630.00EUR

DRACO 2.0m PNP
[EFL12575]


DRACO 2.0m PNP

Product Details
DESCRIPTION
As absolute RC fanatics, we at Aerobertics are delighted with this new model from E-Flite, the DRACO. Besides being an absolute eye-catcher on the field with its incredible scale-details, it also promises to fly fantastic, with amazing STOL capabilities. With decades of RC experience and as one of the most important dealers of Horizon Hobby in Europe, you are at the right place at Aerobertics. Always welcome in our 800m² shop or order through our webshop!
The ultimate bush plane for an unmatched stol and beyond flying experience
The Extra Scale DRACO 2.0m is one of the most detailed and feature-rich E-flite® aircraft to date, and the only officially-licensed model of Mike Patey’s ultimate bush plane. It excels at STOL and scale-like flying — and looks amazing while doing both!
Absolutely One Of A Kind
Inspired by the incredible ingenuity and effort Mike Patey put into building the full-sized airwcraft, E-flite® offers the only officially-licensed scale replica of the ultimate bush plane! The amazing DRACO 2.0m is one of the most highly-engineered, detailed and feature-rich RC models ever produced. Beyond its complex design and the accurate shape of its fully-molded, lightweight and durable EPO airframe with a factory-applied finish, it also features an abundance of Extra Scale details including a variety of surface features, steps, antennas, wingtip “stinger” skids, and much more.
Smart Technology
The NX8 offers 10 programmable mixes, 2 sequencers, and up to 10. The exclusive Spektrum™ Avian™ Smart ESC provides a variety of real-time power system related telemetry data including motor RPM, current draw, overall flight battery voltage and more via compatible receivers (including the AR637TA installed in the BNF® Basic version) and Spektrum AirWare™ equipped transmitters (including the DX6e and 8e, DX6 G2/G3 and 8 G2, the DX9, the NX6, 8 and 10, the iX12, iX20 and others) while you fly. It will even show individual cell voltages, temperature of the flight pack and other data when using Spektrum Smart LiPo batteries. Plus, optional-use motor reversing offers special ground handling and other capabilities (compatible Smart receiver and 7+ channel transmitter required for reversing).
Versatile Power System
The factory-installed Spektrum™ Avian™ 100-amp Smart ESC and high-power brushless outrunner motor can drive the large-diameter four-blade propeller with a wide range of batteries. Install a 4S battery for slow and smooth scale flying, a 5S battery for added power, or a 6S battery to deliver better-than-scale vertical performance. Best of all you can install a 4000mAh battery to keep the weight and wing loading down, a 5000mAh battery for a great balance of performance and handling, or up to a 7000mAh battery to achieve long flight times up to 10-15+ minutes.
LED Lights
There are a total of 17 LEDs throughout the airframe to simulate navigation, landing, down, tail beacon, reversing and other lights. They’re connected to a custom light controller with different settings you can control from the transmitter to choose which lights turn on and off with various functions, glow solid, strobe and more.
Capable Gear
Like the full-scale DRACO, the articulated and shock-absorbing main gear is equipped with oversized, tundra-style tires to soak up the bumps of rough surfaces and provide excellent prop clearance. It’s also custom-made from fully-molded carbon fiber to handle short takeoffs from and landings on a variety of surfaces. The shockequipped and steerable tailwheel offers excellent ground handling, whether moving forward or when utilizing the optional-use motor reversing to taxi backward too.
Added Convenience
The two-piece wing is secured with unique, quarter-turn thumbscrews so no tools are required for field assembly/disassembly, and along with the V2 hands-free servo connection system, makes storage and transport as easy and convenient as possible. Best of all, you can have the DRACO 2.0m ready to fly in less time than it takes to charge a battery!
Factory Finished
The factory-applied paint and decal finish saves you time and makes for a scale replica you’ll be proud to show off everywhere you go.
Plug-N-Play® Completion Level
This Plug-N-Play® (PNP) version comes out of the box with a factory-installed power system and servos that are ready to connect to the compatible receiver of your choice (sold separately), plus the transmitter and battery you provide (also sold separately). Simply install the receiver, finish any final assembly, and fly!
Needed to Complete
Full-range 6-8+ channel Spektrum™ DSMX®/DSM2® compatible transmitter & receiver
4S 14.8V to 6S 22.2V 4000–7000mAh LiPo with EC5™ or IC5® Connector (We recommend Spektrum Smart G2 batteries)
Compatible LiPo charger (We recommend Spektrum Smart G2 Chargers)
Lipo Safety Bag
Lipo Tester

FEATURES
One of the most highly-engineered, detailed and feature-rich E-flite® aircraft to date
The only officially-licensed scale replica of the one-of-a-kind DRACO by Mike Patey
Extra Scale details including an abundance of molded-in surface features, steps, antennas, wingtip skids, and much more
Functional Extra Scale features including licensed KING shocks on the main gear and tail wheel, leading-edge slats, slotted flaps, and more
17 total LEDs including navigation, landing, down, tail beacon, reversing and other lights with adjustable light controller

Wingspan: 77.7" (1974 mm)
Product Length: 53" (1346 mm)
Product Weight : 4535 g with 6S 5000mAh 30C battery; 3855 g without battery
Flaps: Yes
Power Type: Electric
Material: EPO
Minimum Required Radio: 6-channel
Motor Type: Brushless
Propeller Size: 14.5 x 9 4-blade
Receiver: Not included
Recommended Motor Battery: 4S 14.8V to 6S 22.2V 4000-7000mAh LiPo (sold separately)


temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Oracover Azul 2 m
1 x Round Rod 5,0x1000 mm
1 x Oracover CARBON Metalic 1 m
2 x 2,4x1000 mm 2:1 green termoretract tube
1 x Strip 3,5x1,75x330 mm
3 x 1,2x1000 mm 2:1 black termoretract tube
2 x 135 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x Truck-trailer for gliders 720 x 239 mm
1 x ABS Strip 1.5x2.0x1000 mm
1 x ABS Strip 1.5x3.0x1000 mm
1 x 1,6x1000 mm 2:1 black termoretract tube
1 x Oracover Black 2 m
1 x ABS I Strip 10x5x1000 mm
1 x 1,6x1000 mm 2:1 red termoretract tube
2 x Monokote PLATINO metalizado (1.8x0.65m)
1 x 37 mm PVC transparent battery termo-retract (1 m)
2 x 12,7x1000 mm 2:1 green termoretract tube
1 x Strip ABS 2.0x10.0x1000 mm
1 x ABS Strip 1.0x3.0x1000 mm
1 x Angle measurer
1 x ABS I Strip 20x10x1000 mm
1 x Surface Indicator Gauge Small
1 x Strip ABS 2.0x3.0x1000 mm
1 x 6,4x1000 mm 2:1 blue termoretract tube
2 x Xplorer2 anemometro
1 x Xplorer3 anemometro
2 x 19 mm 2:1 black termoretract tube
1 x 6,4x1000 mm 2:1 green termoretract tube
2 x MYLAR film A350 (1000x500 mm)
1 x Oracover Azul Cielo 2 m
1 x ABS Strip 1.0x5.0x1000 mm
1 x Field folding model stand
2 x 58 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x Strip ABS 2.0x5.0x1000 mm
1 x 68 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x Round Rod 1,0x1000 mm
1 x Round Rod 1,5x1000 mm
1 x 1,2x1000 mm 2:1 red termoretract tube
1 x ORACOVER Ferrari red (2 m)
1 x 4,8x1000 mm 2:1 black termoretract tube
1 x 3,2x1000 mm 2:1 black termoretract tube
1 x Propeller balancer
1 x 4,8x1000 mm 2:1 red termoretract tube
1 x Round Rod 4,0x1000 mm
1 x Round Rod 6,0x1000 mm
2 x ORACOVER Fluor red (2 m)
1 x Truck-trailer for gliders 720 x 285 mm
2 x Medidor ángulos y/o incidencias
1 x Strip 2,5x1,25x330 mm
1 x Round Rod 1,25x1000 mm
1 x ABS Strip 1.0x2.0x1000 mm
1 x Angle of incidence meter
1 x Strip 2,0x2,0x330 mm
2 x 105 mm PVC transparent battery termo-retract 68 mm (1 m)
2 x 165 mm PVC transparent battery termo-retract 165 mm (10 m)
2 x 2,4x1000 mm 2:1 black termoretract tube
2 x Field folding model stand SebArt
1 x 12.7 mm 2:1 black termoretract tube
2 x 165 mm PVC transparent battery termo-retract 165 mm (1 m)
1 x ABS Strip 1.5x8.0x1000 mm
1 x Round Rod 3,0x1000 mm
1 x Aluminium wide washer M3 red (4 pcs)
1 x Circlik for shaft 1.2 mm (10 pcs)
1 x Vasa model Catapult
1 x Flat washer 1.7 mm (20 pcs)
1 x Spring lock washer 2.1 mm (20 pcs)
1 x Spring lock washer 4.1 mm (20 pcs)
1 x Spring lock washer 3.1 mm (20 pcs)
1 x Aluminium cap bolt washer M3 black (8 pcs)
1 x Quicklock washer 2 mm (10 pcs)
2 x Flat washer 2.2 mm (20 pcs)
1 x Aluminium wide washer M3 gold (4 pcs)
3 x Aluminium wide washer M4 Gold (4 pcs)
1 x Circlik for shaft 1.9 mm (10 pcs)
1 x Bungee HLG Premium
1 x M3-M4 rubber washer (8 pcs)
1 x Lock washer 3.2 mm (20 pcs)
1 x Flat washer 3.2 mm (20 pcs)
3 x USB Interface Adapter
1 x Quicklock washer 1.5 mm (10 pcs)
1 x Quicklock washer 4 mm (10 pcs)
1 x Lock washer 4.3 mm (20 pcs)
1 x Circlik for shaft 2.3 mm (10 pcs)
1 x Flat washer 2.7 mm (20 uds)pcs)
1 x Aluminium wide washer M3 blue (4 pcs)
1 x Quicklock washer 3.5 mm (10 pcs)
1 x Aluminium wide washer M4 Blue (4 pcs)
2 x Circlik for shaft 1.5 mm (10 pcs)
1 x Aluminium wide washer M4 Red (4 pcs)
1 x M3 black washers (4 pcs)
1 x Flat washer 4.3 mm (20 pcs)
1 x Aluminium cap bolt washer M3 blue (8 pcs)
1 x Lock washer 2.2 mm (20 pcs)
2 x Aluminium cap bolt washer M3 red (8 pcs)
2 x 2 mm female connector (2 pcs) with safety connector
1 x Connector CAN 15
1 x XH female balance (4S) connector (2 pcs)
2 x Resistor 3W 5% OR47
3 x Connectors DEANS (T)
1 x Conector Servo female 4 pines
1 x EC5-Set female, simple quality, 2 x female pin, 1 x blue housing
1 x Gold antispark 5,5 mm plug
1 x Connectors banna oro 2 mm (M/F) (ultralight)
1 x 30 cm DEANS female connector
2 x XH male balance (5S) connector (2 pcs)
1 x Heat sink for Optotronix LEDs
1 x Banna gold connector 2,5 mm (100 M/F pairs)
1 x Optotronix Aurora Plug
1 x Conector AS150 7mm antichispazo (Set: 2 pares)
1 x Gold antispark 4 mm plug
1 x XH male balance (3S) connector (2 pcs)
1 x Monokote ROJO misil (1.8x0.65m)
1 x Papel japones 12 grs/m2 760x510 mm JAPICO
1 x Oracover White 10 m
2 x Oracover Brown 2 m
1 x Monokote BLANCO jet (1.8x0.65m)
1 x Ply-Span 450x600/13g Orange
1 x PROFICOVER 5m
1 x Oracover ROYAL RED 2m
3 x Monokote BLUE metalizado (1.8x0.65m)
1 x Oratex Natural White 2m
1 x Oratex Natural White 20m
1 x Ply-Span 450x600/13g White
1 x Oracover Verde 2 m
1 x Steering arm 12 mm Ø 3 mm (2 uds)
1 x Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x Screw-lock connector Ø 2 mm (2 uds)
1 x Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
1 x Oracover CHROME 2m
1 x Electric spoiler 250 mm (2 pcs)
1 x Screw-lock connector M2 (2 uds)
1 x 4,8x1000 mm 2:1 blue termoretract tube
1 x Covered closure or fairings
1 x Strip ABS 2.0x8.0x1000 mm
1 x Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC
1 x Mahogany wood slat 2.0x2.0x1000 mm
1 x 100m servo "Premium" wire (white/red/blue)
1 x ABS tube 5.0x4.0x1000 mm
1 x ABS tube 10.0x8.0x1000 mm
1 x Oracover light Grey 2m
1 x Couple M4 for wire (10 pcs)
1 x Brass hexagonal rod Ø 4 mm x 1000 mm
1 x Ball Link Plier
1 x 
1 x Hexagonal ball head 2.0 x 50 mm
1 x Screwdriver for Hexagon 1,5mm
1 x Socket Screw M2x3 mm (4 pcs)
1 x Tapping Screw M2.2x9.5 (10 pcs)
1 x Nut for mounting M5 (4 pcs)
1 x Nut for mounting M2 (4 pcs)
1 x Screw KB 1.4x6 mm (10 pcs)
1 x Blind nut M8 (10 pcs)
1 x Aluminium cap bolt washer M4 green (8 pcs)
2 x Carbon plate 350x150x3.0 mm
1 x Protector Connector MPX (1 pair)
1 x MPX screwable clips (4 pcs)
1 x Connectors MPX black female
1 x Connectors banna oro 2 mm (M/F)
1 x Connectors banna oro 4 mm (M/F)
2 x Connectors MPX 8 pins with support (black) 1 pair (male-female)
1 x XH male balance (8S) connector (2 pcs)
1 x XH male balance (6S) connector (2 pcs)
1 x DRACO 2.0m Helice 14.5x9 4-Blade
1 x Connectors MPX black male
1 x Wing conexion 2 servos Futaba 50 cm
1 x Connectors DEANS (T) micro
1 x EC5-Set male, simple quality, 2 x female pin, 1 x blue housing
1 x Mounting frame MPX male connector
1 x PVC blue transparent battery termo-retract 95 mm (1 m)
1 x Aluminium cap bolt washer M4 blue (8 pcs)
1 x Aluminium cap bolt washer M4 red (8 pcs)
1 x PVC lilac battery termo-retract 70 mm (10 m)
1 x Ply-Span 450x600/13g Red
1 x SIG Coverall 1.2x4.5 m
1 x PVC transparent battery termo-retract 70 mm (10 m)
1 x PVC yellow transparent battery termo-retract 69 mm (10 m)
1 x PYRO 750-50L Competition
1 x PYRO 650-103 Long Axi
1 x Spinner fixed propeller 60 mm / 5,0 mm
2 x PYRO 600-11
1 x KIRA 480-38 5,2:1
1 x Falcon Carbon Spinner 82mm for electric motor
1 x Motor ORBIT 20-12 with coolingfan
1 x Spinner INO 75 mm Chrome (Imitacion metal)
1 x Spinner Alumin. fixed propeller 45 mm / 6,0 mm
2 x Spinner INOVA 102 mm Black
1 x Motor brushless 1806 - 2300 Kv Cuadracopter
1 x Spinner Alumin. fixed propeller 30 mm / 3,0 mm
1 x 57 mm INO spinner (carbon imitation)
1 x Powerset FunJet 2 with Vectorcontrol unit
1 x 82 mm 12 mm axi 30 g F3A CF drilled spinner 3BL
1 x KIRA 480-43 5,2:1
1 x 70 mm INO spinner (carbon imitation)
1 x Spinner NUT M6
2 x KIRA 500-36 6,7:1
1 x SERVO DES 707 BB MG
1 x LA500 rotor head core
1 x LA500 housing-lower cyclic
2 x LA500 freewheel bearing
2 x Pilot LA 500
1 x LA500 pilot-seat set
1 x LA500 nose
2 x LA500 pre-rotation gear hub
1 x LA500 rotor head shaft
1 x Horn 20x28,5 mm (2 pcs)
1 x Brass control horn M3 short for wire (2 pcs)
1 x Horn 5/20 with M2 Bearing
1 x Horn 6/20 with M3 Bearing
1 x Threaded coupler ALU M2 Ø 4 (2 uds)
1 x Brass control horn M2 short for wire (2 pcs)
1 x Spinner INO 70 mm Chrome (Imitacion metal)
2 x Spinner INO 51 mm Chrome (Imitacion metal)
2 x Radial mount for electric 2.5-5.6
1 x KIRA 600-16
1 x KIRA 480-34 5,2:1
2 x KIRA 600-20
1 x 63 mm INO spinner (carbon imitation)
1 x Spinner Alumin. fixed propeller 30 mm / 3,2 mm
1 x Spinner NUT M5
1 x 82 mm INO spinner (carbon imitation)
1 x Spinner Alumin. fixed propeller 30 mm / 2,3 mm
1 x F3A carbon 75 mm spinner for Hacker C-50
1 x Spinner INO 82 mm Chrome (Imitacion metal)
2 x KIRA 480-38
1 x 75 mm INO spinner (carbon imitation)
3 x KIRA 600-38 6,7:1
1 x KIRA 480-34
1 x PYRO 800-48 Long Axi
1 x Nut for 515/518/519 spinner special for Hacker
1 x Spinner NUT M4
1 x 57 mm white plastic spinner for fixed propeller / 4,0 mm axi
1 x Spinner fixed propeller 42 mm / 5,0 mm
1 x Aluminium sheet 500x250x0,5mm
1 x POLARON EX 800w charger
1 x Me-163
1 x Black smoke bombs AX-60 (5 pcs)
1 x DC-3 Douglas (DAKOTA) 1800 mm Electric LG
1 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x SkyMaxx 1.550 mm (kit)
1 x PARAGON Trainer 46-55 1580 mm
1 x 2,4x1000 mm 2:1 red termoretract tube
1 x DRACO 2.0m PNP
1 x ABS "T" angle 2.0x2.0x1000 mm
1 x L-Connector 4.0 mm x 1000 mm
1 x Profile ABS half cane 7.0x1000 mm
2 x Profile ABS half cane 2.5x1000 mm
1 x L-Connector 1.0 mm x 1000 mm
1 x ABS "T" angle 8.0x8.0x1000 mm
2 x ABS angle 1.5x1.5x1000 mm
1 x Streamline Stainless Steel Tubing 10.5x5.7x1000 m
2 x Cross Connector 4.0 mm x 1000 mm
2 x ABS rectangular profile 12x6.0x1000 mm
1 x Flat Connector 4.0 mm x 1000 mm
1 x ABS "T" angle 10.0x10.0x1000 mm
1 x Profile ABS triangular 4.0x1000 mm 90º
1 x Rubber profile 6-2 mm 2M
1 x Profile ABS triangular 4.0x1000 mm 60º
1 x ABS angle 3,0x3,0x1000 mm
1 x L-Connector 1.5 mm x 1000 mm
1 x Profile ABS half cane 6.0x1000 mm
1 x Profile ABS triangular 6.0x1000 mm 90º
2 x Profile ABS Square 4 x 1000 mm
1 x Profile ABS half cane 8.0x1000 mm
2 x Profile ABS triangular 2.0x1000 mm 90º
2 x ABS "T" angle 6.0x6.0x1000 mm
1 x Profile ABS Square 3 x 1000 mm
1 x Rubber profile 8-2 mm 2M
1 x ABS "T" angle 4.0x4.0x1000 mm
1 x Profile ABS half cane 2.0x1000 mm
2 x ABS angle 2,0x2,0x1000 mm
1 x Rubber profile 10-2 mm 2M
1 x Profile ABS half cane 5.0x1000 mm
1 x Profile ABS half cane 4x1000 mm
1 x Profile ABS Square 1 x 1000 mm
1 x ABS rectangular profile 10x5.0x1000 mm
1 x LightBox SR
1 x Propeller electric carbon 10.5x8
1 x Tapping Screw M2.9x9.5 (10 pcs)
2 x Pan Head Screw M1,6x6 (10 pcs)
1 x Socket Head Screw M2x12
1 x Conector MT-60 (pair)
1 x Conector FUTABA Servo male BLUE silicon (10 pcs)
1 x Connectors MPX female
1 x MPX Support (2 pcs)
2 x Propeller POWER-PROP 7x7
1 x PROPELLER ELECTRIC glass 9,5x6
1 x Propeller POWER-PROP 13x8
1 x Propeller electric carbon 9.5x7
1 x Propeller electric carbon 10x7
1 x Propeller POWER-PROP 13x10
1 x Propeller electric carbon 6x5
1 x Propeller electric carbon 10x6
1 x Screw M3x5 (10 pcs)
1 x Tapping Screw M2.9x13 (10 pcs)
1 x Propeller FIALA 15x8 3-Blade
1 x Socket Head Screw M2x8
1 x Conector JR/Uni Servo female BLUE silicon (10 pcs)
1 x Conector JR Servo male (50 pcs)
1 x Conector FUTABA Servo female (10 pcs)
1 x Conector JR Servo female (10 pcs)
1 x Conector FUTABA Servo male (10 pcs)
1 x Floating M4 washer pad (36 pcs)
1 x Screw M4x12 (10 pcs)
1 x KIRA 600-30 6,7:1
1 x Spinner Alumin. fixed propeller 50 mm / 3,2 mm
1 x PYRO 750-50L
1 x KIRA 600-24 6,7:1
1 x Piston ring for DA-60 and DA-120
1 x LA500 housing-upper cyclic
2 x Baal link 4/14/4 (5 pcs)
1 x Propeller APC 14x8.5 Electric Pusher
1 x Transmitter Crystal 35 Mc/s Ch 62
1 x Beech dowels 4.0 x 1000 mm
1 x Connectors MPX female (PIN double)
1 x Connectors MPX 8 pins (green) 1 pair (male-female)
1 x Connectors MPX male (PIN double)
1 x MPX PCB "6 Pins", 5 pieces
1 x Magnetic Connect locking system
1 x MPX housing with flange (4 pcs)
1 x 15 mm floating pad (30 pcs)
1 x KIRA 500-30 6,7:1
2 x KIRA FAI 5F5/4s
1 x KIRA 400-34
1 x PYRO 800-40 Long Axi
1 x 102 mm INO spinner (carbon imitation)
1 x F3A carbon 80 mm spinner for Spark EVO
1 x Spinner Alumin. fixed propeller 45 mm / 3,2 mm
1 x Cono NUT 5/16"x 24 -M4
1 x Miniature brass strap hinge, 1 m
1 x 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x Piston ring for ZG 20 and G240RC
2 x LA500 front gear holder
1 x LA500 ciclic lever
2 x LA500 pre-rotation gear
1 x Motor rotor LA-500
1 x Piñon motor rotor LA-500
1 x Axi for MVVS 3.5 Sport
1 x Receiver replacement antenna, approx. 85
1 x Straightened rod Ø 5.5 mm x 1000 mm
1 x Propeller hub spacer 8/5.5
1 x Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x Brass rod Ø 1.0 mm x 1000 mm
1 x Air Intake manifold 90° - Large
1 x Carburator joints for SAITO FA80/80GK/72/72GK
1 x COMFORT MOUNT ø 25 mm
1 x Spinner propeller pleg. 40 mm / 3,2 mm
1 x Spinner Alumin. propeller pleg. 30 mm / 2,3 mm
1 x AXI 2808/20 V2 Long
1 x Spinner propeller pleg. 40 mm / 5,0 mm
1 x Motor DLE 55 cc
1 x Escape DLE-60 Dcha
1 x Dia. 25x5 mm tefon tube for escape
1 x Crankshaft bearing middle for DA-85, DA-100, DA-100L, DA-150, DA
1 x Motor EME 70 cc with autostarter
2 x Streamline Stainless Steel Tubing 14.5x9.6x1000 mm
1 x Streamline Stainless Steel Tubing 7.5x4.5x1000 mm
1 x METEOR 1.000 mm kit
1 x 16x8 BIELA propeller (3-blades)
1 x 50cm Flexible Stainless Steel Exhaust Tubing D=25mm
1 x Canister combo DLE 111 cc
1 x Spinner propeller pleg. 40 mm / 4,0 mm
1 x AXI 2820/14 V2 Long
1 x Spinner propeller pleg. 30mm axle 3,0 mm
1 x Spinner propeller pleg. 40 mm / 3,0 mm
1 x Spinner Alumin. propeller pleg. 40 mm / 5,0 mm
1 x ABS angle 10,0x10,0x1000 mm
1 x AXI 2814/16 V2 Long
1 x PH6 adapter for 6mm M10 AXI for AXI41xx
1 x VM 2020/20 rear
1 x Cylinder head, left for VM 170/210
1 x Flex-headers for Valach VM 85B2-FS
1 x VALACH Motor VM R5-250 cc
1 x Diaphragm Set Walbro 116/152cc
1 x Gearwheel 9724/09 for ZG 45
1 x Carburetor DLE 170
1 x Gasket, insulator ZG 20
1 x DA-50 Carburator
1 x DLE 85 / DLE111 / DLE120 Prop Washer
1 x 7-Cylinder 35cc 4-Stroke Glow Radial Engine
1 x Motor EME 70 cc
1 x Streamline Stainless Steel Tubing 17.8x12.4x1000 mm
1 x AXI Cooler 41xx
1 x Jodel D.9 BeBe 2.400 mm Kit
24,332.02EUR
Manufacturers
Manufacturer Info
E-Flite
E-Flite Homepage
Other products
Languages
Español English
Currencies