1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Chili F3K 2 wing servo mounted
1 x X-RAY Micro QR (Fuselage with canopy)
1 x Chili Race F3K 2 wing servo mounted(carbon biax)
1 x 2000A 12V Lithium Jump Starter with 150PSI Air inflator
2 x Servo NARO Max Std
1 x 
4 x Astra (Top Model)
3 x IKURA GPS 4.28 m
1 x Albatros ,spare cockpit (Top Model)
2 x Albatros red/white (Top Model)
1 x EASYGLIDER 4 RR
2 x ACTIVE ARF Electric 1.995 mm
1 x FANTASY ARF 3.0m, Fundas alas
1 x FUNRAY RR
1 x Astra wing Joinner (Top Model)
1 x Fascination 3600 mm, Spare Elevator (Top Model)
2 x Aero-Master (Aero-naut)
1 x Avia (Top Model)
1 x ASG 32 560 mm
1 x Fascination 3600 mm ARC
2 x Avia spare fouselage CF reinforced (Top Model)
1 x CYCLONE XT 6.2m ARF
1 x Gracia Maxi ARF, bags (Top Model)
1 x Prelude ARF 2500 mm (TopModel)
1 x Fast'n EZ-CA-Hinge (12 uds)
1 x Fixed launching hook
1 x Allen wheel collar M4x6
1 x Flap hinge (6 pcs)
1 x 15 mm reinforced hinge
1 x Conector FUTABA Servo male BLUE silicon (10 pcs)
1 x Cabin latch Fox MDM1 4m (pair)
1 x Canopy Lock V1 M3 Red (2 pcs)
1 x 25,0 mm 3-BL M4 hydro-propeller (left hydropropeller)
1 x Pin hinge 39x20 mm (10 uds)
1 x Aluminun wheel collar 6 mm Ø (4 uds)
1 x Carbon fiber flat 1000x3.0x1.0 mm
1 x Conector JR Servo male (10 pcs)
2 x Carbon fiber rod 3.0 mm x 1000 mm
1 x Cable grommet Ø 4 mm (4 uds)
1 x Nylon hinge 20x20x0,3 (10 pcs)
1 x Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm
1 x Conector AS150 7mm antichispazo (Set: 2 pares)
1 x Towing hook <3m
2 x 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x 2 mm male connector (2 pcs) with safety connector
1 x Carbon fiber rod 16 mm x 1000 mm
1 x Connectors banna oro 2 mm (M/F) (ultralight)
1 x Connector CAN 15
1 x Conector JR Servo male (50 pcs)
2 x Medium pin type hinge (12 uds)
1 x Pin hinge 34x16 mm (10 uds)
1 x Carbon fiber rod 0.5 mmx1000 mm
1 x Tow hook for tug
1 x 3,2 mm Prop Adapter M6
1 x 300x4 mm M4 shaft ship
1 x 3,2 mm Prop Adapter M6
2 x 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x Conector FUTABA Servo male (10 pcs)
2 x Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x Wings Bags JEEMO
1 x 80 mm rods set for direction control
1 x Nylon hinge 20x15x0,3 (10 pcs)
1 x Carbon fiber rod 14 mmx1000 mm
1 x Conector FUTABA Servo female (10 pcs)
2 x Mini DART 2 F3K carbon light 1m Green
1 x 25,0 mm 3-BL M4 hydro-propeller (rigth hydropropeller)
1 x Chili Race F3K (aramid nose)
2 x Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x 14 mm portholes (10 pcs)
1 x 250 mm / 16 mm Airbrakes
1 x 28 mm turnbuckle
1 x JEEMO Kit ARF Basic (2 color) - XTRALIGHT
1 x Carbon fiber rod 10 mm x 1000 mm
1 x Conector XT-30 (macho)
1 x Aluminum Bayonet / strongal D25 mm / 1 m
1 x 67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x 45 mm rods set for direction control
1 x Carbon fiber rod 2.5 mmx1000 mm
1 x Carbon fiber rod 20 mmx1000 mm
1 x Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x Conector JR Servo female (10 pcs)
1 x 12 mm mast holder
1 x Pin type hinge Al 4,5x70 mm (2 pcs)
1 x Carbon fiber rod 1.5 mm x 1000 mm
1 x Civilian pilot "Gramps" size 9cm (Slimline)
1 x Piloto WWII USAAF 12" Scale 1/6 - 1/5
1 x 1/7 Pilot "Japanese"
1 x 1/6 Pilot "Cindy"
1 x Militarian pilot "Kamikaze" size 9cm (Slimline)
1 x 1/12 Pilot "Cougar"
1 x Pilot WWII US Navy Pacific 12" Scale 1/6-1/5
1 x Remolcador "Jonny Hafenschlepper"
1 x 42,0 mm propeller (left propeller)
1 x FOX 3000 mm, Fuselage (FMS)
1 x 36,0 mm propeller (rigth propeller)
2 x ALBATROS 3.0 m (orange/white)
1 x DLE 55 carburetor
1 x 290x4 mm M4 shaft ship
1 x Distanzstück motor OS 120 AX
1 x Challenger ARF (Top Model)
2 x LENTUS Multiplex Landig gear retract
2 x Fascination 3600 mm, Canopy (Top Model)
1 x ENIGMA ARF
1 x Gasket electric Fuel Pump
1 x LENTUS Multiplex Propeller 8x6
2 x Q-12 X-light 2000 mm Electric
1 x 67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x 18 mm reinforced hinge
1 x Conector JR/Uni Servo male BLUE silicon (10 pcs)
1 x XH male balance (2S) connector (2 pcs)
1 x Conector XT-30 (hembra)
1 x Servo ROBBE FS-31 Pico Servo
1 x Wing connector 8pin with pin strip, plug & socket
1 x XT-90 connector (pair)
1 x Blue aluminium servo arm V2-Hitec 1,5 inch M3
1 x 100 mm rods set for direction control
1 x Press fitting for 1,0 diam. steel cable (10 pcs)
1 x XH male balance (4S) connector (2 pcs)
1 x 800TVL CMOS camera for FPV
1 x Servo HITEC D941 TW
1 x Gear set HITEC HS-645MG/5645MG/5685MH
1 x Servo HITEC HS-45 HB
1 x Servo inverter
1 x Gear set HITEC HS-125MG/5125MG
1 x Turbine CHEETAH 160 SE
1 x Hovercraft sailcloth
1 x Pitts Muffler kit for CAP 21
2 x Ka 8 B (Top Model)
1 x Giant Scale Muffler D.A. 70
2 x ORCA C64 Pro V 3.6m
1 x Ion Pro NG electric with flaps GREEN Fluor (JP Model)
1 x Gracia (Top Model)
1 x Airtop balloon pneumatic wheels ø160 mm with bearing. 1 pair
1 x Electric Fuel Pump 12V
1 x KAVAN Hand crank fuel pump
1 x 70x23 Ø3.5 mm aluminium core wheel
1 x SUPER DIMONA TC-80
1 x White Thread 0.50 mm x 20m
1 x Pin type hinge Al 3,0x50 mm (2 pcs)
1 x 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x Gates hinge 30x16 mm (2 pcs)
1 x Z Spinner (CN) 38mm
1 x White spinner propeller pleg. 42 mm / 5 mm
1 x White spinner propeller pleg. 55 mm / 6 mm
1 x Top light bright 10mm/3V (2 pcs)
1 x Gates hinge
1 x Ventilation grid 17x62 mm (5 uds)
1 x Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x Small pinned hinge (12 uds)
1 x Jeemo Dolly
1 x Fuselage Bags JEEMO
1 x Red aluminium servo arm V1-Futaba 1,25" inch M3
1 x Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
1 x Wing conexion 2 servos JR/Graupner 50 cm
1 x Double aluminium servo arm V1-Hitec 2,5 inch M3 (blue)
1 x Gold aluminium double servo arm V3-JR 3.5 inch M3
1 x Conector JR Servo female (50 pcs)
1 x Conector MR-60 (pareja)
1 x Conector Servo female 4 pines
1 x Conector MT-60 (pair)
1 x Towing hook
1 x XT-60 connector (male)
1 x XH LiPo extension lead
1 x USB programador GO servos
1 x XH female balance (5S) connector (2 pcs)
1 x Connectors banna oro 4 mm (M/F)
1 x Servo Robbe FS 525 BB MG HV
1 x XH female balance (2S) connector (2 pcs)
1 x Servo arm with 6 mm hole to FEMA 9800A
1 x Adjustable launching hook
1 x Servo Robbe FS 128 BB MG HV Digital
1 x Brazo servo aluminio HITEC HS-125MG/5125MG
1 x Gear set HITEC HS-56 HB
1 x Program 5v SIO RS 232
1 x BOOMERANG II 40/46 ARF 1.55mm
1 x CARBON CUB FX-3 100-200CC ARF, 165" - 4200 mm (Hangar9)
1 x SCANNER 46-55 Sport Scale 1:7 ARF
1 x Pin hinge 26x11 mm (10 uds)
1 x Fast'n EZ-CA-Hinge, lite (12 uds)
1 x 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x Carbon fiber rod 0.8 mmx1000 mm
1 x HPP-21 PLUS PC and Field Programmer for Hitec Digital Servos
1 x 20x15 Falcon electric V2
2 x THERMIK DREAM 3.000 mm (Topmodel)
1 x FOX 3000 mm ARF (FMS)
1 x THERMIK XXXL 4,9m CFK Electric
1 x THERMIK XXXL 4,9m D-Box Electric
1 x Fascination 3600 mm (Top Model)
1 x TAKEO 3.6m electric
1 x Fournier RF-4D
1 x 64x20 mm (2.5") Type jets aluminium core wheel
1 x 170x54 mm SLH KOVO wheel with bearing and metal hub
1 x 110x55 mm C SLH KOVO wheel
1 x 76x23 Ø3.5 mm aluminium core wheel
1 x Propeller POWER-PROP 7x7
1 x DUBRO - BOLTON PRESSURE FITTING 6-32 (1 PC)
1 x Wheel collar 5 mm Ø (4 uds)
1 x DUBRO - 102MM / 4" DIA BIG WHEELS (400RV) - 2PCS
1 x PowerBox Smokepump
1 x 127x43 Ø6.0 mm aluminium core wheel
1 x Smoke pump RCEXL
1 x 4" - 102 x 45 mm Ø5 mm aluminium core wheel
1 x 58x20 mm (2.25") axle Ø5 Type jets mm aluminium core wheel
38,846.47EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies