1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Pin type hinge Al 4,5x70 mm to wire (2 pcs)
1 x Nylon hinge 20x20x0,3 (10 pcs)
1 x Mould Resin P 10 kg
2 x resin-hardener L-385 H-385 (625 g)
2 x Mould Resin P + Hardener EPH 161-P, kit/ 585 g
2 x Hardener Aero EPH 161 (250 g)
1 x Hardener EPIKURE™ Curing Agent MGS™ LH285, bottle/ 800 g
1 x Gates hinge aluminium (1 pcs)
1 x 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x Hardener P-25, canister 2.5Kg
1 x Flap hinge (6 pcs)
1 x 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x 48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x Hardener Aero EPH 161 (500 g)
1 x Nylon hinge 15x0,3 (10 pcs)
1 x Small pinned hinge (12 uds)
1 x resin-hardener package L-385 with hardener H-385 (3.5 Kg)
1 x Gates hinge
1 x Epoxy Resin L + Hardener CL (60 min) kit/ 930 g
1 x 67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x Micro flex hinge (12 uds)
1 x Gates hinge black 30x16 mm (2 pcs)
1 x 25 mm reinforced hinge
1 x Epoxy Resin L 285 + Hardener 386, kit/ 1.35 kg
1 x Epoxy Resin L (2.5 Kg)
1 x White gelcoat 1 Kg
1 x Flap hinge 33x9 mm (6 pcs)
1 x Fast'n EZ-CA-Hinge, lite (12 uds)
2 x Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 2.8 kg
1 x Pin type hinge Al 4,5x70 mm (2 pcs)
1 x Large flex hinge (12 uds)
1 x Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x resin-hardener package L-385 with hardener H-385 (875 g)
1 x Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x Pin type hinge Al 3,0x50 mm (2 pcs)
1 x Pin type hinge Al 4,5x70 mm demount (2 pcs)
2 x Extractor piñones 2.3/3.2 mm
1 x Fast'n EZ-CA-Hinge (12 uds)
1 x Windsock Ozone L - 700 mm
2 x Ballast 700gr OPALE
2 x Parachute BACKUP X100
1 x Aramid 50 daN 50 m
1 x Trike XL motor set (motor+esc+prop)
2 x Parachute P4
1 x Opale Rucksack
1 x Wing OXY 0,5 pulgadas2
1 x Para-RC "RC-Evo-Cross" Rescue
2 x Parachute PV6 for F3J
1 x Windsock Ozone L -1200 mm
1 x Para-RC Trike "RC-Bullix"
2 x Set cintas unión paracaídas 145 cm
1 x Carbon fiber rod 5.0 mmx1000 mm
1 x Squared carbon wing joinner 5x5x220 mm
1 x Ball link M2 (10 pcs)
1 x Thread locker IC-Loc™ red "high" 10 ml
1 x U Profile ABS 2,0x4,0x1000 mm
1 x SE Ring 200 mm (2 pcs)
1 x Support Filtro FESTO
1 x Support pump Xicoy X45
1 x Support ECU Xicoy X-45
1 x Support XT60 conector (2 pcs)
1 x Tube support Ø 6mm (10 pcs)
1 x Angle support XT60 conector
1 x Tapa estado carga XT-60 (6 pcs)
1 x Aro pasacable Ø20 mm (4 pcs)
1 x XH 30 cm Male extension 0,25 mm2 silicone cable for 4 cell
1 x XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 2 cell
1 x resin-hardener L-385 H-385 (1250 g)
1 x Small pinned hinge (6 uds)
1 x Unmounted aluminium pin 6x98 mm (2 pcs)
1 x Epoxy Resin L 285 + Hardener 386, kit/ 675g
3 x Indoor hinge with servo arm integraded
1 x Pin type hinge Al 6x98 mm (2 pcs)
1 x 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x Alignment dowels (2 parts, outer-Ø 8 mm) bag/ 100 pairs
2 x Wing OXY 5,0 m2
1 x Paramotor Kit Camo H1.5/ Ben Red
1 x LUCAS pilot ARTF
2 x Rescue 1,8m2 / BackPack
1 x XH 30 cm Female extension 0,25 mm2 silicone cable for 5 cell
1 x XH 30 cm Female extension 0,25 mm2 silicone cable for 3 cell
1 x BALSA trip 5.0x5.0x1000 mm
2 x Propeller 8x4,3 SlowFlyer
1 x Spinner fixed propeller 60 mm / 5,0 mm
1 x Recessed MPX connector support (6 pcs)
1 x Nylon hinge 20x15x0,3 (10 pcs)
1 x Para-RC Mix
1 x Aro pasacable Ø25 mm (4 pcs)
2 x Charger Li Polymer Multi-Cell Multi-Rate Charger (MCMR)
1 x Spinner propeller pleg. 38 mm / 6,0 mm
1 x Spinner propeller pleg. 38 mm/6,0 mm/7º
1 x Spinner propeller pleg. 36 mm/6,0 mm/0º
1 x Spinner propeller pleg. 30 mm/5,0 mm/0º
6,624.52EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies