1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x 48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x Pin type hinge Al 4,5x70 mm to wire (2 pcs)
1 x Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x Gates hinge
1 x 18 mm reinforced hinge
1 x Nylon hinge for flaps 33x9 (2 pcs)
1 x 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
2 x Pin hinge 26x11 mm (10 uds)
1 x Gates hinge black 30x16 mm (2 pcs)
1 x Fast'n EZ-CA-Hinge, lite (12 uds)
1 x 25 mm reinforced hinge
1 x Flap hinge (6 pcs)
1 x Indoor hinge with servo arm integraded
1 x Large flex hinge (12 uds)
1 x Pin type hinge Al 4,5x70 mm (2 pcs)
1 x Long pinned hinge (12 uds)
2 x 67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x Gates hinge aluminium (1 pcs)
1 x Long pinned hinge (6 uds)
1 x Micro flex hinge (12 uds)
1 x Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x Pin type hinge Al 6x98 mm (2 pcs)
1 x Fast'n EZ-CA-Hinge (12 uds)
4 x Medium pin type hinge (12 uds)
1 x 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
2 x Nylon hinge 15x0,3 (10 pcs)
1 x Optical RPM Sensor
1 x DYNAMOMETER S-1580
2 x Pine wood slat 3.0x10.0x1000 mm
1 x Pine wood slat 6.0x6.0x1000 mm
1 x BALSA trip 2.0x10.0x1000 mm
1 x Beech dowels 4.0 x 1000 mm
1 x Beech dowels 2.0 x 1000 mm
1 x OBECHI sheet 2.0x3.0x1000 mm
2 x BALSA triangular 8x8x1000 mm
1 x Beech dowels 10 mm x 1000 mm
1 x Pine wood slat 10x10x1000 mm
1 x Mahogany wood slat 2.0x2.0x1000 mm
1 x Trailing edge BALSA 35x8x1000 mm
1 x Mahogany wood slat 1.5x1.5x1000 mm
1 x BALSA leading edge 8x10x1000 mm
2 x Pine wood slat 5.0x5.0x1000 mm
1 x Linden wood slat 3.0x3.0x1000 mm
2 x Pine wood slat 2.0x10.0x1000 mm
2 x Mahogany wood slat 3.0x3.0x1000 mm
1 x Pine wood slat 3.0x5.0x1000 mm
1 x Liston HAYA 3 x 10 x 1000 mm
1 x Connectors banna oro 4 mm (M/F)
1 x Banna gold connector 2,5 mm (M/F)
1 x Connector CAN 15
1 x Conector AS150 7mm antichispazo (Set: 2 pares)
1 x MPX Sub-D Adaptor
1 x Conector Servo female 4 pines
1 x Banna gold connector 2,5 mm (100 M/F pairs)
1 x Connectors banana oro 6,0 mm Ultralight (M/F)
1 x Gold antispark 5,5 mm plug
1 x Connectors banna oro 8,0 mm (M/F)
1 x Conector BEC female (10 pcs)
1 x Connectors DEANS 4 pins (1 pair)
1 x Connectors DEANS (T)
1 x XH female balance (5S) connector (2 pcs)
1 x ROBART POINT HINGE 4,7mm (5 pcs)
1 x Round flex hinge (12 uds)
2 x Pin hinge 34x16 mm (10 uds)
1 x Small pinned hinge (6 uds)
1 x Carbon fiber flat 1000x3.0x0.13 mm
1 x Joint with bearing M3 22x5,5
1 x MPX-Dean "T" Adapter
1 x Profile ABS half cane 5.0x1000 mm
1 x Premium servo extension 50cm
1 x Futaba male 40 cm extension
1 x Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x Nylon hinge 20x15x0,3 (10 pcs)
1 x Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x bavarianDEMON USB cable
1 x PowerBox Cockpit SRS (incl. SensorSwitch)
1 x DUPLEX 2.4EX Central Box 220 + 2x Rsat2 + RC Switch
1 x PowerBox MAG Sensor
1 x A/C quality beech plywood 600x300x1.5 mm
1 x A/C quality beech plywood 600x300x6.0 mm
1 x BALSA trip 6.0x6.0x1000 mm
2 x Pine wood slat 3.0x7.0x1000 mm
2 x Pine wood slat 1.5x3.0x1000 mm
1 x BALSA trip 10x10x1000 mm
1 x BALSA trip 4.0x4.0x1000 mm
1 x Pine wood slat 2.0x2.0x1000 mm
1 x XH male balance (9S) connector (2 pcs)
1 x XH female balance (6S) connector (2 pcs)
1 x XH female balance (9S) connector (2 pcs)
1 x Wing connector 8pin with pin strip, plug & socket
1 x Protector Connector Dean-T (1 pair)
1 x MPX Support (2 pcs)
1 x XH male balance (4S) connector (2 pcs)
1 x XT-90 connector (pair)
1 x XH male balance (2S) connector (2 pcs)
1 x MPX Support
1 x MR30 connector female
1 x Soldering PCBs 8pin, 5 pieces
1 x Slave-cable USB Easy Sim
1 x IPACS Aerofly Professional Expansion Pack Vol. 1 PC-DVD
1 x Brass ball links BS M3 V1 (10 pcs)
1 x Micro Crystal RX 35.010 Ch 61
2 x Indoor Brushed motor kit
1 x Crystal Universal RX 35.140 Ch 74
2 x EasyFLY Addon
1 x Hovercraft sailcloth
1 x GameCommander USB Universal
1 x Crystal Universal RX 35.120 Ch 72
1 x Interface Jack Adapter IKARUS
1 x Crystal Universal RX 35.020 Ch 62
1 x Servo NARO Max Std
1 x PowerBox MERCURY SR2
1 x PowerBox SOURCE
1 x Rudder 2_Tray 3~3.5 inch
1 x Secraft Fuel system v2, red color
1 x Aluminium cap bolt washer M4 green (8 pcs)
1 x Blue aluminium servo arm V1-Hitec 1,5" inch M3
1 x Aluminium wide washer M4 Gold (4 pcs)
1 x Aluminium wide washer M4 Blue (4 pcs)
1 x Aluminium wide washer M4 Red (4 pcs)
1 x Aluminium wide washer M3 red (4 pcs)
1 x Propeller FALCON 5-BL 24x23.5
1 x Propeller APC 10x7 Glow/Gas
1 x Propeller APC 10x4 Glow/Gas
1 x Propeller FALCON 27x10 3-BL carbono-gas
1 x Battery EMCOTEC LiIon 3000 7.2v
1 x Balsa panel 1.0x100x1000 mm
1 x Propeller APC 16x10 Glow/Gas
1 x FALCON 24X9 CARBON PROPELLER (GAS)
1 x BALSA triangular 10x10x1000 mm
1 x Propeller APC 14x6 Glow/Gas
1 x Turbine CHEETAH 160 SE
1 x Power supply NT 40 Amp.
1 x Paramotor BackPack XXS (without accessories)
1 x Parachute BACKUP X100
7,668.63EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies