3 x | Round Rod 1,25x1000 mm |
2 x | Futaba Female 40 cm extension |
4 x | ABS "T" angle 4.0x4.0x1000 mm |
3 x | Brass control horn M4 short for wire (10pcs) |
2 x | Horn for flap control (1 pcs) |
4 x | ABS angle 3,0x3,0x1000 mm |
2 x | 5 mm M2 variable inclined horn |
2 x | Adjustable brass horn threaded M3 |
4 x | Profile ABS Square 1 x 1000 mm |
4 x | ABS rectangular profile 10x5.0x1000 mm |
5 x | Profile ABS half cane 2.5x1000 mm |
3 x | Brass control horn M2 long for wire (10pcs) |
6 x | ABS angle 1.5x1.5x1000 mm |
5 x | Horn mando small (2 pcs) |
3 x | 5 mm M2 variable horn |
2 x | Duralumium F3A horn 30x10x23,5 mm (2 pcs) |
2 x | 6 mm aluminium horn with patella |
3 x | Cable with accesories |
3 x | Control horn long w/ball |
3 x | Brass control horn M2 large for wire (2pcs) |
4 x | Horn 13,5x16 mm (2 pcs) |
3 x | Horn DUBRO 1/2A |
4 x | 20 mm carbon horn |
4 x | Horn micro type4 Ø 0,5 (2 pcs) |
3 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
4 x | ABS angle 4,0x4,0x1000 mm |
2 x | Cross Connector 4.0 mm x 1000 mm |
5 x | Profile ABS half cane 3x1000 mm |
4 x | ABS "T" angle 6.0x6.0x1000 mm |
4 x | Brass control horn M4 long for wire (4 pcs) |
3 x | Horn 6/20 with M3 Bearing |
5 x | ABS "T" angle 2.0x2.0x1000 mm |
3 x | L-Connector 1.5 mm x 1000 mm |
5 x | Profile ABS half cane 8.0x1000 mm |
1 x | Straightened rod Ø 2.0 mm x 1000 mm |
2 x | Cable silicona macho batt. receptor 30 cm (Graupner) |
1 x | 105 mm PVC transparent battery termo-retract 68 mm (1 m) |
2 x | Fresa corte diamante Ø 2.35mm (lentil) |
3 x | Fully Threaded Steel Rod M2,5 (2 uds) |
1 x | Black spiral protective cover for wires Ø 0,5/50 mm - 25 m |
1 x | Carbon fiber rod 6.0 mmx1000 mm |
2 x | 1/6 Pilot "Cindy" |
2 x | ABS tube 9.0x7.0x1000 mm |
1 x | Balsa panel 5.0x100x1000 mm |
2 x | Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 blue pcs) |
1 x | Carbon fibre sleeve 12k 170 mm x 5m |
3 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
2 x | Horn 6/35 with M3 Bearing |
2 x | BALSA trip 3.0x3.0x1000 mm |
3 x | ABS tube 14.0x10.0x1000 mm |
1 x | 6 mm Quick clamp_S (10 pcs) |
2 x | Kwik link aluminio IZD. M3 L: 30mm (2 uds) pin Ø 2 mm |
2 x | Propeller APC 16x10 Glow/Gas |
1 x | Carbon fiber rod 10 mm x 1000 mm |
1 x | Gates hinge aluminium (1 pcs) |
1 x | Futaba 20 mm servo arm |
2 x | Solvent Plasti Dip 1000 ml |
1 x | FunCup XL RR |
1 x | Round Rod 1,5x1000 mm |
1 x | Buy Perforated film 100 cm / 10 m |
1 x | Servo SAVOX SV-1273 TG |
1 x | 90x60 mm standart servo cover |
1 x | Brass rod Ø 1.0 mm x 1000 mm |
1 x | EC5-Set female, simple quality, 2 x female pin, 1 x blue housing |
1 x | EC-Cutter |
3 x | ABS angle 5,0x5,0x1000 mm |
1 x | Buy Perforated film 145 cm / 50 m |
3 x | Flat Connector 4.0 mm x 1000 mm |
1 x | ABS Strip 1.0x2.0x1000 mm |
1 x | Civilian pilot "G-Man" size 9cm (Slimline) |
4 x | Profile ABS half cane 7.0x1000 mm |
2 x | Gold antispark 5,5 mm plug |
2 x | Servo FUTABA BLS175 SV |
1 x | 3,0x60 mm allen screwdriver |
3 x | Stickers-digit for marking |
1 x | Propeller APC 10x5.5 MR Electric multirrotor PUSHER |
1 x | Aluminium cap bolt washer M4 blue (8 pcs) |
1 x | Servo inverter |
1 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
1 x | Allen wheel collar M3x5 |
1 x | Cable coupler M3 (10 uds) |
2 x | Flap hinge 33x9 mm (6 pcs) |
1 x | 50x45 mm micro-mini servo cover |
3 x | Red smoke canister 65 g |
3 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 5 mm |
1 x | Aluminum Bayonet / strongal D25 mm / 1 m |
1 x | L-shaped servo mount |
1 x | Connector Sub-D 2+5 Male |
2 x | 25 mm carbon servo arm |
1 x | Futaba 14/20 mm servo pull-pull double arm with ball link |
5 x | Profile ABS half cane 4x1000 mm |
2 x | Servo RHINO pro SHV digi 4 |
1 x | Servo TOPMODEL DS1413 T |
3 x | Futaba BLS152 - Upper Case |
1 x | Nylon hinge for flaps 33x9 (2 pcs) |
2 x | Ferrita con funda |
2 x | Servos security connector (2 pcs) |
1 x | Universal Colour Paste signal white (RAL 9003) 1 Kg |
1 x | Flat washer 4.3 mm (20 pcs) |
1 x | Medidor ángulos y/o incidencias |
3 x | Spring lock washer 3.1 mm (20 pcs) |
2 x | Futaba S3010 Servo - Standard BB 0.16s/6.5kg |
1 x | Brass ball links BS M3 V1 (10 pcs) |
1 x | M2,5 / 5Diam metal short ball link V3 (2 pcs) |
1 x | Cabel "Y" 30 cm (Futaba) |
1 x | Tube Pitot to PIXHAWK |
1 x | ORACOVER Ferrari red (2 m) |
1 x | Fresa corte diamante Ø 2.7mm (bola) |
1 x | 3,2x1000 mm 2:1 red termoretract tube |
3 x | Vest clothes Hispano Aviación |
1 x | White smoke bombs AX-3 (10 pcs) |
1 x | Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
2 x | XT-60 connector (female) |
1 x | ABS tube 3.0x1.0x1000 mm |
1 x | Cable coupler M2 (10 uds) |
1 x | ABS tube 7.0x6.0x1000 mm |
2 x | Straightened threaded rod M2-1m |
1 x | 6,4x1000 mm 2:1 blue termoretract tube |
2 x | Horn mando long (2 pcs) |
1 x | Cable silicona macho batt. receptor 30 cm (Futaba) |
4 x | AX-60 starters (5 pcs) |
4 x | Spinner INO 89 mm Chrome (Imitacion metal) |
3 x | RH long aluminium horn (2pcs) |
2 x | SAVOX SH 0255 MG servo |
3 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
3 x | Interface Jack Adapter IKARUS |
2 x | Plasti Dip Liquid Tape 429 ml orange |
2 x | Anodized aluminium servo M3x16 screw (4 red pcs) |
3 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
3 x | Birch plywood plate 600x300x2.0 mm |
2 x | Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
2 x | JETImodel SINGLE BEC |
2 x | Aluminium cap bolt washer M4 red (8 pcs) |
2 x | Connectors banna oro 8,0 mm 5 pcs(Female) |
1 x | Anodized alum. M4x0,7x20 mm Flat Head screw (4 blue pcs) |
1 x | Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm) |
1 x | 1/12 Pilot "Langley" |
1 x | Truck-trailer for gliders 720 x 285 mm |
3 x | Rubber profile 10-2 mm 2M |
1 x | XH female balance (3S) connector (2 pcs) |
2 x | UBEC 6A KAVAN |
2 x | Strip ABS 2.0x5.0x1000 mm |
1 x | Anodized aluminium servo M4x5/8 screw (4 blue pcs) |
1 x | Ball link M3 (10 pcs, flat ball) |
1 x | Threaded coupler M2,5 Ø 2 mm (10 pcs) |
2 x | Servo FUTABA BLS172 SV |
2 x | CAM-Carbon Light Prop 10x4.5" (Prop right) |
2 x | 140 mm rods set for direction control |
1 x | ABS tube 4.0x2.0x1000 mm |
2 x | Indoor hinge with servo arm integraded |
2 x | Threaded coupler M3 (10 uds) |
1 x | Big-Malibu XL Roof box with surfboard rack GREY |
2 x | PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m) |
2 x | Anodized alum. M4x0,7x20 mm Flat Head screw (4 lilac pcs) |
1 x | Hitec 38 mm servo arm with ball link |
4 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) |
2 x | Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses |
2 x | Brass control horn M4 short for wire (4 pcs) |
2 x | Conector Servo female 4 pines |
2 x | U Profile ABS 2,0x4,0x1000 mm |
2 x | Profile ABS half cane 2.0x1000 mm |
3 x | White smoke canister 100 g |
1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
1 x | Ferrita 27x14x7 mm |
2 x | Servo NARO Max Std |
1 x | Para-RC Trike "RC-Bullix" |
3 x | Flat washer 3.2 mm (20 pcs) |
1 x | Carbon tube (L 1000 mm, Ø22 mm, Ø21 mm) |
2 x | Connectors DEANS (T) micro |
3 x | Cable control set |
1 x | XH male balance (2S) connector (2 pcs) |
1 x | 30 cm MULTIPLEX female connector |
1 x | Cabel "Y" 30 cm (graupner) |
1 x | Servo SAVOX SV-1260 MG |
1 x | Fresa corte diamante Ø 2.35mm (flame) |
2 x | Cable grommet Ø 3.2 mm (4 uds) |
2 x | Optotronix Aurora Plug |
1 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
5 x | Futaba BLS255/272/471SV - Gear Set |
1 x | DPS Switch JR/JR |
1 x | Socket head ball link M3 (2 uds) |
2 x | Lock washer 2.7 mm (20 pcs) |
1 x | ABS tube 4.0x3.0x1000 mm |
1 x | Windsock Ozone L -1200 mm |
1 x | Cable grommet 9.5 mm (4 uds) |
2 x | Conector JR Servo male (10 pcs) |
2 x | Savox Brushless Servo SB-2271SG |
1 x | Cabel charger transmitter GRAUPNER |
1 x | Ball Link Plier |
1 x | Balsa panel 3.0x100x1000 mm |
3 x | Servo FUTABA BLS 272SV |
4 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
1 x | Extension silicon 50 cm (Futaba) |
1 x | ABS tube 6.0x5.0x1000 mm |
1 x | Kwik link with arm M5xM2,5xL30 |
3 x | Rudder forward 90x28 "type Kato" |
3 x | SlowFlyer control horn (3 pcs) |
1 x | Futaba 25 mm servo arm with ball link |
1 x | Anodized aluminium M4x0,7x20 mm screw (4 blue pcs) |
1 x | Wing connector 8pin with pin strip, plug & socket |
1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
1 x | Metal gear set for HS85MG/5085MG |
1 x | Blue metalic ball link M3/3 azul (2 pcs) |
3 x | ABS "T" angle 8.0x8.0x1000 mm |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 m |
1 x | Propeller APC 10x5.5 MR Electric multirrotor |
1 x | 58 mm PVC transparent battery termo-retract 68 mm (1 m) |
2 x | ABS Strip 1.0x5.0x1000 mm |
1 x | 18 mm reinforced hinge |
1 x | Allen wheel collar M3x3 |
1 x | Streamline Stainless Steel Tubing 6.3x3.5x1000 mm |
1 x | White smoke bombs AX-60 (5 pcs) |
1 x | Servo arm with 6 mm hole to FEMA 9800A |
4 x | L-Connector 1.0 mm x 1000 mm |
1 x | Extension silicon 75 cm (Futaba) |
1 x | Strip ABS 2.0x8.0x1000 mm |
2 x | Horn 5/20 with M2 Bearing |
2 x | Brass control horn M2 short for wire (2 pcs) |
1 x | BALSA trip 4.0x4.0x1000 mm |
4 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
1 x | Smoke set "Glider" |
1 x | ORACOVER Fluor red (2 m) |
3 x | Glases Nimbus "Black" |
3 x | Green smoke canister 100 g |
2 x | 20x200 mm battery rings |
3 x | Small aluminium horn red (2pcs) |
1 x | Anodized aluminium servo M4x5/8 screw (4 lilac pcs) |
1 x | M3/5Diam metal ball link V3 (2 pcs) |
1 x | M2,5 5Diam black ball link V2 (2 pcs) |
1 x | Ball link V1 Ø7 M4/3 (6 uds) |
1 x | Micro flex hinge (12 uds) |
1 x | 6 mm ball link M3 (10 pcs) |
1 x | PVC 0,14 qmm servos wire Hitec/Mpx (5 m) |
1 x | Canopy Lock V1 M3 Red (2 pcs) |
1 x | Pendulun 27g to tank |
3 x | Initior Receiver FRX2 Wireless |
1 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
3 x | Plastic caps for AIR BURTS (30 pcs) |
1 x | Piloto Jet "Green" 1/6 Scale |
1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
1 x | Servo TOPMODEL S7520 MG |
1 x | Handle for PERMAGRIT lime |
2 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
2 x | Horn DU-BRO 1/2 (2 pcs) |
1 x | U Profile ABS 8,0x4,0x1000 mm |
1 x | 38x4,5 mm wires output (2 pcs) |
2 x | ABS I Strip 10x5x1000 mm |
2 x | Lock washer 4.3 mm (20 pcs) |
2 x | 7 Servo SET 9g DS MG + Full servo extension cable set for Avanti |
1 x | Brass rod Ø 0.5 mm x 1000 mm |
1 x | Tornillo cabeza boton M4x12 mm (5 pcs) |
1 x | PVC 0,08 qmm Futaba servos wire (5 m) |
2 x | Canopy Latch |
1 x | Ply-Span 450x600/13g Blue |
1 x | Kwik link AL M3 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
2 x | Electric rocket starters (6 pcs) |
2 x | Ferrita 17x10x6.5 mm |
1 x | Paramotor BackPack XXS 2 |
1 x | Cabin latch Fox MDM1 4m (pair) |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 50m |
4 x | ABS rectangular profile 12x6.0x1000 mm |
1 x | Short ball link M3 (6 uds) |
3 x | Spinner INO 82 mm Chrome (Imitacion metal) |
1 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | Servo safety connector (10 pcs) |
1 x | Aluminium wide washer M3 gold (4 pcs) |
1 x | FUTABA 20 mm servo arm with ball link |
2 x | Civilian pilot "Curt" size 9cm (Slimline) |
1 x | Servoholder Dymond DS 1800 MG Digital (2 pcs) |
3 x | ABS angle 6,0x6,0x1000 mm |
1 x | |
2 x | 54 mm Futaba servo arm tandem with ball link |
2 x | 4 LiPo XH>EH adapter |
1 x | Connectors banna oro 3,5 mm (M/F) |
2 x | Set cables carga (Mini-JST, JST, XT60, Dean, EC3, TRX, Micro-T, |
1 x | XT-60 connector (male) |
1 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
2 x | M2 5Diam short black ball link V2 (2 pcs) |
2 x | Blind nut M3 (4 pcs) |
1 x | CM-3 |
1 x | Medium pin type hinge (12 uds) |
1 x | Quicklock washer 4 mm (10 pcs) |
1 x | Small pinned hinge (12 uds) |
1 x | Rubber profile 8-2 mm 2M |
1 x | Para-RC Mix |
1 x | Stainless steel silencer for DA 85/170 |
1 x | Fast attachment for servos (25 pcs) |
1 x | Connectors banna oro 4 mm (M/F) (ultralight) |
1 x | 6 mm M3 variable inclined horn |
1 x | 68 mm PVC transparent battery termo-retract 68 mm (1 m) |
2 x | Extension silicon 35 cm (Futaba) |
1 x | Extension silicon 25 cm (Futaba) |
1 x | Carbon servo arms for HITEC HS 65 (4 pcs) |
1 x | 50 mm servo arm with bearing (2 pcs) |
1 x | Servo Dymond D 37 Eco |
2 x | Short adjustable control horn 3x24 |
1 x | Futaba 17 mm servo arm with ball link HITEC |
2 x | 5 line servos wire black (1 m) |
1 x | 1,2x1000 mm 2:1 black termoretract tube |
1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm |
3 x | Profile ABS Square 2 x 1000 mm |
1 x | Extension silicon 30 cm male (Graupner) |
1 x | Protective Cover for wires Ø 20 mm 1000 mm |
2 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Futaba 38 mm servo arm with ball link |
1 x | Oracover Orange 2 m |
3 x | Kwik link aluminio IZD. M3 L: 30mm (6 uds) pin Ø 2 mm |
1 x | Protective Cover for wires Ø 15 mm 1000 mm |
1 x | Aramid 50 daN 50 m |
1 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
2 x | Conector FUTABA Servo male BLUE silicon (10 pcs) |
3 x | Spikes Band (5 m) |
2 x | BALSA trip 5.0x5.0x1000 mm |
3 x | Silicone 0,25 qmm servos wire Graupner (100 m) |
1 x | Circlik for shaft 1.5 mm (10 pcs) |
1 x | 500 ml sealer (DOPE) |
4 x | ABS angle 10,0x10,0x1000 mm |
1 x | Oracover Brown 2 m |
1 x | Servo SAVOX SA-1256 TG |
1 x | M3 Maxi ball link (2 uds) |
1 x | 5 LiPo XH>EH adapter |
1 x | Silicon black 2,5 qmm cable ( 25 m) |
1 x | Glases Aspen |
7 x | Profile ABS half cane 6.0x1000 mm |
1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
3 x | Profile ABS triangular 4.0x1000 mm 60º |
1 x | Tape GFK 50 mm |
1 x | SE Ring 200 mm (2 pcs) |
1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
2 x | Extra-long adjustable aluminium control horn 2,8x34 |
1 x | Connectors banana oro 6,0 mm Ultralight (M/F) |
1 x | SIMtransmitter 6 Mode 2 |
1 x | Aluminium blue ball links M3 V1 (10 pcs) |
1 x | Hitec 20 mm servo arm |
3 x | Profile ABS triangular 4.0x1000 mm 90º |
1 x | Black silicone 0,25 mm² wire (25 m) |
1 x | Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE |
2 x | Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor) |
1 x | 11 mm wing servo holder |
2 x | Horn 5/15 with M2 Bearing |
2 x | Straightened rod Ø 1.0 mm x 1000 mm |
2 x | PCARD Wireless System |
1 x | Glases Stratus |
1 x | ABS tube 16.0x14.0x1000 mm |
2 x | Heat Seal Iron |
1 x | Extra Hard Titanium Herxagon Screwdrivers |
1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
1 x | M3 Maxi ball link (2 uds) |
1 x | M3 Maxi ball link (2 uds) |
2 x | M2,5 5Diam short black ball link V2 (2 pcs) |
1 x | 25 mm reinforced hinge |
1 x | Servo Tester |
1 x | TP/TopFuel - XH 2/3S Adapter |
1 x | JR silicone servo wire 0,35 qmm / 5m |
1 x | SAVOX SH 0254 servo |
1 x | A/C quality beech plywood 600x300x1.5 mm |
1 x | "L" servo arm 65x49 mm (2 pcs) |
2 x | BALSA triangular 10x10x1000 mm |
4 x | Profile ABS triangular 2.0x1000 mm 90º |
2 x | PVC 0,14 qmm servos wire Graupner (100 m) |
2 x | Parachute expulsion foam |
1 x | Metal gear set for HS81MG/5082MG |
1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
2 x | Flat washer 2.2 mm (20 pcs) |
1 x | M2,5 Diam metal short ball link V3 (2 pcs) |
2 x | Xplorer2 anemometro |
1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
1 x | 1/12 Pilot "Tom" |
1 x | Futaba 24/30 mm servo pull-pull double arm with ball link |
2 x | AX-60 starters (5 pcs) |
1 x | 28x5 mm wires output (2 pcs) |
2 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
2 x | Flat washer 2.7 mm (20 uds)pcs) |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 5 m |
2 x | Futaba 3010 - Gear Set |
2 x | ALU servo arm 90º 3 mm shaft |
3 x | Profile ABS Square 4 x 1000 mm |
1 x | Ball link M2,5 (10 pcs) |
1 x | Servo SAVOX SA-1258 TG |
1 x | Cable grommet Ø 5 mm (4 uds) |
1 x | Cable tie mounts 4.3 (4 uds) |
3 x | ABS "T" angle 10.0x10.0x1000 mm |
1 x | Central piece 42 mm 0º [12 mm] |
1 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
1 x | Large flex hinge (12 uds) |
1 x | 46 mm Futaba servo arm tandem with ball link |
1 x | 90x75 mm standart servo cover |
1 x | Protective Cover for wires Ø 6 mm 1000 mm |
1 x | M3/5 Diam metal short ball link V3 (2 pcs) |
2 x | Connectors DEANS 4 pins (1 pair) |
1 x | 22m Fitting barb |
1 x | ORACOVER transparent Yellow (10 m) |
1 x | Futaba 54 mm servo arm with ball link |
1 x | ABS tube 8.0x7.0x1000 mm |
1 x | DYNAMOMETER S-1580 |
3 x | Conector JAPAN G2 Set 5 pares |
1 x | Long ball link M2 (6 uds) |
1 x | White smoke bombs AX-18 (5 pcs) |
5 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 7 mm |
1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Cable coupler M2,5 (2 pcs) |
1 x | Cable silicona female batt. receptor 30 cm (Futaba) |
1 x | Civilian pilot "Gramps" size 9cm (Slimline) |
2 x | Horn 6/27 with M3 Bearing |
1 x | 165 mm PVC transparent battery termo-retract 165 mm (1 m) |
1 x | Tape GFK 38 mm |
1 x | Ventus 1:4 set of instruments |
1 x | Cable coupler M2 (10 uds) |
1 x | SE Ring 450 mm (2 pcs) |
1 x | Carbon fiber rod 7.0 mmx1000 mm |
1 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
3 x | Set Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Short ball link M2 (6 uds) |
2 x | L-Connector 4.0 mm x 1000 mm |
1 x | 2,4x1000 mm 2:1 black termoretract tube |
1 x | Balsa panel 8.0x100x1000 mm |
1 x | Beech dowels 2.0 x 1000 mm |
1 x | Strip 3,5x1,75x330 mm |
1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | Servos wing assembly set HS 80/81/82/85 |
2 x | SAVOX SH 0254 servo |
1 x | Connectors banna oro 4 mm (M/F) |
1 x | Long ball link M1.6 (6 uds) |
2 x | Anodized aluminium servo M4x5/8 screw (4 silver pcs) |
3 x | U Profile ABS 5,0x10,0x1000 mm |
1 x | 2 mm male connector (2 pcs) with safety connector |
3 x | Profile ABS half cane 4x2.5x1000 mm |
1 x | Oracover Red 2 m |
1 x | Ball link duraluminium M3 V1 (10 pcs) |
1 x | 6 mm hexagonal ball link M3 (10 pcs) |
1 x | M2,5 Diam metal ball link V3 (2 pcs) |
1 x | Towing hook <3m |
2 x | Round Rod 2,0x1000 mm |
2 x | Aluminium wide washer M3 blue (4 pcs) |
1 x | silicon 100 cm Futaba Extension Ø 0,35 mm |
1 x | PARTALL® Hi-Temp Wax, 340 g |
1 x | Opale Rucksack |
2 x | Strip 2,0x2,0x330 mm |
1 x | Futaba 76/92 mm servo pull-pull double arm with ball link HUB Al |
1 x | Oracover Black 2 m |
1 x | Cable grommet Ø 4 mm (4 uds) |
1 x | Aluminium wide washer M4 Red (4 pcs) |
1 x | Ball link M1.6 (6 uds) |
1 x | Small flex hinge (12 uds) |
1 x | Straightened rod Ø 2.5 mm x 1000 mm |
1 x | Threaded coupler Micro M2 Ø 0,8 mm (10 pcs) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
1 x | Extension silicon 30 cm female (Graupner) |
1 x | Futaba 2x20 mm servo double arm |
1 x | Ball link M3 RPA's-UAV's |
1 x | Hitec 25 mm servo arm with M3 ball link |
4 x | Horn with ball 55x40 |
1 x | Ball Link Plier |
1 x | Ball link M3 (10 pcs) |
1 x | Kwik link AL M3 con Clip (2 pcs) |
1 x | Cockpit aluminium closing |
2 x | Micro clevis 0.8 mm(10 uds) |
1 x | Extension S-Bus 1-2 silicon 30 cm FUTABA |
1 x | Prolongador S-Bus JR/JR 10cm |
1 x | Cabel PVC 2 x 0.25 mm2 (5 m) red-black |
1 x | CC 02 |
1 x | ABS 500 x 400 x 1 mm (white) |
1 x | ABS tube 10.0x8.0x1000 mm |
5 x | Horn 20x28,5 mm (2 pcs) |
2 x | Small Crow DLE-170M |
5 x | 6 mm blue aluminium threaded horn with patella |
1 x | Socket head ball link M3 (2 uds) |
3 x | Spring lock washer 2.1 mm (20 pcs) |
1 x | Extension silicon 35 cm male (Futaba) |
1 x | Profile ABS triangular 6.0x1000 mm 90º |
1 x | 2 LiPo XH>EH adapter |
1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
1 x | Aluminium cap bolt washer M3 red (8 pcs) |
2 x | 90 mm rods + T patellas set for direction control |
