5 x | Connector Sub-D 2+5 Male |
3 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
2 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
3 x | APM2.6 Power module with 5.3V DC BEC |
2 x | 2 LiPo XH>EH adapter |
3 x | CC 03 |
1 x | 3 LiPo XH>EH adapter |
1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
2 x | 5 LiPo XH>EH adapter |
2 x | Connector Sub-D 2+5 Female |
2 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
2 x | Circlick securite |
3 x | CM-3 |
4 x | CC 01 |
2 x | "Y" charging 4mm wire (2 IN-1 OUT). |
4 x | 30 cm BEC cable (female) |
1 x | Dean "T" - Futaba Adapter |
1 x | BEC 3A FOXY |
3 x | UBEC 6A KAVAN |
4 x | 4 LiPo XH>EH adapter |
4 x | CC 05 |
3 x | Copper lacquer wire Ø0,2 mm (5 m) |
3 x | Black copper lacquer wire Ø0,2 mm (5 m) |
3 x | CC 02 |
1 x | Double conector with JR adapter and 200 mm extension |
1 x | Cabel charger transmitter GRAUPNER |
3 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
1 x | Red smoke bombs AX-60 (5 pcs) |
1 x | Initior Transmitter FTX2 Wireless |
1 x | Yellow smoke canister 100 g |
1 x | Red smoke canister 65 g |
1 x | AX-60 starters (5 pcs) |
1 x | Blue smoke canister 100 g |
1 x | Red smoke canister 140 g |
1 x | Yellow smoke bombs AX-60 (5 pcs) |
1 x | Ventral support for AX-18/AX-60 |
1 x | White smoke bombs AX-3 (10 pcs) |
1 x | Initior Receiver FRX2 Wireless |
1 x | Green smoke canister 65 g |
1 x | "S" set for boats |
1 x | Red smoke canister 100 g |
1 x | AX-60 starters (5 pcs) |
1 x | Green smoke canister 140 g |
1 x | Blue smoke canister 140 g |
1 x | "S" set for planes |
1 x | Mixers smoke bombs AX-60 (5 pcs) |
1 x | White smoke bombs AX-18 (5 pcs) |
1 x | Electric rocket starters (6 pcs) |
1 x | MPX-Dean "T" Adapter |
3 x | Bec MR UBEC 5A (5v/6v/7v) |
2 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
1 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
2 x | TP/TopFuel - JST-EH 4/5S Adapter |
1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
1 x | JETImodel SINGLE BEC |
1 x | Adapter lead MPX/EC3 |
2 x | Glases Moritz |
1 x | Glases Innovation Plus |
1 x | Zurich Sport Sunglasse Dark Sensity BROWN Glasses |
1 x | Horn 5/15 with M2 Bearing |
1 x | Horn 13,5x16 mm (2 pcs) |
1 x | LH long aluminium horn L31xH30 (2pcs) |
1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | LH long black aluminium horn L31xH30 (2pcs) |
2 x | 6 mm blue aluminium threaded horn with patella |
1 x | Small aluminium horn red (2pcs) |
1 x | Brass control horn M4 short for wire (10pcs) |
1 x | Small aluminium horn gold (2pcs) |
1 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | PowerBox SparkSwitch RS |
2 x | SPS 70V 100/200 A |
1 x | Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm) |
2 x | ABS tube 3.0x2.0x330 mm |
2 x | MAX BEC 2 |
3 x | ABS tube 3.0x1.0x1000 mm |
1 x | CF tube set (Ø 38 mm y Ø 14 mm) |
1 x | ABS tube 18.0x16.0x1000 mm |
3 x | PSC 6 |
1 x | ABS tube 9.0x7.0x1000 mm |
1 x | Extension 2/3 lipos JST/C |
2 x | SPS Remote switch actuator |
1 x | Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm) |
2 x | Multi-adapter balancer JST/C - TP |
1 x | Opto Gas Engine Kill Switch |
2 x | Extension 5 lipos JST/C - JST |
3 x | CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm) |
3 x | Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
2 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
1 x | ABS tube 6.0x5.0x1000 mm |
2 x | DPSI magnetic switch actuator (housing) |
4 x | SWTU2 switch |
1 x | ABS tube 8.0x6.0x1000 mm |
1 x | Long Switch On/Off micro |
2 x | SBEC 30 D |
1 x | ABS tube 9.0x8.0x1000 mm |
1 x | ABS tube 16.0x14.0x1000 mm |
1 x | ABS tube 3.0x2.0x1000 mm |
1 x | ABS tube 5.0x4.0x1000 mm |
1 x | ABS tube 2.0x1.0x1000 mm |
1 x | ABS tube 10.0x8.0x1000 mm |
3 x | PSC 5 |
2 x | Male prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
1 x | ABS tube 5.0x4.0x156 mm |
2 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
2 x | Opto Gas Engine Kill Switch |
1 x | ABS tube 8.0x7.0x1000 mm |
2 x | SBEC 40 |
1 x | ABS tube 14.0x10.0x1000 mm |
3 x | Interruptor SPS 70v 60/120A |
1 x | Extension 6 lipos XH > EH |
3 x | Male/Female prolonguer for Balancer Thunder Power 6S |
1 x | Pins M connect Multipin connectors AWG 20-24 |
1 x | SBEC Jeti |
1 x | Thinwall Stainless Steel Tubing 28x0.6x1000 mm |
2 x | Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm) |
2 x | ABS tube 5.0x3.0x1000 mm |
3 x | Interruptor SAFET-SWITCH 12HV Twinbatt |
2 x | ABS tube 20.0x18.0x1000 mm |
2 x | Switching module high voltage SXH |
2 x | Extension 2/3 lipos JST - JST/C |
2 x | ABS tube 12.0x10.0x1000 mm |
1 x | MAX BEC |
2 x | USB interface ALTIS |
2 x | EWC6 40 cm wing connector |
1 x | Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm |
1 x | 20 g tin paste |
1 x | Carbon fiber rod 16 mm x 1000 mm |
1 x | Electric spoiler 300 mm (2 pcs) |
1 x | Cockpit metalic closing |
2 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
2 x | Magnetic Interruptor MULTIPLEX |
2 x | Extension 5 lipos JST - JST/C |
1 x | SPS 70V 140/280 A |
2 x | Interruptor RX/Batterie |
1 x | Multi-adapter balancer JST - TP |
1 x | Extension 5 lipos JST/C |
1 x | wing/fuselage connector for 16 pines AWG 20-24 |
1 x | B4-0 rocket charges (6 pcs) |
1 x | Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm) |
2 x | DPS Switch JR/JR |
2 x | SPARK Switch 5.9v |
2 x | Three-position switched channel, short |
1 x | Glases Flitemaster |
1 x | Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses |
1 x | Glases Nimbus "Black" |
1 x | Glases Ace |
1 x | Glases Stratus |
1 x | Glases Aspen |
2 x | Horn mando long (2 pcs) |
2 x | Horn micro type4 Ø 0,5 (2 pcs) |
1 x | Small adjustable aluminium control horn with bearing 2,8x15 |
1 x | Antenna 50 mm (2 uds) |
1 x | Railing Ø 2mm (20 pcs) |
1 x | SCHARNHORST Battleship 1:200 |
1 x | Horn DUBRO 1/2A |
1 x | Tirpiz Battleship 1:200 |
1 x | DIVA cabin cruiser |
2 x | Selfstart electronic switch |
1 x | PVC 0,25 qmm servos wire Graupner (5 m) |
2 x | TrainerCord (master-learner) |
1 x | Silicone 0,50 qmm servos wire Futaba (100 m) |
1 x | PVC 0,14 qmm servos wire Graupner (100 m) |
1 x | Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC |
1 x | PVC 0,35 qmm servos wire Graupner (100 m) |
1 x | 1 m servo "Premium" wire (white/red/blue) |
1 x | Silicone 0,14 qmm servos wire Graupner (100 m) |
2 x | TP/TopFuel - XH 2/3S Adapter |
1 x | Rigid coupling brass Ø 5.0 / 4.0 mm L: 25 mm |
1 x | Rigid coupling brass Ø 4.0 / 3.2 mm L: 25 mm |
1 x | Coupling bush 5 - 5 mm |
1 x | Anchor of tow Met. 60 mm |
2 x | Sistema LDS - Ø12 mmr servos Ø 6/25 spline 60º (Futaba) pitch 6 |
1 x | Anchor 50 mm (2 uds) |
2 x | 6 mm M3 variable horn |
1 x | La Capitania di Venetia accesories |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch |
1 x | ALPHA 1000mm BL ARTR |
1 x | Barandilla Ms 10x250 mm (2 pcs) |
1 x | Ancla Met. 16 mm (5 pcs) |
1 x | Brass control horn M2 large for wire (2pcs) |
1 x | Micro control horn (2 pcs) |
1 x | Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø7.1 m) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø20 mm, Ø18 mm) |
2 x | ABS tube 6.0x4.0x1000 mm |
1 x | Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm) |
2 x | Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm) |
1 x | Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm) |
1 x | Carbon tube 3K-Matt (L 1000 mm, Ø25 mm, Ø23 mm) |
1 x | Size "M" motor holder for class 400 |
1 x | Motor mount for 1200 mm models |
2 x | Frontal support Speed 600 |
1 x | Combo KAVAN PRO 3536-1000 + RAY 40 SB |
1 x | Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB |
1 x | Motor OS 3805-1200 electric |
1 x | Connector CAN 15 |
1 x | Cooler motor type 400 |
2 x | A50 Motor Mount Alu complete set |
2 x | Receiver bed (Blue) |
1 x | Size "L" motor holder for class 600 |
1 x | Motor holder for AC 28/7 |
2 x | Fiberglass motor-holder for electric motors |
3 x | Cables suitable for the motor AC 28/7 |
2 x | Threaded coupler M2 (10 pcs) |
1 x | Central support Speed 280 |
1 x | Fan for A60 |
2 x | Radial heatsink for MPJ AC25/35-xx motor |
1 x | Central support Speed 600 |
2 x | Motor mount for 1 m models |
1 x | A60 Motor Mount Alu complete set |
1 x | Frontal support Speed 280 |
1 x | Motor holder AXI |
1 x | Hacker A30-S Radial Set |
2 x | Cooler motor type 300 |
1 x | Size "M" motor holder for class 600 |
1 x | Bearings for motor HACKER C50 |
1 x | PWC4 wing/fuselage connector for 4 servos |
1 x | Switc electronic 30 Amp |
1 x | bavarianDEMON USB cable |
1 x | JETImodel DPS 40 |
2 x | 30 cm BEC cable (male) |
1 x | GPS, Vario and altitude Sensor SBS-01G |
1 x | DJI FPV Combo |
1 x | DUPLEX 2.4EX Central Box 220 |
1 x | Hacker X-Pro USB interface V2 |
1 x | GPS Expander Module |
1 x | Male connector JST SH 1.0mm with 10 cm wire |
1 x | Female connector for 20 pines AWG |
2 x | Male connector for 20 pines AWG |
1 x | Female connector for 6 pines AWG |
1 x | Female connector JST SH 1.0mm with 10 cm wire |
1 x | Female connector for 10 pines AWG |
1 x | TS832 to Gopro AV/Power Cable DJI Phantom 2 Compatible |
2 x | Battery charging cable XT60 |
1 x | Electronic switch JETI SP6 0-15v/6A |
1 x | Male connector for 6 pines AWG |
1 x | Cabling for Fox MDM1 wings |
1 x | Servo slow down unit (0,7-14,7 sec ) |
1 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
1 x | Helices DJI Mavic Air 2 STEALTH "Black" (4x Ud) |
1 x | Boat vents 10mm (2pcs) |
1 x | Cabestrante plastico 5x6 mm (10 pcs) |
1 x | Block 1Rolle 3x7x3 mm (5 pcs) |
1 x | Anchor 25 mm (2 uds) |
1 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
1 x | Propeller APC 11x8.5 Electric |
1 x | Futaba 20 mm servo arm |
1 x | Carbon tube 3K (L 1000 mm, Ø 8 mm, Ø 7 mm) |
1 x | Carbon tube (L 1000 mm, Ø8 mm, Ø6 mm) |
1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm) |
1 x | Receiver RFA05 5Ch compatible FUTABA |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 6 mm |
1 x | Propeller diller for DLE111 and DA85-150 |
1 x | Brass wire 0.5 mm (25 m) |
1 x | Long adjustable aluminium control horn with bearing 2,8x15 |
1 x | 6 mm aluminium horn with patella |
1 x | Horn for flap control (1 pcs) |
1 x | Sheave Pl. 2R. 3 mm |
1 x | 5 mm M2 variable horn |
1 x | Propeller APC 10x5.5 MR Electric multirrotor PUSHER |
1 x | Cable control set |
1 x | Life guard Ø 25,0 mm (2 pcs) |
1 x | Propeller APC 11x7 SF |
1 x | Propeller 3BL 50 mm M4 Plastic |
1 x | Picas 12 mm (20 pcs) |
1 x | 20 mm carbon horn |
1 x | Propeller APC 10x4.5 MR Electric Pusher |
1 x | Futaba 30 mm servo arm with M3 ball link |
1 x | Hard brass tubing (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø18 mm, Ø16 mm) |
1 x | Carbon tube (L 1000 mm, Ø4 mm, Ø3 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
1 x | Carbon tube (L 1000 mm, Ø7 mm, Ø5 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø21 mm) |
1 x | Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø18.0 mm, Ø16.0 mm) |
1 x | Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø22 mm, Ø20 mm) |
1 x | ABS tube 4.0x3.0x1000 mm |
1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm) |
1 x | Metalic motor holder for class 550-600 |
1 x | Cooler motor type 280 |
1 x | Size "M" motor holder for class 400 |
1 x | Ø 40 mm fiberglass motor-holder for electric motors |
1 x | Motor mount M |
1 x | |
1 x | Motor OS 3820-1200 electric |
|
10,331.12EUR |