Top » Catalog » Multicopters » DJI » DJIFPVCOMBO

1,349.00EUR

DJI FPV Combo
[DJIFPVCOMBO]

DJI FPV Drone Combo

Contenido del Packete
1 X DJI FPV Racing Drone
1 X DJI Control Remoto
1 X DJI FPV Goggles V2
8 X Hélices (4XCW 4XCCW)

DJI FPV: The road to amazing adventures in FPV flying is now open, for everyone.
Discover the true meaning of flying, taking to the skies with power, speed and... complete control.
Creating incredible FPV images has never been so accessible.

The most immersive flying experience
With First Person View (FPV) through DJI Goggles V2, you'll experience flying on a different level. You see in Real-Time where you are flying to.

FPV for EVERYONE: 3 different modes
Whether you're a seasoned FPV expert or a complete beginner, 3 different flight modes make the drone suitable for everyone and you'll fly with confidence right from the start.
S Mode: Dynamic mix between the freedom & speed of an FPV drone with simplified controls like familiar DJI drones.
N Mode: Ideal for the (absolute) beginner. Feels like a regular DJI drone.
M Mode: Go all the way, with no limits. The full FPV experience with adjustable parameters. Accelerate faster than sports cars and go from 0-100 in 2s and tear past at up to 140kph.
Videos with cinematic quality & smoothness
Video quality: up to 4K at 60 frames per second. Super Wide View Angle of up to 150°.
120 Mbps bit rate. 1080p up to 120 FPS.
RockSteady Stabilization: EIS technology for extremely stable images, no matter how aggressively you fly.
Images in up to 3840x2160
The world through the DJI Goggles with DJI OcuSync 3.0 video transmission.
The DJI Goggles (glasses) through which you see the live view, receives real-time images at 810p and 120fps, with a high bit rate of 50Mbps. Images are transmitted to the goggles within 28 milliseconds (ms), up to a maximum distance of 10KM!
Small mistake? A moment of panic? No need to panic. The Emergancy Brake and Hover button is your wingman.
With one push of the button, the DJI FPV brakes and hovers in place. No matter which controller or flight mode you use, this button is always available.
Advanced safety features
Rest assured, with Smart Return To Home you can put the drone back down where it took off at the push of a button, fully automatically. (Also Low Battery RTH). Forward and downward sensors detect obstacles, and a downward facing light and colour-adjustable LEDs on the arms keep your drone visible in all conditions.
DJI Motion Control: the new way to control your aircraft
With the optional DJI Motion Control, you can control this drone with simple hand movements, in a natural way. This is not only super innovative, but simply a whole new way of flying. The standard controller enjoys a dynamic design, specially created for FPV.
Easily replaceable parts
Up to 20-min battery life
DJI Fly App
Aerobertics.be is official DJI dealer. The best support & service guaranteed. For all your questions, feel free to contact us or visit our 800m² shop in Bruges, with DJI Showroom or order now in our convenient webshop.
FEATURES
Drone:
Take Off Weight: ca. 795g
Dimensions: 255×312×127 mm (with propellers) / 178×232×127 mm (without propellers)
Diagonal Distance: 245 mm
Max Wind Resistance: 39-49kph

Goggles:
Weight: 420g all included
Dimensions: 184×122×110 mm (antennas excluded) / 202×126×110 mm
(antennas included)
Screen Size: 2-inches (×2)
Screen Refresh Rate: 144 Hz

under request

Reviews

Quick Find

Shopping Cart

1 x	TS832 to Gopro AV/Power Cable
2 x	Ventus 1:4 set of instruments
1 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x	Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x	BALSA triangular 6x6x1000 mm
1 x	Allen wheel collar M4x6
1 x	Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE
1 x	Fresa corte diamante Ø 1.4mm (bola)
2 x	80 mm rods set for direction control
1 x	1 m servo "Premium" wire (white/red/blue)
1 x	Extension silicon 100 cm (Futaba)
1 x	Cabin latch Fox MDM1 4m (pair)
1 x	Extension silicon 10 cm (Futaba)
1 x	Fresa corte diamante Ø 2.35mm (lentil)
1 x	Futaba Female 40 cm extension
1 x	11 mm Rubber pads (14 pcs)
1 x	M3/5Diam metal ball link V3 (2 pcs)
1 x	Cable tie mounts 4.3 (4 uds)
1 x	Boxed KIT OF 7 Rotary Burrs FINE
2 x	Extension S-Bus 1-2 silicon 30 cm FUTABA
1 x	Joint with bearing M2 22x5,5
1 x	Balsa panel 1.0x100x1000 mm
1 x	Extension 30 cm (Futaba)
1 x	Protective Cover for wires Ø 6 mm 1000 mm
2 x	SE Ring HACKER 300 mm (2 pcs)
1 x	Conector BEC female (10 pcs)
2 x	Cable grommet Ø 4 mm (4 uds)
1 x	Copier 5x20 cm pcs
1 x	Futaba Female 40 cm extension
1 x	Support XT60 conector (2 pcs)
1 x	Ball link M3 (10 pcs)
2 x	Cabel "Y" 30 cm (Futaba)
1 x	Extension silicon 75 cm (Graupner)
1 x	Digital precision scale up to 2000 g
1 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	Digital weight, angle and balance meter BASIC
2 x	10m servo "Premium" wire (white/red/blue)
1 x	28x5 mm wires output (2 pcs)
1 x	30 cm BEC cable (female)
1 x	Double conector with JR adapter and 200 mm extension
1 x	M2/M1/6 3Diam long black ball link V1 (6 pcs)
1 x	55% silver electrodes (2 pcs)
1 x	BALSA triangular 10x10x1000 mm
1 x	Extension silicon 35 cm (Futaba)
2 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	3,0x60 mm allen screwdriver
2 x	Recessed MPX connector support (6 pcs)
1 x	Cable silicona macho batt. receptor 30 cm (Futaba)
1 x	Extractor piñones 2.3/3.2 mm
1 x	2 LiPo XH>EH adapter
1 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x	Extension silicon 30 cm female (Graupner)
1 x	Concave-Convex sandpaper file 13 mm
1 x	Cable grommet Ø 5 mm (4 uds)
1 x	Tape GFK 38 mm
1 x	Allen wheel collar M4x4
1 x
1 x	25 mm Sandpaper file
1 x	Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC
1 x	1,5x50 mm allen screwdriver
1 x	Ball link M1.6 (6 uds)
1 x	Support Filtro FESTO
2 x	Blue silicone 0,5 qmm wire (50 m)
1 x	Canopy Lock V1 M3 Red (2 pcs)
1 x	CC 02
2 x	A/C quality beech plywood 600x300x1.5 mm
1 x	Extension silicon 30 cm female (Futaba)
1 x	M2,5 Diam metal short ball link V3 (2 pcs)
1 x	22 mm Cut Disc Proxxon/Dremmel
1 x	4 LiPo XH>EH adapter
1 x	Short ball link M1.6 (6 uds)
1 x	Crimping tool
1 x	Connectors banna oro 4 mm (M/F)
1 x	SE Ring 330 mm (4 pcs)
1 x	Tape GFK 25 mm
1 x	Balsa panel 3.0x100x1000 mm
1 x	M3 Maxi ball link (2 uds)
1 x	Support Pitot JETI
1 x	BALSA trip 2.0x2.0x1000 mm
1 x	45 mm rods + T patellas set for direction control
1 x	Circlick securite
1 x	Conector JR/Uni Servo male BLUE silicon (10 pcs)
1 x	Crimping tool
2 x	Extension silicon 10 cm (Graupner)
1 x	Compact on-board starting system (9512)
1 x	Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
1 x	DYNAMOMETER S-1580
1 x	1/6 Pilot "Tony"
1 x	Piloto Jet "Red" 1/6 Scale
1 x	Aluminium ignition bad (blue)
1 x	PPM Encoder Module
1 x	Tow hook for tug
1 x	Interface Jack Adapter IKARUS
1 x	Towing hook
1 x	MG cannon 1.8 cm (5 pcs)
1 x	Rigid coupling brass Ø 4 mm L: 25 mm
1 x	Ancla 40 x 24 mm (2 pcs)
1 x	La Capitania di Venetia accesories
1 x	Anchor 25 mm (2 uds)
1 x	Anchor of tow Met. 60 mm
1 x	Stick coupler Ms 15 mm
1 x	Anchor 50 mm (2 uds)
1 x	Railing L250 mm (10 pcs)
1 x	Railing Ø 2mm (20 pcs)
1 x	ALMIRALSANKER anchor 40 mm (2 uds)
1 x	Anchor 25 mm (2 uds)
1 x	Hinge 4x14 mm (20 pcs)
1 x	MZ-12, 6 Channel HoTT
1 x	Propeller G-Sonic 20x8
1 x	40,0 mm hydro-propeller (left hydropropeller)
2 x	Canopy Latch
1 x	Coupling bush 5 - 5 mm
1 x	Beech dowels 2.0 x 1000 mm
1 x	Decorative caps, multicoloured
1 x	Receiver replacement antenna, approx. 85
1 x	Distanzstück motor OS 120 AX
1 x	Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CCW th
1 x	Connectors banna oro 2 mm (M/F) (ultralight)
1 x	BALSA trip 3.0x5.0x1000 mm
1 x	30 cm DEANS female connector
1 x	Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC
2 x	Cable grommet 9.5 mm (4 uds)
1 x	Silicone red 6,0 qmm wire ( 1 m)
1 x	Balsa panel 10x100x1000 mm
2 x	BALSA trip 3.0x3.0x1000 mm
1 x	Extension silicon 35 cm male (Futaba)
1 x	Silicone black 0,5 qmm wire ( 1 m)
1 x	Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x	Set brocas Ø 1.2-1.4-1.6-1.8 mm (4 pcs)
2 x	BALSA triangular 15x15x1000 mm
1 x	Crimping sleeves for cable 1.3 mm (10 pcs)
1 x	MPX 8 pins plug mold
1 x	Pistola termica MH 550 micro
1 x	Silicone red 0,5 qmm wire ( 1 m)
1 x	Snap for floding prop for 2 mm axi
1 x	Pump hose (Ø 6/8 mm) transparent
1 x	Sealing Iron STANDARD
1 x	100g Flux Paste for Silver Solder
1 x	Propeller diller for DLE111 and DA85-150
1 x	Marker ties (20 pcs)
1 x
1 x	Mini neumatic retract 3 mm landing gear (Het-rc)
1 x	Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x	LOWER TOW HOOK
1 x	Fixed launching hook
1 x	Round Rod 1,25x1000 mm
1 x	4 mm Prop Adapter M8
1 x	Strip ABS 2.0x3.0x1000 mm
1 x	3 mm Prop Adapter M6
1 x	Conector JR Servo male (10 pcs)
1 x	Pine wood slat 3.0x10.0x1000 mm
1 x	Connectors banna oro 4 mm (M/F) (ultralight)
1 x	Connector CAN 15
1 x	Protective Cover for wires Ø 15 mm 1000 mm
1 x	Conector JAPAN G2 Set 5 pares
1 x	Conector BEC male (10 pcs)
1 x	10 mm Quick clamp_L (6 pcs)
1 x	Pine wood slat 2.0x10.0x1000 mm
1 x	Walnut wood slat 2.0x2.0x1000 mm
1 x	Crimping sleeves for cable 0.70 mm (10 pcs)
1 x	Pine wood slat 5.0x5.0x1000 mm
1 x	Cable grommet Ø 3.2 mm (4 uds)
1 x	Tip wing protector 40x14 (2 pcs)
1 x	Banna gold connector 2,5 mm (100 M/F pairs)
1 x	50m servo "Premium" wire (white/red/blue)
1 x	Conector FUTABA Servo female (10 pcs)
1 x	Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC
3 x	Beech dowels 10 mm x 1000 mm
1 x	Pine wood slat 3.0x7.0x1000 mm
1 x	Conector male bateria 1s Kavan/Walkera 10cm cable
1 x	Mahogany wood slat 1.5x1.5x1000 mm
1 x	Cable set Premium™ MAXI "one4two"
1 x	Silicone black 1,5 qmm wire ( 25 m)
1 x	Stainless steel cable Ø 0.5 mm (10 m)
1 x	Set brocas Ø 1.5-2.0-2.5-3.0 mm (4 pcs)
1 x	BALSA trip 8.0x8.0x1000 mm
1 x	SE Ring 200 mm (2 pcs)
1 x	Press fitting for 0,5 diam. steel cable (10 pcs)
1 x	Fabric scissors curved (offset handles), 16 cm / 6" length
1 x	Silicone black 1,5 qmm wire ( 1 m)
2 x	Tool for entel
1 x	SE Ring 400 mm (2 pcs)
1 x	Cable S.BUS 3 salidas 100 mm
1 x	Cockpit aluminium closing 5.4g
1 x	100 mm rods + T patellas set for direction control
1 x	Pine wood slat 6.0x6.0x1000 mm
1 x	Red silicone 1,0 qmm wire (50 m)
1 x	Support pump Xicoy X45
1 x	EC-Cutter
1 x	Prolongador S-Bus JR/JR 20cm
1 x	Soporte grifo FESTO vertical (1 pcs)
1 x	Propeller diller for DLE30/DLE35RA/DLE40/DLE55/DLE61/EME 55/DA-5
1 x	Steering arm 16 mm Ø 3 mm
1 x	Soporte grifo FESTO (2 pcs)
1 x	Laminating brush 10 mm, pack/ 50 pcs
1 x	Set brocas Ø 0.4-0.6-0.8-1.0 mm (4 pcs)
1 x	Extension 2/3 lipos JST - JST/C
1 x	Stainless steel cable Ø 0.5 mm (20 m)
1 x	BALSA trip 6.0x6.0x1000 mm
1 x	OBECHI sheet 2.0x3.0x1000 mm
1 x	Silicone black 4,0 qmm wire (25 m)
1 x	CC 03
1 x	Schul-Malpinsel Gr.5
1 x	Set fresas corte acero-carburo Ø 1.8/2.3 mm (2 pcs)
1 x	A/C quality beech plywood BIRCH 600x300x1.0 mm
1 x	A/C quality beech plywood 600x300x6.0 mm
1 x	Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x	Aramid fibre shears Proton®, 21 cm / 8" length
1 x	BALSA leading edge 8x10x1000 mm
1 x	Aro pasacable Ø20 mm (4 pcs)
1 x	BALSA trip 5.0x5.0x1000 mm
1 x	PSC 5
1 x	Extension lead 15 cm Multiplex
1 x	Split M1,2x10 (10 pcs)
1 x	Cable set PREMIUM, fuselage/wing
1 x	Mini Infrared Thermomiter
1 x	Red copper lacquer wire Ø0,2 mm (5 m)
1 x	Extension S-Bus 1-2 silicon 120 cm FUTABA
1 x	A/C economy plywood 600x300x6+.0 mm
2 x	BALSA trip 4.0x4.0x1000 mm
1 x	Prolongador S-Bus JR/JR 10cm
1 x	Beech dowels 4.0 x 1000 mm
1 x	HPP-21 PLUS PC Programmer for Hitec Digital Servos
1 x	Cockpit latch closing I=10 mm
1 x	MPX plug mold V1
1 x	Spare round blades, 28 mm, pack/ 2 pcs.
1 x	Silicone black 2,5 qmm wire ( 1 m)
1 x	Foil for sticking flaps and ailerons
1 x	Modelling compound (Plastilin), sculptor's quality 1 Kg
1 x	Support Antena 2.4 Ghz (2 pcs)
1 x	Manometer 4 mm
1 x	Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x	Mini neumatic retract landing gear
1 x	PRO-HV Dual Action Valve
1 x	Suncover 100cc Red

6,287.87EUR