Top » Catalog » Hardware » BEC/Cables/Conectors/Interruptor » ROI142KS

15.06EUR

Opto Gas Engine Kill Switch
[ROI142KS]

This kill switch is Optically Coupled to isolate your ignition system from your radio system. (No Interference!!) this device features the following:

•Includes a remote mountable bright LED to indicate when the ignition is armed.
• Optically Coupled input/output is Isolated.
• 8 Bit PIC Controller.
• Li-Po/Li-Ion/A123/Ni-Mh/NiCad Input.
• Up to 20 Volt 15 amp MOS-FET output.
• DSP Noise/Loss of signal Filtering.
• PPM-PCM 2048 – 1024 & 2.4Ghz Interface Support.
• Low Voltage Drop – Less than 150mv.
• 100% Surface Mount Technology.
• Heavy Gauge Wires, universal connectors.
• Small and light weight – only 12 Grams!

This device plugs into a spare receiver channel.

This is a must have safety device for any gas powered plane! This device allows you to safely kill your engine at anytime (on the ground, or inthe air!)

enought units

Reviews

Customers who bought this product also purchased

Propeller MENZ-S 17x10 enought units	Propeller MENZ-S 18x12 enought units	Cylidric hinge 33 mm Ø 2 mm (5 pcs) enought units
MPS Gas-Cap-Powerswitch enought units	Propeller MENZ-S 18x8 enought units	Straightened rod Ø 1.0 mm x 1000 mm enought units

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Servo GO-1006MG (0.052s/60º, 3.0Kg)
52.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Vacuum pump P1-N
1 x	Starter Sullivan-STAR 601
1 x	Xoar Electric Beechwood Prop 20x10
1 x	Slave-cable USB Easy Sim
1 x	Anodized aluminium servo M4x5/8 screw (4 red pcs)
1 x	Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 lilac pcs)
1 x	Propeller 8x4,3 SlowFlyer
1 x	Blind nut M3 (4 pcs)
1 x	Blind nut M6 (4 pcs)
1 x	Aluminium wide washer M4 Blue (4 pcs)
1 x	Xoar Electric Beechwood Prop 21x10
1 x	20x15 Falcon electric V2
1 x	Adapter lead MPX/EC3
1 x	48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x	Propeller MEJZLIK 20x10 Electric light (36 g)
1 x	1000 ml sealer (DOPE)
1 x	PowerBox MAG Sensor
1 x	2 piece mounting frame
1 x	DUPLEX 2.4EX MFlow2 Gas 800
1 x	DUPLEX 2.4EX Central Box 220 + 2x Rsat2 + RC Switch
1 x	PowerBox PIONEER incl. microSwitch
1 x	DUPLEX 2.4EX Central Box 210
1 x	1,5x50 mm allen screwdriver
1 x	Starter EM Gear Power 80
1 x	Hot Glue Stick GREEN
1 x	Starter EM Gear Power 250
1 x	Blind nut M6 (4 pcs)
1 x	Anodized alum. M4x0,7x20 mm Button Head screw (4 dark blue pcs)
1 x	20x13 Falcon electric carbon prop (64g)
1 x	Anodized alum. M4x0,7x20 mm Flat Head screw (4 blue pcs)
1 x	Propeller 12x6 Falcon electric
1 x	Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x	Bec MR UBEC 5A (5v/6v/7v)
1 x	Pin hinge 26x11 mm (10 uds)
1 x	5 LiPo XH>EH adapter
1 x	Micro flex hinge (12 uds)
1 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
2 x	Pin type hinge Al 4,5x70 mm (2 pcs)
1 x	Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x	18 mm reinforced hinge
1 x	CC 01
1 x	Connector Sub-D 2+5 Male
1 x	BEC 3A FOXY
1 x	Flap hinge 33x9 mm (6 pcs)
1 x	4 LiPo XH>EH adapter
1 x	31,0 mm propeller (rigth propeller)
1 x	Battery RX JETI LiIon RB 3100 7.2v
1 x	DUPLEX 2.4EX Central Box 220 + 2x Rsat2
1 x	SC NAVY V15R
1 x	DUPLEX 2.4EX MT 125 temperature sensor
1 x	AddCAP 10AS capacitors
1 x	Motor ACTRO 28-3-1300
1 x	Dust collector for mould cleaning
1 x	Starter 12v (Max 180 and 30ccm)
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs)
1 x	Digital precision scale up to 2000 g
1 x	Digital scale up to 40 kg
1 x	Disposable Injector Bags (30x16cm) 100 pcs
1 x	Screwdriver for Hexagon 1,27mm
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs)
1 x	Ball Link Plier
1 x	Anodized aluminium servo M4x5/8 screw (4 black pcs)
1 x	Xplorer4 anemometro
1 x	Aluminium cap bolt washer M4 green (8 pcs)
1 x	CNC FPV Display screen&Transmitter Holder Vertical
1 x	Xoar Electric Beechwood Prop 24x8
1 x	Aluminium wide washer M4 Gold (4 pcs)
1 x	Xplorer1 anemometro
1 x	Aluminium cap bolt washer M4 blue (8 pcs)
1 x	Anodized alum. M4x0,7x25 mm Button Head screw (4 blue pcs)
1 x	Xoar Electric Beechwood Prop 12x6
1 x	Simulador RealFlight RF-9.5 S (sin emisora)
1 x	Aluminium wide washer M3 blue (4 pcs)
1 x	Aluminium wide washer M3 red (4 pcs)
1 x	19.5x13 Falcon electric 3-Blade carbon prop (54 g)
1 x	SIMtransmitter 6 Mode 2
1 x	Aluminium wide washer M4 Red (4 pcs)
1 x	Aluminium cap bolt washer M3 red (8 pcs)
1 x	15 mm floating pad (30 pcs)
1 x	Anodized aluminium servo M4x5/8 screw (4 lilac pcs)
1 x	Aluminium cap bolt washer M3 black (8 pcs)
1 x	Aluminium M2x12 mm screw (4 pcs)
1 x	Anodized aluminium servo M4x5/8 screw (4 blue pcs)
1 x	Eachine EV800D 5 Inches 800x480 FPV VR Goggles Monitor
1 x	10 mm floating pad (72 pcs)
1 x	Anodized alum. M3x0,5x20 mm Flat Head screw (4 blue pcs)
1 x	Xoar Electric Beechwood Prop 15x8
1 x	RF9 Flight Simulator with Spektrum Controller
1 x	Anodized alum. M4x0,7x20 mm Flat Head screw (4 lilac pcs)
1 x	Aluminium cap bolt washer M4 red (8 pcs)
1 x	Interface Jack Adapter IKARUS
1 x	20,5x14,5 Falcon electric V2 (40 g)
1 x	Blind nut M2 (10 pcs)
1 x	Xplorer3 anemometro
1 x	Xoar Electric Beechwood Prop 22x10
1 x	Aluminium cap bolt washer M3 green (8 pcs)
1 x	EasyFLY Addon
1 x	Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 blue pcs)
1 x	Anodized aluminium servo M3x16 screw (4 red pcs)
1 x	GameCommander USB Universal
1 x	Adapter lead MPX/XT60
1 x	Indoor hinge with servo arm integraded
1 x	76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	Nylon hinge 20x15x0,3 (10 pcs)
1 x	15 mm reinforced hinge
1 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x	Battery charging cable XT60
1 x	25 mm reinforced hinge
1 x	Miniature brass strap hinge, 1 m
1 x	30 cm BEC cable (male)
1 x	33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Cabel charger transmitter GRAUPNER
1 x	Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x	Large flex hinge (12 uds)
1 x	APM2.6 Power module with 5.3V DC BEC
1 x	3 LiPo XH>EH adapter
1 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	Dean "T" - Futaba Adapter
1 x	DPS Switch JR/JR
1 x	CM-3
1 x	Propeller MEJZLIK 20x13 Electric light (41 g)
1 x	Flap hinge (6 pcs)
1 x	CC 02
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x	CC 03
1 x	PropCover 16-20" (1 pcs)
1 x	PropCover 16-20" (2 pcs)
1 x	30 cm BEC cable (female)
1 x	CC 05
1 x	Medium pin type hinge (12 uds)
1 x	Propeller MEJZLIK 21x10 Electric light (36 g)
1 x	Propeller MEJZLIK 9,5x3 SF Carbon Indoor
1 x	Double conector with JR adapter and 200 mm extension
1 x	DPSI Ampere battery backer
1 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x	Copper lacquer wire Ø0,2 mm (5 m)
1 x	Pin hinge 39x20 mm (10 uds)
1 x	Pin type hinge Al 3,0x50 mm (2 pcs)
1 x	Pin hinge 34x16 mm (10 uds)
1 x	Nylon hinge for flaps 33x9 (2 pcs)
1 x	Cabling for Fox MDM1 wings
1 x	67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x	Propeller MEJZLIK 22x10 Electric light (36 g)
1 x	48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x	Gates hinge aluminium (1 pcs)
1 x	Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x	Connector CAN 15
1 x	Gates hinge 30x16 mm (2 pcs)

5,501.85EUR