Top » Catalog » Motors & Turbines » Explosion » Gasoline » SAITO » AE710099

1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
    Oils/Smoke Liquids
    Gasoline->
      DA
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NGH motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      Spare DA
      Spare parts DLE
      Spare parts MVVS
      Spares Zenoah/ZG
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesories/Muflers
    Glow->
  Turbines->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

21x14 BIELA propeller (3-blades) Pusher
89.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Straightened rod Ø 5.5 mm x 1000 mm
3 x	Straightened threaded rod M2-1m
1 x	Straightened rod Ø 8.0 mm x 1000 mm
1 x	Straightened rod Ø 1.5 mm x 1000 mm
2 x	Straightened rod Ø 2.5 mm x 1000 mm
2 x	Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x	Straightened rod Ø 6.0 mm x 1000 mm
1 x	Straightened rod Ø 0.5 mm x 1000 mm
3 x	Straightened rod Ø 1.2 mm x 1500 mm
1 x	Straightened rod Ø 1.0 mm x 1000 mm
2 x	Straightened rod Ø 4.0 mm x 1000 mm
1 x	Brass hexagonal rod Ø 4 mm x 1000 mm
2 x	Straightened rod Ø 3.0 mm x 1000 mm
2 x	Straightened rod Ø 4.5 mm x 1000 mm
2 x	Brass hexagonal rod Ø 3 mm x 1000 mm
1 x	Aluminium rod Ø 4.0 mm x 3000 mm
1 x	SIMtransmitter 6 Mode 2
1 x	Interface Realflight Simulator
2 x	EasyFLY Addon
2 x	Interface Jack Adapter IKARUS
1 x	Glases Nimbus "Black"
1 x	Zurich Sport Sunglasse Dark Sensity BROWN Glasses
2 x	Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses
1 x	Glases Stratus
1 x	BALSA trip 3.0x5.0x1000 mm
2 x	Extractor piñones 2.3/3.2 mm
1 x	BALSA trip 6.0x6.0x1000 mm
1 x	Pine wood slat 3.0x10.0x1000 mm
1 x	Mahogany wood slat 3.0x3.0x1000 mm
1 x	BALSA trip 2.0x10.0x1000 mm
1 x	Beech dowels 10 mm x 1000 mm
1 x	Linden wood slat 3.0x3.0x1000 mm
1 x	Pine wood slat 5.0x5.0x1000 mm
1 x	BALSA trip 2.0x2.0x1000 mm
1 x	BALSA trip 5.0x5.0x1000 mm
1 x	Walnut wood slat 3.0x3.0x1000 mm
2 x	Pine wood slat 1.5x3.0x1000 mm
1 x	Pine wood slat 2.0x10.0x1000 mm
1 x	Liston HAYA 8 x 8 x 1000 mm
1 x	BALSA triangular 6x6x1000 mm
1 x	BALSA triangular 15x15x1000 mm
1 x	Walnut wood slat 1.5x1.5x1000 mm
1 x	BALSA trip 10x10x1000 mm
1 x	Trailing edge BALSA 35x8x1000 mm
1 x	Mahogany wood slat 1.5x1.5x1000 mm
1 x	BALSA triangular 10x10x1000 mm
1 x	Linden wood slat 2.0x2.0x1000 mm
1 x	Pine wood slat 3.0x5.0x1000 mm
2 x	Beech dowels 2.0 x 1000 mm
1 x	BALSA leading edge 8x10x1000 mm
1 x	Adapter lead MPX/XT60
1 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x	Dean "T" - Futaba Adapter
1 x	USB HLS prog. interface
1 x	APM2.6 Power module with 5.3V DC BEC
1 x	TP/TopFuel - XH 2/3S Adapter
1 x	CM-3
1 x	CC 02
1 x	Cabel charger transmitter GRAUPNER
1 x	CC 05
1 x	2 LiPo XH>EH adapter
1 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x	3 LiPo XH>EH adapter
1 x	Bec MR UBEC 5A (5v/6v/7v)
1 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x	30 cm BEC cable (female)
1 x	CC 01
1 x	CellPRO 4S Adaptader (GP/KO up to 4S)
1 x	JETImodel SINGLE BEC
1 x	Red copper lacquer wire Ø0,2 mm (5 m)
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	30 cm BEC cable (male)
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	4 LiPo XH>EH adapter
1 x	BEC 3A FOXY
1 x	Black copper lacquer wire Ø0,2 mm (5 m)
1 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x	Carbon fiber rod 20 mmx1000 mm
1 x	Squared carbon wing joinner 5x5x220 mm
1 x	SE Ring 300 mm (2 pcs)
1 x	Cinta Goldfix 1m
1 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x	Locking cable tie 4.6x203 (uds)
1 x	Motor DLE 200cc Premium Muffler
1 x	1/10 Pilot "Jack"
1 x	Monokote PLATINO metalizado (1.8x0.65m)
2 x	4,8x1000 mm 2:1 black termoretract tube
1 x	Profile ABS Square 2 x 1000 mm
1 x	37 mm PVC transparent battery termo-retract (1 m)
1 x	Brass control horn M4 short for wire (4 pcs)
2 x	Brass rod Ø 0.5 mm x 1000 mm
1 x	Straightened rod Ø 7.0 mm x 1000 mm
2 x	Straightened rod Ø 0.8 mm x 1000 mm
2 x	Tapa estado carga XT-60 (6 pcs)
2 x	Straightened threaded rod M3 - 1m
1 x	Ventus 1:4 set of instruments
1 x	Brass hexagonal rod Ø 5 mm x 1000 mm
1 x	Pine wood slat 6.0x6.0x1000 mm
1 x	Pine wood slat 3.0x7.0x1000 mm
1 x	127x43 Ø6.0 mm aluminium core wheel
1 x	Wheel FEMA 70 mm / 5 mm
1 x	Super Light Wheels(Sponge Tyre) Ø 50mm x 19mm (2pcs) axis Ø 3.5m
1 x	Wheel 38 mm V2
1 x	Aluminun wheel collar 2.5 mm Ø (4 uds)
1 x	Aluminun wheel collar 3.5 mm Ø (4 uds)
1 x	Katana Mini carbon wheel pants (2 pcs)
1 x	Aluminun wheel collar 4 mm Ø (4 uds)
2 x	Nose wheel 62 mm
1 x	89x32 mm (3.5") axle Ø5 mm aluminium core wheel
1 x	60x25 mm tail wheel "type F3A"
1 x	69x25 mm (2.75") axle Ø4 mm aluminium core wheel
1 x	Wheel 75 mm with electromagnet and brake disk (2 uds)
1 x	Glases Moritz
2 x	GameCommander USB Universal
2 x	Glases Innovation Plus
2 x	Release wax 250ml
2 x	Universal Colour Paste deep black 250 g
1 x	PARTALL® Hi-Temp Wax, 340 g
1 x	6,4x1000 mm 2:1 green termoretract tube
1 x	PVC red battery termo-retract 68 mm (10 m)
1 x	1,2x1000 mm 2:1 black termoretract tube
1 x	PVC termo-retract battery 45 mm transparent orange (1 m)
1 x	PVC transparent battery termo-retract 85 mm (1 m)
1 x	Glases Nimbus
1 x	Female connector for 6 pines AWG
1 x	Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x	wing/fuselage connector for 12 pines AWG 20-24
1 x	Female connector for 10 pines AWG
1 x	Support conector MPX (6 pcs)
1 x	Support pump Xicoy X45
1 x	Recessed MPX connector support (6 pcs)
1 x	500 ml sealer (DOPE)
1 x	Spray adhesive AEROFIX 2
1 x	Cap Hispano Aviación
1 x	Softshell Hispano Aviación
1 x	Shirt Hispano Aviación
1 x	Support ECU Xicoy X-45
1 x	Soporte filtro FESTO (4 pcs)
1 x	Support pumb/filter Xicoy X45
2 x	Support Flush MPX Conector (6 pcs)
1 x	Angle support XT60 conector
1 x	Support Pitot JETI
1 x	Aro pasacable Ø20 mm (4 pcs)
1 x	Support Filtro FESTO
1 x	Soporte grifo FESTO (2 pcs)
1 x	Brass rod Ø 0.8 mm x 1000 mm
1 x	Straightened rod Ø 5.0 mm x 1000 mm
1 x	20 mm tail wheel for 0,5-1 Kg models
1 x	Propeller APC 10x5.5 MR Electric multirrotor PUSHER
1 x	Propeller APC 12x10 Electric
1 x	Universal Colour Paste signal white (RAL 9003) 1 Kg
1 x	20 g tin paste
1 x	2.5 inch aluminium core wheel (1 pcs)
1 x	Wheel FEMA 82 mm / 5 mm
1 x	Wheel 22 mm
1 x	Propeller APC 10x3,8 SF
1 x	Tape GFK 50 mm
1 x	Spray YELLOW Inca Lexan 150ml
1 x	Spray adhesive INFUTAC (Clear) 500 ml
1 x	Paint gun for sprays
1 x	Solvent Plasti Dip 1000 ml
1 x	Plasti Dip Liquid Tape 429 ml black
1 x	Presto SF Light Filler styrene-free (420 g)
1 x
1 x	Nitroverdu 500 ml
1 x	1000 ml sealer (DOPE)
1 x	20x15 Falcon electric V2
1 x	Simulador RealFlight RF-9.5 S (sin emisora)
1 x	Mahogany wood slat 2.0x2.0x1000 mm
1 x	BALSA trip 3.0x3.0x1000 mm
1 x	3-blades 28x12 carbon prop Super Silence
1 x	24x10 prop Super Silence
1 x	3-blades 20x12 carbon prop Super Silence
1 x	3-blades 27x12 carbon prop Super Silence
1 x	22x10 prop Super Silence
1 x
1 x	3-blades 21x12carbon prop Super Silence
1 x	3-blades 30x12 carbon prop Super Silence
1 x	24x14 prop Super Silence
1 x	3-blades 24x12 carbon prop Super Silence

6,477.48EUR