130.00EUR

Eachine EV800D 5 Inches 800x480 FPV VR Goggles Monitor
[ROIEV800D]


Gafas FPV Eachine EV800D

Dimension: 180*145*82mm
Weight: 362g without antenna
Belt : three-way adjustable belt

Specification
Build in DVR
Record up to 720*576px full frame rate video, no frame lost (C10 card required)
Replay in MENU
Require C10 card to record full frame rate
Diversity Super sensitiveness in 2pcs RX5808 PRO modules
Great performance when two types (Linear and Omni) antennas are used
Display Screen size: 5.0 inch
Screen resolution: 800*480(No blur after enlarge by the lens)
Screen brightness: 600cd/m2 with special high brightness backlight LED for outdoor FPV
View Angle: 140/120 degree(Horizontal/Vertical)
Lens 3x boost of the video to acquire intense feel-in-there video; 92% transparent rate distort if light;
Battery Built-in 7.4V/1200mAh battery;
Each battery circle offer around 2hr working time;
11-20V wide range recharging voltage range, typical recharging voltage is 12V 2S (7.4 V) /3S(11.1V) battery as back-up power t to have long working time.
Frequencies (5.8GHz, with RaceBand)
CH CH 1 CH 2 CH 3 CH 4 CH 5 CH 6 CH 7 CH 8
GROUP A or FR1 5865 MHZ 5845 MHZ 5825 MHZ 5805 MHZ 5785 MHZ 5765 MHZ 5745 MHZ 5725 MHZ
B or FR2 5733 MHZ 5752 MHZ 5771 MHZ 5790 MHZ 5809 MHZ 5828 MHZ 5847 MHZ 5866 MHZ
C or FR3 5705 MHZ 5685 MHZ 5665 MHZ 5645 MHZ 5885 MHZ 5905 MHZ 5925 MHZ 5945 MHZ
D or FR4 5740 MHZ 5760 MHZ 5780 MHZ 5800 MHZ 5820 MHZ 5840 MHZ 5860 MHZ 5880 MHZ
R or FR5 5658 MHZ 5695 MHZ 5732 MHZ 5769 MHZ 5806 MHZ 5843 MHZ 5880 MHZ 5917 MHZ

Features:
Built-in with super HD DVR record up to 720*576px resolution
Diversity RaceBand 40ch Auto-Searching
Two system (Display/Record duo core separated chipsets ) ensure no delay in displaying and no frame lost in recording(please use C10 super speed card to ensure the full frame recording)
Work friendly with pilot-OSD, no block on the important flying OSD information; Separable design, 5 inch screen can be used as small monitor on radio controller or with tripod;
HD high brightness 5 inch LCD specially tuned for FPV racing;
Diversity function, Built-in super sensitive 5.8GHz 40ch receiver module, with RaceRand;
Advanced auto-searching function and the working frequency show on screen;
Built-in 7.4V 1200mAh battery, each full charge offer 2 hours working time;
Wide range re-charge voltage 11-20V;
Accept 2S or 3S batteries as back-up power source, to prolong the working time; Nice ergonomic design and fit different faces;
Super-wide visible angle up to 82 degree;
92% transparent lens adopted, no distort, no blur on the edge of screen;
Light weight 375g with 3.5 hr 2000mAh battery, RTF for any scale racing game;
5 Inch 800*480px HD high brightness LCD

Package Included :
+ 1 x Eachine EV800D
+ 1 x Charger
+ 1 x 5.8G halfplanner antenna with RP-SMA connector
+ 1 x 5.8G RHCP cloverleaf antenna with RP-SMA connector
+ 1 x AVin cable
+ 1 x DCpower cabler to 3S balancer plug cable
+ 1 x Fresnel lens clearning kit
+ 1 x Instruction manual (English)


few units
few units

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
1 x Electric spoiler 250 mm (2 pcs)
1 x Connectors DEANS (T)
1 x Connectors banna oro 4 mm (M/F) (ultralight)
1 x Canopy Latch
1 x Connectors banna oro 8,0 mm (M/F)
1 x Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x Wing connector 8pin with pin strip, plug & socket
1 x Canopy Lock V1 M3 Blue (2 pcs)
1 x Gold antispark 5,5 mm plug
1 x Steering arm 12 mm Ø 3 mm (2 uds)
1 x Connectors banna oro 2 mm (M/F) (ultralight)
1 x Connectors banna oro 4 mm (M/F)
3 x Digital Air Speed Sensor And Pitot Tube Set
1 x Aluminium alloy coupler for carbon tube 6/M4
2 x Stainless steel cable Ø 0.62 mm (10 m)
1 x Gold antispark 4 mm plug
1 x Stainless steel cable Ø 0.5 mm (20 m)
2 x Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x XH male balance (4S) connector (2 pcs)
4 x Connectors banna oro 3,5 mm (M/F)
1 x Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x Connectors banna oro 6,0 mm (M/F)
2 x Steering arm 12 mm Ø 4 mm
2 x PPM Encoder Module
1 x Screw-lock connector M2 (2 uds)
1 x Cierre cabina aluminio Ø4, I=10 mm
2 x Banna gold connector 2,5 mm (100 M/F pairs)
1 x Connectors banna oro 0,8 mm (M/F)
2 x Locking cable tie 3.2x142 (uds)
1 x Stainless steel cable Ø 0.5 mm (10 m)
1 x 2 mm male connector (2 pcs) with safety connector
1 x Stainless steel cable Ø 1.3 mm (10 m)
1 x EC5-Set male, simple quality, 2 x female pin, 1 x blue housing
1 x Optotronix Aurora Plug
1 x Cap closure 33/23.5mm (2 uds)
2 x Connectors banna oro 8,0 mm (Male) 5 pcs.
1 x Stainless steel cable Ø 0.5 mm (2 m)
1 x Covered closure or fairings
2 x Steering arm 16 mm Ø 4 mm
1 x XH male balance (2S) connector (2 pcs)
1 x EC5-Set female, simple quality, 2 x female pin, 1 x blue housing
2 x XH female balance (3S) connector (2 pcs)
1 x Steering arm 16 mm Ø 4 mm (2 uds)
2 x L cockpit anchor "tipe F3A" (2 pcs)
2 x Crimping sleeves for cable 0.70 mm (10 pcs)
1 x 30 cm DEANS female connector
2 x Connector CAN 15
2 x Tube Pitot to PIXHAWK
1 x Cockpit plastic closing
1 x SUS wire 3m (nylon coated)
2 x 2 mm female connector (2 pcs) with safety connector
3 x Cabin latch Fox MDM1 4m (pair)
1 x Screw-lock connector Ø 2 mm (2 uds)
1 x XH female balance (4S) connector (2 pcs)
1 x XH male balance (5S) connector (2 pcs)
1 x Conector AS150 7mm antichispazo (Set: 2 pares)
1 x Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x Locking cable tie 4.6x203 (uds)
2 x Aluminium cap bolt washer M3 blue (8 pcs)
1 x Aluminium wide washer M4 Gold (4 pcs)
1 x Spring lock washer 3.1 mm (20 pcs)
1 x Aluminium cap bolt washer M4 blue (8 pcs)
1 x Quicklock washer 3 mm (10 pcs)
2 x Aluminium wide washer M3 gold (4 pcs)
1 x Spring lock washer 4.1 mm (20 pcs)
1 x Aluminium wide washer M4 Black (4 pcs)
1 x Spring lock washer 2.1 mm (20 pcs)
1 x Aluminium cap bolt washer M3 green (8 pcs)
1 x Flat washer 3.2 mm (20 pcs)
1 x Flat washer 1.7 mm (20 pcs)
1 x Aluminium cap bolt washer M3 red (8 pcs)
1 x Aluminium wide washer M4 Blue (4 pcs)
1 x EasyFLY Addon
1 x SIMtransmitter 6 Mode 2
1 x BALSA trip 6.0x6.0x1000 mm
1 x Extension 90 cm (Futaba)
1 x Premium servo extension 50cm
1 x Cut tube
1 x ABS tube 10.0x8.0x1000 mm
1 x Oracover Black 2 m
1 x Adapter lead MPX/XT60
1 x DPSI Ampere battery backer
1 x 120x60 mm SLH KOVO wheel
1 x Snap short M2 (10 uds)
1 x Wing bolts M3 Steel screw blue (2 pcs)
1 x Crimping sleeves for cable 1.3 mm (10 pcs)
