors/Interruptor » EMCA85080

16.00EUR

EWC3 40 cm wing connector
[EMCA85080]

EWC3 40 cm wing connector

The ingenious plug system for R/C modelling!
- reverse polarity protected
- high current qualified (up to 12A per contact)
- 100% safe connection because of locking
- small construction form due to 2,54 mm contact spacing
- easy mounting due to packaging
- strong high flexible cable with 0.34mm² (AWG22) cross section
- single connector version for up to two servos

The EWC (EMCOTEC wing connector) is a new plug system for R/C modelling. High value plugs "made in Germany" with a resistance of <20mOhm quarantee best contact safety. The crimp contacts are locked twice and reach best tensile force. The cable plug engages with the multipole connector on the PCB. So it's protected against accidental release for example due to vibrations.

The servo connection cable will be soldered directly to the PCB. Also 2 cables (one above one below) can be soldered, that results a kind of a v-cable. The servo cable can be fixed with a cable tie and a shrinking hose on the PCB if required. The complete PCB with the multipole connector can be fixed in the wing root of the model.

The counterpart (connector socket) is equipped with a strong 0.34mm² servo cable. The cable goes to the receiver or to the servo connector of a dual power supply.

Delivery includes EWC set consisting of EWC PCB with mounted plug, cable ties and shrinking hose, EWC connection cable (JR) 40cm (15.75in) with lockable counterpart connector socket.

temporarily out of stock

Reviews

Customers who bought this product also purchased

DUPLEX 2.4EX MU 3 Sensor temporarily out of stock	Quick hose connector 4-4 mm temporarily out of stock	Spinner 159x200 mm GFK temporarily out of stock
Ball link M3 RPA's-UAV's temporarily out of stock	DUPLEX R18 EX 2,4GHz + Rsat2 temporarily out of stock	Servo Mount M (blue) temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

DUPLEX case for Jeti DS handheld transmitter
54.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Carbon Non-Woven, 160 g/m² 100 cm 10 m
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x	Carbon Non-Woven, 240 g/m² 100 cm x 20 m
1 x	Carbon fibre tape 200 g/m² (unidirectional) 50 mm
2 x	Carbon Non-Woven, 160 g/m² 127 cm 1 m
1 x	Demoulding wedge red (40 x 20 mm) 5 pcs
1 x	Carbon Non-crimp ST 200 g/m² 50 cm x 5 m
1 x	Carbon Non-Woven, 160 g/m² 127 cm 5m
1 x	Carbon Non-Woven, 240 g/m² 100 cm x 2m
1 x	ARAMID honeycomb 1300x2600x2 mm
1 x	Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m
1 x	Carbon Non-crimp ST 200 g/m² 50 cm x 20 m
1 x	Carbon fibre sleeve 12k 170 mm x 5m
1 x	Carbon Non-Woven, 160 g/m² 100 cm 5m
2 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x	67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
2 x	15 mm reinforced hinge
2 x	Nylon hinge 15x0,3 (10 pcs)
1 x	Pin type hinge Al 4,5x70 mm (2 pcs)
1 x	Pin type hinge Al 4,5x70 mm to wire (2 pcs)
1 x	Large flex hinge (12 uds)
1 x	Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x	Unmounted aluminium pin 6x98 mm (2 pcs)
1 x	Gates hinge 30x16 mm (2 pcs)
1 x	67 mm cylidric hinge Ø 5 mm (4 pcs)
2 x	Small pinned hinge (12 uds)
2 x	Long pinned hinge (12 uds)
1 x	Pin type hinge Al 6x98 mm (2 pcs)
2 x	Nylon hinge 20x20x0,3 (10 pcs)
2 x	76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
3 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x	67 mm cylidric hinge Ø 4,5 mm (5 pcs)
2 x	Fast'n EZ-CA-Hinge (12 uds)
1 x	Fast'n EZ-CA-Hinge, lite (12 uds)
2 x	Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x	Gates hinge
1 x	Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x	Micro flex hinge (12 uds)
1 x	Long pinned hinge (6 uds)
1 x	Flap hinge (6 pcs)
1 x	Gates hinge aluminium (1 pcs)
2 x	Shirt Hispano Aviación
1 x	Vest clothes Hispano Aviación
1 x	Fiberglass plate 1200x1000x0,2 mm
1 x	Peel ply 95 g/m² (plain weave) 20 mm x 100 m
1 x	Carbon plate 550x350x2.5 mm ECOTECH
1 x	ABS 500 x 400 x 0,5 mm (white)
1 x	Styrene plate 320x120x1.0 mm
1 x	Carbon plate 550x350x3.0 mm ECOTECH
1 x	Styrene plate 320x120x0.5 mm
1 x	Foam plastic plates (310x210x5 mm)
1 x	Carbon plate 550x350x4.0 mm ECOTECH
1 x	Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x	White smoke bombs AX-60 (5 pcs)
2 x	White smoke canister 100 g
1 x	Initior Receiver FRX2 Wireless
1 x	Yellow smoke canister 100 g
1 x	Smoke set "S"
1 x	White smoke bombs AX-3 (10 pcs)
1 x	"S" set for boats
1 x	Blue smoke canister 100 g
1 x	AX-60 starters (5 pcs)
1 x	Smoke set "Glider"
2 x	Electric rocket starters (6 pcs)
1 x	Parachutist
1 x	Yellow smoke canister 65 g
2 x	Ventral support for AX-18/AX-60
2 x	Yellow smoke canister 140 g
1 x	Initior Transmitter FTX2 Wireless
3 x	Remote electric ignition system
1 x	"S" set for planes
3 x	AX-60 starters (5 pcs)
1 x	PVC grid straight 290x185x0.32 mm
1 x	CM-3
1 x	TP/TopFuel - JST-EH 4/5S Adapter
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x	Strip 2,5x1,25x330 mm
1 x	ABS Strip 1.5x3.0x1000 mm
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
2 x	Flap hinge 33x9 mm (6 pcs)
1 x	Carbon Non-Woven, 240 g/m² 100 cm x 5m
1 x	Program 5v SIO RS 232
1 x	Crystal Universal RX 35.070 Ch 67
1 x	Crystal TX 35.050 Ch 65
2 x	Pin hinge 34x16 mm (10 uds)
1 x	Blade holder metal LAMA
1 x	Flybar support metal LAMA
1 x	Gates hinge black 30x16 mm (2 pcs)
1 x	ROBART POINT HINGE 4,7mm (5 pcs)
1 x
1 x	Nylon hinge 20x15x0,3 (10 pcs)
1 x	Cooler motor type 300
1 x	Cooler motor type 400
1 x	Radial heatsink for MPJ AC25/35-xx motor
1 x	Motor holder for AC 28/7
1 x	Small flex hinge (12 uds)
1 x	Green smoke canister 140 g
1 x	Glass fabric 425 g/m² aero,10x1m
1 x	Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 5 m
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x	PVC grid diagonal 290x185x0.32 mm
1 x	Glass fabric 390 g/m² (silane, twill) 100 cm x 20m
1 x	Glass fabric 390 g/m² aero,10x1m
1 x	Junta selladora, Tacky Tape Gris 2.75mmx12mmx15m
1 x	Peel ply 95 g/m² (plain weave) 100 mm x 100 m
1 x	Peel ply 64 g/m² (plain weave) 150 cm x 10m
1 x	33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x	Oracover Brown 2 m
1 x	Smoke set "M"
1 x	White smoke bombs AX-9 (10 pcs)
1 x	T-Motor U7-V2.0 Kv420
1 x	Red smoke canister 65 g
1 x	Black smoke bombs AX-60 (5 pcs)
1 x	White smoke bombs AX-18 (5 pcs)
1 x	BULL MØ1 2.600mm "McLAREN-GULF"
1 x	ULTIMATUM 2.0 m yellow/blue

15,087.25EUR