1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Silicone 0,50 qmm servos wire Graupner(5 m)
1 x Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE
1 x PVC 0,08 qmm Graupner servos wire (5 m)
1 x PVC 0,14 qmm servos wire Graupner (100 m)
1 x Silicone 0,14 qmm servos wire Graupner (5 m)
1 x Silicone red 0,25 mm² wire (25 m)
1 x PVC 0,08 qmm Futaba servos wire (5 m)
1 x 10m servo "Premium" wire (white/red/blue)
1 x White silicone 0,25 qmm wire (100 m)
1 x Silicone 0,35 qmm servos cable Futaba (5 m)
1 x White silicone 0,25 qmm wire (150 m)
1 x Green silicone 0,25 qmm wire (50 m)
1 x Silicone 0,35 qmm servos wire Futaba (100 m)
1 x Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC
1 x 100m servo "Premium" wire (white/red/blue)
1 x White silicone 0,25 mm² wire (25 m)
1 x Silicone 0,35 qmm servos wire Graupner(100 m)
1 x Silicone 0,50 qmm servos wire Graupner(100 m)
1 x Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC
1 x PVC 0,14 qmm servos wire JR/Graupner (5 m)
1 x Silicone 0,14 qmm servos wire Graupner (100 m)
1 x PVC 0,25 qmm servos wire Graupner (5 m)
1 x JR silicone servo wire 0,35 qmm / 5m
1 x PVC 0,14 qmm servo wire Futaba (5 m)
1 x 5 line servos wire black (1 m)
1 x Cabel PVC 2 x 0.25 mm2 (5 m) red-black
1 x PVC 0,14 qmm servos wire Hitec/Mpx (5 m)
1 x Medidor ángulos y/o incidencias
1 x Propeller balancer
1 x Angle measurer
1 x Angle of incidence meter
1 x WingFix ULTRA Black Edition
1 x L-Connector 1.5 mm x 1000 mm
1 x Xplorer1 anemometro
1 x Premium servo extension 75cm
1 x Profile ABS half cane 2.0x1000 mm
1 x Ventus 1:4 set of instruments
1 x Crimping tool
1 x Slave-cable USB Easy Sim
1 x Vacuum bag, 1200 mm x 50 m
1 x Straightened rod Ø 1.5 mm x 1500 mm
1 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x 20 g tin paste
1 x Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
2 x 800TVL CMOS camera for FPV
1 x 3 mm metalic joint for DA-35 or DA-75 cilinder/elbow
1 x 3-blades 21x12carbon prop Super Silence
1 x 60 mm long Prop hub for ZG45SL, ZG62/S/SL and ZG80B
1 x 500 ccm complete gasoline fuel tank
1 x Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
1 x 15 cm PTFE-tubing for 25 mm tubes
1 x Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC
1 x Set Altimeter SHRead
1 x Ferrita 27x14x7 mm
1 x DC Small for MultiLog & UltraLight
1 x Glider retract undercarriage 8-16 Kg 2.5-3.2(140 mm wheel with b
2 x SCHARNHORST accessories
1 x Retract undercarriage for gliders 12-25 Kg 2-2.8 (without wheel)
1 x Metal ring front FEMA
1 x Propeller hub spacer 8/5.5
1 x Cooler motor type 300
1 x Cooler motor type 400
1 x 
1 x 
1 x Spinner negro 40 mm
1 x Yellow smoke canister 65 g
1 x Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm)
1 x Hard brass tubing (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x ABS tube 16.0x14.0x1000 mm
1 x ABS tube 3.0x1.0x1000 mm
1 x Tailwheel for 40/90 size
1 x Skies 2x 335 mm + 1x Esqui 250mm
1 x Tail wheel for 5-8 kg models
1 x Quick hose connector 3-3 mm
1 x Faucet FESTO
1 x Nylon gear block Ø 5 mm (2 uds)
1 x Landing gear clamp for Ø 4 mm (4 uds)
1 x Landing gear strap large (4 uds)
2 x Extension MPX-MPX 20 cm
1 x PCI-HV ignition conversion set with Zenoah rubber plug cap for Z
1 x Muffler ZG 20
1 x Insulator block ZG 38/S/SC
1 x Long reed valve petal for DA 100-R carburator
1 x Motor Mount for TITAN ZG45 and ZG62, length 54 mm
1 x Pitts Muffler kit for CAP 21
1 x L ELBOW DA-150 "normal" (2 pcs)
1 x Piston for ZG 20
1 x Piston ring for ZG 20 and G240RC
1 x Piston ring for ZG 26SC/EI, ZG 26SCM ZG 26SLH and Zenoah G260RC/
1 x Metalic joint for DA-50R/DA100 cilinder/elbow
1 x Crimping sleeves for cable 0.85 mm (10 pcs)
1 x Bearing block for noseleg landing gear
1 x Legs + electric brakes for Viper Jet 1700 mm
1 x Fiberglass landing gear for 140-160
1 x Legs + electric brakes for Viper Jet 90
1 x FESTO connector M5 Quick 6 mm
1 x Civilian pilot "Joe" size 9cm (Slimline)
1 x T-Hose connector 6-6-6 mm
1 x Threaded coupler ALU M3 Ø 5 (2 uds)
1 x Tirpiz Battleship 1:200
1 x LUCAS pilot ARTF
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x Ballast 700gr OPALE
1 x Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm
1 x Glass fibre braided sleeve (45mm) roll 20m
1 x T-Hose connector 3-3-3 mm
1 x T-Hose connector 3-3-3 mm
1 x Y-Hose connector 4-4-4mm
1 x Giant Scale Muffler D.A. 70
1 x LOWER TOW HOOK
1 x Towing hook
1 x Adjustable launching hook
1 x Towing hook
1 x SERVO HOLDER
1 x Wing OXY 5,0 m2
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x Trike XL motor set (motor+esc+prop)
1 x Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m
1 x Breatex™ Non-woven absorber 150 g/m² Roll 50m
1 x Alignment dowels (2 parts, outer-Ø 8 mm) bag/ 100 pairs
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
1 x Buy Perforated film 100 cm / 10 m
1 x Buy Perforated film 145 cm / 50 m
1 x Carbon fiber rod 3.0 mm x 1000 mm
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x Breatex™ Non-woven absorber 150 g/m² Roll 100m
1 x Breatex™ Non-woven absorber 300 g/m² Roll 41 m
1 x Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x Paramotor BackPack XXS (without accessories)
1 x Breatex™ Non-woven absorber 150 g/m² Roll 20m
1 x Buy Perforated film 100 cm / 50 m
1 x Carbon fiber flat 1000x6.0x0.8 mm
1 x Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x Paramotor BackPack XXS 2
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x 
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x Opale Rucksack
1 x 
1 x Buy Perforated film 100 cm / 20 m
1 x Set freno para ruedas Dia. 127 mm
1 x Civilian pilot "Gramps" size 9cm (Slimline)
1 x Antenna holder bracket double
1 x White 2,4 GHz antenna exit guides (2 pcs)
1 x Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
10,456.82EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies