1 x | GPS, Vario and altitude Sensor SBS-01G |
4 x | BALSA trip 3.0x3.0x1000 mm |
2 x | Liston HAYA 3 x 10 x 1000 mm |
3 x | Pine wood slat 2.0x2.0x1000 mm |
2 x | BALSA trip 8.0x8.0x1000 mm |
3 x | Pine wood slat 5.0x5.0x1000 mm |
2 x | BALSA triangular 15x15x1000 mm |
2 x | Beech dowels 2.0 x 1000 mm |
2 x | Liston HAYA 10 x 10 x 1000 mm |
2 x | BALSA trip 3.0x5.0x1000 mm |
2 x | Mahogany wood slat 2.0x2.0x1000 mm |
2 x | Walnut wood slat 3.0x3.0x1000 mm |
1 x | Pine wood slat 6.0x6.0x1000 mm |
2 x | BALSA trip 5.0x5.0x1000 mm |
1 x | BALSA trip 4.0x4.0x1000 mm |
1 x | Mahogany wood slat 1.5x1.5x1000 mm |
2 x | Pine wood slat 3.0x10.0x1000 mm |
2 x | Pine wood slat 3.0x5.0x1000 mm |
1 x | Silicone red 0,25 mm² wire (25 m) |
2 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
1 x | Parachute P4 |
1 x | Aluminium cap bolt washer M4 green (8 pcs) |
1 x | 12V Car Adapter |
4 x | NF-3 RC set |
1 x | LED wire (rojo - 2pcs) |
2 x | Jet Afterburner Simulator NF-Jet4 RY |
1 x | Wheel collar 5 mm Ø (4 uds) |
2 x | Aluminun wheel collar 2 mm Ø (4 uds) |
1 x | Light System |
1 x | Set stickers JEEMO "Andy" |
1 x | JEEMO Kit ARF Basic (2 color) - XTRALIGHT |
1 x | Jeemo Dolly |
2 x | DINO Glider ARC |
1 x | Glidder Mü13e (Bergfalke) |
1 x | Propeller POWER-PROP 7x7 |
1 x | X-RAY Micro QR (Fuselage with canopy) |
1 x | Linden wood slat 2.0x2.0x1000 mm |
1 x | 5 mm Prop Adapter M8 |
2 x | Pine wood slat 2.0x10.0x1000 mm |
2 x | Mahogany wood slat 3.0x3.0x1000 mm |
2 x | BALSA trip 6.0x6.0x1000 mm |
1 x | Pine wood slat 3.0x7.0x1000 mm |
2 x | Beech dowels 4.0 x 1000 mm |
1 x | Balsa panel 2.5x100x1000 mm |
2 x | Balsa panel 5.0x100x1000 mm |
1 x | BALSA trip 10x10x1000 mm |
1 x | Balsa panel 6.0x100x1000 mm |
3 x | Beech dowels 3.0 x 1000 mm |
2 x | BALSA leading edge 8x10x1000 mm |
1 x | A/C quality beech plywood 600x300x1.5 mm |
2 x | Pine wood slat 1.5x3.0x1000 mm |
1 x | BALSA triangular 6x6x1000 mm |
1 x | Liston HAYA 8 x 8 x 1000 mm |
1 x | Balsa panel 3.0x100x1000 mm |
1 x | A/C quality beech plywood 1520x750x4.0 mm |
1 x | BALSA triangular 8x8x1000 mm |
2 x | BALSA trip 2.0x10.0x1000 mm |
2 x | Beech dowels 10 mm x 1000 mm |
1 x | Walnut wood slat 2.0x2.0x1000 mm |
1 x | Fuel Fittings-Red |
1 x | 550 cc gasoline fuel tank complet |
1 x | FESTO connector M7 barb fitting 4mm |
1 x | 500 ccm gasoline fuel tank |
1 x | FESTO connector M7 barb fitting 6mm |
1 x | Quick hose connector 6-4 mm |
1 x | T-Hose connector 4-4-4mm |
1 x | FESTO connector M7 barb fitting XL Tygon |
1 x | "Taxi Tank" Fuel Tank |
1 x | Conector FESTO M3 Quick 3mm 90º |
1 x | Extra hard 250 ccm complete gasoline fuel tank |
1 x | Y-Hose connector 4-4-4mm |
1 x | 280 cc gasoline fuel tank complet |
1 x | FESTO connector M5 Quick 6 mm |
1 x | Support 45% Hopper JetsMunt |
1 x | Fuel Fittings-Blue |
1 x | Conector FESTO G1/8 Quick 4mm 90º |
1 x | Check valve quick hose connector 4-4 mm |
1 x | Fuel tank 1500ml (50oz) |
1 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
1 x | Silicone red 6,0 qmm wire (25 m) |
1 x | Protective Cover for wires Ø 3 mm 1000 mm |
1 x | Cable set PREMIUM Maxi, SUB-Done 4three fuselage/wing 200 cm |
1 x | Extension MPX-MPX 20 cm |
1 x | Fiberglass heat shield Ø 8 mm 1000 mm |
1 x | FESTO connector M7 Quick 4mm 90º |
1 x | Spinner Alumin. fixed propeller 40 mm / 4,0 mm |
1 x | Spinner NUT M5 |
1 x | ED Position Lights wireless (Set of 3) |
2 x | NF-3X-350 set |
2 x | Antena FUTABA RX 606/607/6014/2006/2008/3008/7006/7008, 2 pcs. |
1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
1 x | Switch Cap L (Blue) |
1 x | Futaba R7114SB 2.4GHz FASTT/FASSTest S.BUS Receiver |
1 x | Futaba Radio Case |
3 x | Jet Afterburner Simulator NF-Jet3 RY |
1 x | Wheel collar 2 mm Ø (4 uds) |
1 x | Teacher-student connector T12FG/FX-30 |
2 x | Charger FUTABA SQN30W12P-08 220v |
1 x | Katana Mini carbon wheel pants (2 pcs) |
1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
1 x | LED blink wire flashing (red - 2pcs) |
1 x | LED blink wire flashing (green - 2pcs) |
2 x | NF-3X-80 liner Kit |
2 x | NF-1 RC set |
2 x | Jet Afterburner Simulator NF-Jet2YY Set |
3 x | Jet Afterburner Simulator NF-Jet2 |
3 x | Jet Afterburner Simulator NF-Jet3 YSW |
2 x | Jet Afterburner Simulator NF-Jet1RY Set |
1 x | MULTIPLEX ALUMINUM CASE "M-LINK" |
2 x | Switch moment button, 2 functions, long FUTABA |
1 x | Decorative caps, multicoloured, short |
1 x | Receiver Futaba R1008SB 8-channel 2.4 GHz FHSS |
2 x | Interruptor FUTABA FX-MZ (2 Posic. corto) |
1 x | Switch Cap L (silver) |
1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | Futaba R3006SB T-FHSS 2.4GHz |
1 x | Futaba S-Bus Rx/Gyro Link Lead |
1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
2 x | Receptor FUTABA R3106GF T-FHSS |
1 x | Futaba S-Bus Rx/Gyro Link Lead |
1 x | Antena FUTABA receptor Standard 2.4 GHz ( 160 mm aprox.) |
1 x | Receiver R7008SB FASSTest |
1 x | Receiver GRAUPNER GR-12 HoTT |
1 x | Receiver FUTABA R6004 FF FAST |
2 x | Receiver FUTABA R7014SB FASST Test |
1 x | Transmitter Balancer Futaba T-10CG |
1 x | Neck strap Double V2 |
1 x | Jet Afterburner Simulator NF-Jet3 RYS |
1 x | R617 FS 2,4 GHz receiver |
1 x | Switch Cap M (red) |
1 x | Wheel collar 4 mm Ø (4 uds) |
1 x | Wheel collar 3 mm Ø (4 uds) |
1 x | Receptor FUTABA R7006SB FASSTest/FASST |
1 x | Tray for FUTABA 14SG/16SZ |
2 x | Ant. Cable R606/17/08/14FS L:1500mm |
2 x | Antena FUTABA R7108/7014/7114SB (1 pc) |
2 x | Futaba R3008SB T-FHSS 2.4GHz S.Bus2 8/32 Channel Receiver |
1 x | Charger HITEC CG-42 TX 7.2v/ RX 4.8v (80 mA) |
1 x | Switch Cap M (silver) |
1 x | |
1 x | Propeller 3x3 |
1 x | AIRSPEED SENSOR SBS01TAS |
1 x | Tank BULL MØ1 (3.2 L) + 1x (0.9 L) + 1x (0.9L Smoke) PRO |
1 x | Support conector MPX (6 pcs) |
1 x | Support Flush MPX Conector (6 pcs) |
1 x | Recessed MPX connector support (6 pcs) |
1 x | Soporte grifo FESTO vertical (1 pcs) |
1 x | Support pump Xicoy X45 |
1 x | Support pumb/filter Xicoy X45 |
1 x | Motor Mega AC 16/35/01 |
1 x | Motor Mega AC 16/25/02 |
1 x | Motor Mega AC 22/35 4S |
1 x | Motor Mega AC 16/15/04 |
1 x | FUTABA 6L + R3106 2.4GHz |
1 x | X-RAY Micro QR (Elevator) |
1 x | Futaba Multi-Switch-Prop 12+2 MODUL |
1 x | Battery FUTABA Li-Fe 2100 mAh 6.6v 4PLS/4PX/8J/10J/14SG/18SZ |
1 x | Futaba 32MZ 2.4GHz + R7108SB |
1 x | FUTABA 32MZ TRANSMITTER + R7108SB RECEIVER |
1 x | Futaba S9650/9670SV - Upper Case |
1 x | Tank BULL MØ1 3L+14L Smoke (CMJets) |
1 x | Tank BULL MØ1 4L (CMJets) |
1 x | Bags BULL Mo1 2.6m "Luxe" |
1 x | Motor DA 60 |
2 x | Trailing edge BALSA 35x8x1000 mm |
1 x | 110 degree stainless steel bend D=18mm, widened to 20mm |
1 x | Air Intake manifold 90° - Large |
1 x | Giant Scale Muffler D.A. 150 (2 pcs) |
1 x | Birch plywood plate 600x300x3.0 mm |
1 x | Dubro Fuel Tank Cap/Fittings 2-24oz Tanks Gas |
1 x | Hopper 125 ml XICOY with support |
1 x | Propeller MASTER AIRSCREW 9x6 |
1 x | Silicone 0,35 qmm servos cable Futaba (5 m) |
1 x | Silicone 0,14 qmm servos wire Graupner (100 m) |
1 x | Propeller MEJLIK 30x12 |
1 x | EasyFLY Addon |
1 x | Tapa estado carga XT-60 (6 pcs) |
1 x | Soporte grifo FESTO (2 pcs) |
1 x | Tube support Ø 6mm (10 pcs) |
1 x | Pasacables rectangular 40x15 mm (4 pcs) |
1 x | Support ECU Xicoy X-45 |
1 x | Aro pasacable Ø20 mm (4 pcs) |
1 x | Angle support XT60 conector |
1 x | Soporte filtro FESTO (4 pcs) |
1 x | Support Pitot JETI |
1 x | Support Antena 2.4 Ghz (2 pcs) |
1 x | Support Filtro FESTO |
1 x | Support FUEL DOT V3 |
1 x | Aro pasacable Ø25 mm (4 pcs) |
1 x | Motor Mega AC 22/45/03 E |
1 x | Motor Mega AC 22/20/03 |
1 x | Motor Mega AC 16/20/02 |
1 x | Motor Mega AC 22/30/02 |
1 x | 300 Newtons FEMA absorber |
1 x | Motor DA 85 |
1 x | Propeller APC 10x3,8 SF |
1 x | Propeller APC 11x4.7 SF |
1 x | Propeller APC 10x7 SF |
1 x | Propeller APC 11x10 Electric |
1 x | Regler autostarter MOKIS250 |
1 x | Propeller APC 10x4.7 |
1 x | Carburator Moki S 180 |
1 x | Motor Moki S 250 cc 5 cyl with autostarter |
1 x | Propeller APC 11x7 Electric |
1 x | Propeller APC 12x4.5 MR Electric Pusher |
1 x | Walnut wood slat 1.5x1.5x1000 mm |
1 x | Propeller APC 10x3,8 SF Electric Pusher |
1 x | Propeller APC 11x8 Electric |
1 x | Carburator gasket MOKI |
1 x | Propeller APC 10x6 Electric |
1 x | Motor Moki S 300 cc 5 cylinders |
1 x | Stainless Steel Muffler D.A. 35-70 |
1 x | Motor DLE 35 RA |
1 x | KS86 V muffler up to 65cc |
1 x | Birch plywood plate 600x300x4.0 mm |
1 x | Refueling Cap V3 Red |
1 x | MASTER 16x10 tree blades propeller |
1 x | Fuel Dot (Black) |
1 x | Air Trap Mounting - 175ml |
1 x | Propeller MASTER 7x6 |
1 x | HOPPER tank INTAIRCO iTrap 30 PRO 3x FESTO 4mm 90º |
1 x | HOPPER tank INTAIRCO iTrap 40 95 ml 3x racor 6mm CLASSIC PRO |
1 x | Fuel dot V3 (Red) |
1 x | Silicone 0,14 qmm servos wire Graupner (5 m) |
1 x | Ball link M3 (6 uds) |
1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
1 x | Cabel PVC 2 x 0.25 mm2 (5 m) red-black |
1 x | PVC 0,35 qmm servos wire Graupner (100 m) |
1 x | 4 LiPo XH>EH adapter |
1 x | Silicone 0,50 qmm servos wire Futaba (100 m) |
1 x | White silicone 0,25 qmm wire (100 m) |
1 x | 30 cm BEC cable (female) |
1 x | PVC 0,14 qmm servos wire Graupner (100 m) |
1 x | 3 LiPo XH>EH adapter |
1 x | Support XT60 conector (2 pcs) |
1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
1 x | Black silicone 0,25 mm² wire (25 m) |
1 x | 5 LiPo XH>EH adapter |
1 x | Silicone 0,25 qmm servos wire Graupner (5 m) |
1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
1 x | PVC 0,08 qmm Futaba servos wire (5 m) |
1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
1 x | Cabel "Y" 30 cm (graupner) |
1 x | 30 cm BEC cable (male) |
1 x | Propeller APC 9x6 Glow/Gas |
1 x | FALCON 25X9 CARBON PROPELLER (GAS) |
1 x | Propeller APC 11x7 Glow/Gas |
1 x | Helice APC 14x4 W |
1 x | FALCON 24X12 CARBON PROPELLER (GAS) |
1 x | Propeller MEJLIK 20x13 N-3 Blades |
1 x | Propeller APC 11x6 Glow/Gas |
1 x | Propeller MEJLIK 24x10 TH |
1 x | FALCON 33X11W CARBON PROPELLER (GAS) |
1 x | 75 mm spinner (Carbon Imitation) |
1 x | ITRAP 40 (95ML) CLASSIC PRO, FESTO 4MM QS ELBOW CONNECTIONS |
1 x | Switch Cap L (black) |
1 x | VARIO module Hott |
1 x | Receiver FUTABA R7108SB FASSTest/FASST |
1 x | Spinner NUT M6 |
1 x | Spinner NUT M5 |
1 x | Spinner 40 mm Black (Kavan) |
1 x | Maleta transporte FUTABA 10PX |
1 x | Battery FUTABA 18MZ |
1 x | Stainless Steel Bend D 15x0,4mm |
1 x | Receiver GRAUPNER GR-16 HoTT |
2 x | NF-3m Heli Kit |
1 x | NF-2 RC set |
1 x | NF-3XL set |
1 x | Adap/Exten for Futaba 12-14C |
1 x | Tray for FUTABA 18 SZ |
1 x | Switch Cap M (blue) |
|
32,841.32EUR |