186.00EUR

PowerBox Smokepump JETs 2x outside
[POWER8015]


PowerBox Smokepump JETs 2x outside
Product description

The PowerBox Smokepump has been developed by PowerBox-Systems specifically for pumping smoke oil in model aircraft. The mechanical system and electronics are manufactured on our own premises, and the unit's high standard of quality is evident from its long effective life: the PowerBox Smokepump is the world's most durable smoke oil pump, as has been demonstrated in several long-term tests.

The mechanical pump system is assembled entirely from high-quality aluminium and brass parts. All our pumps are subjected to a running-in procedure during manufacture, ensuring that the gears mesh perfectly, and that the pump is 100% leak-free. Tight manufacturing tolerances eliminate the need for a separate cut-off valve with the PowerBox Smokepump.

The electronic circuit is infinitely variable within the range 0%-100%, allowing the pilot to fine-tune the flow rate to match the exact requirements of the model. The Smokepump can be powered either by a PowerBox or a separate battery.

If a separate battery is used, the electronic circuit switches to a "stand-by" mode if the receiver fails to pick up a signal. This means that it is not necessary to provide a separate switch to isolate the PowerBox Smokepump from the battery when you switch the model off.

The PowerBox Smokepump is available in a Standard version and a Jet version, the later with higher throughput and twin outlets.

The maximum flow rate of the Smokepump (Order No. 8010) is around 750 ml./min., while the Smokepump Jet (Order No. 8015) is capable of around 950 ml. The set includes all the necessary connecting leads and a length of heat-resistant hose. The standard set also contains a Y-piece which can be used to connect both silencers of an opposed-twin (boxer) engine.

Features
Durable metal-geared pump
Infinitely variable flow rate from 0-100%
No external cut-off valve required
High maximum flow rate
Can be operated directly from the receiver power supply
Stand-by cut-off when used with separate battery
Compact design
Low current drain
Mounting facility

Technical Data
Operating voltage 4.0V - 9.0V
Current drain Power-on state approx. 1.8 Ampere at 100%
Current drain Standby 10µA
Max. flow rate max. 950ml/min
Smoke medium Smokeöl „blue Max“ or 3W Smokeöl
Dimensions 79 x 31 mm
Weight 128g
Temperature range -30°C to +75°C


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x Fixed launching hook
1 x SERVO HOLDER
1 x Towing hook <3m
1 x Tow hook for tug
1 x Towing hook
1 x ABS "T" angle 8.0x8.0x1000 mm
1 x L-Connector 1.5 mm x 1000 mm
2 x ABS angle 4,0x4,0x1000 mm
1 x ABS "T" angle 2.0x2.0x1000 mm
1 x Profile ABS Square 4 x 1000 mm
1 x ABS angle 5,0x5,0x1000 mm
1 x Profile ABS Square 3 x 1000 mm
1 x Streamline Stainless Steel Tubing 14.5x9.6x1000 mm
2 x ABS "T" angle 6.0x6.0x1000 mm
2 x Profile ABS half cane 2.5x1000 mm
3 x L-Connector 4.0 mm x 1000 mm
1 x Carbon fiber rod 8.0 mmx1000 mm
1 x Carbon fiber rod 0.5 mmx1000 mm
1 x Carbon fiber flat 1000x3.0x0.5 mm
1 x Carbon fiber rod 16 mm x 1000 mm
1 x Carbon fiber rod 0.5 mmx1000 mm
1 x Carbon fiber flat 1000x3.0x0.13 mm
1 x Carbon fiber rod 20 mmx1000 mm
1 x Squared carbon wing joinner 5x5x220 mm
1 x Carbon fiber rod 7.0 mmx1000 mm
1 x Carbon fiber rod 1.5 mm x 1000 mm
1 x Carbon fiber flat 1000x6.0x0.8 mm
2 x Carbon fiber flat 1000x3.0x1.0 mm
1 x Carbon fiber rod 12 mm x 1000 mm
2 x Carbon fiber rod 4.0 mmx1000 mm
1 x Carbon fiber rod 6.0 mmx1000 mm
1 x Motor A2212/13T
1 x Carbon fiber flat 1000x3.0x1.0 mm
1 x Carbon fiber rod 0.8 mmx1000 mm
1 x Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm
1 x Carbon fiber rod 14 mmx1000 mm
2 x Carbon fiber rod 1.0 mm x 1000 mm
1 x Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x Carbon fiber rod 3.0 mm x 1000 mm
1 x 20x1000 mm Ring Strap Back To Back
1 x ABS tube 4.0x3.0x1000 mm
1 x Fast'n EZ-CA-Hinge, lite (12 uds)
1 x Aluminium rod Ø 4.0 mm x 3000 mm
2 x Sun Cover PC 21 XXL (JMB Jets)
2 x Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x ALU servo arm 3 mm shaft
1 x Servo KST BLS825 V8.0 HV 35Kg 8.4v
1 x 25 mm carbon servo arm
1 x Servos wing assembly set HS 80/81/82/85
1 x MIG 29 3D RTF, Servo
1 x Servo KST A08H V6.0 3,2Kg HV
1 x Fast attachment for servos (25 pcs)
1 x Metal gear set for HS85MG/5085MG
2 x Servo KST X20 8.4-50 V8.0 45kg 8.4v Softstar
1 x Profile ABS triangular 6.0x1000 mm 90º
1 x Servo SAVOX SV-1261 MG
1 x U Profile ABS 5,0x10,0x1000 mm
1 x Servo SAVOX SV-1260 MG
1 x Profile ABS triangular 4.0x1000 mm 60º
1 x Rubber profile 10-2 mm 2M
1 x Streamline Stainless Steel Tubing 17.8x12.4x1000 mm
1 x Profile ABS triangular 4.0x1000 mm 90º
2 x Servo SAVOX SV-1254 MG HiVolt Low Profile
2 x Profile ABS Square 1 x 1000 mm
1 x Servo SAVOX SA-1256 TG
2 x Servo SAVOX SW-1250 MG digi
1 x ABS Strip 1.5x3.0x1000 mm
1 x ABS Strip 1.5x6.0x1000 mm
1 x Aluminun wheel collar 3.5 mm Ø (4 uds)
1 x FOAM - CURE™ (24g)
1 x T-Connector 4.0 mm x 1000 mm
1 x Propeller RABOESCH M4 40 mm (3 Blades) (Left hydropropeller)
1 x Propeller RABOESCH M4 30 mm (3 Blades) (Left hydropropeller)
1 x L-Connector 1.0 mm x 1000 mm
1 x Propeller RABOESCH M4 40 mm (3 Blades) (Right hydropropeller)
1 x Rigid coupling brass Ø 5.0 / 4.0 mm L: 25 mm
1 x Rigid coupling brass Ø 3.0 / 2.3 mm L: 20 mm
1 x Propeller RABOESCH M4 45 mm (3 Blades pr) (Right hydropropeller)
1 x Servo BLUE Bird BLS-H71B v2
2 x ABS "T" angle 10.0x10.0x1000 mm
1 x Flat Connector 4.0 mm x 1000 mm
1 x Servo SAVOX SV-0236 MG HV
1 x Profile ABS Square 2 x 1000 mm
2 x ABS angle 3,0x3,0x1000 mm
1 x SAVOX SH 0254 servo
1 x Savox Brushless Servo SC-1251 MG
1 x U Profile ABS 8,0x4,0x1000 mm
1 x Savox Brushless Servo SB-2271SG
1 x Servo SAVOX SA-128S SG
1 x Combo RAY C3542-1000 + ESC 60A
2 x PowerBox Smokepump JETs 2x outside
3 x Extension for LC-Display 50cm
1 x AXI 2217/16 V2
1 x AXI 2217/16 V2 Long
1 x Extension MPX-MPX 20 cm
1 x AXI 2808/20 V2
1 x 50m servo "Premium" wire (white/red/blue)
1 x AXI 2212/20 V2
1 x Conector JR Servo male (10 pcs)
1 x AXI 2820/12 V2 Long
1 x Fibreglass-Spinner BS ∅155 x 200 mm
1 x AXI 2814/20 V2 Long
1 x Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC
1 x AXI 2808/20 V2 Long
1 x AXI 2217/20 V2
1 x AXI 2808/16 V2 Long
1 x AXI 2808/24 V2 Long
1 x BlueCom™ Adapter (iOS)
1 x AXI 2820/14 V2
2 x Cable set PREMIUM Maxi, SUB-Done 4three fuselage/wing 200 cm
2 x Conector JR Servo male (50 pcs)
2 x Batetia LiFe 3200 mAh 6.6v MPX PowerBox
1 x Cable set Premium™ MAXI "one4two"
1 x AXI 2820/12 V2
2 x 100m servo "Premium" wire (white/red/blue)
2 x Charging Extension 50cm for 2 Battery
1 x Smoke Oil Blue 5 l
2 x 12V Car Adapter
1 x Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
2 x BlueCom™ Adapter (Android / WP)
1 x Adapter lead MPX/XT60
1 x Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC
1 x Charger 220/110v
1 x AXI 2814/16 V2
3 x Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC
1 x AXI 2826/12 V2
1 x PowerBox Smokepump
1 x AXI 2808/16 V2
1 x AXI 2212/26 V2
1 x 30 cm DEANS female connector
1 x AXI 2820/8 V2
2 x Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC
1 x AXI 2814/20 V2
1 x AXI 2826/8 V2
1 x Motor 2212 (1000KV) Quadcopter F450
1 x Suncover 100cc Red
1 x Head runner
1 x Rotorshape Elevator
1 x Head spacer
1 x Cierva C30 simulated motor
1 x Head core
1 x Pilot LA 500
1 x Head lower part
1 x Blades 330mm
1 x Servo KST X08 Plus 9g HV servo
1 x U Profile ABS 3,0x6,0x1000 mm
1 x 270 mm 3/3 mm shaft ship
1 x Profile ABS half cane 4x1000 mm
1 x Profile ABS half cane 5.0x1000 mm
1 x Rigid coupling brass Ø 5 mm L: 25 mm
1 x Reed valve for DA 50-R
1 x Piston ring for ZG 26SC/EI, ZG 26SCM ZG 26SLH and Zenoah G260RC/
1 x Rudder 107-06
1 x Savox Brushless Servo SC-1267 SG
1 x PITTS CHALLENGER 87″ 2.20m (120cc) 02 ARF
1 x Servo arms set HS-60/81/85/5082MG/5085mg
2 x EXTRA NG 74" yello/blue/red (Skywing RC)
1 x EXTRA NG 74" white/red/blue (Skywing RC)
1 x EXTRA 330L 35% hardware pack (Precision Aerobatics)
1 x Servo KST HS08A Wing Servo - 5.2Kg.cm 0.11s 11.0g 8mm
1 x EDGE 540-A 105" (2660 mm)
1 x SyRen 10A 6V-24V Regenerative Motor Driver
1 x Brazo servo aluminio KST 25T-5V2,3515,325,125,135,145X10,X12,A13
1 x Profile ABS half cane 2.0x1000 mm
1 x Spring clamp for tube Ø50 mm
1 x Crimping sleeves for cable 1.3 mm (10 pcs)
1 x 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Stainless steel cable Ø 0.62 mm (10 m)
1 x Profile ABS half cane 7.0x1000 mm
1 x UHU hart 35 g
1 x UHU Por 50ml/40g
1 x Servo DL3017 Digi 17Kg-0.15s/60º
1 x U Profile ABS 1,0x2,0x1000 mm
1 x Streamline Stainless Steel Tubing 7.5x4.5x1000 mm
1 x Streamline Stainless Steel Tubing 9.0x5.0x1000 mm
1 x Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor)
1 x AXI 5320/34 V2
1 x AXI 4120/18 V2
1 x External LED's (2 pcs)
1 x Dean "T" - Futaba Adapter
1 x Carbon fiber rod 5.0 mmx1000 mm
1 x AXI 5345/18 HD V2 SAILPLANE
1 x AXI 5325/34 V2
1 x AXI 5330/F3A V2
1 x AXI 4130/16 V2
1 x USB Interface Adapter
1 x Premium servo extension 100cm
1 x Adapter lead MPX/EC3
1 x 2 piece mounting frame
1 x MPX-Dean "T" Adapter
1 x MicroMatch PowerBox
1 x LightBox SR
1 x 5 line servos wire black (1 m)
1 x Conector JR Servo female (50 pcs)
1 x AXI2203/40 VPP
16,250.51EUR
Manufacturers
Languages
Español English
Currencies