1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x Para-RC Mix
2 x Set cintas unión paracaídas 145 cm
3 x LUCAS pilot ARTF
1 x Paramotor BackPack XXS 2
3 x Paramotor Kit Camo H1.5/ Ben Red
1 x Para-RC Trike "RC-Bullix"
2 x Parachute P4
2 x Wing OXY 0,5 pulgadas2
2 x Paramotor Trike XL
4 x Trike XL motor set (motor+esc+prop)
1 x Short ball link M1.6 (6 uds)
1 x M2,5 5Diam metal ball link V3 (2 pcs)
1 x Short ball link M3 (6 uds)
1 x 6 mm hexagonal ball link M3 (10 pcs)
1 x M2,5 5Diam short black ball link V2 (2 pcs)
1 x M2,5 Diam metal ball link V3 (2 pcs)
1 x Extractor piñones 2.3/3.2 mm
1 x M2/M1/6 3Diam long black ball link V1 (2 pcs)
1 x M2/M1/6 3Diam long black ball link V1 (6 pcs)
1 x Socket head long ball link M3 (6 uds)
1 x M2 5Diam short black ball link V2 (2 pcs)
1 x Short ball link M2 (6 uds)
1 x Ball link M3 (10 pcs)
1 x Ball link M3 RPA's-UAV's
1 x 6 mm ball link M3 (10 pcs)
1 x Socket head long ball link M3 (2 uds)
1 x M3 INDUSTRIAL ball link (2 uds)
1 x Joint with bearing M2 22x5,5
1 x Pin type hinge Al 4,5x70 mm to wire (2 pcs)
1 x Pin type hinge Al 4,5x70 mm demount (2 pcs)
1 x Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x Nylon hinge for flaps/gates 27x10,5 (2 pcs)
3 x Gates hinge black 30x16 mm (2 pcs)
1 x 15 mm reinforced hinge
1 x 67 mm cylidric hinge Ø 5 mm (4 pcs)
3 x Long pinned hinge (6 uds)
1 x Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
3 x Gates hinge aluminium (1 pcs)
1 x Nylon hinge 20x15x0,3 (10 pcs)
1 x Flap hinge 33x9 mm (6 pcs)
2 x 67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x Pin type hinge Al 3,0x50 mm (2 pcs)
1 x Gates hinge 30x16 mm (2 pcs)
1 x Horn with ball 40x30
1 x Streamline Stainless Steel Tubing 7.5x4.5x1000 mm
1 x Fiberglass heat shield Ø 8 mm 1000 mm
3 x Rescue 1,8m2 / BackPack
2 x Para-RC "RC-Evo-Cross" Rescue
2 x Windsock Ozone L - 700 mm
3 x Ballast 700gr OPALE
1 x Actuador lineal HLS12-100210-7.4v
2 x Nylon hinge 20x20x0,3 (10 pcs)
2 x Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x Fast'n EZ-CA-Hinge, lite (12 uds)
1 x Support FUEL DOT V3
1 x 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x Support Antena 2.4 Ghz (2 pcs)
1 x Fast'n EZ-CA-Hinge (12 uds)
1 x Pin hinge 39x20 mm (10 uds)
1 x 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x Pin hinge 26x11 mm (10 uds)
1 x Round Rod 1,5x1000 mm
1 x ABS Strip 1.0x3.0x1000 mm
1 x ABS Strip 1.5x3.0x1000 mm
1 x Round Rod 1,0x1000 mm
1 x Long pinned hinge (12 uds)
1 x Large flex hinge (12 uds)
1 x Gates hinge
1 x 3-blades 16x10 carbon prop Super Silence
1 x 100g Flux Paste for Silver Solder
1 x 10cm Flexible Stainless Steel Exhaust Tubing D=25mm
1 x Wing OXY 5,0 m2
1 x Tube Pitot to PIXHAWK
2 x Aramid 50 daN 50 m
3 x Opale Rucksack
1 x Digital Air Speed Sensor And Pitot Tube Set
1 x MAX pilot ARTF
1 x PIX Hawk with accesories
1 x Electric Landing Gear "Black Edition" ULTIMATUM 3.0 (Elektron Re
1 x L-39 Albatros 1:4.75, Electric retract landing gear
1 x ASPIRE Red ARF 2.000 mm
1 x ASPIRE Red ARF 2.000 mm, Front Fuselage
1 x F-16 Scale 1:6 Camuflaje Grey (1.630mm)
1 x BOEING 727, Retract set for Boeing 727
1 x HAWKER HUNTER 1:5,8 Desert (1.770mm)
1 x ASPIRE Red ARF 2.000 mm, Set Elevators
1 x Tire ODYSSEY Ø 89mm
1 x Stainless Steel Mini Pipe for Titan ZG 20 and ZG 23
1 x Stainless Steel Bend D 15x0,4mm
1 x DA-50 Carburator
1 x 18 mm reinforced hinge
1 x 
1 x Aluminium carb bend for ZG 45SL
1 x Plug cap with spring for ZG 38/S/SC
1 x PYRO 900-52L
1 x Servo TOPMODEL S7520 MG
1 x Motor Mega AC 16/20/02
1 x Motor Mega AC 16/35/01
1 x PPM Encoder Module
1 x Motor Mega AC 16/15/07
1 x Motor Mega AC 16/25/02
1 x Silencer with rear exhaust DA-120
1 x PCI-HV ignition conversion set with Zenoah rubber plug cap for Z
1 x Insulator block ZG 38/S/SC
1 x Reed valves with doubler, set for DA 85/100/120
1 x Piston for ZG 20
1 x Carburettor and crankcase nipple for ZG45SL, ZG62/S/SL and ZG74B
1 x 1000 ccm gasoline fuel tank
1 x L ELBOW DA-120 normal(2 pcs)
1 x KIRA 600-38 6,7:1
1 x PYRO 700-56L
1 x PHASOR RACE 2035/4100 1D
1 x KIRA 480-38
1 x KIRA 480-43
2 x Cierre cabina aluminio Ø4, I=10 mm
1 x 58 mm micro servo cover
1 x 18 mm wing servo holder
1 x 50x45 mm micro-mini servo cover
1 x Starter EM Gear Power 80
1 x Motor Mega AC 16/15/04
1 x Motor Mega AC 16/15/08
1 x QUANTUM II 55 Brushless Motor
1 x PYRO 700-45
21,830.04EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies