1 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
2 x | Horn 13,5x16 mm (2 pcs) |
1 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
1 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
1 x | Horn 16,5x20 mm (2 pcs) |
1 x | RH long aluminium horn (2pcs) |
2 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
2 x | Cable control set |
3 x | Small aluminium horn gold (2pcs) |
1 x | 6 mm aluminium horn with patella |
2 x | Horn 6/35 with M3 Bearing |
2 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
2 x | Small aluminium horn red (2pcs) |
1 x | Small aluminium horn blue (2pcs) |
1 x | Horn 6/27 with M3 Bearing |
1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
2 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
2 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
1 x | Cable with accesories |
1 x | Brass control horn M3 short for wire (2 pcs) |
1 x | 6 mm red aluminium threaded horn with patella |
2 x | Horn for flap control (1 pcs) |
1 x | Horn 20x28,5 mm (2 pcs) |
2 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
2 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
3 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
2 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
2 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
1 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
1 x | Ball link duraluminium M3 V1 (10 pcs) |
1 x | Softshell Hispano Aviación |
1 x | Screw-lock connector Ø 2 mm (2 uds) |
1 x | PVC 0,14 qmm servos wire Graupner (100 m) |
1 x | SUS wire 3m (nylon coated) |
1 x | Canopy Latch |
1 x | L cockpit anchor "tipe F3A" (2 pcs) |
1 x | Hexagonal ball head 2.0 x 50 mm |
1 x | Connectors banna oro 8,0 mm 5 pcs(Female) |
1 x | Connectors banna oro 3 mm (M/F) |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | Aluminium cap bolt washer M3 blue (8 pcs) |
1 x | Straightened rod Ø 7.0 mm x 1000 mm |
1 x | USB Mini Camera endoscope |
2 x | Horn mando long (2 pcs) |
2 x | Horn micro type4 Ø 0,5 (2 pcs) |
2 x | Brass control horn M2 long for wire (10pcs) |
3 x | Extra long horn 60x30 |
2 x | 6 mm M3 variable horn |
3 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 5 mm |
1 x | Micro control horn T2 Ø 1 |
3 x | Set Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Duralumium F3A horn 30x10x23,5 mm (2 pcs) |
1 x | 5 mm M2 variable inclined horn |
1 x | Adjustable brass horn threaded M3 |
3 x | Long horn 50x26 |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm |
3 x | Horn DU-BRO 1/2 (2 pcs) |
2 x | Horn DUBRO 1/2A |
1 x | Long extra-strong control horn with bearing 2,8x34 |
2 x | Micro control horn (2 pcs) |
1 x | Medium extra-strong control horn with bearing 2,8x24 |
1 x | LH long aluminium horn L31xH30 (2pcs) |
2 x | 6 mm M3 variable inclined horn |
1 x | Brass control horn M2 large for wire (2pcs) |
1 x | Horn with ball 55x40 |
1 x | Small adjustable aluminium control horn with bearing 2,8x15 |
1 x | 5 mm M2 variable horn |
2 x | Horn 5/20 with M2 Bearing |
3 x | Horn mando small (2 pcs) |
1 x | Fox MDM 1 4000 mm DeLuxe,Fox 1:4 set of instruments for the f |
1 x | BLANIK 50 V2 Silver/Blue (SebArt), cabina |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
1 x | ASH 31 Mi Scale:1/3 - 7m, elevator |
3 x | Teflon rollers 40 mm x 15 mm Diam. |
2 x | Carbon plate 550x350x1.5 mm ECOTECH |
1 x | Carbon plate 500x400x2.0 mm ISOTECH |
1 x | FOX MDM-1 3.500 mm ARF White |
1 x | LO 100 ARC 3.3m,frame canopy |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
1 x | Foam plastic plates (310x210x2 mm) |
1 x | Fox MDM-1 ARF 3.5m Orange |
1 x | Sandwich carbon + poplar 2mm + carbon 480x290 mm |
1 x | Ventus 1:4 set of instruments |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
1 x | GP 15 JETA |
2 x | Styrene plate 320x120x0.5 mm |
2 x | Fiberglass plate 350x150x2.0 mm |
1 x | Carbon plate 550x350x4.0 mm ECOTECH |
1 x | Sandwich carbon + poplar 4mm + carbon 480x290 mm |
1 x | ABS 500 x 400 x 1,5 mm (white) |
1 x | ABS 500 x 400 x 2,0 mm (white) |
1 x | DG-303 ACRO 3750 mm, winglets |
