Top » Catalog » Motors & Turbines » Explosion » Gasoline » SAITO » AE710099

1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
    Oils/Smoke Liquids
    Gasoline->
      DA
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NGH motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      Spare DA
      Spare parts DLE
      Spare parts MVVS
      Spares Zenoah/ZG
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesories/Muflers
    Glow->
  Turbines->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

16x8 BIELA propeller (3-blades) Pusher
68.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

2 x	Windsock Ozone L - 700 mm
2 x	Wing OXY 5,0 m2
1 x	Opale Rucksack
1 x	Receiver Crystal 35 Mc/s Ch 62
2 x	Parachute BACKUP X100
1 x	Crystal Universal RX 35.170 Ch 77
1 x	Crystal Universal RX 35.050 Ch 65
2 x	Crystal Universal RX 35.090 Ch 69
2 x	Paramotor BackPack XXS (without accessories)
3 x	Windsock Ozone L -1200 mm
1 x	Para-RC "RC-Evo-Cross" Rescue
2 x	Rescue 1,8m2 / BackPack
1 x	Trike XL motor set (motor+esc+prop)
1 x	Transmitter Crystal 35 Mc/s Ch 77
2 x	Transmitter Crystal 35 Mc/s Ch 62
1 x	Propeller POWER-PROP 14x9
1 x	Paramotor Trike XL
1 x	Paramotor BackPack XXS 2
1 x	Parachute PV6 for F3J
1 x	Swashplate metal LAMA
1 x	SE Ring 480 mm (2 pcs)
1 x	ABS "T" angle 10.0x10.0x1000 mm
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x	Spray Graphit 33
1 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x	Adjustable launching hook
1 x	Support Pitot JETI
2 x	Support Filtro FESTO
1 x	Foil for sticking flaps and ailerons
1 x	Extension 30 cm (Futaba)
1 x	Extension silicon 30 cm female (Futaba)
1 x	Universal Colour Paste deep black 250 g
1 x	SE Ring 300 mm (2 pcs)
1 x	SE Ring 450 mm (2 pcs)
1 x
1 x	Cabel "Y" 30 cm (Futaba)
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x	Strip 2,0x2,0x330 mm
1 x	2 mm male connector (2 pcs) with safety connector
1 x	Plasti Dip Liquid Tape 429 ml black
1 x	Pasacables rectangular 40x15 mm (4 pcs)
1 x	Profile ABS half cane 8.0x1000 mm
1 x	Spannlack 1000 ml
1 x	Rubber profile 6-2 mm 2M
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x	PARTALL® Hi-Temp Wax, 340 g
1 x	Extension 100 cm (Futaba)
1 x	Carbon Non-crimp ST 100 g/m² 50 cm x 10 m
1 x	Jeti Black cap
1 x	ABS angle 10,0x10,0x1000 mm
1 x	Profile ABS triangular 6.0x1000 mm 90º
1 x	Carbon fibre sleeve 12k 170 mm x 5m
1 x	Ring 320 mm length (5 pcs)
1 x	Futaba male 40 cm extension
2 x	T-shape holder metal LAMA
1 x	Propeller balancer
1 x	ABS I Strip 10x5x1000 mm
1 x	Extension PVC 150 cm (Graupner)
1 x	Truck-trailer for gliders 720 x 285 mm
1 x	Round Rod 6,0x1000 mm
1 x	Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm
2 x	Conector JAPAN G2 Set 5 pares
1 x	Support Flush MPX Conector (6 pcs)
1 x	Conector BEC female (10 pcs)
1 x	Plasti Dip Liquid Tape 429 ml black
1 x	ABS angle 3,0x3,0x1000 mm
1 x	Futaba Female 40 cm extension
1 x	Plasti Dip Liquid Tape 429 ml orange
1 x	Tape GFK 38 mm
1 x	Release wax 250ml
1 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x	Marker ties (20 pcs)
1 x	Cable S.BUS 3 salidas 100 mm
1 x	Round Rod 1,5x1000 mm
1 x	Conector JR Servo male (10 pcs)
1 x	ABS Strip 1.5x3.0x1000 mm
1 x	Spikes Band (5 m)
1 x	Strip ABS 2.0x10.0x1000 mm
1 x	Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x	Support conector MPX (6 pcs)
1 x	Premium servo extension 100cm
1 x	Round Rod 1,25x1000 mm
1 x	Strip ABS 2.0x8.0x1000 mm
1 x	30 cm DEANS female connector
1 x	20x1000 mm Ring Strap Back To Back
1 x	ABS I Strip 20x10x1000 mm
1 x	Black copper lacquer wire Ø0,2 mm (5 m)
1 x	Horn 5/15 with M2 Bearing
1 x	Threaded coupler Micro M2 Ø 0,8 (10 pcs)
1 x	APM2.6 Power module with 5.3V DC BEC
1 x	ORACOVER Fluor red (2 m)
1 x	Adapter lead MPX/EC3
1 x	Ply-Span 450x600/13g Yellow
2 x	USB Interface REVOLECTRIX for CellPRO 10s
1 x	Horn 16,5x20 mm (2 pcs)
1 x	Digital scale up to 40 kg
1 x	MYLAR film A350 (1000x500 mm)
1 x	Z Bender - S Type Tool
1 x	6 mm red aluminium threaded horn with patella
1 x	Fast'n EZ-CA-Hinge, lite (12 uds)
1 x	Beech dowels 10 mm x 1000 mm
1 x	1,5x50 mm allen screwdriver
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	BALSA triangular 6x6x1000 mm
1 x	CC 02
1 x	Oracover Yellow CADMIO 10 m
2 x	Big-Malibu XL Roof box with surfboard rack GREY
1 x	V tail SILENT DREAM 2.200 mm (Elec or Glider)
1 x	MAX pilot ARTF
1 x	Para-RC Mix
1 x	Propeller MENZ-S 18x12
1 x	Propeller 8x4,3 SlowFlyer
1 x	Propeller MENZ-S 18x10 3-Blades
1 x	FALCON 29X9 CARBON PROPELLER (GAS)
1 x	Carbon blade 3D 230 mm
1 x	Aluminum Bayonet / strongal D25 mm / 1 m
1 x	Support pump Xicoy X45
1 x	Conector AS150 7mm antichispazo (Set: 2 pares)
1 x	EC5-Set male, simple quality, 2 x female pin, 1 x blue housing
1 x	Connectors banana oro 6,0 mm Ultralight (M/F)
1 x	Extension silicon 50 cm (Futaba)
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 20m
1 x	Towing hook <3m
1 x	Extension silicon 75 cm (Futaba)
1 x	Towing hook
1 x	Propeller MASTER 6x3
1 x	Propeller MASTER AIRSCREW 13x6
1 x	Cable silicona macho batt. receptor 30 cm (Graupner)
1 x	Charger Li Polymer Multi-Cell Multi-Rate Charger (MCMR)
1 x	ULTRA STICK 30 cc ARF
1 x	Epoxy Resin HT 2 + Hardener HT 2 (60 min) 1 kg
1 x	Epoxy Resin L 285 + Hardener 386, kit/ 1.35 kg
1 x	11 mm wing servo holder
1 x	Futaba 2x20 mm servo double arm
1 x	Hitec 20 mm servo arm
1 x	Futaba 38 mm servo arm with ball link
1 x	Futaba 38 mm servo arm
1 x	Hitec 25 mm servo arm with M3 ball link
1 x	Vess propeller 12x7 S
1 x	Hitec 38 mm servo arm
1 x	17 mm servo arm with ball link DES Graupner
1 x	Propeller MENZ-S 19x8 3-Blades
1 x	Servo KST X15-1208 V8.0 13.5Kg HV
1 x	Servo KST A08H V6.0 3,2Kg HV
1 x	Conector Servo female 4 pines
1 x	Connector CAN 15
1 x	Retract undercarriage
1 x	Servo KST X20-7512 V8.0 82kg 8.4v
1 x	FALCON 26X10 CARBON PROPELLER (GAS)
1 x	Coversion set HIROBO EX/EAGLE elektro
1 x	Shaft sleeve LAMA
1 x	Carbon blade 230 mm
1 x	Blade holder metal LAMA
1 x	Banna gold connector 2,5 mm (M/F)
1 x	Streamline Stainless Steel Tubing 17.8x12.4x1000 mm
1 x	Extension silicon 30 cm female (Graupner)
1 x	Glass fibre sleeve Ø 20 mm
1 x	Profile ABS triangular 4.0x1000 mm 60º
1 x	Profile ABS triangular 4.0x1000 mm 90º
1 x	Profile ABS half cane 6.0x1000 mm
1 x	Propeller MASTER 5,5x4,5
1 x	HV6150 Digital Servo
1 x	U Profile ABS 5,0x10,0x1000 mm
1 x	Streamline Stainless Steel Tubing 7.5x4.5x1000 mm
1 x	Peel ply 64 g/m² (plain weave) 150 cm x 10m
1 x	Propeller POWER-PROP 11x9
1 x	Streamline Stainless Steel Tubing 10.5x5.7x1000 m
1 x	Extension silicon 35 cm (Futaba)
1 x	Propeller MASTER 6x3,5
1 x	Colormatic 2K Soft fine putty white, 1 kg
1 x	Glass fabric 80 g/m² (plain) 100 cm, roll/ 20 m Aero Finish
1 x	Aluminium tube with fibreglass case ø35x1.5mm, 1m
1 x	CellPRO 4S Adaptader (GP/KO up to 4S)
1 x	EXTRA NG 74" white/red/blue (Skywing RC)
1 x	ULTRA STICK 10 cc ARF
1 x	EDGE 540-A 74" (1880 mm)
1 x	EDGE 540-A 105" (2660 mm)
1 x	SLICK 360-A 104" (2640 mm)
1 x	PITTS CHALLENGER 87″ 2.20m (120cc) 03 ARF
1 x	Mould Resin P + Hardener EPH 161-P, kit/ 585 g
1 x	TA1200 Charger Compatible with Smart and Standard LiPo Batteries
1 x	White gelcoat 1 Kg
1 x	MEKP Harderner 100 g
1 x	Cargqador GensAce IMARS III Pro Smart Balance RC
1 x	Charger GensAce IMARS Dual Channel AC200W/DC300Wx2
1 x	Glow starter with charger 230v

17,324.55EUR