4.50EUR

CA Glue fast 20g
[R1501032]


CA Glue fast 20g
Superglue (fast) is a normal type Cyanoacrylate adhesive with fast setting, high flow abilit, and good penetration characteristics.

It has been specially formulated to achieve the strongest possible bond between well-mated, non-porous surfaces, such as rubber, metals, plastics, glass, etc.

Single-component
Transparent
Very low viscosity, high setting speed
Bonds obtain hand strength after 2-15 seconds
Special bottle*
*A metal needle is fitted in the lid, which is pressed into the opening of the bottle's dosing attachment when it is screwed on. This reliably prevents leakage, drying out and sticking of the opening. The dosing attachment allows a fine dosing of the adhesive.

Physical properties
Liquid state
Base Ethyl Cyanoacrylat
Colour clear
Specific Gravity (at 20 °C) 1.053~1.060
Refraction Index (n 20 D) 1.439
Flash Point (°C) >80 °C
Boiling Point (°C) 65/6mm Hg
Viscosity (cP) 3-5
Cured state
Colour clear
Specific Gravity (at 20 °C) 1.1~1.3
Processing temperature -55 - 80 °C
Refraction Index (n 20 D) 1.49
Dielectric Constant (bei 10 MHz) 3.5
Dielectric Loss (bei 10 MHz) 0.067
Soluble in Acetone, Dimethyl formamide,Nitromethame and Dimethyl sulfoxide.
Bond strength (Tensile shear strength, cured for 24 hours at 20-25 °C)
kg/cm²
Rigid PVC to rigid PVC 40-60
ABS to ABS 50-70
Polycarbonate to polycarbonate 80-120
Polystyrene to polystyrene 30-45
Natural rubber to natural rubber 5-9
Steel to steel 190-210
Stainless steel to stainless steel 200-220
Aluminum to aluminum 160-180
Copper to copper 150-170
Steel to rigid PVC 50-60
Stainless steel to neoprene 5-10
SBR to SBR 5-10
Cure speed
Seconds
ABS to ABS 4-5
Wood to wood 50-60
ABS to stainless steel 5-10
NBR to stainless steel 3-5
NBR to NBR 3-5
Stainless steel to stainless steel 3-5
ABS to NBR 3-5
Wood to ABS 5-10
Storage and shelf life:
Our superglue can be stored in a cool and dark place for about 1 year (for example in the refrigerator at + 5 °C).
At room temperature about 6 months. At temperatures above 20 °C the shelf life is further reduced (e. g. in the summer months)


temporarily out of stock
temporarily out of stock

Reviews

Customers who bought this product also purchased
TYGON tubo 1 m Diam. 3.4 x 2.0  mm
TYGON tubo 1 m Diam. 3.4 x 2.0 mm

temporarily out of stock
temporarily out of stock

Tygon tube 6.35 - 3.18 mm 1m
Tygon tube 6.35 - 3.18 mm 1m

temporarily out of stock
temporarily out of stock

Propeller MENZ-S 23x8
Propeller MENZ-S 23x8

temporarily out of stock
temporarily out of stock

Sparkplug NGK CM6
Sparkplug NGK CM6

temporarily out of stock
temporarily out of stock

XT-60  connector (female)
XT-60 connector (female)

temporarily out of stock
temporarily out of stock

XT-60  connector (male)
XT-60 connector (male)

temporarily out of stock
temporarily out of stock

Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
  
  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
    Cianocrylate->
      BSI Cianocrilates
      Cyanocrylate R&G
      KAVAN Ciano
      Yuki Model
    Epoxy->
    Resin/Gelcoat
    Glass Bubbles
    Contact adhesive
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Complet landing gear
1 x Blades 330mm
1 x Head upper part
1 x Head lower part New
1 x Raer wall
2 x Blade holder lower
2 x Screws flush mount M2
1 x Blade holder center
1 x Wheel keeper washer
1 x Head spacer
1 x Steering lever
1 x Baering 3x8x4
1 x Head lower part
2 x Cierva C30 simulated motor
1 x Ball joint long
1 x Bearing 3x6x2,5
1 x Servo Fork
1 x Nut M2
1 x Head core
2 x Nut M2 securing
1 x Screw M3x16
2 x Balls 4 mm
2 x Blade holder upper
2 x Head core bushing
1 x Motor DLE 200cc Premium Muffler
2 x LA500 housing-upper cyclic
1 x Extension Arm for Carburetor
1 x LA500 pre-rotation gear hub
1 x Distanzstück motor OS 120 AX
2 x O-ring Saito FG-73 5cyl
1 x LA500 nose
1 x Junta humo metalica G55 (DLE55/DLE111/DLE222)
1 x SAITO FG-36 carburetor
1 x LA500 pilot-seat set
1 x Battery plate
1 x LA500 pre-rotation gear
1 x LA500 ciclic lever
2 x Suction funnel for carburetor DA70- MVVW 190cc (red)
1 x LA500 rotor head core
2 x Reed valve for DA 50-R
1 x Suction funnel for carburetor 90D-L (red)
1 x Grub screw M3x3 shouldered (2 pcs)
1 x Hose clips 6 mm
1 x CC 05
1 x MPX-Dean "T" Adapter
1 x Red copper lacquer wire Ø0,2 mm (5 m)
1 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x BEC 3A FOXY
1 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x 2 LiPo XH>EH adapter
1 x Dubro Fuel Tank Cap/Fittings 2-24oz Tanks Gas
1 x Carbon fiber rod 12 mm x 1000 mm
1 x Carbon fiber rod 0.5 mmx1000 mm
1 x Carbon fiber rod 1.0 mm x 1000 mm
1 x Aluminium wide washer M3 gold (4 pcs)
1 x Simulador RealFlight RF-9.5 S (sin emisora)
1 x LA500 freewheel bearing
1 x Interface Jack Adapter IKARUS
1 x Interface Realflight Simulator
1 x TP/TopFuel - JST-EH 4/5S Adapter
1 x Extension Arm for Carburetor (red)
1 x Nylon hinge 15x0,3 (10 pcs)
1 x 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x Carbon fiber flat 1000x3.0x1.0 mm
1 x Nylon hinge for flaps 33x9 (2 pcs)
1 x Fast'n EZ-CA-Hinge, lite (12 uds)
1 x DUBRO - CUB WHEELS (1/3 SCALE) (558TLC) - 2PCS
1 x Carbon fiber flat 1000x3.0x0.13 mm
1 x Carbon fiber flat 1000x6.0x0.8 mm
1 x Small pinned hinge (12 uds)
1 x Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm
1 x DUBRO - 102MM / 4" DIA BIG WHEELS (400RV) - 2PCS
1 x Carbon fiber rod 5.0 mmx1000 mm
1 x Carbon fiber rod 8.0 mmx1000 mm
1 x Unmounted aluminium pin 6x98 mm (2 pcs)
1 x Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x DUBRO - KWIK TWIST TOOL - TO TWIST STEEL WIRE (1 PC) (301)
1 x Ferrita 17x10x6.5 mm
1 x DLE 55 carburetor
1 x Junta humo metalica G30 (DLE30/DLE60)
1 x Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x Anodized aluminium servo M4x5/8 screw (4 lilac pcs)
1 x Blind nut M4 (4 pcs)
1 x 14x60 mm Mini rings Tie Wraps (4 pcs)
1 x Spring clamp for tube Ø50 mm
1 x Junta humo metalica G85 (DLE85/DLE170)
1 x 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Junta humo metalica G20 (DLE20/DLE20RA/DLE40)
1 x Exhaust elbow for SAITO FA65/72/80/82a/91S/100/
1 x Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
5,058.54EUR
Manufacturers
Manufacturer Info
R-G.de
R-G.de Homepage
Other products
Languages
Español English
Currencies