2 x | Futaba male 40 cm extension |
1 x | Extension silicon 30 cm female (Graupner) |
1 x | Extension silicon 10 cm (Futaba) |
1 x | Extension S-Bus 1-2 silicon 120 cm FUTABA |
1 x | Futaba Female 40 cm extension |
1 x | Extension silicon 75 cm (Futaba) |
1 x | Extension silicon 50 cm (Futaba) |
1 x | 0,14 mm PVC servo wire extension, ZH micro conector. |
1 x | Extension PVC 150 cm (Graupner) |
1 x | Cable silicona macho batt. receptor 30 cm (Graupner) |
2 x | Extension silicon 10 cm (Graupner) |
1 x | Cable silicona female batt. receptor 30 cm (Futaba) |
1 x | Extension silicon 50 cm (Graupner) |
1 x | Extension silicon 25 cm (Futaba) |
1 x | Cabel "Y" 30 cm (graupner) |
1 x | Extension silicon 35 cm (Futaba) |
1 x | Extension silicon 100 cm (Graupner) |
1 x | servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT |
1 x | Extension silicon 100 cm (Futaba) |
1 x | silicon 100 cm Futaba Extension Ø 0,35 mm |
2 x | Futaba Female 40 cm extension |
1 x | Pine wood slat 10x10x1000 mm |
1 x | BALSA triangular 15x15x1000 mm |
1 x | Pine wood slat 5.0x5.0x1000 mm |
1 x | Liston HAYA 8 x 8 x 1000 mm |
1 x | OBECHI sheet 2.0x3.0x1000 mm |
2 x | Mahogany wood slat 3.0x3.0x1000 mm |
3 x | BALSA trip 10x10x1000 mm |
1 x | Beech dowels 2.0 x 1000 mm |
2 x | Liston HAYA 10 x 10 x 1000 mm |
1 x | BALSA trip 3.0x3.0x1000 mm |
1 x | Pine wood slat 2.0x2.0x1000 mm |
1 x | Linden wood slat 3.0x3.0x1000 mm |
1 x | Beech dowels 10 mm x 1000 mm |
1 x | BALSA triangular 6x6x1000 mm |
1 x | BALSA trip 5.0x5.0x1000 mm |
1 x | Linden wood slat 2.0x2.0x1000 mm |
1 x | BALSA trip 4.0x4.0x1000 mm |
1 x | BALSA trip 2.0x2.0x1000 mm |
1 x | BALSA trip 2.0x10.0x1000 mm |
1 x | Walnut wood slat 3.0x3.0x1000 mm |
2 x | BALSA triangular 8x8x1000 mm |
1 x | Pine wood slat 2.0x10.0x1000 mm |
1 x | Mahogany wood slat 2.0x2.0x1000 mm |
1 x | Walnut wood slat 2.0x2.0x1000 mm |
2 x | Pine wood slat 3.0x7.0x1000 mm |
1 x | Ventus 1:4 set of instruments |
1 x | Circlick securite |
1 x | Extension silicon 30 cm male (Futaba) |
1 x | Extension silicon 35 cm male (Futaba) |
2 x | Tube Pitot to PIXHAWK |
1 x | Yellow smoke canister 65 g |
1 x | ABS tube 5.0x4.0x156 mm |
1 x | CF tube set (Ø 38 mm y Ø 14 mm) |
1 x | Civilian pilot "Curt" size 9cm (Slimline) |
1 x | Extension silicon 25 cm (Graupner) |
1 x | Blue metalic ball link M2/2 azul (2 pcs) |
1 x | Ball link M2,5 (10 pcs) |
1 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
1 x | Cable S.BUS 3 salidas 300 mm |
1 x | Carbon fiber rod 1.0 mm x 1000 mm |
1 x | Balsa panel 2.0x100x1000 mm |
2 x | A/C quality beech plywood 600x300x6.0 mm |
1 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | Beech dowels 3.0 x 1000 mm |
1 x | Birch plywood plate 600x300x1.5 mm |
1 x | Pine wood slat 6.0x6.0x1000 mm |
1 x | 3 LiPo XH>EH adapter |
1 x | PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m) |
1 x | Cabel "Y" 30 cm (Futaba) |
1 x | Silicone 0,25 qmm servos wire Graupner (5 m) |
1 x | Silicone 0,50 qmm servos wire Futaba (100 m) |
1 x | Cabel charger transmitter GRAUPNER |
1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
1 x | PVC 0,08 qmm Graupner servos wire (5 m) |
1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
1 x | 2 LiPo XH>EH adapter |
1 x | Cable Cargador FUTABA |
1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
1 x | Silicone 0,14 qmm servos wire Graupner (100 m) |
1 x | Aluminium ignition bad (blue) |
2 x | Selfstarr DLE55, EME55/60, DLA56, SE 55 |
1 x | Propeller POWER-PROP 7x7 |
1 x | Power MULTIlight |
1 x | 10 mm gas motor standoff |
1 x | 110x55 mm C SLH KOVO wheel |
1 x | Junta humo metalica G55 (DLE55/DLE111/DLE222) |
1 x | 115x29 mm (4.50") Type jets aluminium core wheel |
1 x | 200 mm extensión servo HITEC/JR |
1 x | 1/12 Pilot "Langley" |
1 x | 1/7 Pilot "Japanese" |
1 x | 1/10 Pilot "Jimmy" |
1 x | 120x60 mm C SLH KOVO wheel |
1 x | 1/10 Pilot "Jack" |
1 x | Compact on-board starting system (9715) |
1 x | GLOW 2C + accesories |
1 x | Exhaust elbow for SAITO FA65/72/80/82a/91S/100/ |
1 x | 1/4 Pilot "Heidi" |
1 x | O-ring Saito FG-73 5cyl |
1 x | 1/12 Pilot "Cougar" |
1 x | 1/12 Pilot "Tom" |
1 x | "Taxi Tank" Fuel Tank |
1 x | 160 mm carbon undercarriage (2pcs) |
1 x | 1/6 Pilot "Garry" |
1 x | 101x28 mm (4.0") Type jets aluminium core wheel |
1 x | 152x46 Ø6.0 mm aluminium core wheel |
1 x | Opto Gas Engine Kill Switch |
1 x | BALSA triangular 10x10x1000 mm |
1 x | Red aluminium servo arm V2-Futaba 1,25" inch M3 |
1 x | aluminium servo arm V2-JR 2,0 inch M3 |
1 x | 50x45 mm micro-mini servo cover |
1 x | Servo TOPMODEL S7520 MG |
1 x | Rudder 2_Tray 4~4.5 inch |
1 x | Red aluminium servo arm V3-Futaba 1,0inch |
1 x | Red aluminium servo arm V1-Futaba 15 mm iM2 |
1 x | Blue aluminium servo arm V2-Hitec 1,0 inch M3 |
1 x | Rudder 2_Tray 4.5~5 inch |
1 x | Red aluminium servo arm V1-Futaba 20 mm M2 |
1 x | Rudder 2_Tray 3.5~4 inch |
1 x | Red aluminium servo arm V3-Futaba 1,25inch M3 |
1 x | Red aluminium servo arm V2-Futaba 2,0 inch |
1 x | Blue aluminium servo arm V1-Hitec 1,25" inch M3 |
1 x | Blue aluminium servo arm V1-Hitec 1,0" inch M2 |
1 x | Blue aluminium servo arm V2-Hitec 1,75" inch M3 |
1 x | Servo Mount S (red) |
1 x | Red aluminium servo arm V2-Futaba 17 mm iM2 |
1 x | Oracover light Grey 2m |
1 x | Monokote ROJO misil (1.8x0.65m) |
1 x | Tapping Screw M2.2x13 (10 pcs) |
1 x | Screw M3x30 (10 pcs) |
1 x | Screw M3x8(10 pcs) |
1 x | 13 mm wing servo holder |
1 x | Digital Air Speed Sensor And Pitot Tube Set |
1 x | 12,7x1000 mm 2:1 green termoretract tube |
1 x | 30 cm BEC cable (male) |
1 x | 135 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | 5 LiPo XH>EH adapter |
1 x | 2,0x50 mm allen screwdriver |
1 x | 58 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | 2 mm male connector (2 pcs) with safety connector |
1 x | 2,4x1000 mm 2:1 black termoretract tube |
1 x | Concave-Convex sandpaper file 13 mm |
1 x | Battery LiPo GRE18 600 mAh 7.4v |
1 x | |
1 x | Ciano KAVAN Medium 20g |
1 x | Cable coupler M2 (10 uds) |
1 x | Connectors banna gold 5,5 mm (M/F) |
1 x | DPSI 2001 RV |
1 x | DPSI Micro SingleBat 5.9V/7.2V F3A Edition magnetic switch |
1 x | 45 mm aluminium spinner (Kavan) |
1 x | 150 mm inflatable superlight deluxe wheel (2 pcs) |
1 x | Birch plywood plate 600x300x1.2 mm |
1 x | Combustible Glow "KAVAN" air/heli 15% nitro |
1 x | Combo KAVAN PRO 3536-1000 + RAY 40 SB |
1 x | Connectors MPX 8 pins with support (black) 1 pair (male-female) |
1 x | Extension 6 lipos XH > EH |
1 x | Contacto macho pin conector (10 pcs) |
1 x | 120x60 mm SLH KOVO wheel |
1 x | Propeller APC 11x6 Glow/Gas |
1 x | Compact on-board starting system (9713) |
1 x | Distanzstück motor OS 120 AX |
1 x | 10cm Flexible Stainless Steel Exhaust Tubing D=25mm |
1 x | 29x12 prop Super Silence |
1 x | Servo TOPMODEL DS1413 T |
1 x | Blades 330mm |
1 x | Blade holder lower |
1 x | Battery plate |
1 x | Hose clamps 0.16-0.20in, (4 pieces) |
1 x | DPSI Ampere & Voltage bundle |
1 x | DPSI RV Mini 6 Magic with Gas-Cap switch |
1 x | DPSI Ampere battery backer |
1 x | Combo lighting module with covering drop shape |
1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
1 x | TUNED PIPE for motors up to 40-60 & 70-85 cc |
1 x | Mahogany wood slat 1.5x1.5x1000 mm |
1 x | Horn 20x28,5 mm (2 pcs) |
1 x | Seoul Power LED 3 watts PCB Sets: 1x white, 1x red, 1x green |
1 x | Tray for FUTABA 14SG/16SZ |
1 x | Propeller APC 11x4.7 SF |
1 x | Propeller APC 10x6 Electric Pusher |
1 x | Compact on-board starting system (9512) |
1 x | Propeller APC 10x4.7 |
1 x | Propeller MEJZLIK 21x10 Electric light (36 g) |
1 x | Propeller APC 10x5.5 MR Electric multirrotor |
1 x | 16mm Gear-Spotlight, 4W |
1 x | Propeller APC 11x5.5 Electric Pusher |
1 x | Propeller APC 12x4.5 MR Electric Pusher |
1 x | Propeller APC 10x4.5 MR Electric Pusher |
1 x | Propeller APC 11x3.8 SF |
1 x | Lense for Spotlights, 20mm |
1 x | Thixotropic agent TM 100, tin/ 75 g (approx. 1 l) |
1 x | Aluminium ignition bad (red) |
1 x | Pitts Muffler kit for CAP 21 |
1 x | 3-blades 30x12 carbon prop Super Silence |
1 x | Sandwich carbon + poplar 3mm + carbon 290x160 mm |
1 x | 55% silver electrodes (2 pcs) |
1 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Head core |
1 x | Rudder |
1 x | Ball joint long |
1 x | Nut M1,6 |
1 x | Balls 4 mm |
1 x | Head core bushing |
1 x | Steel Screw M1x8 (10 pcs) |
1 x | Motor wall |
1 x | Head lower part |
1 x | Head runner |
1 x | Screw M3x16 |
1 x | Side Plate |
1 x | Birch plywood plate 600x300x3.0 mm |
1 x | Motor ER-120 M3-34mm eje |
1 x | Balsa panel 3.0x100x1000 mm |
|
5,589.97EUR |