Top » Catalog » Motors & Turbines » Explosion » Gasoline » GAUI » GAUF50

1,490.00EUR

Motor GAUI F-50
[GAUF50]

The Gaui F-50 4-stroke petrol engine is a "jewel" in terms of processing and operating characteristics. Who had this engine even in hands will be more than thrilled with its processing.
The engine was originally designed to operate in drones and has already proven there for many years. Now benefits the customer. Because the standard model engine is not designed for continuous operation at full throttle. For engines for drones but this is an elementary property. Thus, the G-Power 4-stroke engine for a long time at hard full throttle. This is reflected in the chosen materials and the design again.
It has of course truly cleaned for sale as a model engine. And with a love of detail, as they are hardly never found.
Here, this engine is available in different designs. So as a side carburetor and as Rear intake and with or without electric starter.
Only those who are absolutely convinced of his product, will provide a guarantee on the legally mandated term addition. G-Power goes even much further. There is a lifetime warranty on most components of the motor granted. The exact warranty terms are available as a download.

Features:
Crankcase: high-strength aluminum, CNC milled and black anodized
Cylinder: aluminum, CNC milles, coated Nikasil
Pistons: aluminum weight-optimized, 1 piston ring
Cylinder head: Aluminium; CNC milled and black anodized, integrated valves
Crankshaft: steel, crank pin for connection Starter prepared
Connecting rod: aluminum with double-sided bronze bearings
Propeller fixing: central bolt 10mm, with six M4 Allen screws
Carburetor: Walbro WT 452
Board starter (only in versions with starter): electric, 2-stage gear transmission and freewheel, including control electronics.

Features:
Cubic capacity: 50cc
Bore: 42mm
Stroke: 35.5mm
Weight: 1610g (incl. Ignition), 2060 grams (incl. Electric starter and ignition)
Speed range: 1200 - 7000 1 / min
Fuel: mixture of premium petrol / synthetic oil
Mixing ratio: 1:20

Package:
Engine Including carburetor, spark plug and engine support for Backmount
Electronic ignition
Manifolds with Deffusor - Silencer
Propeller mounting bolts and drive plate
Cable protection conduit and connector securing clips

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
    Oils/Smoke Liquids
    Gasoline->
      DA
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NGH motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      Spare DA
      Spare parts DLE
      Spare parts MVVS
      Spares Zenoah/ZG
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesories/Muflers
    Glow->
  Turbines->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Brazo servo MKS Doble Metal L:2.5/3 inc
26.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Flap hinge (6 pcs)
2 x	48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x	Medium pin type hinge (12 uds)
1 x	Fast'n EZ-CA-Hinge (12 uds)
1 x	Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x	67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x	33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x	Gates hinge aluminium (1 pcs)
1 x	Long pinned hinge (6 uds)
1 x	18 mm reinforced hinge
2 x	Nylon hinge 20x15x0,3 (10 pcs)
1 x	Fast'n EZ-CA-Hinge, lite (12 uds)
1 x	67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Large flex hinge (12 uds)
1 x	Long pinned hinge (12 uds)
1 x	Gates hinge
1 x	Pin type hinge Al 4,5x70 mm demount (2 pcs)
1 x	Pin type hinge Al 4,5x70 mm (2 pcs)
2 x	Gates hinge black 30x16 mm (2 pcs)
1 x	Pin type hinge Al 3,0x50 mm (2 pcs)
1 x	Nylon hinge for flaps/gates 27x10,5 (2 pcs)
2 x	25 mm reinforced hinge
3 x	Indoor hinge with servo arm integraded
1 x	Gates hinge 30x16 mm (2 pcs)
2 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x	Nylon hinge 20x20x0,3 (10 pcs)
1 x	Nylon hinge 15x0,3 (10 pcs)
1 x	Pin type hinge Al 6x98 mm (2 pcs)
1 x	Straightened rod Ø 4.5 mm x 1000 mm
1 x	Brass rod Ø 0.5 mm x 1000 mm
1 x	Straightened rod Ø 5.5 mm x 1000 mm
1 x	Brass rod Ø 1.0 mm x 1000 mm
1 x	Straightened rod Ø 0.5 mm x 1000 mm
1 x	Straightened threaded rod M2-1m
1 x	Brass hexagonal rod Ø 3 mm x 1000 mm
2 x	Xplorer1 anemometro
1 x	Straightened rod Ø 8.0 mm x 1000 mm
2 x	Straightened rod Ø 5.0 mm x 1000 mm
1 x	Straightened rod Ø 0.8 mm x 1000 mm
1 x	Straightened rod Ø 4.0 mm x 1000 mm
3 x	Straightened threaded rod M3 - 1m
1 x	Xplorer3 anemometro
1 x	Brass rod Ø 1.5 mm x 1000 mm
2 x	Brass hexagonal rod Ø 5 mm x 1000 mm
2 x	Straightened rod Ø 3.0 mm x 1000 mm
2 x	Brass rod Ø 0.8 mm x 1000 mm
2 x	Straightened rod Ø 6.0 mm x 1000 mm
1 x	Straightened rod Ø 2.0 mm x 1000 mm
1 x	Connectors banana oro 6,0 mm Ultralight (M/F)
1 x	Connectors banna oro 4 mm (M/F) (ultralight)
2 x	EC5-Set male, simple quality, 2 x female pin, 1 x blue housing
1 x	Connectors banna gold 5,5 mm (M/F)
1 x	Connectors banna oro 8,0 mm 5 pcs(Female)
1 x	Conector BEC male (10 pcs)
2 x	2 mm female connector (2 pcs) with safety connector
1 x	Connectors banna oro 2 mm (M/F) (ultralight)
1 x	30 cm DEANS female connector
2 x	XH female balance (2S) connector (2 pcs)
3 x	Connectors banna oro 8,0 mm (Male) 5 pcs.
2 x	XH male balance (3S) connector (2 pcs)
1 x	EC5-Set female, simple quality, 2 x female pin, 1 x blue housing
1 x	Connectors banna oro 4 mm (M/F)
2 x	MPX Sub-D Adaptor
2 x	XH male balance (5S) connector (2 pcs)
2 x	Connectors banna oro 6,0 mm (M/F)
1 x	XH female balance (5S) connector (2 pcs)
3 x	Connectors DEANS 4 pins (1 pair)
1 x	Ballast 700gr OPALE
1 x	Paramotor Trike XL
1 x	Set cintas unión paracaídas 145 cm
1 x	Windsock Ozone L - 700 mm
1 x	Silicone 0,35 qmm servos wire Graupner(100 m)
1 x	Silicone 0,25 qmm servos wire Graupner (5 m)
1 x	10m servo "Premium" wire (white/red/blue)
2 x	PVC 0,14 qmm servos wire Hitec/Mpx (5 m)
1 x	Silicone 0,14 qmm servos wire Graupner (100 m)
2 x	Cabel PVC 2 x 0.25 mm2 (5 m) red-black
2 x	Silicone 0,35 qmm servos wire Futaba (100 m)
1 x	5 line servos wire black (1 m)
2 x	Silicone red 0,25 mm² wire (25 m)
2 x	Softshell Hispano Aviación
1 x	LOWER TOW HOOK
2 x	Vest clothes Hispano Aviación
1 x	Shirt Hispano Aviación
1 x	Towing hook
1 x	Towing hook
1 x	Fixed launching hook
1 x	SERVO HOLDER
2 x	Towing hook <3m
1 x	1/12 Pilot "Fighter"
1 x	Piloto RC Civil 1/5- 1/6 Scale 12"
1 x	1/10 Pilot "Jack"
2 x	1/10 Pilot "Jimmy"
2 x	1/4 Pilot "Heidi"
3 x	1/6 Pilot "Garry"
1 x	Pilot "Duke" Legends Series (Slimline)
1 x	1/6 Pilot "John"
1 x	Piloto jet 130 mm
1 x	Piloto WWII USAAF 12" Scale 1/6 - 1/5
1 x	Civilian pilot "Joe" size 9cm (Slimline)
1 x	Civilian pilot "Gramps" size 9cm (Slimline)
1 x	Pilot WWII US Navy Pacific 12" Scale 1/6-1/5
1 x	Pilot "Adolf" Legends Series (Slimline)
2 x	Piloto JET 1:3,5
1 x	Pilot "Anthony" (Slimline)
2 x	Pilot "Dick" Legends Series (Slimline)
1 x	Brass control horn M3 short for wire (2 pcs)
1 x	SE Ring 250 mm (2 pcs)
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x	Pine wood slat 5.0x5.0x1000 mm
1 x	Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm)
1 x	43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	1000 ml sealer (DOPE)
1 x	Aluminium cap bolt washer M4 red (8 pcs)
1 x	Aluminium rod Ø 4.0 mm x 3000 mm
1 x	Micro flex hinge (12 uds)
1 x	Nylon hinge for flaps 33x9 (2 pcs)
1 x	Futaba 14/20 mm servo pull-pull double arm with ball link
1 x	FUTABA 20 mm servo arm with ball link
1 x	Angle support XT60 conector
2 x	Aro pasacable Ø25 mm (4 pcs)
1 x	Soporte grifo FESTO (2 pcs)
1 x	Straightened rod Ø 14.0 mm x 1000 mm
1 x	Xplorer2 anemometro
1 x	Futaba S-Bus Rx/Gyro Link Lead
1 x	Adap/Exten for Futaba 12-14C
1 x	Red 4 mm connector holder
1 x	Switch moment button, 2 functions, long FUTABA
2 x	XH female balance (7S) connector (2 pcs)
2 x	MR30 connector male
1 x	Red 3m5 mm connector holder
2 x	Connectors banna oro 3 mm (M/F)
2 x	Bag connector 2 mm
1 x	Conector JR Servo female (50 pcs)
2 x	Switch Cap L (silver)
2 x	Connectors MPX male (PIN double)
1 x	Transmitter Balancer Futaba FF9-DX7-JR-Hitec
2 x	Connectors MPX male
1 x	Switch Cap M (black)
1 x	XT-30 connector (pair)
1 x	XT-60 connector (male)
2 x	Protector Connector Dean-T (1 pair)
2 x	Connectors MPX black male
1 x	30 cm MULTIPLEX female connector
1 x	Conector JR/Uni Servo female BLUE silicon (10 pcs)
2 x	Connectors MPX female
2 x	XH female balance (8S) connector (2 pcs)
1 x	MPX PCB "4 Pins", 5 pieces
1 x	Conector JAPAN G2 Set 5 pares
3 x	PIN Connector female (100 pcs)
1 x	Connectors MPX black female
2 x	Antenna FUTABA 2.4GHz 3PM/8FG/14SG/18SZ/18M
1 x	Tray FUTABA T6K,T10J,T12K,T14SG,T16iZ,T18SZ,T18MZ,T32MZ
1 x	Transmitter Balancer Futaba V
1 x	Connectors DEANS (T) micro
2 x	XH male balance (2S) connector (2 pcs)
1 x	Conector JR Servo female (10 pcs)
1 x	Conector XT-30 (macho)
1 x	Soporte carbono MR30 (2 pcs)
1 x	Conector MR-60 (pareja)
1 x	XT60 Connector with Holder Male 2pcs
2 x	2 mm male connector (2 pcs) with safety connector
1 x	Conector JR/Uni Servo male BLUE silicon (10 pcs)
1 x	Connectors banna oro 2 mm (M/F)
1 x	280 cc gasoline fuel tank complet
1 x	1/6 Pilot "Tony"
1 x	20x200 mm battery rings
1 x	Straightened rod Ø 1.5 mm x 1500 mm
1 x	120x60 mm SLH KOVO wheel
1 x	Blades 330mm
1 x	Straightened rod Ø 1.5 mm x 1000 mm
1 x	1/7 Pilot "Japanese"
1 x	110x55 mm C SLH KOVO wheel
1 x	110x55 mm SLH KOVO wheel
1 x	170x54 mm SLH KOVO wheel with bearing and metal hub
1 x	"Taxi Tank" Fuel Tank
1 x	Silicone 0,25 qmm servos wire Graupner (100 m)
1 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x	Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC
1 x	100m servo "Premium" wire (white/red/blue)
1 x	Protective Cover for wires Ø 6 mm 1000 mm
1 x	JR silicone servo wire 0,35 qmm / 5m
1 x	6 mm Quick clamp_S (10 pcs)
1 x	Silicone 0,50 qmm servos wire Futaba (100 m)
1 x	Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE
1 x	XH 30 cm Female extension 0,25 mm2 silicone cable for 4 cell
1 x	Marker ties (20 pcs)
1 x	SE Ring 300 mm (2 pcs)
1 x	Yellow smoke canister 100 g
1 x	SE Ring 350 mm (2 pcs)
1 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Foil for sticking flaps and ailerons
2 x	Spikes Band (5 m)
1 x	SE Ring 400 mm (2 pcs)
1 x	PVC 0,14 qmm servo wire Futaba (5 m)
1 x	Cable set PREMIUM Maxi, SUB-Done 4three fuselage/wing 200 cm
1 x	Silicone 0,50 qmm servos wire Graupner(5 m)
1 x	PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m)
1 x	Cable set PREMIUM, fuselage/wing
1 x	Silicone black 6,0 qmm wire (25 m)
1 x	XH 30 cm Male extension 0,25 mm2 silicone cable for 2 cell
1 x	PVC 0,25 qmm servos wire Graupner (5 m)
1 x	White silicone 0,25 mm² wire (25 m)
1 x	PVC 0,08 qmm Futaba servos wire (5 m)
1 x	Set cables carga (Mini-JST, JST, XT60, Dean, EC3, TRX, Micro-T,
1 x	28 mm turnbuckle
1 x	3 mm Prop Adapter M6
1 x	Adjustable launching hook
2 x	LiPo Storage Box Type "P"
1 x	Civilian pilot "Curt" size 9cm (Slimline)
1 x	Civilian pilot "Pamela" size 9cm (Slimline)
1 x	Support Filtro FESTO
1 x	Support XT60 conector (2 pcs)
1 x	Support FUEL DOT V3
1 x	Soporte filtro FESTO (4 pcs)
1 x	30 cm BEC cable (female)
1 x	Cable Cargador FUTABA
1 x	DPSI Ampere & Voltage bundle
1 x	Recessed MPX connector support (6 pcs)
1 x	Support Flush MPX Conector (6 pcs)
1 x	Soporte grifo FESTO vertical (1 pcs)
1 x	Support conector MPX (6 pcs)
1 x	Support Antena 2.4 Ghz (2 pcs)
1 x	DPSI RV Mini 5 (2008)
1 x	DPSI Micro MPS
1 x	DPSI Micro - RCS
1 x	PVC 0,35 qmm servos wire Graupner (100 m)
1 x	Filter Capacitor JR
1 x	Silicone 0,14 qmm servos wire Graupner (5 m)
1 x	LiIon Battery 3000 mAh 3.3v 15A (2 pcs)
2 x	Magnetic Connect locking system
1 x	Cabel "Y" 30 cm (graupner)
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	PWC4 wing/fuselage connector for 4 servos
1 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	Receiver bed (Blue)
1 x	SWTU2 switch
2 x	Switch Cap M (blue)
2 x	Banna gold connector 2,5 mm (M/F)
1 x	TX Tray V1 Hand Rests only
1 x	Propadapter for motor A50
2 x	XH female balance (3S) connector (2 pcs)
1 x	EWC3 40 cm wing connector
1 x	PowerFuel RX V2 Fuel Pump
1 x	MPX PCB "6 Pins", 5 pieces
1 x	Conector FUTABA Servo female (10 pcs)
1 x	Conector JR Servo female (10 pcs)
2 x	Decorative caps, multicoloured, short
1 x	Conector AS150 7mm antichispazo (Set: 2 pares)
1 x	Conector FUTABA Servo male (10 pcs)
1 x	Switch Cap L (black)
1 x	Conector XT-150 6mm (Set: 5 pares)
1 x	Gold antispark 4 mm plug
2 x	Switch Cap M (silver)
1 x	MPX screwable clips (5 pcs)
1 x	TX-Tray V1 (L) (Black)
1 x	Tray for FUTABA 14SG/16SZ
1 x	Neck strap Double V2
1 x	Transmitter Balancer Futaba T-10CG
1 x	Connectors DEANS (T)
1 x	XH male balance (7S) connector (2 pcs)
1 x	Transmitter Balancer HITEC Aurora 9, JR and Spectrum (blue)
1 x	Optotronix Aurora Plug
1 x	Transmitter Stick Ends V1 Red - M3 (2 pcs)
1 x	Antenna Hole Cap V1 (Silver)
1 x	MPX Support (2 pcs)
1 x	Gold antispark 5,5 mm plug
1 x	MPX PCB "Gender-Changer (5 pcs)
1 x	102x26 Ø6.0 mm aluminium core wheel
1 x	SE Ring 330 mm (4 pcs)
1 x	XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 4 cell
1 x	XH 30 cm Female extension 0,25 mm2 silicone cable for 3 cell
1 x	Cinta Goldfix 1m
1 x	PVC 0,14 qmm servos wire Graupner (100 m)
1 x	BULL MØ1 2.600mm GREEN
1 x	1 m servo "Premium" wire (white/red/blue)
1 x	Sebart 2.2 m WHITE/BLUE (SebART)
1 x	Z Spinner (CN) 32mm
1 x	Battery LiPo GENS 1800 mAh 4S 14.8v 25C (Gens Ace)
1 x	Transom 59x46 mm
1 x	Battery LiPo GENS 5300 mAh 4S 14.8V 30C (Gens Ace)
1 x	TWIST planeador gomas
1 x	Screwdriver for Torx® TX8
1 x	Screwdriver for Hexagon 1,5mm
1 x	Fan for A60
1 x	Cable adapter iCharger
1 x	A50 Motor Mount Alu complete set
1 x	JETImodel Addcap 1640

12,761.48EUR