1,800.00EUR

Motor SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Comentarios
Aceptamos
Búsqueda Rápida
 
Use palabras clave para encontrar el producto que busca.
Búsqueda Avanzada
1 x Programador 5v SIO RS 232
2 x Cristal TX 35.050 Ch 65
2 x Regulador Mini-Pix 15 Amp
1 x Cristal Universal RX 35.070 Ch 67
1 x Controladora de motor individual SyRen 50A 6V-30V
1 x Servo GO-1023MG 7.0 kg.cm 0.09s/60º
1 x Varilla latón hexagonal Ø 3.5 mm x 1000 mm
1 x Tubo carbono (L 1000 mm, Ø16 mm, Ø12 mm)
1 x Rueda de cola de 28 mm
1 x Adaptador JST-XH
1 x Tubo de latón (L 1000 mm, Ø10,0 mm, Ø9,1 mm)
1 x Horn metálico ajustable rosca M3
2 x Plancha de goma espuma (310x210x2 mm)
1 x Listón de HAYA redondo 4,0 x 1000 mm
1 x Varilla latón Ø 0,8 mm x 1000 mm
1 x Cable carga XT90
1 x Base de soporte montaje servos Std. apaisado
1 x Brazo servo 54 mm Futaba con rótula
1 x Fuente Alimentación HITEC 30A Max.540w
1 x Fuente alimentacion NT 40 Amp.
1 x TMM 2512-3S heli
1 x CC 01
1 x Capuchón decorativo interruptores TX
1 x CC 02
1 x CC 11 Conector
1 x Maleta aluminio MULTIPLEX MLink
1 x Cargador FUTABA SQN30W12P-08 220v
1 x USBCOM 5i
1 x Conector JAPAN G2 Set 5 pares
1 x Swing 1000
1 x Morro metálico PROJETI
1 x Bancada motor EDGE 540 48"
1 x Morro OPTIMA 2.200 mm (Elec ó Planeador)
1 x Bancada motor clase 48"
2 x Anillo espaciador para hélice graupner 8/5.5 mm
1 x Capuchón L interruptor aluminio azul
1 x Correa V2 doble
1 x Capuchón decorativo interruptores TX cortos
1 x Bancada receptor (Azul)
1 x Prolong/Adap correa HITEC Aurora 9, JR y Spectrum (azul)
1 x Soporte FPV Station para pupitre TX-Tray V1
1 x Maleta transporte FUTABA 10PX
1 x PSC 6
1 x Maleta FUTABA Aluminio
1 x PSC 5
1 x Bateria FUTABA 18MZ
1 x Prolong/Adap correa SPK DX-8
1 x Espuma caja emisora FUTABA longe case
1 x Capuchón M interruptor aluminio azul
1 x Capuchón L interruptor aluminio rojo
1 x Soporte Guia Antena doble
1 x HBC 10035-3 32-Bit
1 x Prolong/Adap correa Futaba V
1 x CC 03
1 x Antena FUTABA 2.4GHz 3PM/8FG/14SG/18SZ/18M
1 x Prolong/Adap correa Futaba 12-14C
1 x Prolong/Adap correa Futaba T-10CG
1 x Tapón antena V1 Futaba-JR (Plata)
1 x Antena FUTABA 35 mhZ 3PM/3FRF/4V/4Y/6EX/6X/6Y/7C
1 x Pupitre Contest-SPult mc-20/mc-24
1 x Capuchón M interruptor aluminio negro
1 x Prolongador Cable S-Bus
1 x CC 05
1 x Interruptor SWTU2
1 x Prolong/Adap correa FF9-DX7-JR-Hitec
1 x CM-3
1 x Stick para emisora FUTABA con interruptor de 3 posiciones
1 x Interruptor largo dos posiciones FUTABA
1 x Capuchón M interruptor aluminio rojo
1 x Regulador Master MEZON 120
1 x Regulador KAVAN R-80SB SBEC 80A
1 x Regulador X-75-OPTO-Pro
1 x Oracover Gris Seafire Sea 2m
1 x Servo KST MS825 V8.0 35kg 8.4v
1 x Varilla latón Ø 1,5 mm x 1000 mm
1 x Antena RX 85 mm HoTT
1 x Brazo servo 20 mm FUTABA con rótula
1 x Cinta adhesiva impermeable, ancho 19 mm, largo 25 m
1 x Bayoneta ULTIMATUM 2.0 m
1 x Oracover Gris claro 2m
1 x Hélice 44,0 mm (hélice izquierda)
1 x Varilla latón hexagonal Ø 5 mm x 1000 mm
1 x Varilla latón hexagonal Ø 4 mm x 1000 mm
1 x Soporte metal para servos
1 x Plancha aluminio 500x250x0.5 mm
1 x Cierre cabina
1 x Varilla acero Ø 6,0 mm x 1000 mm
1 x Helice Race 40 mm 1/4"(hélice derecha)
1 x Tubo aluminio (L 1000 mm, Ø4,0 mm, Ø3,1 mm)
1 x Bisagra de Flaps 33x9 mm (6 uds)
1 x Varilla acero Ø 5,5 mm x 1000 mm
1 x Varilla acero Ø 14,0 mm x 1000 mm
1 x Plancha contrachapado Abedul 600x300x6,0 mm
1 x Epoxy L 40 min. (1 Kg) 715g Resina / 285g Hardener S (15 min)
1 x Tubo carbono 3K-PW (Ø25 mm, Ø21 mm L:1000 mm)
1 x Fibra de vidrio 80 g/m² (2 m x 100 cm)
1 x Cable simulador USB multiplayer
3,306.13EUR
Fabricantes
Información del Fabricante
Saito
Otros productos
Idiomas
Español English
Monedas