1 x | Silicone 0,35 qmm servos cable Futaba (5 m) |
1 x | Black spiral protective cover for wires Ø 0,5/50 mm - 25 m |
1 x | Cable Cargador FUTABA |
1 x | Green silicone 0,25 mm² wire (25 m) |
1 x | 1 m servo "Premium" wire (white/red/blue) |
1 x | Protective Cover for wires Ø 15 mm 1000 mm |
1 x | Set cables carga (Mini-JST, JST, XT60, Dean, EC3, TRX, Micro-T, |
1 x | Black silicone 1,0 qmm wire (50 m) |
1 x | Protective Cover for wires Ø 6 mm 1000 mm |
1 x | PVC 0,14 qmm servos wire Hitec/Mpx (5 m) |
1 x | Silicon red 1,0 qmm cable ( 25 m) |
1 x | Protective Cover for wires Ø 20 mm 1000 mm |
1 x | Green silicone 0,25 qmm wire (50 m) |
1 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
1 x | Red silicone 1,0 qmm wire (50 m) |
1 x | Black silicone 0,25 mm² wire (25 m) |
1 x | Protective Cover for wires Ø 10 mm 1000 mm |
1 x | Cable set PREMIUM, fuselage/wing |
1 x | JR silicone servo wire 0,35 qmm / 5m |
1 x | Silicon black 2,5 qmm cable ( 25 m) |
2 x | PVC 0,08 qmm Futaba servos wire (5 m) |
1 x | PVC 0,14 qmm servos wire JR/Graupner (5 m) |
1 x | Protective Cover for wires Ø 3 mm 1000 mm |
1 x | Cable set PREMIUM , fuselage/wing one4one |
1 x | PVC 0,14 qmm servos wire Graupner (100 m) |
1 x | Silicone 0,25 qmm servos wire Graupner (5 m) |
1 x | 6 mm Quick clamp_S (10 pcs) |
1 x | 10 mm Quick clamp_L (6 pcs) |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
1 x | Carbon roving DowAksa / 24k / 1600 tex |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
1 x | ARAMID honeycomb 1300x2600x2 mm |
1 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 25 m |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
1 x | Fibra carbono 3k tela 160g/m2 100 cm x 5m |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
1 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
1 x | Carbon fibre sleeve 12k 170 mm x 5m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
1 x | Vacuum bag, 1200 mm x 50 m |
1 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
2 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
2 x | Horn 5/10 with M2 Bearing |
1 x | Cable control set |
1 x | Adapter lead MPX/EC3 |
3 x | JETImodel SINGLE BEC |
1 x | Horn 13,5x16 mm (2 pcs) |
1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
1 x | Cabel charger transmitter GRAUPNER |
1 x | USB HLS prog. interface |
1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
2 x | Horn with ball 40x30 |
1 x | Horn 20x28,5 mm (2 pcs) |
2 x | Tape GFK 25 mm |
1 x | Tape GFK 38 mm |
1 x | Cable with accesories |
2 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
1 x | SE Ring 400 mm (2 pcs) |
2 x | LH long aluminium horn L31xH30 (2pcs) |
1 x | SERVO HOLDER |
1 x | TrainerCord (master-learner) |
1 x | Horn with ball 55x40 |
1 x | SE Ring 200 mm (2 pcs) |
1 x | Towing hook |
1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
2 x | 20x200 mm battery rings |
2 x | SE Ring 450 mm (2 pcs) |
4 x | Cinta Goldfix 1m |
2 x | Horn for flap control (1 pcs) |
1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
2 x | SE Ring 300 mm (2 pcs) |
2 x | 20x1000 mm Ring Strap Back To Back |
1 x | 2 LiPo XH>EH adapter |
2 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | 6 mm red aluminium threaded horn with patella |
1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
2 x | Horn 5/20 with M2 Bearing |
1 x | Horn 6/35 with M3 Bearing |
1 x | MPX-Dean "T" Adapter |
2 x | Brass control horn M2 short for wire (2 pcs) |
1 x | Adjustable launching hook |
3 x | RUDDOG Protection and Heat Shield Tape (2mx50mm) |
1 x | CC 02 |
1 x | CC 05 |
1 x | 6 mm aluminium horn with patella |
3 x | SE Ring 480 mm (2 pcs) |
1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
2 x | Horn 16,5x20 mm (2 pcs) |
1 x | Copper lacquer wire Ø0,2 mm (5 m) |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Circlick securite |
3 x | SE Ring HACKER 300 mm (2 pcs) |
2 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
2 x | Aluminum Bayonet / strongal D25 mm / 1 m |
1 x | Towing hook |
1 x | |
1 x | Adapter lead MPX/XT60 |
1 x | Bec MR UBEC 5A (5v/6v/7v) |
1 x | Small aluminium horn red (2pcs) |
1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
1 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
1 x | APM2.6 Power module with 5.3V DC BEC |
1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
1 x | Futaba External voltage input cable Futaba CA-RVIN-700 |
1 x | Marker ties (20 pcs) |
3 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
2 x | LOWER TOW HOOK |
1 x | LH long black aluminium horn L31xH30 (2pcs) |
1 x | BEC 3A FOXY |
1 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
1 x | Dean "T" - Futaba Adapter |
1 x | CC 03 |
1 x | Brass control horn M4 short for wire (4 pcs) |
1 x | Cierre cabina aluminio Ø4, I=10 mm |
2 x | Locking cable tie 3.2x142 (uds) |
1 x | Steering arm 12 mm Ø 4 mm |
1 x | Covered closure or fairings |
1 x | Cabin latch Fox MDM1 4m (pair) |
2 x | Stainless steel cable Ø 0.5 mm (20 m) |
1 x | Stainless steel cable Ø 1.3 mm (10 m) |
1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
1 x | Screw-lock connector M2 (2 uds) |
1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
1 x | Stainless steel cable Ø 0.62 mm (10 m) |
1 x | Steering arm 16 mm Ø 3 mm |
1 x | Canopy Lock V1 M3 Blue (2 pcs) |
1 x | One touch canopy lock |
1 x | Aluminium alloy coupler for carbon tube 6/M4 |
2 x | Pin type hinge Al 6x98 mm (2 pcs) |
1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | 15 mm reinforced hinge |
1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
2 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
1 x | 18 mm reinforced hinge |
1 x | Miniature brass strap hinge, 1 m |
2 x | Nylon hinge 20x15x0,3 (10 pcs) |
1 x | |
3 x | 1,5x50 mm allen screwdriver |
1 x | BALSA trip 2.0x10.0x1000 mm |
1 x | Pine wood slat 1.5x3.0x1000 mm |
1 x | Liston HAYA 8 x 8 x 1000 mm |
1 x | BALSA triangular 6x6x1000 mm |
2 x | |
2 x | Z Bender - S Type Tool |
1 x | BALSA triangular 15x15x1000 mm |
2 x | Starter EM Gear Power 250 |
1 x | BALSA leading edge 8x10x1000 mm |
1 x | Walnut wood slat 2.0x2.0x1000 mm |
2 x | Screwdriver for Torx® TX8 |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs) |
1 x | Vacuum pump 12 CFM |
1 x | Pine wood slat 2.0x2.0x1000 mm |
1 x | BALSA trip 4.0x4.0x1000 mm |
2 x | Beech dowels 3.0 x 1000 mm |
2 x | Linden wood slat 3.0x3.0x1000 mm |
1 x | Z Bender - S Type Tool |
1 x | Walnut wood slat 1.5x1.5x1000 mm |
1 x | Beech dowels 2.0 x 1000 mm |
1 x | Disposable Injector Bags (30x16cm) 100 pcs |
1 x | Crimping tool |
2 x | 3,0x60 mm allen screwdriver |
2 x | Ball Link Plier |
2 x | Pine wood slat 5.0x5.0x1000 mm |
1 x | BALSA trip 3.0x3.0x1000 mm |
1 x | Hot Glue Stick GREEN |
1 x | Pine wood slat 3.0x5.0x1000 mm |
1 x | BALSA triangular 8x8x1000 mm |
1 x | Liston HAYA 10 x 10 x 1000 mm |
1 x | Starter EM Gear Power 80 |
1 x | Starter 12v (Max 90 and 15ccm) |
1 x | Crimping tool |
2 x | PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs) |
1 x | PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E |
2 x | Starter Sullivan-STAR 603 DINATRON |
1 x | Pine wood slat 3.0x7.0x1000 mm |
2 x | Walnut wood slat 3.0x3.0x1000 mm |
2 x | Hot Glue Stick RED |
1 x | OBECHI sheet 2.0x3.0x1000 mm |
1 x | Pine wood slat 3.0x10.0x1000 mm |
1 x | Screwdriver for Hexagon 1,27mm |
1 x | Brass rod Ø 1.5 mm x 1000 mm |
2 x | Straightened rod Ø 0.8 mm x 1000 mm |
1 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
1 x | Straightened rod Ø 0.5 mm x 1000 mm |
2 x | Brass rod Ø 0.8 mm x 1000 mm |
3 x | Straightened rod Ø 1.5 mm x 1000 mm |
2 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
1 x | Straightened rod Ø 5.0 mm x 1000 mm |
2 x | Straightened rod Ø 7.0 mm x 1000 mm |
1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
1 x | Straightened rod Ø 4.5 mm x 1000 mm |
1 x | Initior Receiver FRX2 Wireless |
1 x | ABS tube 18.0x16.0x1000 mm |
1 x | Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm) |
1 x | Foam plastic plates (310x210x2 mm) |
1 x | Chopped glass fibre strands 3 mm |
1 x | TP/TopFuel - XH 2/3S Adapter |
1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(140 mm wheel with b |
2 x | Electronic switch JETI SP06 Opto |
1 x | CC 01 |
1 x | Servo slow down unit (0,7-14,7 sec ) |
2 x | Small aluminium horn blue (2pcs) |
4 x | Spikes Band (5 m) |
2 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 5 m |
1 x | Small control horn with bearing (2 pcs) |
1 x | SE Ring 240 mm (2 pcs) |
1 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
1 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Female connector for 20 pines AWG |
1 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
2 x | SE Ring 350 mm (2 pcs) |
1 x | Horn 5/15 with M2 Bearing |
2 x | SE Ring 330 mm (4 pcs) |
1 x | Female connector JST SH 1.0mm with 10 cm wire |
1 x | Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
1 x | 120x60 mm SLH KOVO wheel |
2 x | Hot Glue Stick BLACK |
1 x | Copier 5x20 cm pcs |
1 x | Canopy Latch |
1 x | Straightened rod Ø 14.0 mm x 1000 mm |
2 x | Straightened rod Ø 6.0 mm x 1000 mm |
1 x | Straightened rod Ø 2.0 mm x 1000 mm |
1 x | 41x5,5 mm wires output (2 pcs) |
1 x | M2-250 mm Carbon Fiber Adjustable Push Rod Sets (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 60 mm M3 (2 pcs) |
1 x | Pushrod octagone 3/2 |
1 x | Split pin 1.6x16 mm (10 uds) |
1 x | Lead with adhesive (2 pcs) |
1 x | Pushrod octagone 4/3 with coupler M3 |
1 x | Pushrod greyline 4/3 with coupler M3 |
1 x | Snap short M2 (10 uds) |
1 x | Fully Threaded Steel Rod Duralumin 100 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 80 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 30 mm M3 (2 pcs) |
1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
1 x | Fully Threaded Steel Rod alumin 40 mm M3 (2 pcs) |
1 x | Small aluminium horn gold (2pcs) |
1 x | Cockpit latch closing I=10 mm |
1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
1 x | Cockpit aluminium closing |
1 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 40 mm M3 (2 pcs) |
1 x | Electric spoiler 250 mm (2 pcs) |
1 x | Split pin 1x8 mm (10 uds) |
1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Brazo servo KAVAN doble aluminio 25T - 2.5" M3 |
1 x | Set brocas Ø 1.2-1.4-1.6-1.8 mm (4 pcs) |
1 x | Wooden mouth spatulas (150 x 18 x 1.5 mm), 100 pcs |
2 x | Fabric scissors curved Premium, 16 cm / 6" length |
1 x | Long pinned hinge (12 uds) |
1 x | Gates hinge black 30x16 mm (2 pcs) |
1 x | 2,5x60 mm allen screwdriver |
1 x | Futaba S3010 Servo - Standard BB 0.16s/6.5kg |
1 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
1 x | Servo FUTABA HPS-A700 Digital S-Bus |
1 x | Servo FUTABA S 9670 SV |
1 x | Ventus 1:4 set of instruments |
1 x | Futaba BLS152 - Upper Case |
1 x | Servo GO-1023MG 7.0 kg.cm 0.09s/60º |
1 x | Fresa corte diamante Ø 2.3mm (bola) |
1 x | "L" servo arm 65x49 mm (2 pcs) |
1 x | Gear for D 54 |
1 x | Micro control horn (2 pcs) |
1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | Servo FUTABA BLS 276SV |
1 x | Servo GO-09 9g |
1 x | Servo GO-02 Digital 1.8g |
1 x | Micro flex hinge (12 uds) |
1 x | PROXXON - DRILL SET 0,5-3,2MM (10PCS.) |
1 x | Servo FUTABA BLS175 SV |
1 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
1 x | Servo GO-1035MG 16 kg.cm 0.08s/60º |
1 x | Fresa corte diamante Ø 2.7mm (bola) |
1 x | Futaba 3010 - Gear Set |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs) |
1 x | 25 mm Sandpaper file |
1 x | 25 mm reinforced hinge |
1 x | Copier 2x20 cm pcs |
1 x | Mini-handed clamp |
1 x | Servo FUTABA SBL 471 SV |
1 x | Universal Filter |
1 x | Set brocas Ø 0.4-0.6-0.8-1.0 mm (4 pcs) |
1 x | Servoholder Dymond DS 1800 MG Digital (2 pcs) |
1 x | Large flex hinge (12 uds) |
1 x | Gear for D 200 BX |
1 x | Servo AN-8 HBA |
2 x | Steel brush wheel with 2.35mm |
1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
1 x | Dremel 3000 130W |
1 x | Fresa corte diamante Ø 1.4mm (bola) |
2 x | Fresa corte diamante Ø 2.35mm (lentil) |
2 x | Straightened rod Ø 1.5 mm x 1500 mm |
1 x | Straightened rod Ø 8.0 mm x 1000 mm |
1 x | Straightened rod Ø 2.5 mm x 1000 mm |
1 x | Straightened rod Ø 1.0 mm x 1000 mm |
1 x | Turbina X132 H "Light Version" |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 7 mm |
1 x | Waterproof adhesive tape, width 19mm, length 25m |
1 x | 140 mm rods set for direction control |
2 x | Turbina XICOY X180 light |
2 x | Turbina XICOY X95 compact |
1 x | Telemetria XYCOY adapter |
2 x | Turbina X45 H "Light Version" |
2 x | Turbina XICOY X180 compact |
2 x | Turbina X45 H "compact" |
1 x | Turbina X132 H "Compact Version" |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 5 mm |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm |
1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
1 x | 100 mm rods + T patellas set for direction control |
1 x | SE Ring 250 mm (2 pcs) |
1 x | 90 mm rods + T patellas set for direction control |
1 x | 45 mm rods + T patellas set for direction control |
1 x | 100 mm rods set for direction control |
1 x | Birch plywood plate 600x300x3.0 mm |
1 x | Balsa panel 3.0x100x1000 mm |
1 x | Balsa panel 4.0x100x1000 mm |
1 x | Mahogany wood slat 2.0x2.0x1000 mm |
2 x | Plywood sheet BEECH 600 x 300 x 2,0 mm |
1 x | 50N turbine start protection tube |
1 x | Balsa panel 10x100x1000 mm |
1 x | Lite Plywood panel 600x300x2.0 mm |
1 x | Balsa panel 1.5x100x1000 mm |
2 x | Birch plywood plate 600x300x1.2 mm |
1 x | Linden wood slat 2.0x2.0x1000 mm |
1 x | Mahogany wood slat 3.0x3.0x1000 mm |
1 x | Trailing edge BALSA 35x8x1000 mm |
1 x | A/C quality beech plywood 600x300x6.0 mm |
1 x | Beech dowels 10 mm x 1000 mm |
1 x | Birch plywood plate 600x300x4.0 mm |
1 x | Birch plywood plate 600x300x2.0 mm |
1 x | Nylon hinge 15x0,3 (10 pcs) |
1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
1 x | Socket Head Screw M2x12 |
1 x | silverlot 45% - 1,50x500 mm solder rods (2 pcs) |
1 x | Sub-D Plug Mold |
1 x | Roller cutter 28 mm |
2 x | Aramid fibre shears Proton®, 21 cm / 8" length |
1 x | ALU double servo arm 3 mm shaft |
1 x | Servo GO-1070MG 40 kg.cm 0.10s/60º |
1 x | A/C economy plywood 600x300x6+.0 mm |
1 x | Spinner Alumin. propeller pleg. 30 mm / 4,0 mm |
1 x | Servo JETI DSHV 3D13T (13 Kg) |
1 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
1 x | 100g Flux Paste for Silver Solder |
1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
1 x | Vinyl Gloves IDEAL LIGHT, size M , box/ 100 pcs |
1 x | Boxed KIT OF 7 Rotary Burrs FINE |
1 x | Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs) |
1 x | Servo GO-1017MG 4.5 kg.cm 0.10s/60º |
1 x | Welder 100W/200V |
1 x | 23x8 BIELA propeller |
1 x | 18x10 BIELA propeller |
1 x | 23x10 BIELA propeller |
1 x | 20x10 BIELA propeller (3-blades) |
1 x | 24x10 4Bl Scale |
1 x | 26x12D BIELA 3Bl propeller (3-blades) |
1 x | 17x10 BIELA propeller SCALE (3-blades) |
1 x | Turbine RABBIT 100 SE 11 Kg |
1 x | Short adjustable control horn 3x24 |
1 x | Horn mando small (2 pcs) |
1 x | Cianocrilato MD GEL 454 tube 20g |
1 x | 24x12 BIELA 3Bl propeller (3-blades) |
1 x | 21x12D BIELA propeller (3-blades) |
1 x | Ciano KAVAN Thin 20g |
1 x | EDF Stream-Fan 110mm kv780 |
1 x | 22x12D BIELA 3Bl propeller (3-blades) |
1 x | 18x10 BIELA 3Bl propeller (3-blades) |
1 x | 18x8 BIELA 3Bl propeller (3-blades) |
1 x | 20x10 BIELA propeller (4-blades) Corsair Scale |
1 x | BIELA 19x7 WILGA Propellers |
1 x | EDF Jet-Flex 80 - 8 kg |
1 x | Colador RABBIT |
1 x | Turbine HORNET 85 SE |
1 x | DUPLEX 2.4EX MU 3 Sensor |
1 x | Horn DU-BRO 1/2 (2 pcs) |
1 x | Turbina KINGTECH K320 G5 |
1 x | CA Glue (medium) 20g |
1 x | 19x10 BIELA propeller (3-blades) |
1 x | 26x18 BIELA propeller |
1 x | 24x8 BIELA propeller |
1 x | 18x8 BIELA propeller |
1 x | Metal clevis M2 (10 uds) |
1 x | 25x10 BIELA propeller (3-blades) Corsair Scale |
1 x | 18x6 BIELA propeller |
1 x | 16x8 BIELA propeller (3-blades) |
1 x | KAVAN CA Activator 150ml |
1 x | 17x10 BIELA propeller (3-blades) |
1 x | 25x14 4Bl Scale |
1 x | 26x16D BIELA 3Bl propeller (3-blades) |
1 x | 19x8 BIELA propeller |
1 x | BIELA 25x10 WILGA Propellers |
1 x | 18x10 BIELA propeller SCALE (3-blades) |
1 x | 26x8 BIELA propeller |
1 x | Ciano KAVAN Super Thin 20g |
1 x | 18x10 BIELA pusher propeller |
1 x | KAVAN Threadlocker - Blue 10ml |
1 x | Microbalon filler for CA glues. Packaging bottle 20g |
1 x | 24x10 BIELA Sport 3Bl propeller (3-blades) |
1 x | 26x12 BIELA 3Bl Pusher propeller |
1 x | Ciano KAVAN Medium 20g |
1 x | Turbine DS-51-DIA HST + DSM 4625-1100 + YGE 90HV |
1 x | Telemetry JETI |
1 x | Turbo Prop KS |
1 x | Electric starter BEE (old) |
1 x | Turbine MAMMOTH 25.4 Kg |
1 x | Light System |
1 x | Telemetry SPEKTRUM |
1 x | Turbine CHEETAH 160 SE |
1 x | Short extra-strong control horn with bearing 2,8x15 |
1 x | 6 mm blue aluminium threaded horn with patella |
1 x | 5 mm M2 variable inclined horn |
1 x | Long extra-strong control horn with bearing 2,8x34 |
1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
1 x | Brass control horn M4 short for wire (10pcs) |
1 x | Long horn 50x26 |
1 x | Long adjustable aluminium control horn 2,8x24 |
1 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
1 x | Horn DUBRO 1/2A |
1 x | Brass control horn M3 short for wire (2 pcs) |
1 x | Horn 6/27 with M3 Bearing |
1 x | SlowFlyer control horn (3 pcs) |
1 x | Horn micro type4 Ø 0,5 (2 pcs) |
|
65,619.17EUR |