1 x | Fox MDM 1 4000 mm DeLuxe |
2 x | Fox 4000 mm with flaps (Airwold) |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
1 x | Foam plastic plates (310x210x8 mm) |
1 x | Fiberglass plate 350x150x0.5 mm |
1 x | Fournier RF-4D |
1 x | PET film Mylar® A 350, 50 cm, roll/ 2 m |
1 x | Carbon plate 350x150x1.5 mm |
1 x | Fiberglass plate 350x150x0.3 mm |
2 x | Foam plastic plates (310x210x3 mm) |
1 x | Electric spoiler 250 mm (2 pcs) |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 5 m |
1 x | Small control horn with bearing (2 pcs) |
2 x | Rudder forward 90x28 "type Kato" |
1 x | PBS TJ 40-G2 Turbine |
1 x | Long adjustable control horn with bearing |
1 x | LH long black aluminium horn L31xH30 (2pcs) |
1 x | Combustible Glow "KAVAN" air/heli 15% nitro |
1 x | Long adjustable aluminium control horn with bearing 2,8x15 |
1 x | Extra-long adjustable aluminium control horn 2,8x34 |
1 x | Horn with ball 40x30 |
1 x | Brass control horn M4 short for wire (4 pcs) |
2 x | SlowFlyer control horn (3 pcs) |
1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
1 x | Control horn long w/ball |
1 x | PC-6 Pilatus Porter Big "Tiger" (PICHLER) |
2 x | Sandwich Carbon fibre Rohacell (800 x 280 x 3 mm) |
1 x | FEMA DEFLECTOR LEVER FOR WHEEL BRAKE, |
1 x | Avanti S 2.3m Jet WHITE/BLUE (SebArt) |
1 x | Fascination 3600 mm (Top Model) |
1 x | Aero-Master Cabine (Aero-naut) |
1 x | LO 100 ARC 3.3m |
1 x | Avanti S 2.3m Jet YELLOW/BLACK & retract (SebArt) |
1 x | Gobe R-26S (Airwold) |
1 x | Avanti XS Jet , Fuselage Stand (SebArt) |
2 x | Teflon rollers 80 mm x 15 mm Diam. |
1 x | PVC plate 320 x 194 x 0.23 mm (brown) |
1 x | Sandwich carbon + poplar 2mm + carbon 290x160 mm |
1 x | Carbon plate 350x150x1.0 mm |
1 x | Colormatic 2K Soft fine putty white, 1 kg |
1 x | Sandwich carbon + poplar 3mm + carbon 290x160 mm |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 m |
1 x | BETA 1400 RTF Red |
1 x | Rudder forward 70x28 "type Kato" |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 5 mm |
1 x | Birch plywood plate 600x300x2.5 mm |
1 x | Cable coupler M2 (10 uds) |
1 x | Blade holder metal LAMA |
1 x | Adaptadores carga 6s JST-XH |
1 x | Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 5 m |
1 x | Thermoforming sheet 0.5mm (0.02in) DIN A4 |
1 x | Glass fibre braided sleeve (45mm) roll 20m |
1 x | Peel ply 95 g/m² (plain weave) 100 mm x 100 m |
2 x | Thermoforming sheet 0.1mm (0.004in) DIN A5 (5 pcs) |
1 x | Charger Li Polymer Multi-Cell Multi-Rate Charger (MCMR) |
1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
1 x | Axle wheel with accesories |
1 x | Retract undercarriage for gliders 12-25 Kg 2-2.8 (without wheel) |
1 x | 8Wx2 Gears-Spotlight, UltraPower, 20mm White |
1 x | 3x8W Triple-Spotlight, 12mm, T-Fuse White |
1 x | 4Wx2 Power Navigation Light, 13mm, T-Fuse White |
1 x | 8Wx2 Navigation & Strobe, 11mm Green/White |
1 x | 8Wx2 Navigation & Strobe, 11mm, T-Fuse Red/White |
1 x | Regulador Jeti Jes 045 |
1 x | 16mm Gear-Spotlight, 4W |
1 x | Lense for Spotlights, 20mm |
1 x | 8Wx2 Navigation & Strobe, 11mm Red/White |
1 x | Ventus 2cx 4.5 m Winglets |
1 x | Field folding model stand SebArt |
1 x | Challenger ARF (Top Model) |
1 x | Ventus 2cx 4.5 m Sapare Fuselaje |
1 x | Avanti S 2.3m Jet WHITE/BLUE & retract (SebArt) |
1 x | LUNAK 4,00 m |
1 x | ASH 31 Mi Scale:1/3 - 7m |
1 x | Bearings for motor HACKER C50 |
1 x | Avanti S 2.3m Jet YELLOW/BLACK (SebArt) |
1 x | Bidule 55 V3 2460 mm |
1 x | TURBINATOR 2 RED/WHITE 1778 mm Combo |
1 x | RANGER Jet Red/Yellow 1.854mm combo |
1 x | FOX ARF 2000 mm Red (Hacker Model) |
1 x | Styrene plate 320x120x1.0 mm |
1 x | Fiberglass plate 350x150x2.5 mm |
1 x | Fiberglass plate 350x150x3.0 mm |
2 x | Fiberglass plate 620x540x1,0 mm |
1 x | Sandwich carbon + poplar 4mm + carbon 290x160 mm |
1 x | Fiberglass plate 620x540x0,2 mm |
1 x | Fiberglass plate 620x540x0,3 mm |
1 x | USB Charger 120-240V AC |
1 x | POWER PEAK D7 EQ-BID 12V/230V-Duo Charger |
1 x | Baseplate servo |
|
63,981.75EUR |