1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Servo NARO Max Std
1 x 
1 x 2000A 12V Lithium Jump Starter with 150PSI Air inflator
4 x Screw M3x16
2 x Washer 2.2×4
1 x Raer wall
3 x Ball joint long
2 x Head core
2 x Blade holder upper
2 x Blade holder center GFK 0,5 mm
2 x Side Plate
4 x Steering lever
2 x Rudder
2 x Head runner
2 x Head lower part
3 x Side rudder
2 x Nut M2
1 x Wheel keeper washer
5 x Baering 3x8x4
1 x Head spacer
1 x Battery plate
3 x Tail boom
3 x Blade holder lower
2 x Screws flush mount M2
1 x Bearing 3x6x2,5
4 x Screws M1,6x6 Allen
2 x Rotorhead pushrod
2 x Head core bushing
2 x LA500 freewheel bearing
1 x Hovercraft sailcloth
1 x 800TVL CMOS camera for FPV
1 x Oracover Brown 2 m
1 x Extra long horn 60x30
1 x Horn mando small (2 pcs)
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x Ply-Span 450x600/13g White
1 x LOWER TOW HOOK
1 x Oracover CHROME 2m
1 x Cable with accesories
1 x Oracover Yellow CADMIO 10 m
1 x 5 mm M2 variable horn
1 x Oracover Azul 2 m
1 x Monokote ROJO misil (1.8x0.65m)
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m
1 x Glases Aspen
1 x Oracover Red 2 m
1 x USB Mini Camera endoscope
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x Ply-Span 450x600/13g Orange
1 x Oratex Natural White 20m
2 x Actuador lineal HLS12-100210-7.4v
1 x Breatex™ Non-woven absorber 150 g/m² Roll 5 m
1 x Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m
1 x Carbon fibre sandwich sheet 350x150x3 mm
1 x ABS 500 x 400 x 0,5 mm (white)
1 x Oracover Azul Cielo 2 m
1 x Papel japones 12 grs/m2 760x510 mm JAPICO
1 x Extractor piñones 2.3/3.2 mm
1 x Xplorer4 anemometro
1 x Brass control horn M4 short for wire (10pcs)
1 x Oratex Natural White 2m
2 x Adjustable launching hook
1 x Horn 6/27 with M3 Bearing
1 x ABS 500 x 400 x 1,5 mm (white)
1 x 20 mm carbon horn
1 x Horn micro type4 Ø 0,5 (2 pcs)
1 x Monokote BLUE metalizado (1.8x0.65m)
1 x Steel Screw M1x8 (10 pcs)
1 x Oracover ROYAL RED 2m
1 x Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
1 x Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC
1 x M3 Maxi ball link (2 uds)
1 x M3/5 Diam metal short ball link V3 (2 pcs)
1 x Extension silicon 35 cm male (Futaba)
1 x 200m servo "Premium" wire (white/red/blue)
1 x Fiberglass heat shield Ø 6 mm 1000 mm
1 x M3/5Diam metal ball link V3 (2 pcs)
1 x Initior Receiver FRX2 Wireless
1 x Extension silicon 10 cm (Graupner)
1 x 10 mm Quick clamp_L (6 pcs)
1 x Smoke set "M"
1 x Cable S.BUS 3 salidas 300 mm
1 x Large flex hinge (12 uds)
1 x Cable set PREMIUM , fuselage/wing one4one
1 x M2/M1/6 3Diam long black ball link V1 (6 pcs)
1 x Extension S-Bus 1-2 silicon 120 cm FUTABA
1 x Green silicone 0,25 mm² wire (25 m)
1 x 0,14 mm PVC servo wire extension, ZH micro conector.
2 x M2,5 / 5Diam metal short ball link V3 (2 pcs)
1 x 200 mm extensión servo HITEC/JR
1 x Futaba male 40 cm extension
1 x "M" set
1 x Pin type hinge Al 4,5x70 mm (2 pcs)
1 x Protective Cover for wires Ø 3 mm 1000 mm
1 x Pilot Lotsenboot
1 x 29,0 mm propeller (rigth propeller)
1 x 270 mm 3/3 mm shaft ship
1 x 33,0 mm propeller (left propeller)
1 x 39,0 mm propeller (rigth propeller)
1 x 45 mm flag mast
1 x 38 mm fenders (10 pcs)
1 x 40,0 mm hydro-propeller (left hydropropeller)
1 x 14 mm Portholes for screws (10 pcs)
1 x 290 mm M4/M4 6.0x4.0 mm shaft ship
1 x 12 mm portholes (10 pcs)
2 x Spark plug key NGK MVVS
2 x Sparkplug NGK CM6
1 x Sparkplug 1/4-32 EVO 10GX
2 x Rotorshape Elevator
2 x Tail support (2 pcs)
3 x Motor wall
1 x Sparkplug 1/4-32 Glow
2 x LA500 cyclic central part
2 x Bujia OS G5 gasolina
1 x Spark motor OS Type F
4 x Nut M1,6
1 x Bearing housing
2 x Balls 4 mm
1 x Blades 330mm
2 x Head lower part New
1 x Servo FUTABA BLS175 SV
1 x L-shaped servo mount
2 x Servo FUTABA BLS172 SV
2 x Servo FUTABA BLS 276SV
1 x Servo FUTABA SBL 471 SV
2 x Servo FUTABA S 9670 SV
1 x Futaba S3010 Servo - Standard BB 0.16s/6.5kg
1 x Servo FUTABA S 3072 HV S-Bus
1 x Futaba 3010 - Gear Set
1 x Servo FUTABA HPS-A700 Digital S-Bus
1 x Futaba BLS152 - Upper Case
1 x SERVO S9177SV HV S-Bus2 Programable
1 x Servo TT ACE SHV 1504 MG
1 x Servo FUTABA S 3071 HV S-Bus
1 x Futaba S9650/9670SV - Upper Case
1 x Z-shaped servo mount
1 x Buy Perforated film 100 cm / 10 m
2 x Glass fibre sleeve Ø 20 mm X 10m
1 x Fibra vidrio 25g 110 cm/ 20m (Interglass 02034, finish FE800 pl
1 x Film release agent PVA 25 ml
1 x PVC plate 320 x 194 x 0.23 mm (brown)
1 x PVC grid straight 290x185x0.32 mm
1 x Breatex™ Non-woven absorber 300 g/m² Roll 41 m
1 x Fiberglass plate 350x150x0.3 mm
2 x Junta selladora, Tacky Tape Gris 2.75mmx12mmx15m
1 x Fibra vidrio 25g 110 cm/ 100m (Interglass 02034, finish FE800 p
1 x Glass fabric 390 g/m² aero,10x1m
1 x Buy Perforated film 100 cm / 50 m
1 x USB Interface REVOLECTRIX for CellPRO 10s
1 x Glass fabric 160 g/m² (Twill weave) 100 cm x 50m
1 x Charger Li Polymer Multi-Cell Multi-Rate Charger (MCMR)
1 x Connectors MPX male
1 x Fiberglass plate 350x150x1.0 mm
1 x Glass fabric 280 g/m² (twill weave) 100 cm, roll 50 m
1 x Buy Perforated film 100 cm / 20 m
1 x Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 1 m
1 x Towing hook
1 x Glass fibre sleeve Ø 20 mm
1 x Peel ply 64 g/m² (plain weave) 150 cm x 20m
1 x Panel Honeycom carbon 350x150x3.5mm
1 x Glass fabric 163 g/m² 130cmx5m (Interglas 92105, aero, finish
1 x Propeller RABOESCH M5 130 mm (4 Blades) (Left hydropropeller)
1 x Spark motor OS nº 3
1 x Fournier RF-4D
1 x Complet landing gear
1 x Piñon motor rotor LA-500
1 x Blade holder center
1 x KIRA 480-38
1 x Ball link M3 RPA's-UAV's
1 x M2,5 Diam metal ball link V3 (2 pcs)
1 x M2/M1/6 3Diam short black ball link V1 (2 pcs)
1 x M2/M1/6 3Diam long black ball link V1 (2 pcs)
1 x Socket head ball link M3 (2 uds)
1 x Short ball link M3 (6 uds)
1 x Propeller RABOESCH M4 45 mm (3 Blades pr) (Left)
1 x Propeller AERONAUT M4 50 mm (3 Blades pr) (Left hydropropeller)
1 x Propeller AERO-NAUT M4 65 mm (6 Blades pr) (Right hydropropeller
2 x Sparkplug Saito 400
1 x Styrene plate 320x120x0.5 mm
1 x Foam plastic plates (310x210x2 mm)
1 x Sparkplug Champion RCJ-7Y for ZG
1 x Sparkplug 1/4-32
1 x Spark motor OS nº 8
1 x LA500 pilot-seat set
1 x Cierva C30 simulated motor
1 x Nut M2 securing
1 x Head upper part
1 x Cierva C30 spanish decoration Stickers
1 x LA500 rotor head core
1 x Baal link 4/14/4 (5 pcs)
1 x Servo Fork
1 x Motor rotor LA-500
1 x LA500 Blades
1 x LA500 front gear holder
1 x PYRO 750-50L
1 x KIRA 400-27
1 x KIRA 500-36 6,7:1
1 x KONDOR 15-92
1 x XPower XC4226/12 LS
1 x XPower XC3522/5 LS
1 x PYRO 650-103 Long Axi
1 x PYRO 700-45
1 x PYRO 750-50L Competition
1 x KIRA 480-34
1 x SAVOX SH 0254 servo
1 x Release wax 250ml
1 x Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m
1 x Hardener Aero EPH 161 (500 g)
1 x Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m
1 x Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m
1 x Programador FUTABA USB CIU-3
12,760.53EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies