Top » Catalog » Hardware » Undercarriage » Actuator electric » ER633

89.54EUR

Actuator Electric 25 mm HIGH TORQUE
[ER633]

Actuator Electric 25 mm

Electron Linear Actuator, designed to move the RC planes gear doors. Manufactured in aeronautical aluminium 7075-T6 with CNC machines. All parts are anodized, and manufactured with very small tolerances. The control unit is integrated inside the actuator housing. The result is a very compact and robust system. The innovative installation bracket adjutsable in 3 points, and their small size, allow install this in small places.

Specifications:
Weight: 45g (cable and bracket included)
Voltage Supply: 4.5-8.4V

Thrust:
High reduction: 60N (at 6V), 50N (at 4,5V)
Low reduction: 45N (at 6V), 35N (at 4,5V)

Cycle time (no load):
High reduction: 3,5sec (at 6V), 4,5sec (at 4,5V)
Low reduction: 2,5sec (at 6V), 3,5sec (at 4,5V)

Operation: Can be controlled direct from a receiver, RS-200 or GS-200
Include: Adjustable bracket, Ball link installed.

temporarily out of stock

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
    Accesorios
    Actuator electric
    Brake set
    Electric retracts->
    FEMA Landing gear
    Floats
    Mechanical retracts
    Retractil gear neumatic
    Skys
    Struts
    Tail Landing Gear
    Wheel pants
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Jet Pipe for ULTIMATUM 2m
155.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	XH female balance (5S) connector (2 pcs)
1 x	Connectors banna oro 0,8 mm (M/F)
1 x	Carbon fiber flat 1000x3.0x0.5 mm
1 x	Straightened rod Ø 2.5 mm x 1000 mm
1 x	Conector Servo female 4 pines
1 x	Connectors banna oro 8,0 mm 5 pcs(Female)
1 x	1/12 Pilot "Cougar"
1 x	Brass rod Ø 0.5 mm x 1000 mm
1 x	1/6 Pilot "John"
1 x	Straightened rod Ø 6.0 mm x 1000 mm
1 x	Universal Colour Paste white 50 g
2 x	Foaming agent for epoxy resins 200 g
1 x	Cross Connector 4.0 mm x 1000 mm
1 x	2 mm male connector (2 pcs) with safety connector
1 x	Epoxy 5min KAVAN 2x 100g
1 x	Profile ABS Square 4 x 1000 mm
1 x	Screws flush mount M2
1 x	Oracover Yellow CADMIO 10 m
1 x	Nut M1,6
1 x	Battery plate
1 x	Side Plate
1 x	Head core bushing
1 x	SE Ring 480 mm (2 pcs)
1 x	Rotorhead pushrod
1 x	Actuador lineal HLS12-100210-7.4v
1 x	Rotorshape Elevator
1 x	Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC
1 x	Gates hinge black 30x16 mm (2 pcs)
2 x
1 x	Extractor piñones 2.3/3.2 mm
1 x	Cable Cargador FUTABA
1 x	2,0x50 mm allen screwdriver
1 x	Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
1 x	Epoxy Resin L + Hardener CL (60 min) kit/ 930 g
1 x	Horn 5/10 with M2 Bearing
1 x	Silicone 0,50 qmm servos wire Graupner(5 m)
1 x	Threaded coupler ALU M3 Ø 6 (2 uds)
1 x	Dust collector for mould cleaning
1 x	Hexagonal ball head 2.0 x 50 mm
1 x	Starter Sullivan-STAR 601
1 x	67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Hysol Mixing Caps SET with 10
1 x	PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m)
1 x	Silicone 0,25 qmm servos wire Graupner (100 m)
1 x	Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE
1 x	67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x	TP/TopFuel - XH 2/3S Adapter
1 x	Adapter lead MPX/EC3
1 x	Green silicone 0,25 qmm wire (50 m)
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs)
1 x	Silicone red 0,25 mm² wire (25 m)
1 x	Vacuum pump 12 CFM
1 x	Cierre cabina aluminio Ø4, I=10 mm
1 x	Threaded coupler ALU M3 Ø 5 (2 uds)
1 x	Starter Sullivan-STAR 603 DINATRON
1 x	Steering arm 12 mm Ø 3 mm (2 uds)
1 x	Premium servo extension 25cm
1 x	silicon 100 cm Futaba Extension Ø 0,35 mm
1 x	Truck-trailer for gliders 720 x 285 mm
1 x	Brass rod Ø 1.0 mm x 1000 mm
1 x	Profile ABS Square 3 x 1000 mm
1 x	Streamline Stainless Steel Tubing 10.5x5.7x1000 m
1 x	Paint gun for sprays
1 x	ABS angle 3,0x3,0x1000 mm
1 x	Release wax 250ml
1 x	Streamline Stainless Steel Tubing 9.0x5.0x1000 mm
1 x	Straightened rod Ø 1.0 mm x 1000 mm
1 x	Conector AS150 7mm antichispazo (Set: 2 pares)
1 x	Piloto Jet "Green" 1/6 Scale
1 x	Conector BEC male (10 pcs)
1 x	Monokote BLANCO jet (1.8x0.65m)
1 x	Ball joint long
1 x	Wheel keeper washer
1 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Waterproof adhesive tape, width 19mm, length 25m
1 x	Head runner
1 x	SE Ring HACKER 300 mm (2 pcs)
1 x	Foil for sticking flaps and ailerons
1 x	Blades 330mm
1 x	SE Ring 200 mm (2 pcs)
1 x	Long pinned hinge (6 uds)
1 x	Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x	Copier 5x20 cm pcs
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x	Ball Link Plier
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m
1 x	White silicone 0,25 qmm wire (100 m)
1 x	L cockpit anchor "tipe F3A" (2 pcs)
1 x	Epoxy Resin L 285 + Hardener 386, kit/ 675g
1 x	resin-hardener L-385 H-385 (625 g)
1 x	SlowFlyer control horn (3 pcs)
1 x	Epoxy Resin L + Hardener LT kit/ 895g
1 x	Starter EM Gear Power 80
1 x	Pin type hinge Al 3,0x50 mm (2 pcs)
1 x	Crimping sleeves for cable 0.85 mm (10 pcs)
1 x	Brass control horn M3 short for wire (2 pcs)
1 x	Horn 5/20 with M2 Bearing
1 x	Horn 5/15 with M2 Bearing
1 x	Carbon Non-Woven, 160 g/m² 127 cm 1 m
1 x	Screwdriver for Torx® TX6
1 x	LH long black aluminium horn L31xH30 (2pcs)
1 x	Micro flex hinge (12 uds)
1 x	Stainless steel cable Ø 0.62 mm (10 m)
1 x	Steering arm 12 mm Ø 4 mm
1 x	Horn 20x28,5 mm (2 pcs)
1 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	800TVL CMOS camera for FPV
1 x	Epoxy Resin L 285 + Hardener 386, kit/ 3.355 kg
2 x	Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x	48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x	Parachute expulsion foam
1 x	Remote electric ignition system
1 x	Field folding model stand
1 x	Propeller balancer
1 x	Yellow smoke bombs AX-60 (5 pcs)
1 x	Extension lead 15 cm Multiplex
1 x	Green smoke canister 140 g
1 x	3 blades set
1 x	Flat Connector 4.0 mm x 1000 mm
1 x	ABS "T" angle 4.0x4.0x1000 mm
1 x	Connectors banna oro 8,0 mm (Male) 5 pcs.
1 x	Brass hexagonal rod Ø 3 mm x 1000 mm
1 x	Piloto jet 130 mm
1 x	Connectors banna oro 3,5 mm (M/F)
1 x	Painting GHT Lexan Black 150 ml
1 x	ABS "T" angle 8.0x8.0x1000 mm
1 x	Carbon fiber rod 5.0 mmx1000 mm
1 x	Connectors banna oro 4 mm (M/F) (ultralight)
1 x	Brass hexagonal rod Ø 4 mm x 1000 mm
1 x	ABS "T" angle 10.0x10.0x1000 mm
1 x	Pilot "Goose" (Slimline)
1 x	Pilot JAN 1/4 Saiplanes
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x	Carbon fiber rod 1.5 mm x 1000 mm
1 x	L-Connector 1.0 mm x 1000 mm
1 x	Plasti Dip Liquid Tape 429 ml black
1 x	Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x	XH female balance (2S) connector (2 pcs)
1 x	Pilot WWII US Navy Pacific 12" Scale 1/6-1/5
1 x	Streamline Stainless Steel Tubing 11.5x6.5x1000 m
1 x	Carbon fiber flat 1000x3.0x1.0 mm
1 x	Carbon fiber rod 16 mm x 1000 mm
2 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M
1 x	Piloto WWII USAAF 12" Scale 1/6 - 1/5
1 x	Carbon fiber flat 1000x6.0x0.8 mm
1 x	Connectors banna oro 4 mm (M/F)
1 x	TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
1 x	1/6 Pilot "Cindy"
1 x	Connector CAN 15
1 x	Civilian pilot "G-Man" size 9cm (Slimline)
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x	1/10 Pilot "Jimmy"
1 x	Carbon fiber rod 12 mm x 1000 mm
1 x	Carbon fiber rod 20 mmx1000 mm
1 x	1/7 Pilot "Japanese"
2 x	Mixing tube for double syringes and cartridges (MR 1:1 and 2:1)
