Top » Catalog » Motors & Turbines » Explosion » Gasoline » SAITO » AE710099

1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
    Oils/Smoke Liquids
    Gasoline->
      DA
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NGH motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      Spare DA
      Spare parts DLE
      Spare parts MVVS
      Spares Zenoah/ZG
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesories/Muflers
    Glow->
  Turbines->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Motor ER-120 M3-34mm eje
21.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Nylon hinge 15x0,3 (10 pcs)
1 x	67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x	Nylon hinge 20x20x0,3 (10 pcs)
1 x	Large flex hinge (12 uds)
1 x	67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x	67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Gates hinge aluminium (1 pcs)
1 x	Pin type hinge Al 4,5x70 mm to wire (2 pcs)
1 x	25 mm reinforced hinge
1 x	Long pinned hinge (12 uds)
1 x	Nylon hinge 20x15x0,3 (10 pcs)
1 x	Pin type hinge Al 6x98 mm (2 pcs)
1 x	Pin type hinge Al 4,5x70 mm demount (2 pcs)
1 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x	Gates hinge black 30x16 mm (2 pcs)
1 x	Pin type hinge Al 3,0x50 mm (2 pcs)
1 x	Micro flex hinge (12 uds)
1 x	Fast'n EZ-CA-Hinge (12 uds)
1 x	Long pinned hinge (6 uds)
1 x	Pin type hinge Al 4,5x70 mm (2 pcs)
2 x	Gates hinge 30x16 mm (2 pcs)
1 x	Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x	Flap hinge (6 pcs)
1 x	18 mm reinforced hinge
1 x	Indoor hinge with servo arm integraded
2 x	33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	15 mm reinforced hinge
1 x	Mahogany wood slat 1.5x1.5x1000 mm
1 x	Linden wood slat 3.0x3.0x1000 mm
2 x	Pine wood slat 3.0x7.0x1000 mm
2 x	BALSA triangular 8x8x1000 mm
2 x	BALSA triangular 10x10x1000 mm
1 x	Pine wood slat 10x10x1000 mm
1 x	Pine wood slat 5.0x5.0x1000 mm
1 x	Trailing edge BALSA 35x8x1000 mm
1 x	Beech dowels 10 mm x 1000 mm
1 x	BALSA trip 6.0x6.0x1000 mm
3 x	Linden wood slat 2.0x2.0x1000 mm
1 x	Liston HAYA 3 x 10 x 1000 mm
1 x	BALSA trip 3.0x3.0x1000 mm
2 x	BALSA trip 8.0x8.0x1000 mm
1 x	Pine wood slat 3.0x10.0x1000 mm
2 x	OBECHI sheet 2.0x3.0x1000 mm
1 x	BALSA trip 5.0x5.0x1000 mm
1 x	Pine wood slat 2.0x10.0x1000 mm
3 x	BALSA leading edge 8x10x1000 mm
2 x	Beech dowels 2.0 x 1000 mm
2 x	Liston HAYA 8 x 8 x 1000 mm
1 x	Mahogany wood slat 3.0x3.0x1000 mm
2 x	Walnut wood slat 2.0x2.0x1000 mm
1 x	BALSA trip 10x10x1000 mm
1 x	BALSA trip 2.0x10.0x1000 mm
2 x	Beech dowels 4.0 x 1000 mm
1 x	BALSA trip 4.0x4.0x1000 mm
1 x	Pine wood slat 3.0x5.0x1000 mm
2 x	BALSA triangular 15x15x1000 mm
2 x	BALSA trip 2.0x2.0x1000 mm
1 x	Walnut wood slat 3.0x3.0x1000 mm
4 x	Beech dowels 3.0 x 1000 mm
1 x	Parachute P4
1 x	Rescue 1,8m2 / BackPack
1 x	Parachute BACKUP X100
2 x	Paramotor Kit Camo H1.5/ Ben Red
1 x	Paramotor BackPack XXS 2
1 x	Para-RC Trike "RC-Bullix"
3 x	Wing OXY 5,0 m2
2 x	Parachute PV6 for F3J
1 x	Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
2 x	Fast'n EZ-CA-Hinge, lite (12 uds)
1 x	2,5x60 mm allen screwdriver
1 x	Pin hinge 34x16 mm (10 uds)
1 x	43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Pin hinge 26x11 mm (10 uds)
1 x	Blue silicone 0,5 qmm wire (50 m)
1 x	120x60 mm SLH KOVO wheel
1 x	100 Newtons FEMA absorber
1 x	Nylon hinge for flaps 33x9 (2 pcs)
1 x	Carbon plate 350x150x1.0 mm
1 x	BALSA triangular 6x6x1000 mm
1 x	Aluminun wheel collar 6 mm Ø (4 uds)
1 x	Sun Cover PC 21 XXL (JMB Jets)
1 x	Birch plywood plate 600x300x2.5 mm
2 x	A/C quality beech plywood 1520x750x3.0 mm
1 x	Plywood sheet BEECH 600 x 300 x 2,0 mm
1 x	Birch plywood plate 600x300x4.0 mm
2 x	Landing gear axle Ø 4 mm (2 uds)
2 x	Landing gear axle 4x21 4 mm (2 uds)
1 x	Balsa panel 1.0x100x1000 mm
1 x	Pine wood slat 6.0x6.0x1000 mm
1 x	Landing gear axle Ø 6 mm (2 uds)
1 x	Walnut wood slat 1.5x1.5x1000 mm
1 x	Prop Shaft Adapter 6 mm/M8 "long" 35 mm
1 x	TAKEO 3.6m electric
1 x	Gracia Maxi ARF, bags (Top Model)
1 x	Q-12 X-light 2000 mm Electric
1 x	SCHARNHORST accessories
1 x	2 mm Prop Adapter M6
1 x	Gracia Maxi ARF, spare wings (Top Model)
1 x	Aero-Master Cabine (Aero-naut)
1 x	BABY glider (Aero-naut)
1 x	Fournier RF-4D
1 x	X-RAY Micro QR (Fuselage with canopy)
1 x	Pine wood slat 2.0x2.0x1000 mm
1 x	TX-Tray V1 (L) (Red)
1 x	Transmitter Balancer HITEC Aurora 9, JR and Spectrum (blue)
1 x	Transmitter Balancer SPK DX-8
2 x	Futaba Radio Case
1 x	Wing OXY 0,5 pulgadas2
1 x	Paramotor BackPack XXS (without accessories)
1 x	Ballast 700gr OPALE
1 x	Switch Cap L (silver)
1 x	Set cintas unión paracaídas 145 cm
1 x	Antenna FUTABA 2.4GHz 3PM/8FG/14SG/18SZ/18M
1 x	Receiver bed (Blue)
1 x	MAX pilot ARTF
2 x	MULTIPLEX ALUMINUM CASE "M-LINK"
1 x	Futaba S-Bus Rx/Gyro Link Lead
1 x	Windsock Ozone L - 700 mm
1 x	Para-RC "RC-Evo-Cross" Rescue
2 x	Ciano KAVAN Medium 20g
1 x	110x55 mm SLH KOVO wheel
1 x	25 mm carbon servo arm
1 x	120x60 mm C SLH KOVO wheel
1 x	280 cc gasoline fuel tank complet
1 x	Propeller APC 11x5.5 Electric Pusher
1 x	Pine wood slat 1.5x3.0x1000 mm
1 x	Propeller 8x4,3 SlowFlyer
1 x	Propeller 3x2
1 x	Propeller APC 12x6 SF
1 x	Propeller APC 11x7 Electric
1 x	Propeller APC 13x4 Electric Pusher
2 x	Propeller APC 11x10 Electric
1 x	Propeller APC 13x8 Electric
1 x	Propeller APC 11x4.7 SF Pusher
1 x	Propeller APC 14x10 Electric
2 x	Propeller APC 11x4.5 Electric Pusher
1 x	Propeller APC 11x3.8 SF
1 x	Propeller APC 13x10 Electric
1 x	Propeller APC 10x5 Electric
1 x	Propeller APC 10x3,8 SF
1 x	Propeller APC 10x7 Electric
1 x	Propeller APC 11x4.7 SF
2 x	Propeller APC 11x8.5 Electric
1 x	Propeller APC 10x5 Electric Pusher
1 x	Propeller APC 13x6.5 Electric Pusher
1 x	Propeller APC 10x10 Electric
1 x	Propeller APC 11x5.5 Electric
1 x	Propeller APC 11x7 SF
1 x	Propeller APC 13x6.5 Electric
1 x	Propeller APC 10x4.7 SF Pusher
1 x	Propeller APC 12x10 Electric
1 x	Propeller APC 10x5.5 MR Electric multirrotor PUSHER
1 x	Propeller APC 10x4.7
1 x	Disposable Injector Bags (30x16cm) 100 pcs
1 x	Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x	Landing gear axle Ø 5 mm (2 uds)
1 x	Birch plywood plate 600x300x1.5 mm
1 x	A/C economy plywood 600x300x6+.0 mm
1 x	Birch plywood plate 600x300x1.2 mm
1 x	Spinner fold propeller 50 mm (white spare spinner)
1 x	Spinner propeller pleg. 30 mm / 2,3 mm
1 x	Spinner propeller pleg. 40 mm / 4 mm
1 x	Landing gear axle Ø 8 mm (2 uds)
1 x	BALSA trip 3.0x5.0x1000 mm
1 x	A/C quality beech plywood 600x300x8.0 mm
1 x	Balsa panel 2.0x100x1000 mm
1 x	Housing Ø 6 mm (20 pcs)
1 x	Spinner propeller pleg. 45 mm / 5 mm
1 x	Z Spinner (CN) 35mm
1 x	Z Spinner (CN) 40mm
1 x	Spinner propeller pleg. 40 mm / 3,17 mm
1 x	Spinner propeller pleg. 38 mm / 3,17 mm
1 x	Exhaust elbow for SAITO FA65/72/80/82a/91S/100/
1 x	Z Spinner (CN) 32mm
1 x	Spinner propeller pleg. 40 mm / 6 mm
1 x	Housing Ø 4 mm (2 pcs)
1 x	Spinner propeller pleg. 38 mm / 5 mm
1 x	Transom 40 mm
1 x	Glider STROLCH
1 x	TX-Tray V1 (L) (Black)
1 x	Switch Cap M (blue)
1 x	Microbalon filler for CA glues. Packaging bottle 20g
1 x	DELPHIN Race 3.6m c64
1 x	Avanti S 1.8m Jet FREECE TRICOLORI
1 x	FUSELAGE STAND MINI AVANTI EDF/JET
1 x	Avanti S Jet , Vectorial Exhaust for JetCat P-180
1 x	VIPER JET 2.2m + Electric landig Gear Deco: 01 Red-Blac-kWhit
1 x	Avanti XS Jet , Tank for Keroseno (SebArt)
1 x	Set stickers JEEMO "Andy"
1 x	Hopper UAT Sebar 600 ml
1 x	Avanti S, Cockpit sunCover (SebART)
1 x	CESSNA 50E White/Red
1 x	Transmitter Stick Ends V2 Red - M3 (2 pcs)
1 x	Emisora FUTABA T18 SZ + R7208SB
1 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	FUTABA F14 + R168DF + Servo S148
1 x	Transmitter Stick Ends V5 Blue - M4 JR/DX7
1 x	1000 ccm gasoline fuel tank
1 x	FUTABA 6L + R3106 2.4GHz
1 x	Transmitter Stick Ends V3 Red - M3 (2 pcs)
1 x	Futaba Aero Large Case - Internal Foam
1 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Futaba S3010 Servo - Standard BB 0.16s/6.5kg
1 x	VBar Control Touch, midnight black
1 x	LOGO 600 SX (kit)
1 x	Logo 400 SE VBar
1 x	Tail boom brace LOGO 480
1 x	Trike XL motor set (motor+esc+prop)
1 x	Servo HITEC HS-311
1 x	Servo HITEC HS-5245 MG Digi
1 x	Switch moment button, 2 functions, long FUTABA
1 x	Servo HITEC HS-5085 MG Digi
1 x	Maleta transporte FUTABA 10PX
1 x	Switch Cap L (black)
1 x	HPP-21 PLUS PC Programmer for Hitec Digital Servos
1 x	HPP-21 PLUS PC and Field Programmer for Hitec Digital Servos
1 x	Futaba S-Bus Rx/Gyro Link Lead
1 x	M3 INDUSTRIAL ball link (2 uds)
1 x	Pin hinge 39x20 mm (10 uds)
1 x	Swashplate metal LAMA
1 x	Engine mounts for .09 - .19 engine
1 x	Ciano KAVAN Super Thin 20g
1 x	Extension 30 cm (Futaba)
1 x	Threaded coupler M2 (10 pcs)
1 x	SlowFlyer control horn (3 pcs)
1 x	2 mm male connector (2 pcs) with safety connector
1 x	2 LiPo XH>EH adapter
1 x	1,2x1000 mm 2:1 red termoretract tube
1 x	4,8x1000 mm 2:1 blue termoretract tube
1 x	Propeller 11x4,7 SlowFlyer
1 x	Carbon plate 350x150x3.0 mm
1 x	Propeller APC 22x10 Electric
1 x	Propeller APC 10x5.5 MR Electric multirrotor
1 x	4,8x1000 mm 2:1 red termoretract tube
1 x	2,4x1000 mm 2:1 green termoretract tube
1 x	6,4x1000 mm 2:1 green termoretract tube
1 x	Propeller APC 11x8 Electric
1 x	1,2x1000 mm 2:1 black termoretract tube
1 x	0,14 mm PVC servo wire extension, ZH micro conector.

22,174.45EUR