1 x Connectors MPX black female
1 x Control for forward wheel (MINI)
1 x Conector FUTABA Servo female (10 pcs)
1 x Banna gold connector 2,5 mm (M/F)
1 x Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x Tip wing protector 28x10x12 (2 pcs)
2 x Conector Servo female 4 pines
2 x Conector BEC female (10 pcs)
2 x Conector FUTABA Servo female BLUE silicon (10 pcs)
1 x Conector JAPAN G2 Set 5 pares
1 x XH male balance (6S) connector (2 pcs)
1 x One touch canopy lock
1 x Wing bolts M6 Steel screw Red (2 pcs)
2 x Lock nut aluminium M2.5 (4 pcs)
1 x Tapping Screw M2.2x9.5 (10 pcs)
1 x Treaded hexagonal socket insert M4 Br (4 pcs)
1 x Tapping Screw M2.9x9.5 (10 pcs)
1 x Blue Aluminium lock nut M2 (4 pcs)
2 x Hexagonal Nut M4 (10 pcs)
1 x Circlik for shaft 3.2 mm (10 pcs)
1 x Carbon plate 350x150x1.0 mm
2 x Blue Aluminium lock nut M3 (4 pcs)
2 x Socket Head Screw M2x5
1 x Hexagonal Nut M4 (20 pcs)
1 x Nut for mounting M5 (4 pcs)
2 x Lock nut M3 (10 pcs)
1 x Spring pin Ø 2 x 6 mm (10 pcs)
1 x Tapping Screw M2.9x13 (10 pcs)
1 x Lock nut aluminium M3 (4 pcs)
1 x Nut for mounting M2,5 (4 pcs)
1 x Nut for mounting M2 (4 pcs)
1 x Complete kit CAT 966G II WEDICO-construction-models
1 x Screw M2.5x20 (10 pcs)
2 x Hexagonal Nut M2.5 (10 pcs)
1 x Blind nut M6 (4 pcs)
1 x Threaded insert M4 (4 pcs)
1 x XH male balance (3S) connector (2 pcs)
1 x Anodized alum. M3x0,5x20 mm Flat Head screw (4 blue pcs)
1 x Blind nut M6 (4 pcs)
1 x Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x Red aluminium servo arm V2-Futaba 1,75" inch M3
1 x Anodized aluminium M4x0,7x20 mm screw (4 blue pcs)
2 x Screws 2,2 x 6,5 mm (20 pcs)
1 x Blue aluminium servo arm V2-Hitec 1,5 inch M3
1 x Blue aluminium double servo arm HITEC 2,5 inch M3
1 x Gold aluminium double servo arm JR/Graupner 40 mm M3 F3A
1 x Red aluminium servo arm V2-Futaba 1,25" inch M3
1 x Red aluminium servo arm V1-Futaba 15 mm iM2
1 x Servo MKS 6100 DS
1 x Blue aluminium servo arm V1-Hitec 1,0" inch M2
1 x Servo BLS-M55B 61.2kg
1 x Aluminium M2x12 mm screw (4 pcs)
1 x Gear for D 200 BX
1 x Aluminum Bayonet / strongal D25 mm / 1 m
1 x Motor A2212/13T
1 x Anodized aluminium servo M3x16 screw (4 red pcs)
2 x Servo M2x5/16 screw (4 pcs)
1 x 10 mm floating pad (72 pcs)
2 x L-shaped servo mount
1 x Gold aluminium servo arm V2-JR 1,0" inch M3
1 x SUPER STRANGTH SERVO ARMS FUTABA LONG (8 PCS)
1 x 15 mm floating pad (30 pcs)
2 x Lock nut M2.5 (10 pcs)
1 x Pan Head Screw M2x8 PH
1 x Anodized aluminium servo M4x5/8 screw (4 red pcs)
1 x Anodized aluminium servo M4x5/8 screw (4 lilac pcs)
2 x Blind nut M4 (4 pcs)
1 x Servo holder for retract
1 x Titanium M3x0,5x6 mm Flat Head screw (4 pcs)
1 x Brazo servo MKS Metal M3-L:30 (2 pcs)
2 x PS-050 TONEGAWA Servo
1 x Anodized aluminium servo M4x5/8 screw (4 silver pcs)
1 x Aluminium wide washer M3 red (4 pcs)
1 x Anodized alum. M4x0,7x20 mm Flat Head screw (4 lilac pcs)
1 x aluminium servo arm V2-JR 2,0 inch M3
1 x Gear for MICRO BB
1 x Red aluminium servo arm V1-Futaba 1,0" inch M2
2 x Nylon Screw M6x40
1 x Screw M2x8 (10 pcs)
2 x Anodized alum. M4x0,7x25 mm Button Head screw (4 blue pcs)
1 x HV6150 Digital Servo
1 x SSPS105 Super Hi-Power servo
1 x Eachine EV800D 5 Inches 800x480 FPV VR Goggles Monitor
2 x Turbina XICOY X180 light
1 x Conector BEC male (10 pcs)
1 x PBS TJ 40-G1 Turbine
1 x Cable grommet Ø 3.2 mm (4 uds)
2 x Fully Threaded Steel Rod Duralumin 90 mm M3 (2 pcs)
1 x PBS TJ 40-G2 Turbine
1 x Turbina X132 H "Compact Version"
1 x Turbina X45 H "Light Version"
1 x Turbina X45 H "compact"
2 x Telemetria XYCOY adapter
1 x Turbina X132 H "Light Version"
2 x Turbina KINGTECH K320 G5
1 x Conector JR Servo female (10 pcs)
1 x Connectors banna oro 2 mm (M/F)
1 x Conector FUTABA Servo male BLUE silicon (10 pcs)
1 x Conector JR Servo male (50 pcs)
1 x MPX housing with flange (4 pcs)
1 x MPX PCB "Gender-Changer (5 pcs)
1 x Protector Connector MPX (1 pair)
1 x XT-60 connector (male)
1 x Mounting frame MPX male connector
1 x Red 3m5 mm connector holder
1 x XT60 Connector with Holder Male 2pcs
1 x Wing conexion 2 servos Futaba 50 cm
3 x PIX Hawk with accesories
1 x Blind nut M5 (4 pcs)
1 x Fully Threaded Steel Rod M2,0 (2 uds) 250mm
1 x Fully Threaded Steel Rod SUS303 70mm M3 (2 pcs)
1 x Fully Threaded Steel Rod M3
1 x Servo M2x7/16 screw (4 pcs)
1 x Lock nut M5 (10 pcs)
1 x Battery RX JETI LiIon RB 5200 7.2v
1 x DUPLEX 2.4EX MU 3 Sensor
1 x DUPLEX 2.4EX Central Box 220 + 2x Rsat2 + RC Switch
1 x DUPLEX 2.4EX Expander E4
1 x DUPLEX 2,4GHz MRPM-AC EX
1 x Kontronik connector (10 connectors, 5 pairs)
1 x Wing connector 8pin with pin strip, plug & socket
1 x Soporte carbono MR30 (2 pcs)
1 x XT-60 connector (female)
1 x MPX Support (2 pcs)
1 x PIN Connector female (100 pcs)
1 x Servo Connector Brackets (10 pcs)
1 x Protector Connector Dean-T (1 pair)
1 x XT-30 connector (pair)
1 x XT-90 connector (pair)
1 x MPX PCB "4 Pins", 5 pieces
1 x Soldering PCBs 8pin, 5 pieces
1 x MPX PCB "6 Pins", 5 pieces
1 x Contacto macho pin conector (10 pcs)
1 x Mounting frame MPX female connector
1 x Bag connector 2 mm
1 x MPX Support
1 x MPX screwable clips (4 pcs)
1 x Red 4 mm connector holder
1 x Wing conexion 2 servos JR/Graupner 50 cm
1 x Nut for mounting M6 (4 pcs)
1 x Propeller diller for DLE111 and DA85-150
1 x Propeller diller for EME35 and DLE35
1 x Junta humo metalica G55 (DLE55/DLE111/DLE222)
1 x Spring Clip Ø25 mm
1 x Giant Scale Muffler D.A. 70
1 x Titanium M3x0,5x12 mm Flat Head screw (4 pcs)
1 x Spring lock washer 2.6 mm (20 pcs)
1 x Servo Mount M (blue)
1 x Lipo GENS 2300 6.6v 2s1p Li-Fe Pack emisora
1 x Small aluminium horn blue (2pcs)
1 x Propeller Pleg CAM Carbon 10x6
1 x Lock nut M2 (20 pcs)
1 x DUPLEX 2,4EX Brackets for Transmitter DC/DS
1 x DUPLEX 2.4EX Satellite receiver Rsat 2
1 x Socket Head Screw M2,5x12
1 x 140 mm rods set for direction control
1 x Battery E-Flite 150 mAh 1S 3,7V 45C for WHIPIT
2 x Turbina XICOY X180 compact
1 x LiPo TopFuel ECO-X 5000 mAh 2s 35C MTAG
1 x TopFuel LiPo 20C-ECO-X 2400mAh 2S MTAG
1 x Turbina XICOY X95 compact
1 x Epoxy Resin HT 2 + Hardener HT 2, kit/ 296 g
1 x Epoxy Resin L + Hardener LT kit/ 3125g
1 x Epoxy 40 min (Hardener). 10Kg
1 x DUPLEX 2.4EX MUI 150 Sensor
1 x DUPLEX 2.4EX MUI 75
1 x Duplex 2.4 EX TopFuel MTAG Battery Reader
1 x DUPLEX 2.4EX MULi 6s M
1 x 4 mm M3 red control terminal (4 pcs)
1 x 6 mm aluminium horn with patella
1 x Futaba 14/20 mm servo pull-pull double arm with ball link
1 x Futaba 20 mm servo arm
1 x Futaba 2x20 mm servo double arm
1 x Ball link M3 (10 pcs, flat ball)
1 x Adapter rotula M3
1 x Epoxy SLOW-CURE™ 30 min (260g)
1 x Male Prolonger TP 4/5S
1 x LiPo TopFuel ECO-X 3800mAh 4s 35C MTAG
1 x Epoxy 40 min (Resin). 5 Kg
80,664.10EUR
Manufacturers
Manufacturer Info
Roi-Import
Roi-Import Homepage
Other products
Languages
Español English
Currencies