1 x	Streamline Stainless Steel Tubing 7.5x4.5x1000 mm
1 x	Piloto JET 1:3,5
1 x	1/6 Pilot "Tony"
1 x	Streamline Stainless Steel Tubing 14.5x9.6x1000 mm
1 x	Brass hexagonal rod Ø 5 mm x 1000 mm
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll
1 x	EC5-Set female, simple quality, 2 x female pin, 1 x blue housing
1 x	Connectors banna gold 5,5 mm (M/F)
1 x	Spannlack 1000 ml
1 x	Hobbylite Filler, Balsa colour
1 x	Digital scale up to 40 kg
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
1 x	Carbon fiber rod 14 mmx1000 mm
1 x	Washer 2.2×4
1 x	Baering 3x8x4
1 x	Oracover White 2 m
1 x	Tail boom
1 x	Oracover Orange 2 m
1 x	SE Ring 360 mm (2 pcs)
1 x	Ply-Span 450x600/13g White
1 x	Raer wall
1 x	Nut M2 securing
1 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x	Bearing housing
1 x	Ply-Span 450x600/13g Orange
1 x	Side rudder
1 x	Oracover light Grey 2m
1 x	SE Ring 450 mm (2 pcs)
1 x	Papel japones 12 grs/m2 760x510 mm JAPICO
1 x	Oracover Black 2 m
1 x	Head core
1 x	Spikes Band (5 m)
1 x	Monokote BLUE metalizado (1.8x0.65m)
1 x	SE Ring 240 mm (2 pcs)
1 x	Blade holder center
1 x
1 x	Rotor Mast
1 x	Bearing 3x6x2,5
1 x	ORACOVER Fluor red (2 m)
1 x	SE Ring 250 mm (2 pcs)
1 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Screw M3x16
1 x	Ring 320 mm length (5 pcs)
1 x	SE Ring 300 mm (2 pcs)
1 x	Oracover Red 2 m
1 x	Monokote ROJO misil (1.8x0.65m)
1 x	Oracover ROYAL RED 2m
1 x	Tape GFK 38 mm
1 x	Steering lever
1 x	Oracover Yellow CUB 10 m
1 x	Oracover GREY Seafire Sea 2m
1 x	Ply-Span 450x600/13g Blue
1 x	Grub screw M3x3 shouldered (2 pcs)
1 x	Oracover Yellow CUB 2 m
1 x	Oratex Natural White 2m
1 x	Oratex Natural White 20m
1 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Servo Fork
1 x	Screws M1,6x6 Allen
1 x	Oratex Red Fokker 10 m
1 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	ORACOVER transparent Yellow (10 m)
1 x	Oracover Azul Cielo 2 m
1 x	Blade holder upper
1 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	Tape GFK 50 mm
1 x	ORACOVER Ferrari red (2 m)
1 x	Tail support (2 pcs)
1 x	Epoxy Casting Resin + Hardener "water-clear" (300 min)
1 x	Nylon hinge 20x15x0,3 (10 pcs)
1 x	Epoxy Resin L + Hardener L (40 min) 240g (200g Resin L + 40g Har
1 x	Small aluminium horn gold (2pcs)
1 x	Fast'n EZ-CA-Hinge, lite (12 uds)
1 x	PVC 0,08 qmm Futaba servos wire (5 m)
1 x	Nylon hinge 20x20x0,3 (10 pcs)
1 x	6 mm red aluminium threaded horn with patella
1 x	Epoxy FINISH-CURE™ 20 min (130g)
1 x	Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x	PPM Encoder Module
1 x	Horn 13,5x16 mm (2 pcs)
1 x	Carbon Non-Woven, 160 g/m² 127 cm 5m
1 x	Epoxy QUIK-CURE™ 5 min (130g)
1 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x	Crimping sleeves for cable 0.70 mm (10 pcs)
1 x	33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	3,0x60 mm allen screwdriver
1 x	JR silicone servo wire 0,35 qmm / 5m
1 x	Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x	Epoxy Resin HT 2 + Hardener HT 2 (60 min) 1 kg
1 x	Futaba External voltage input cable Futaba CA-RVIN-700
1 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x	MPX-Dean "T" Adapter
1 x	Alignment dowels (2 parts, outer-Ø 8 mm) bag/ 100 pairs
1 x	Adhesive epoxy structures RESOLTECH 3350 (1 kg)
1 x	Fibra carbono 3k tela 160g/m2 100 cm x 5m
1 x	Epoxy Resin L 285 + Hardener 386, kit/ 1.35 kg
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x	50m servo "Premium" wire (white/red/blue)
1 x	Epoxy 40 min (Resin). 5 Kg
1 x	Digital Air Speed Sensor And Pitot Tube Set
1 x	Pin type hinge Al 4,5x70 mm to wire (2 pcs)
1 x	Ferrita con funda
1 x	Pin type hinge Al 4,5x70 mm (2 pcs)
1 x	Epoxy 30 min. 200g

8,421.95EUR