Top » Catalog » Motors & Turbines » Explosion » Gasoline » SAITO » AE710099

1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
    Oils/Smoke Liquids
    Gasoline->
      DA
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NGH motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      Spare DA
      Spare parts DLE
      Spare parts MVVS
      Spares Zenoah/ZG
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesories/Muflers
    Glow->
  Turbines->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Motor ER-120 M3-34mm eje
21.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	3,9 mm ZG20-ZG38 servo arm
1 x	Small pinned hinge (12 uds)
1 x	Micro flex hinge (12 uds)
1 x	Gates hinge aluminium (1 pcs)
1 x	Long pinned hinge (6 uds)
1 x	Fast'n EZ-CA-Hinge (12 uds)
1 x	Nylon hinge for flaps 33x9 (2 pcs)
2 x	48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x	Flap hinge 33x9 mm (6 pcs)
1 x	33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
2 x	Gates hinge 30x16 mm (2 pcs)
1 x	67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Pin type hinge Al 4,5x70 mm demount (2 pcs)
2 x	Gates hinge
1 x	Nylon hinge 15x0,3 (10 pcs)
2 x	Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x	Fast'n EZ-CA-Hinge, lite (12 uds)
1 x	Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
2 x	Nylon hinge 20x20x0,3 (10 pcs)
1 x	76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
2 x	Brass rod Ø 0.5 mm x 1000 mm
1 x	Straightened rod Ø 7.0 mm x 1000 mm
1 x	Extractor piñones 2.3/3.2 mm
1 x	Straightened threaded rod M2-1m
2 x	Shirt Hispano Aviación
1 x	HV6150 Digital Servo
1 x	Stainless steel cable Ø 0.5 mm (2 m)
1 x	Cockpit plastic closing
1 x	Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x	Locking cable tie 2.5x100 (uds)
2 x	Servo MKS HBL550
1 x	Servo MKS HV 777A+
1 x	Servo MKS 6100 DS
2 x	Locking cable tie 4.6x203 (uds)
1 x	Screw-lock connector Ø 2 mm (2 uds)
1 x	Servo MKS HV747
1 x	Brazo servo MKS X8 Metal L:1.25/1.5 inc
1 x	Electric spoiler 250 mm (2 pcs)
1 x	Cierre cabina aluminio Ø4, I=10 mm
1 x	Servo MKS 6100 DS
1 x	Aluminium alloy coupler for carbon tube 6/M4
2 x	L cockpit anchor "tipe F3A" (2 pcs)
2 x	Covered closure or fairings
2 x	Servo MKS HBL599 SL
1 x	Stainless steel cable Ø 0.5 mm (20 m)
2 x	Crimping sleeves for cable 0.85 mm (10 pcs)
1 x	Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
1 x	Steering arm 12 mm Ø 3 mm (2 uds)
1 x	Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
2 x	Servo Metal Horn 15.5 mm MKS
1 x	Cierre cabina aluminio Ø5, I=16 mm
2 x	Locking cable tie 3.2x142 (uds)
1 x	Cap closure 33/23.5mm (2 uds)
2 x	Crimping sleeves for cable 0.70 mm (10 pcs)
1 x	Servo MKS HBL380
1 x	Servo MKS HV6120H
1 x	Steering arm 16 mm Ø 3 mm
1 x	Stainless steel cable Ø 0.62 mm (10 m)
1 x	Cabin latch Fox MDM1 4m (pair)
2 x	Servo DITEX EL0510M
1 x	Servo DITEX TD2612S
1 x	Servo SAVOX SV-0236 MG HV
1 x	Simulador RealFlight RF-9.5 S (sin emisora)
1 x	Z type of cable coupler Ø 2 (2 uds)
1 x	Windsock Ozone L - 700 mm
1 x	Parachute P4
1 x	Trike XL motor set (motor+esc+prop)
1 x	Aluminium wide washer M4 Red (4 pcs)
1 x	Cable with accesories
2 x	Straightened rod Ø 14.0 mm x 1000 mm
1 x	ABS 500 x 400 x 2,0 mm (white)
1 x	ABS Strip 1.0x3.0x1000 mm
1 x	Pilot "Anthony" (Slimline)
1 x	M3 INDUSTRIAL ball link (2 uds)
1 x	Gates hinge black 30x16 mm (2 pcs)
1 x	Pin type hinge Al 3,0x50 mm (2 pcs)
1 x	Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x	Pin hinge 39x20 mm (10 uds)
1 x	Pin hinge 34x16 mm (10 uds)
1 x	Long pinned hinge (12 uds)
1 x	67 mm cylidric hinge Ø 4,5 mm (5 pcs)
2 x	Support FUEL DOT V3
1 x	Motor A2212/13T
2 x	Support Pitot JETI
2 x	Soporte grifo FESTO (2 pcs)
1 x	Wheel collar 3 mm Ø (4 uds)
2 x	Steering arm 16 mm Ø 4 mm
1 x	18 mm reinforced hinge
2 x	Tube support Ø 6mm (10 pcs)
1 x	Nylon hinge 20x15x0,3 (10 pcs)
1 x	Straightened rod Ø 2.5 mm x 1000 mm
2 x	Straightened rod Ø 5.0 mm x 1000 mm
1 x	Straightened rod Ø 1.0 mm x 1000 mm
1 x	48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x	Straightened rod Ø 1.5 mm x 1000 mm
1 x	Brass rod Ø 0.8 mm x 1000 mm
1 x	Brass hexagonal rod Ø 5 mm x 1000 mm
1 x	Kobuz 5000 mm (Airwold)
1 x	ASW 15 5000 mm (Airwold)
1 x	Fox MDM 1 4000 mm DeLuxe
1 x	BLANIK 50 V2 Silver/Blue (SebArt)
2 x	LO 100 ARC 3.3m,cabina
1 x	BLANIK 50 V2 Silver/Blue (SebArt), cabina
1 x	Surprise XII Rudder (Freudenthaler)
1 x	LIBELLE Standard 3.8m D-box H-201
1 x	DG-303 ACRO 3750 mm, winglets
1 x	LO 100 ARC 3.3m,frame canopy
2 x	DG-303 ACRO 3750 mm, canopy
1 x	Fox MDM 1 4000 mm DeLuxe,Fox 1:4 set of instruments for the f
1 x	45 mm rods + T patellas set for direction control
1 x	Tip wing protector 40x14 (2 pcs)
1 x	Control for forward wheel (MINI)
1 x	Fully Threaded Steel Rod Duralumin 34 mm M3 (2 pcs)
1 x	STEERING FRONT WHEEL SYSTEM BIDULE 55
1 x	Wing bolts M3 Steel screw blue (2 pcs)
1 x	67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x	Brazo servo aluminio 1.25/1.5" Futaba/MKS/Savox
1 x	Ball Link ALU M3 - RH (1 pcs)
1 x	Bags BULL Mo1 2.6m "Luxe"
1 x	L-39 Albatros Scale 1:4.75 1991 mm
1 x	Bags wings/rudder ODYSSEY
1 x	Bags wings/rudder ASPIRE
1 x	Support conector MPX (6 pcs)
1 x	Support pump Xicoy X45
1 x	Aro pasacable Ø25 mm (4 pcs)
1 x	BULL MØ1 2.600mm "RED BULL"
1 x	BULL MØ1 2.600mm RED
1 x	10-15mm Servo Arm
1 x	ER-50eVo Set A [2x ER50 + RB-45]
1 x	Digital weight, angle and balance meter BASIC
1 x	BULL MØ1 2.600mm "McLAREN-GULF"
1 x	Pipa BULL MØ1 2.600mm
1 x	VIPER 1.7 Electric break wheels + structure
1 x	Fuselage BULL MØ1 2.600mm
1 x	HAWKER HUNTER 1:5,8 Desert (1.770mm)
1 x	Bags de Luxe ODYSSEY
1 x	ASPIRE Red ARF 2.000 mm, Canopy
1 x	ASPIRE Red ARF 2.000 mm, Set Elevators
1 x	Electric Landing Gear GALEB G4
1 x	F4E Phantom Scale 1:7
1 x	Electric Landing Gear ASPIRE
1 x	ASPIRE Red ARF 2.000 mm, Front Fuselage
1 x	Straightened threaded rod M3 - 1m
1 x	Switch Spring-Loaded 2-Position DC Tx DUPLEX 2,4EX
1 x	Harness for transmitter JETI DUPLEX
1 x	White silicone 0,25 qmm wire (150 m)
1 x	PVC 0,35 qmm servos wire Graupner (100 m)
1 x	White silicone 0,25 mm² wire (25 m)
1 x	Cabel "Y" 30 cm (Futaba)
1 x	Silicone 0,25 qmm servos wire Graupner (5 m)
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	5 LiPo XH>EH adapter
1 x	DISCUS 2A De Luxe 3.750 mm (Topmodel)
1 x	LO 100 Scale 1:2 - Modellbau Bruckmann
1 x	Fox 4000 mm Airworld,cabina
1 x	Split M1,2x10 (10 pcs)
1 x	Split pin 1x8 mm (10 uds)
1 x	Pushrod octagone 3/2
1 x	Starter EM Gear Power 80
1 x	Fully Threaded Steel Rod Duralumin 100 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod Duralumin 40 mm M3 (2 pcs)
1 x	HAWKER HUNTER 1:5,8, Electric retract landing gear
1 x	Recessed MPX connector support (6 pcs)
1 x	Support pumb/filter Xicoy X45
1 x	Support ECU Xicoy X-45
1 x	Support XT60 conector (2 pcs)
1 x	Aro pasacable Ø20 mm (4 pcs)
1 x	Soporte grifo FESTO vertical (1 pcs)
1 x	Support Filtro FESTO
1 x	Pasacables rectangular 40x15 mm (4 pcs)
1 x	Angle support XT60 conector
1 x	Tapa estado carga XT-60 (6 pcs)
1 x	Soporte filtro FESTO (4 pcs)
1 x	Neck strap JETI DC
1 x	Car Charger DC/DS-16
1 x	DUPLEX 2,4EX Switch SAFETY 2-Position Safety DC-16/14
1 x	M3-M4 rubber washer (8 pcs)
1 x	Red copper lacquer wire Ø0,2 mm (5 m)
1 x	PVC 0,08 qmm Futaba servos wire (5 m)
1 x	Silicone 0,14 qmm servos wire Graupner (100 m)
1 x	PVC 0,08 qmm Graupner servos wire (5 m)
1 x	Silicone red 0,25 mm² wire (25 m)
1 x	PVC 0,25 qmm servos wire Graupner (5 m)
1 x	Silicone 0,50 qmm servos wire Futaba (100 m)
1 x	3 LiPo XH>EH adapter
1 x	2 LiPo XH>EH adapter
1 x	White silicone 0,25 qmm wire (100 m)
1 x	Black copper lacquer wire Ø0,2 mm (5 m)
1 x	Cabel "Y" 30 cm (graupner)
1 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x	PT 22x10 EL Propeller
1 x	Swift S1 De-luxe 3.730 mm
1 x	Fox MDM 1 4000 mm Std.
1 x	LO 100 ARC 3.3m
1 x	FOX MDM-1 3.500 mm ARF White
1 x	Ventus 2cx 4.5 m Cabling wings
1 x	Fully Threaded Steel Rod SUS303 65 mm M3 (2 pcs)
1 x	Landing gear frontal support 29x26x13,5
1 x	Stick with Button DC/DS-16/14/24 Tx DUPLEX 2,4EX
1 x	Switch for DC: Long 3 Position
1 x	Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs)
1 x	Brazo servo MKS Metal M3-L:30 (2 pcs)
1 x	Fully Threaded Steel Rod Duralumin 80 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod alumin 40 mm M2,5 (2 pcs)
1 x	Cockpit aluminium closing 4.7g
1 x	Fully Threaded Steel Rod alumin 60 mm M2,5 (2 pcs)

48,561.32EUR