1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x Gates hinge black 30x16 mm (2 pcs)
1 x Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x Flap hinge (6 pcs)
1 x Gates hinge
1 x Unmounted aluminium pin 6x98 mm (2 pcs)
1 x Long pinned hinge (6 uds)
1 x Nylon hinge 15x0,3 (10 pcs)
1 x 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x 48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x Pin type hinge Al 4,5x70 mm demount (2 pcs)
1 x Pin type hinge Al 3,0x50 mm (2 pcs)
1 x Gates hinge aluminium (1 pcs)
1 x Long pinned hinge (12 uds)
1 x 67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x Pin type hinge Al 6x98 mm (2 pcs)
1 x Gates hinge 30x16 mm (2 pcs)
1 x Nylon hinge 20x20x0,3 (10 pcs)
1 x Miniature brass strap hinge, 1 m
1 x Small pinned hinge (12 uds)
1 x Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x Micro flex hinge (12 uds)
1 x 25 mm reinforced hinge
1 x Fast'n EZ-CA-Hinge (12 uds)
1 x Fast'n EZ-CA-Hinge, lite (12 uds)
1 x WingFix ULTRA Black Edition
1 x Truck-trailer for gliders 720 x 239 mm
1 x Carbon fiber rod 4.0 mmx1000 mm
1 x Carbon fiber rod 14 mmx1000 mm
1 x Carbon fiber rod 10 mm x 1000 mm
2 x Mahogany wood slat 3.0x3.0x1000 mm
1 x Linden wood slat 3.0x3.0x1000 mm
1 x Carbon fiber rod 1.5 mm x 1000 mm
1 x Carbon fiber rod 1.5 mm x 1000 mm
1 x Carbon fiber flat 1000x3.0x1.0 mm
1 x Carbon fiber flat 1000x3.0x0.5 mm
1 x Carbon fiber rod 0.8 mmx1000 mm
1 x Carbon fiber rod 1.0 mm x 1000 mm
1 x Trailing edge BALSA 35x8x1000 mm
1 x BALSA trip 6.0x6.0x1000 mm
1 x Pine wood slat 2.0x2.0x1000 mm
2 x Mahogany wood slat 1.5x1.5x1000 mm
3 x BALSA triangular 6x6x1000 mm
1 x Mahogany wood slat 2.0x2.0x1000 mm
1 x Carbon fiber flat 1000x3.0x1.0 mm
2 x Pine wood slat 10x10x1000 mm
2 x Walnut wood slat 2.0x2.0x1000 mm
1 x BALSA leading edge 8x10x1000 mm
1 x Carbon fiber rod 0.5 mmx1000 mm
3 x Walnut wood slat 1.5x1.5x1000 mm
1 x Ferrita con funda
1 x Stickers-digit for marking
1 x SERVO HOLDER
1 x Brass control horn M4 short for wire (4 pcs)
1 x Straightened threaded rod M2-1m
1 x ABS tube 8.0x7.0x1000 mm
1 x Cabel "Y" 30 cm (graupner)
1 x Civilian pilot "Gramps" size 9cm (Slimline)
1 x Antenna Cloverleaf 5.8 GHz Tx - Rx
1 x Medidor ángulos y/o incidencias
1 x Rocket cardboard tube 50mm x 48mm x 250mm
1 x BALSA trip 8.0x8.0x1000 mm
2 x Pine wood slat 3.0x7.0x1000 mm
2 x Pine wood slat 6.0x6.0x1000 mm
2 x Beech dowels 3.0 x 1000 mm
1 x BALSA trip 10x10x1000 mm
2 x OBECHI sheet 2.0x3.0x1000 mm
1 x BALSA triangular 15x15x1000 mm
1 x Pine wood slat 2.0x10.0x1000 mm
1 x A/C quality beech plywood 600x300x8.0 mm
1 x Plasti Dip Liquid Tape 429 ml black
1 x Partall paste 650 g
1 x Spinner propeller pleg. 38 mm/6,0 mm/5º
1 x Spinner propeller pleg. 30 mm / 3,0 mm
1 x Spinner propeller pleg. 30 mm/5,0 mm/0º
1 x Spinner propeller pleg. 38 mm/6,0 mm/0º
1 x Spinner propeller pleg. 36 mm/6,0 mm/0º
1 x ABS I Strip 10x5x1000 mm
1 x Round Rod 1,25x1000 mm
1 x BALSA trip 5.0x5.0x1000 mm
1 x Pine wood slat 1.5x3.0x1000 mm
1 x Beech dowels 10 mm x 1000 mm
1 x BALSA trip 2.0x2.0x1000 mm
1 x A/C quality beech plywood 600x300x5.0 mm
1 x BALSA trip 2.0x10.0x1000 mm
1 x A/C quality beech plywood 600x300x0.8 mm
1 x A/C quality beech plywood 600x300x1.5 mm
1 x A/C quality beech plywood 1520x750x3.0 mm
1 x BALSA trip 3.0x5.0x1000 mm
1 x A/C quality beech plywood 600x300x0.8 mm
2 x Pine wood slat 3.0x10.0x1000 mm
1 x Balsa panel 8.0x100x1000 mm
1 x Pine wood slat 3.0x5.0x1000 mm
2 x BALSA triangular 8x8x1000 mm
1 x Linden wood slat 2.0x2.0x1000 mm
1 x BALSA triangular 10x10x1000 mm
1 x Liston HAYA 8 x 8 x 1000 mm
1 x BALSA trip 4.0x4.0x1000 mm
1 x A/C quality beech plywood BIRCH 600x300x1.0 mm
1 x Cable video GoPro
1 x Surface Indicator Gauge Small
1 x 500 ml sealer (DOPE)
1 x Spray adhesive AEROFIX 2
1 x Universal Colour Paste deep black 250 g
1 x Propeller MENZ-S 15x8 3 blades
1 x Propeller MENZ-S 15x8
1 x Propeller MENZ-S 17x8
1 x Propeller MENZ-S 20x10 3 blades
1 x Remote electric ignition system
1 x AX-60 starters (5 pcs)
1 x Hopper UAT Sebar 400 ml
1 x SunCover 50 Class (SebART)
1 x Spray adhesive INFUTAC (Clear) 500 ml
1 x Hobbylite Filler, Balsa colour
1 x Spray EC Red 400ml
1 x Spray YELLOW Inca Lexan 150ml
1 x Paint gun for sprays
1 x Spannlack 1000 ml
1 x PARTALL® Hi-Temp Wax, 340 g
1 x 20 g tin paste
1 x Ball Link Plier
1 x 15 mm reinforced hinge
1 x Propeller MENZ-S 16x6 3-Blades
1 x Propeller MENZ-S 19x8 3-Blades
1 x Propeller MENZ-S 20x8
1 x Propeller MENZ-S 18x8
1 x Propeller MENZ-S 16x8
1 x Universal Colour Paste white 50 g
1,750.99EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies