2 x | Chili F3K 2 wing servo mounted |
1 x | X-RAY Micro QR (Fuselage with canopy) |
3 x | X-RAY Micro QR |
1 x | Ion Pro NG electric with flaps GREEN Fluor (JP Model) |
1 x | USBCOM 5i |
1 x | LA500 housing-upper cyclic |
4 x | Nut M1,6 |
1 x | Motor rotor LA-500 |
4 x | Balls 4 mm |
2 x | Screws M1,6x6 Allen |
2 x | Blade holder lower |
1 x | Motor wall |
1 x | AC-10 pre-rotacion with motor |
1 x | Rotorshape Elevator |
2 x | Servo Fork |
1 x | Grub screw M3x3 shouldered (2 pcs) |
1 x | Straightened rod Ø 2.0 mm x 1000 mm |
1 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
1 x | Straightened rod Ø 5.5 mm x 1000 mm |
1 x | Set stickers JEEMO "Andy" |
3 x | Mini DART 2 F3K carbon light 1m Green |
1 x | XICOY X45 rail |
1 x | X-RAY Micro QR (Tail Tube) |
1 x | Chili Race F3K (aramid nose) |
2 x | X-RAY Micro QR (Elevator) |
1 x | ORACOVER Ferrari red (2 m) |
1 x | KAVAN Hand crank fuel pump |
1 x | Propeller diller for EME35 and DLE35 |
1 x | Spring clamp for tube Ø50 mm |
1 x | Ball link M3 RPA's-UAV's |
1 x | Connectors banna oro 3 mm (M/F) |
1 x | Release wax 250ml |
1 x | M3 Maxi ball link (2 uds) |
1 x | 800TVL CMOS camera for FPV |
1 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
1 x | Short ball link M3 (6 uds) |
1 x | 105 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | 2,4x1000 mm 2:1 red termoretract tube |
1 x | B4-0 rocket charges (6 pcs) |
1 x | Central piece 42 mm 0º [12 mm] |
1 x | Partall paste 650 g |
1 x | M3 INDUSTRIAL ball link (2 uds) |
1 x | Hose clips 6 mm |
1 x | Spinner Alumin. propeller pleg. 30 mm / 3,0 mm |
1 x | Extension silicon 50 cm (Futaba) |
1 x | Spare spinner 36 mm 3-Bl |
1 x | Extension silicon 30 cm male (Futaba) |
1 x | Gasket electric Fuel Pump |
1 x | MYLAR film A350 (1000x500 mm) |
1 x | Junta humo metalica G85 (DLE85/DLE170) |
1 x | Red spinner 45 mm |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Joint with bearing M3 22x5,5 |
1 x | Circlick securite |
1 x | 1/10 Pilot "Jimmy" |
1 x | Extension 90 cm (Futaba) |
1 x | Angle of incidence meter |
1 x | CN-Spinner propeller pleg. 36 mm / 6 mm |
1 x | Electromotor starter EME 35cc |
1 x | Interface Realflight Simulator |
1 x | Spinner Alumin. propeller pleg. 40 mm / 4,0 mm |
1 x | Round Rod 2,0x1000 mm |
1 x | Red smoke canister 65 g |
1 x | Conector JR Servo male (10 pcs) |
1 x | Yellow smoke bombs AX-60 (5 pcs) |
1 x | ABS angle 4,0x4,0x1000 mm |
1 x | Profile ABS half cane 4x2.5x1000 mm |
1 x | ABS Strip 1.0x4.0x1000 mm |
1 x | 12.7 mm 2:1 black termoretract tube |
1 x | Connectors banna oro 3,5 mm (M/F) |
1 x | Central piece 72 mm 0º |
1 x | Brass rod Ø 1.0 mm x 1000 mm |
1 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
2 x | Locking cable tie 3.2x142 (uds) |
2 x | Stainless steel cable Ø 0.5 mm (10 m) |
1 x | Cierre cabina aluminio Ø4, I=10 mm |
1 x | Cierre cabina aluminio Ø5, I=16 mm |
2 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
1 x | Cable video GoPro |
2 x | Stainless steel cable Ø 0.5 mm (2 m) |
1 x | Soporte filtro FESTO (4 pcs) |
1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
3 x | Head upper part |
3 x | Cierva C30 spanish decoration Stickers |
1 x | Head spacer |
2 x | Alu servo arm double RHINO |
2 x | Servo GO-1035MG 16 kg.cm 0.08s/60º |
3 x | Screw M3x16 |
2 x | Cierva C30 Body Spain |
3 x | Ball joint long |
3 x | Blade holder upper |
2 x | Nut M2 securing |
2 x | Cierva C30 simulated motor |
3 x | Bearing 3x6x2,5 |
1 x | Blade holder center |
2 x | Head runner |
2 x | Cierva C30 Elevator |
2 x | Screws flush mount M2 |
1 x | Baering 3x8x4 |
1 x | 4Wx2 Power Navigation Light, 13mm, T-Fuse White |
1 x | Carbon fiber rod 10 mm x 1000 mm |
1 x | Carbon fiber flat 1000x3.0x0.13 mm |
1 x | Squared carbon wing joinner 5x5x220 mm |
1 x | ABS tube 3.0x1.0x1000 mm |
1 x | Profile ABS triangular 6.0x1000 mm 90º |
1 x | Electric Fuel Pump 12v |
1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
1 x | White spinner propeller pleg. 36 mm / 4 mm |
1 x | Straightened rod Ø 1.5 mm x 1500 mm |
1 x | Brass rod Ø 0.8 mm x 1000 mm |
1 x | Spinner propeller pleg. 33 mm / 6,0 mm |
1 x | Flap hinge 33x9 mm (6 pcs) |
1 x | Long pinned hinge (12 uds) |
1 x | Z Spinner (CN) 40mm |
1 x | Pin hinge 26x11 mm (10 uds) |
1 x | Tapa estado carga XT-60 (6 pcs) |
1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
1 x | JEEMO Kit ARF Basic (2 color Carbon finish) XTRALIGHT |
1 x | JEEMO Kit ARF Basic (2 color) - XTRALIGHT |
1 x | 16mm Gear-Spotlight, 4W |
1 x | Lense for Spotlights, 20mm |
1 x | 3x8W Triple-Spotlight, 12mm, T-Fuse White |
2 x | Profile ABS half cane 4x1000 mm |
1 x | Zurich Sport Sunglasse Dark Sensity BROWN Glasses |
1 x | Profile ABS Square 4 x 1000 mm |
1 x | Profile ABS triangular 4.0x1000 mm 60º |
1 x | Rubber profile 6-2 mm 2M |
1 x | ABS tube 8.0x7.0x1000 mm |
1 x | Carbon fiber rod 6.0 mmx1000 mm |
1 x | SLICK 360-A 104" (2640 mm) |
1 x | Ferrita 14x8x5.5 mm |
1 x | Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm) |
1 x | Rubber profile 8-2 mm 2M |
1 x | Propeller MEJLIK 29x10S |
1 x | ABS tube 14.0x10.0x1000 mm |
1 x | Propeller MEJLIK 18x8 CFK |
1 x | Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm |
1 x | Hard brass tubing (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
1 x | ABS tube 10.0x8.0x1000 mm |
1 x | Carbon fiber rod 14 mmx1000 mm |
1 x | Carbon fiber rod 1.5 mm x 1000 mm |
1 x | Propeller MEJLIK 23x8 CFK |
1 x | Motor XPower F2915/12 XLight |
1 x | EDGE 540-A 105" (2660 mm) |
1 x | Profile ABS half cane 7.0x1000 mm |
1 x | Carbon fiber rod 20 mmx1000 mm |
1 x | Spinner propeller pleg. 38 mm / 5 mm |
1 x | Large flex hinge (12 uds) |
1 x | White spinner propeller pleg. 42 mm / 4 mm |
1 x | Soporte grifo FESTO (2 pcs) |
1 x | 15 mm reinforced hinge |
1 x | Nylon hinge 15x0,3 (10 pcs) |
1 x | DYNAMOMETER S-1580 |
1 x | Medium pin type hinge (12 uds) |
1 x | Propeller 12x6 Falcon electric |
2 x | Split pin 1x8 mm (10 uds) |
2 x | Pushrod greyline 4/3 with coupler M3 |
2 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
1 x | Wheel keeper washer |
2 x | Head lower part |
2 x | Steering lever |
1 x | Aro pasacable Ø25 mm (4 pcs) |
1 x | Spare white 38-45 mm spinner |
1 x | Spinner propeller pleg. 40 mm / 6 mm |
1 x | Tube support Ø 6mm (10 pcs) |
1 x | Spinner propeller pleg. 30 mm / 5,0 mm |
1 x | FALCON 28X10 CARBON PROPELLER (GAS) |
1 x | Baseplate servo |
1 x | Support conector MPX (6 pcs) |
1 x | Straightened rod Ø 14.0 mm x 1000 mm |
1 x | Straightened rod Ø 4.0 mm x 1000 mm |
1 x | Spinner propeller pleg. 33 mm / 5,0 mm |
1 x | Angle support XT60 conector |
1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
1 x | FALCON 33X11W CARBON PROPELLER (GAS) |
1 x | TX 250 mW especial GOPRO |
1 x | Fully Threaded Steel Rod M3 |
1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
1 x | Ventus 1:4 set of instruments |
1 x | Locking cable tie 4.6x203 (uds) |
1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
1 x | Split pin 1.6x16 mm (10 uds) |
1 x | Pushrod greyline 3/2 with coupler M2 L: 1000 mm |
1 x | Cable video GoPro and 5V cable |
1 x | Snap long M2 (10 uds) |
1 x | Bujia OS G5 gasolina |
1 x | Landing gear frontal support 29x26x13,5 |
1 x | Pushrod octagone 4/3 with coupler M3 |
1 x | Head core bushing |
1 x | M2-250 mm Carbon Fiber Adjustable Push Rod Sets (2 pcs) |
2 x | Landing gear frontal support 25x32x16 |
1 x | Snap for floding prop for 2 mm axi |
1 x | Fully Threaded Steel Rod SUS303 65 mm M3 (2 pcs) |
1 x | Screw-lock connector M2 (2 uds) |
2 x | One touch canopy lock |
1 x | Press fitting for 1,0 diam. steel cable (10 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 90 mm M3 (2 pcs) |
1 x | Screw-lock connector Ø 2 mm (2 uds) |
1 x | Micro Tarjeta SD Rapid Rush 16 GB |
1 x | Stainless steel cable Ø 0.5 mm (20 m) |
1 x | Snap short M2 (10 uds) |
1 x | Snap pin for micro clevis (10 uds) |
1 x | Split M1,2x10 (10 pcs) |
1 x | Pushrod octagone 3/2 with coupler M2 |
1 x | Fully Threaded Steel Rod M2,0 (2 uds) 250mm |
1 x | Servo RHINO pro SHV digi 4 |
1 x | Propeller Pleg CAM Carbon 11x8 |
1 x | Raer wall |
1 x | Nut M2 |
|
12,260.51EUR |