1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x Propeller POWER-PROP 13x9 Izda
1 x Straightened rod Ø 14.0 mm x 1000 mm
1 x Propeller balancer
1 x Initior Receiver FRX2 Wireless
1 x Aluminium cap bolt washer M3 green (8 pcs)
1 x BALSA leading edge 8x10x1000 mm
1 x Xplorer2 anemometro
1 x Ventus 1:4 set of instruments
1 x LOWER TOW HOOK
1 x Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø21 mm)
1 x Propeller POWER-PROP 14x9
1 x ESC MEZON 115 Opto
1 x LASER 73" 1.85m (05) PILOT
1 x Fibra de vidrio 80 g/m² (2 m x 100 cm)
1 x Retract undercarriage for gliders up to 2 Kg
1 x Extension silicon 10 cm (Futaba)
1 x Extension S-Bus 1-2 silicon 120 cm FUTABA
2 x M3 Maxi ball link (2 uds)
1 x Joint with bearing M2 22x5,5
1 x Tape GFK 38 mm
2 x SE Ring 450 mm (2 pcs)
1 x SE Ring 240 mm (2 pcs)
1 x Electric Landing Gear "Black Edition" ULTIMATUM 3.0 (Elektron Re
1 x FALCON 20X9 CARBON PROPELLER (GAS)
1 x Tubo espiral FESTO 6x1 Black
1 x GameCommander USB Universal
1 x Baal link 4/14/4 (5 pcs)
2 x SyRen 10A 6V-24V Regenerative Motor Driver
1 x Head runner
1 x Head lower part New
1 x Autogyro Cierva C30 Spain
2 x Nut M1,6
1 x Blade holder lower
2 x Nut M2
1 x LA500 rotor head core
1 x Motor rotor LA-500
1 x Head lower part
2 x Oracover Black 10 m
1 x 58 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x 4,8x1000 mm 2:1 blue termoretract tube
1 x ORACOVER Fluor red (2 m)
1 x 2,4x1000 mm 2:1 red termoretract tube
2 x 1,6x1000 mm 2:1 red termoretract tube
1 x Oracover CARBON Metalic 1 m
1 x Monokote BLANCO jet (1.8x0.65m)
1 x 3,2x1000 mm 2:1 red termoretract tube
1 x Carbon fiber rod 16 mm x 1000 mm
1 x Carbon fiber rod 1.5 mm x 1000 mm
1 x Cable silicona female batt. receptor 30 cm (Futaba)
2 x Extension silicon 25 cm (Graupner)
1 x Extension silicon 30 cm female (Graupner)
2 x SE Ring 360 mm (2 pcs)
1 x Bidule 55 V3 2460 mm
1 x Bidule 55 2460 mm Cabina
1 x Propeller MENZ-S 20x10
1 x Propeller MENZ-S 21x12
1 x ANGEL 48" pp red/blue/white
1 x Propeller MENZ-S 21x8
1 x Sprung retractable undercarriage (Alfa model)
1 x Glider retract undercarriage 8-16 Kg 2.5-3.2(without wheel) 140m
1 x Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x Carbon roving DowAksa / 24k / 1600 tex
1 x Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x PARTALL® Hi-Temp Wax, 340 g
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x M2/M1/6 3Diam short black ball link V1 (6 pcs)
1 x Extension silicon 35 cm (Futaba)
1 x Extension silicon 30 cm female (Futaba)
1 x Ball link M3 (6 uds)
1 x Prolongador S-Bus JR/JR 20cm
1 x Long ball link M1.6 (6 uds)
1 x M2,5 Diam metal ball link V3 (2 pcs)
1 x M2,5 5Diam short black ball link V2 (2 pcs)
1 x M2/M1/6 3Diam long black ball link V1 (2 pcs)
1 x Extension 30 cm (Futaba)
1 x VTX 477 Carbon Rotorblade
1 x 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x VBar Control Touch, midnight black
1 x Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x SE Ring 200 mm (2 pcs)
1 x 20x200 mm battery rings
1 x Tail boom brace LOGO 480
1 x 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Civilian pilot "Gramps" size 9cm (Slimline)
1 x Piloto jet 130 mm
1 x 1/10 Pilot "Jimmy"
1 x Piloto Jet "Green" 1/6 Scale
1 x Propeller VESS 27A
1 x Aluminium tube with fibreglass case ø35x1.5mm, 500mm
1 x 13 mm wing servo holder
1 x Astra wing Joinner (Top Model)
1 x 7 mm gas motor standoff
1 x Avia (Top Model)
1 x Propeller MENZ-S 20x8
1 x Propeller MENZ-S 16x10 3-Blades
1 x Retract undercarriage for gliders 12-25 Kg 2-2.8 (without wheel)
1 x CA Glue fast 20g
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x Foaming agent for epoxy resins 200 g
1 x EVP Unit for AXI2208/xx and 2212/xx
1 x VPP system propeller for AXI VPP motors (spare)
1 x Extension 90 cm (Futaba)
1 x Long ball link M3 (6 uds)
1 x 0,14 mm PVC servo wire extension, ZH micro conector.
1 x Ball link M3 RPA's-UAV's
1 x Cabel "Y" 15 cm
1 x Extension 7.5 cm
1 x Socket head ball link M3 (2 uds)
1 x Ball link M2 (10 pcs)
1 x Circlick securite
1 x M2,5 5Diam metal ball link V3 (2 pcs)
1 x Premium servo extension 25cm
1 x Extension silicon 50 cm (Graupner)
1 x 200 mm extensión servo HITEC/JR
1 x Blue metalic ball link M3/3 azul (2 pcs)
1 x Ball link M1.6 (6 uds)
1 x M2/M1/6 3Diam short black ball link V1 (2 pcs)
1 x Extension 100 cm (Futaba)
1 x Short ball link M1.6 (6 uds)
1 x Joint with bearing M2,5 22x5,5
1 x Ball link M3 (10 pcs, flat ball)
1 x Short ball link M2 (6 uds)
1 x Extension silicon 75 cm (Futaba)
1 x Futaba Female 40 cm extension
1 x Extension silicon 30 cm male (Futaba)
1 x M3 Maxi ball link (2 uds)
1 x Joint with bearing M3 22x5,5
1 x Blue metalic ball link M2/2 azul (2 pcs)
1 x 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x Foil for sticking flaps and ailerons
1 x Spikes Band (5 m)
1 x SE Ring 480 mm (2 pcs)
1 x Marker ties (20 pcs)
1 x Tape GFK 25 mm
1 x 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x SE Ring 400 mm (2 pcs)
1 x 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x LOGO 600 SX (kit)
1 x Logo 400 SE VBar
1 x Ring 320 mm length (5 pcs)
1 x 20x1000 mm Ring Strap Back To Back
1 x Tape GFK 50 mm
1 x SE Ring 300 mm (2 pcs)
1 x SE Ring HACKER 300 mm (2 pcs)
1 x Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x Cinta Goldfix 1m
1 x 14x60 mm Mini rings Tie Wraps (4 pcs)
1 x Piloto Jet "Red" 1/6 Scale
1 x 1/6 Pilot "Tony"
1 x Civilian pilot "Joe" size 9cm (Slimline)
1 x Civilian pilot "Pamela" size 9cm (Slimline)
1 x Militarian pilot "Fly Boy" size 9cm (Slimline)
1 x 1/12 Pilot "Langley"
1 x Piloto JET 1:3,5
1 x 1/6 Pilot "Buddy"
1 x 1/12 Pilot "Tom"
1 x Pilot "Adolf" Legends Series (Slimline)
1 x Pilot WWII US Navy Pacific 12" Scale 1/6-1/5
1 x Bidule 170 ARF 3.48 m
1 x 1/4 Pilot "Mike"
1 x 1/4 Pilot "Heidi"
1 x Militarian pilot "Kamikaze" size 9cm (Slimline)
1 x 1/12 Pilot "Cougar"
1 x Piloto RC Civil 1/5- 1/6 Scale 12"
1 x 1/12 Pilot "Fighter"
1 x 1/10 Pilot "Jack"
1 x Civilian pilot "G-Man" size 9cm (Slimline)
1 x Pilot "Goose" (Slimline)
1 x 1/7 Pilot "Japanese"
1 x Pilot JAN 1/4 Saiplanes
1 x Piloto WWII USAAF 12" Scale 1/6 - 1/5
1 x Civilian pilot "Curt" size 9cm (Slimline)
1 x Pilot "Dick" Legends Series (Slimline)
1 x Propeller POWER-PROP 14x8
1 x Propeller POWER-PROP 14x10
1 x 3-blades 16x10 carbon prop Super Silence
1 x Propeller KAVAN 32x12 2-Bl
1 x Propeller FOXY 34x12 2-Bl
1 x 6,4x1000 mm 2:1 black termoretract tube
1 x 19 mm 2:1 black termoretract tube
1 x 6,4x1000 mm 2:1 red termoretract tube
1 x Hardener Aero EPH 161 (250 g)
1 x Oracover CHROME 2m
1 x Oracover Azul 2 m
1 x 165 mm PVC transparent battery termo-retract 165 mm (10 m)
1 x 105 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x 1,2x1000 mm 2:1 red termoretract tube
1 x Monokote BLUE metalizado (1.8x0.65m)
12,461.48EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies