Top » Catalog » Motors & Turbines » Explosion » Gasoline » SAITO » AE710099

1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
    Oils/Smoke Liquids
    Gasoline->
      DA
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NGH motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      Spare DA
      Spare parts DLE
      Spare parts MVVS
      Spares Zenoah/ZG
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesories/Muflers
    Glow->
  Turbines->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

22x12 Falcon electric
105.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Round Rod 1,25x1000 mm
1 x	Strip 1,5x1,5x330 mm
1 x	Strip 3,5x1,75x330 mm
1 x	ABS Strip 1.5x3.0x1000 mm
1 x	ABS Strip 1.0x4.0x1000 mm
1 x	ABS Strip 1.5x4.0x1000 mm
1 x	ABS I Strip 10x5x1000 mm
1 x	Strip ABS 2.0x8.0x1000 mm
1 x	Round Rod 1,0x1000 mm
1 x	ABS Strip 1.0x3.0x1000 mm
1 x	Strip ABS 2.0x5.0x1000 mm
1 x	Round Rod 6,0x1000 mm
1 x	ABS Strip 1.5x2.0x1000 mm
1 x	ABS Strip 1.5x8.0x1000 mm
1 x	Strip ABS 2.0x3.0x1000 mm
1 x	Strip 2,5x1,25x330 mm
3 x	Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor)
2 x	SAVOX SH 0254 servo
3 x	Savox HV Brushless Servo SB-2270SG (Swashplate)
1 x	Cierre cabina aluminio Ø5, I=16 mm
1 x	Stainless steel cable Ø 0.5 mm (20 m)
2 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	Canopy Lock V1 M3 Red (2 pcs)
1 x	Locking cable tie 4.6x203 (uds)
2 x	Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x	Crimping sleeves for cable 0.70 mm (10 pcs)
1 x	1/4 Pilot "Heidi"
1 x	1/6 Pilot "Tony"
1 x	1/6 Pilot "Cindy"
1 x	Piloto WWII USAAF 12" Scale 1/6 - 1/5
2 x	Civilian pilot "Curt" size 9cm (Slimline)
1 x	Pilot JAN 1/4 Saiplanes
1 x	Piloto Jet "Red" 1/6 Scale
1 x	Piloto jet 130 mm
1 x	1/10 Pilot "Jimmy"
2 x	Civilian pilot "Pamela" size 9cm (Slimline)
1 x	1/12 Pilot "Cougar"
1 x	Civilian pilot "G-Man" size 9cm (Slimline)
2 x	Piloto Jet "Green" 1/6 Scale
1 x	1/12 Pilot "Langley"
2 x	1/4 Pilot "Mike"
2 x	Pilot WWII US Navy Pacific 12" Scale 1/6-1/5
1 x	Civilian pilot "Gramps" size 9cm (Slimline)
1 x	Piloto JET 1:3,5
1 x	1/6 Pilot "Garry"
1 x	Pilot "Goose" (Slimline)
2 x	Militarian pilot "Kamikaze" size 9cm (Slimline)
1 x	MYLAR film A350 (1000x500 mm)
1 x	Extension 90 cm (Futaba)
1 x	Propadapter for motor A60-V2
1 x	Shaft for A60-XS-V2 (112,5mm)
1 x	JETImodel Addcap 820
1 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Strip 2,0x2,0x330 mm
1 x	TX 250 mW especial GOPRO
3 x	Optical RPM Sensor
1 x	ABS Strip 1.0x5.0x1000 mm
2 x	Motor Moki S 250 cc 5 cyl with autostarter
1 x	Split M1,2x10 (10 pcs)
1 x	Tip wing protector 30x10 (2 pcs)
2 x	Cable grommet Ø 5 mm (4 uds)
1 x	Servo inverter
2 x	Servo inverter
1 x	28x5 mm wires output (2 pcs)
1 x	Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x	Steering arm 16 mm Ø 3 mm (2 uds)
2 x	Allen wheel collar M4x4
1 x	Fully Threaded Steel Rod SUS303 70mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) knurled
1 x	Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
1 x	U Profile ABS 5,0x10,0x1000 mm
1 x	Profile ABS half cane 2.5x1000 mm
2 x	Profile ABS Square 3 x 1000 mm
1 x	Streamline Stainless Steel Tubing 7.5x4.5x1000 mm
1 x	U Profile ABS 3,0x6,0x1000 mm
1 x	ABS angle 4,0x4,0x1000 mm
2 x	Profile ABS Square 2 x 1000 mm
1 x	Profile ABS Square 1 x 1000 mm
1 x	T-Connector 4.0 mm x 1000 mm
1 x	Profile ABS half cane 2.0x1000 mm
1 x	ABS angle 6,0x6,0x1000 mm
1 x	Streamline Stainless Steel Tubing 15.5x8.5x1000 mm
1 x	Short ball link M1.6 (6 uds)
1 x	M2,5 Diam metal short ball link V3 (2 pcs)
1 x	M2/M1/6 3Diam short black ball link V1 (2 pcs)
1 x	Long ball link M3 (6 uds)
1 x	SSPS105 Super Hi-Power servo
2 x	Interruptor RX/Batterie
2 x	"Y" charging 4mm wire (2 IN-1 OUT).
2 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	Female connector for 6 pines AWG
1 x	BULL MØ1 2.600mm BLUE
2 x	Fully Threaded Steel Rod alumin 50 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod Duralumin 120 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod SUS303 65 mm M3 (2 pcs)
1 x	Pushrod greyline 4/3 with coupler M3
1 x	Motor DLE 30 cc V2
1 x	ZENOAH ZG 26SC with magneto ignition
1 x	Motor UMS Radial-7-50cc gas
1 x	Cylinder-piston Assembly 30cc
1 x	Rear cover O-ring 26/30 cc
1 x	Head Gasket 30cc (3 pcs)
1 x	Motor DLE 55 RA
1 x	Carburador DA-35, DA-50R-DA-100L , VM-60/70
1 x	Piston ring for DA-85 and DA-170
1 x	Motor NGH GF 150 R5
1 x	Cylinder DA-50R, DA-100, DA-100L
1 x	Electric starter suitable for the DLE111, DLE120 and DLE85.
1 x	Ignition KOLM BX-155-2 Engine
2 x	Drilling-template set for Moki engines Moki S150, S180, S215, S2
1 x	Stainless Steel Bend D 15x0,4mm
1 x	Giant Scale Muffler D.A. 170 (2 pcs)
1 x	Tufnol Choke Lever Arm d=4,7mm
2 x	Motor Moki S 400 cc 5 cylinders
1 x	DA 70 Twin Gas Engine
1 x	DYNAMOMETER S-1580
2 x	Female connector JST SH 1.0mm with 10 cm wire
2 x	TrainerCord (master-learner)
1 x	Adapter 3,0 mm M8
1 x	2 mm Prop Adapter M5
1 x	Adapter 3,2 mm M5 for spinner 30 mm fixed propeller
1 x	Landing gear frontal support 29x26x13,5
1 x	Sparkplug Champion RCJ-7Y for ZG
1 x	Sparkplug NGK CM6
1 x	Connector CAN 15
1 x	PSC 6
1 x	30 cm BEC cable (female)
1 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x	Woodruff key for DA50/85/100/150 and DA 200
1 x	Joint for DA-50 reed valv
1 x	Escape Moki 100 BVT
2 x	Motor Moki 180
1 x	Motor MOKI S 250 cc 7-cylindrer
1 x	Carburator Moki S400
2 x	Pick up for motor Moki 250 cc 7 cylinders
1 x	MOKI S250 Intake Bend
1 x	Adapter 5,0 mm M8
1 x	Aluminun wheel collar 3 mm Ø (4 uds)
1 x	Adapter 3,2 mm M8
1 x	Adapter 3,2 mm M6
1 x	Professional Servo tester
1 x	4 mm Prop Adapter M6
1 x	Fully Threaded Steel Rod M3
1 x	Tip wing protector 28x10x12 (2 pcs)
1 x	Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod alumin 60 mm M2,5 (2 pcs)
1 x	Steering arm 12 mm Ø 4 mm
1 x	Pushrod octagone 4/3
1 x	Press fitting for 0,5 diam. steel cable (10 pcs)
1 x	Locking cable tie 2.5x100 (uds)
1 x	800TVL CMOS camera for FPV
1 x	ABS "T" angle 2.0x2.0x1000 mm
1 x	ABS "T" angle 8.0x8.0x1000 mm
1 x	Profile ABS triangular 6.0x1000 mm 90º
1 x	Sparkplug 1/4-32 EVO 10GX
1 x	Sparkplug 1/4-32 Glow
1 x	Sparkplug DLE CM6
1 x	DLE 111 pipe plug
1 x	Bujia OS G5 gasolina
1 x	Male connector for 6 pines AWG
1 x	Connector Sub-D 2+5 Female
1 x	CellPRO 4S Adaptader (GP/KO up to 4S)
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	30 cm BEC cable (male)
1 x	3 LiPo XH>EH adapter
1 x	Copper lacquer wire Ø0,2 mm (5 m)
1 x	PSC 5
1 x	CC 03
1 x	Prolonguer for Balancer Thunder Power 6S
1 x	USB interface ALTIS
1 x	Black copper lacquer wire Ø0,2 mm (5 m)
1 x	Male Prolonger TP 4/5S
1 x	4 LiPo XH>EH adapter
1 x	Red copper lacquer wire Ø0,2 mm (5 m)
1 x	2 LiPo XH>EH adapter
1 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x	Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x	CC 01
1 x	Fully Threaded Steel Rod M2,5 (2 uds)
1 x	41x5,5 mm wires output (2 pcs)
1 x	Clip fixing for wing (2 pcs)
1 x	250 mm / 16 mm Airbrakes
1 x	Cockpit aluminium closing
1 x	140 mm rods + T patellas set for direction control
1 x	Wing bolts M6 Steel screw Red (2 pcs)
1 x	Gasket carburetor carrier->crankcase DA-85 DA-100L DA-120 DA-200
1 x	Carburetorgasket DA-85, DA-100, DA-100L and DA-120
1 x	Gasket, Carburetor DA-150/170
1 x	Gasket for motor DA 50-R
1 x	Metal gasket elbow/cilinder DA60R/DA120
1 x	Gasket, from red carb carrier to crankcase DA-150L/170
1 x	Reed valves with doubler, set for DA 85/100/120
2 x	Flange gasket MOKI carburetor
1 x	Motor DA 50-R
1 x	Pilot "Anthony" (Slimline)
1 x	SCHARNHORST Battleship 1:200
2 x	Moki Carburetor Throttle Arm with Extension
2 x	Baffles for Radial Moki S180/320 mm
1 x	Motor Moki S 300 cc 5 cylinders
1 x	1/7 Pilot "Japanese"
2 x	Motor MOKI 160 BVT boxer 4-stroke
1 x	Carburator gasket MOKI
1 x	Moki Exhaust Bend 50VT
1 x	Carburator Moki S 180
1 x	Carburator Moki S250
1 x	Motor MOKI S 350 cc 7 cylinder
1 x	Baffles for Radial Moki S250/330 mm
1 x	Motor Moki S 250 cc 5 cylinders
1 x	Motor Moki 100 BVT

69,180.32EUR