Top » Catalog » Hardware » BEC/Cables/Conectors/Interruptor » EMCA17051

40.20EUR

MPS Gas-Cap-Powerswitch
[EMCA17051]

MPS Gas-Cap-Powerswitch (MPS = Magnetic Power Switch)

- Nicely shaped electronically power switch in Gas-Cap design for receiver sets, ignitions etc.
- The show stopper: turning On/Off is done with external magnet
- An inserted magnet means consumer is off, removing it turns it on ("remove before flight")
- The magnetically actuator is automatically tightened in its " Gas-Cap" by means of magnetically force
- The operating system is indicated by a bright shining blue ring
- Absolutely fail safe system concept due to a combination of Reed-Contact and Hall-Sensor
- The perfect switch - no ugly holes in the fuselage!
- Input voltage 6.0V ... 12.6V (up to 3S LiPo!)
- Continuous current 5A, peak current 20A
- Version including Robbe/Futaba connector (input and output)
- Highly flexible silicone strand with 0.5 mm2 cross section, about 30cm long
- High grade gold plated contacts (FCI)
- Mounting diameter: 15.5 mm, installation depth about 35mm

Delivery includes switching magnet, key ring, stainless steel screws, counter flange and operating instructions

temporarily out of stock

Reviews

Customers who bought this product also purchased

Opto Gas Engine Kill Switch temporarily out of stock	Propeller MENZ-S 17x10 temporarily out of stock	Propeller MENZ-S 18x12 temporarily out of stock
Cylidric hinge 33 mm Ø 2 mm (5 pcs) temporarily out of stock	Cable coupler M3 (10 uds) temporarily out of stock	PWC6 PowerWingConnector for 6 servos with fuselage socket temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Servo GO-1006MG (0.052s/60º, 3.0Kg)
52.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

2 x	WingFix ULTRA Black Edition
1 x	Field folding model stand SebArt
1 x	Surface Indicator Gauge Small
1 x
1 x	Servo NARO Max Std
2 x	Medidor ángulos y/o incidencias
1 x	Field folding model stand
2 x	Angle of incidence meter
2 x	Truck-trailer for gliders 720 x 239 mm
1 x	Brass rod Ø 1.5 mm x 1000 mm
1 x	Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
2 x	1,2x1000 mm 2:1 black termoretract tube
1 x	Support FUEL DOT V3
3 x	Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 2.8 kg
2 x	Mould Resin P 10 kg
2 x	2000A 12V Lithium Jump Starter with 150PSI Air inflator
2 x	Hardener Aero EPH 161 (500 g)
1 x	Propeller balancer
2 x	Angle measurer
1 x	Truck-trailer for gliders 720 x 285 mm
1 x	resin-hardener package L-385 with hardener H-385 (3.5 Kg)
2 x	White gelcoat 1 Kg
1 x	Mould Resin P + Hardener EPH 161-P, kit/ 585 g
2 x	Cotton Flocks, bag/ 500 g
2 x	Propeller balancer
1 x	PowerBox MagSensor red connector
1 x	Power supply NT 40 Amp.
2 x	DIVA cabin cruiser
1 x	Wheel 115 mm with electromagnet and brake disk + E-Brake (2 uds)
1 x	127x43 Ø6.0 mm aluminium core wheel
1 x	Wheel 28 mm
1 x	Wheel Ø 90 mm (1 ud) Electron Retracts
1 x	Wheel FEMA 140 mm / 6 mm
2 x	Ventus 1:4 set of instruments
1 x	Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x	Male connector for 6 pines AWG
1 x	Female connector for 10 pines AWG
1 x	Extension 5 lipos JST/C
1 x	Male connector for 20 pines AWG
1 x	Long Switch On/Off micro
1 x	Wheel FEMA 178 mm / 8 mm
1 x	Wheel FEMA 165 mm / 8 mm
1 x	Wheel FEMA 152 mm / 8 mm
1 x	70x23 Ø3.5 mm aluminium core wheel
1 x	Super Light Wheels(Sponge Tyre) Ø 50mm x 19mm (2pcs) axis Ø 3.5m
1 x	Wheel FEMA 82 mm / 5 mm
1 x	Nose wheel 62 mm
1 x	Super Light Wheels(Sponge Tyre) Ø 55mm x 19mm (2pcs) axis Ø 3.5m
1 x	DUBRO - 102MM / 4" DIA BIG WHEELS (400RV) - 2PCS
1 x	Power Box GPS Sensor III
1 x	PowerBox iGyro 1e
1 x	PowerBox MERCURY SR2
1 x	PowerBox PROFESSIONAL
1 x	PowerBox iGyro SRS
1 x	Liston HAYA 3 x 10 x 1000 mm
1 x	Beech dowels 4.0 x 1000 mm
1 x	Pine wood slat 5.0x5.0x1000 mm
2 x	MEKP Harderner 100 g
2 x	Epoxy Resin L 285 + Hardener 386, kit/ 1.35 kg
1 x	resin-hardener L-385 H-385 (5000 g)
2 x	Epoxy QUIK-CURE™ 5 min (130g)
1 x	Walnut wood slat 1.5x1.5x1000 mm
1 x	BALSA trip 3.0x5.0x1000 mm
1 x	Pine wood slat 2.0x10.0x1000 mm
1 x	Pine wood slat 3.0x5.0x1000 mm
1 x	BALSA trip 8.0x8.0x1000 mm
1 x	Beech dowels 3.0 x 1000 mm
1 x	Pine wood slat 1.5x3.0x1000 mm
1 x	resin-hardener package L-385 with hardener H-385 (875 g)
2 x	Alignment dowels (2 parts, outer-Ø 8 mm) bag/ 100 pairs
1 x	Epoxy Resin HT 2 + Hardener HT 2 (60 min) 1 kg
1 x	Epoxy Resin L 285 + Hardener 386, kit/ 3.355 kg
2 x	Epoxy Resin L + Hardener CL (60 min) kit/ 930 g
2 x	Hardener EPIKURE™ Curing Agent MGS™ LH285, bottle/ 800 g
1 x	Hardener Aero EPH 161 (250 g)
1 x	resin-hardener L-385 H-385 (1250 g)
2 x	Hardener P-25, canister 2.5Kg
2 x	Epoxy Resin L 285 + Hardener 386, kit/ 675g
1 x	Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg
1 x	Epoxy Resin L (2.5 Kg)
1 x	DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x	Epoxy SLOW-CURE™ 30 min (260g)
1 x	Hacker X-Pro USB interface V2
2 x	Epoxy QUIK-CURE™ 5 min (260g)
1 x	JETImodel SINGLE BEC
1 x	Glass Bubbles 0.19 g/cm³ Panda, tin/ 120 g (approx. 1 l)
1 x	EDGE 540-A 105" (2660 mm)
1 x	58 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	6,4x1000 mm 2:1 green termoretract tube
1 x	30 cm BEC cable (male)
1 x	4,8x1000 mm 2:1 black termoretract tube
1 x	Cotton Flocks, bag/ 7 Kg
1 x	ALPHA 1000mm BL ARTR
1 x	2 mm female connector (2 pcs) with safety connector
1 x	2,4x1000 mm 2:1 red termoretract tube
1 x	165 mm PVC transparent battery termo-retract 165 mm (1 m)
1 x	1,2x1000 mm 2:1 red termoretract tube
1 x	3,2x1000 mm 2:1 black termoretract tube
1 x	3,2x1000 mm 2:1 red termoretract tube
1 x	5 LiPo XH>EH adapter
1 x	2 mm male connector (2 pcs) with safety connector
1 x	2,0x50 mm allen screwdriver
1 x	135 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	4,8x1000 mm 2:1 red termoretract tube
1 x	105 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	3,0x60 mm allen screwdriver
1 x	37 mm PVC transparent battery termo-retract (1 m)
1 x	2,5x60 mm allen screwdriver
1 x	22 mm Cut Disc Proxxon/Dremmel
1 x	4,8x1000 mm 2:1 blue termoretract tube
1 x	20 g tin paste
1 x	2,4x1000 mm 2:1 black termoretract tube
1 x	Ball link M1.6 (6 uds)
1 x	2,4x1000 mm 2:1 green termoretract tube
1 x	1,5x50 mm allen screwdriver
1 x	1,6x1000 mm 2:1 black termoretract tube
1 x	Wheel 38 mm V2
1 x	Epoxy FINISH-CURE™ 20 min (130g)
1 x	Epoxy SLOW-CURE™ 30 min (130g)
1 x	Thixotropic agent tin/ 15 g (approx. 350ml)

8,073.12EUR