4 x | Servo FUTABA SBL 471 SV |
2 x | Civilian pilot "Joe" size 9cm (Slimline) |
1 x | M2/M1/6 3Diam long black ball link V1 (2 pcs) |
1 x | Cable set PREMIUM , fuselage/wing one4one |
1 x | XT-30 connector (pair) |
3 x | Initior Transmitter FTX2 Wireless |
2 x | Extension silicon 10 cm (Futaba) |
1 x | Protective Cover for wires Ø 10 mm 1000 mm |
2 x | MPX Sub-D Adaptor |
1 x | Ring 320 mm length (5 pcs) |
1 x | Futaba 25 mm servo arm with M3 ball link |
2 x | Aluminium wide washer M4 Gold (4 pcs) |
1 x | 2 mm female connector (2 pcs) with safety connector |
1 x | Horn F3A de Titanium 16 mm (2 units) |
1 x | Futaba 50/60 mm servo pull-pull double arm with ball link |
1 x | Hitec 25 mm servo arm with ball link |
1 x | |
1 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | Aluminium M2x12 mm screw (4 pcs) |
1 x | Carbon fiber rod 2.5 mmx1000 mm |
1 x | Circlik for shaft 1.9 mm (10 pcs) |
1 x | Double conector with JR adapter and 200 mm extension |
1 x | Conector FUTABA Servo female BLUE silicon (10 pcs) |
1 x | Futaba 46 mm servo arm with ball link |
1 x | Connectors banna oro 3 mm (M/F) |
1 x | Spring lock washer 4.1 mm (20 pcs) |
1 x | U Profile ABS 3,0x6,0x1000 mm |
1 x | Disposable Injector Bags (30x16cm) 100 pcs |
2 x | 45 mm rods + T patellas set for direction control |
2 x | Metal ball clevis M3 (10 uds) |
2 x | Oracover Yellow CUB 2 m |
1 x | Micro control horn (2 pcs) |
1 x | 2,4x1000 mm 2:1 green termoretract tube |
2 x | Connector Sub-D 2+5 Female |
1 x | Protective open Cover for wires Ø 13 mm 1000 mm |
3 x | Red smoke canister 140 g |
1 x | Carbon fiber rod 4.0 mmx1000 mm |
1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
2 x | Aluminium rod Ø 4.0 mm x 3000 mm |
1 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
2 x | Carbon fiber flat 1000x3.0x1.0 mm |
1 x | Extra long horn 60x30 |
1 x | Pilot JAN 1/4 Saiplanes |
1 x | Carbon fiber rod 8.0 mmx1000 mm |
2 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
1 x | Ply-Span 450x600/13g Orange |
1 x | 13 mm wing servo holder |
1 x | M2/M1/6 3Diam long black ball link V1 (6 pcs) |
1 x | Straightened rod Ø 0.5 mm x 1000 mm |
1 x | 1/12 Pilot "Fighter" |
1 x | Oracover Yellow CADMIO 10 m |
1 x | Slave-cable USB Easy Sim |
1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 5 mm |
4 x | Connector CAN 15 |
1 x | Glases Ace |
2 x | Racor 4/6 mm |
1 x | Marker ties (20 pcs) |
1 x | Futaba male 40 cm extension |
4 x | Profile ABS Square 3 x 1000 mm |
1 x | Field folding model stand |
1 x | Carbon fiber rod 12 mm x 1000 mm |
4 x | Profile ABS half cane 5.0x1000 mm |
2 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
1 x | Monokote BLUE metalizado (1.8x0.65m) |
1 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
1 x | servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT |
2 x | Xplorer1 anemometro |
2 x | Horn 16,5x20 mm (2 pcs) |
1 x | Motor DLE 200cc Std |
1 x | Copier 5x20 cm pcs |
1 x | Windsock Ozone L - 700 mm |
1 x | Connectors banna oro 0,8 mm (M/F) |
2 x | Quicklock washer 3 mm (10 pcs) |
3 x | Micro control horn T2 Ø 1 |
2 x | Aluminium wide washer M4 Blue (4 pcs) |
2 x | Presto SF Light Filler styrene-free (420 g) |
1 x | Futaba 38 mm servo arm |
1 x | MPX-Dean "T" Adapter |
1 x | Long pinned hinge (6 uds) |
1 x | XH female balance (2S) connector (2 pcs) |
1 x | 12,7x1000 mm 2:1 green termoretract tube |
2 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
1 x | DLE 111 Carb gasket (V1) |
1 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Smoke set "S" |
1 x | Aluminium cap bolt washer M3 black (8 pcs) |
1 x | Silicone 0,14 qmm servos wire Graupner (100 m) |
2 x | ABS Strip 1.5x3.0x1000 mm |
1 x | Gear for MICRO BB |
1 x | Rescue 1,8m2 / BackPack |
1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | 80 mm rods set for direction control |
1 x | Crimping sleeves for 1.1 mm cable (10 pcs) |
1 x | Cap Hispano Aviación |
1 x | Towing hook |
1 x | Z type of cable coupler Ø 1 (2 uds) |
2 x | ABS angle 2,0x2,0x1000 mm |
1 x | Green silicone 0,25 qmm wire (50 m) |
1 x | Gear for D 200 BX |
1 x | 22 mm Cut Disc Proxxon/Dremmel |
1 x | 65 mm mini servo cover |
1 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
1 x | SE Ring 250 mm (2 pcs) |
1 x | 6,4x1000 mm 2:1 black termoretract tube |
1 x | Carbon fiber rod 20 mmx1000 mm |
1 x | Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m |
1 x | SAVOX SH 1250 MG servo digi |
2 x | 12 mm floating pad (49 pcs) |
1 x | Pin type hinge Al 6x98 mm (2 pcs) |
1 x | Cabling for Fox MDM1 wings |
1 x | Servo arms set HS-60/81/85/5082MG/5085mg |
2 x | USB Mini Camera endoscope |
1 x | 1/4 Pilot "Heidi" |
1 x | Carbon fiber rod 5.0 mmx1000 mm |
2 x | Lock washer 3.2 mm (20 pcs) |
1 x | Blind nut M4 (4 pcs) |
1 x | 100 mm rods + T patellas set for direction control |
2 x | RF9 Flight Simulator with Spektrum Controller |
3 x | Quicklock washer 1.5 mm (10 pcs) |
1 x | Ply-Span 450x600/13g Black |
1 x | MIG 29 3D RTF, Servo |
2 x | Connectors banna oro 8,0 mm (Male) 5 pcs. |
1 x | TrainerCord (master-learner) |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
2 x | Gold antispark 4 mm plug |
2 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
1 x | 4,8x1000 mm 2:1 blue termoretract tube |
1 x | 18 mm wing servo holder |
1 x | SE Ring 400 mm (2 pcs) |
2 x | Servo FUTABA S 3072 HV S-Bus |
1 x | M2/M1/6 3Diam short black ball link V1 (6 pcs) |
1 x | Streamline Stainless Steel Tubing 9.0x5.0x1000 mm |
3 x | Glases Flitemaster |
1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
1 x | 1/10 Pilot "Jack" |
1 x | Extinguisher CO2 - 2 Kg |
1 x | ABS tube 3.0x2.0x330 mm |
1 x | Kwik link with arm M3xM2xL24 |
2 x | Round Rod 1,0x1000 mm |
1 x | Propeller Pleg CAM Carbon 20x10 |
1 x | Kwik link AL M4 con Clip (2 pcs) |
1 x | Couple M4 for wire (10 pcs) |
3 x | Servo FUTABA HPS-A700 Digital S-Bus |
1 x | Nylon hinge 15x0,3 (10 pcs) |
1 x | Ball link M2 (10 pcs) |
2 x | 6 mm M3 variable horn |
4 x | U Profile ABS 1,0x2,0x1000 mm |
1 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
1 x | Extractor piñones 2.3/3.2 mm |
1 x | Servo TOPMODEL DS9010 T |
1 x | Ion Pro NG electric with flaps RED Fluor (JP Model) |
1 x | A/C quality beech plywood 600x300x0.6 mm |
2 x | PVC 0,14 qmm servo wire Futaba (5 m) |
1 x | Oracover White 2 m |
2 x | Hobbylite Filler, Balsa colour |
1 x | 4,8x1000 mm 2:1 red termoretract tube |
1 x | Wing OXY 0,5 pulgadas2 |
2 x | Extension silicon 25 cm (Graupner) |
1 x | Green silicone 0,25 mm² wire (25 m) |
2 x | Cable set PREMIUM, fuselage/wing |
1 x | Blind nut M8 (10 pcs) |
1 x | Pin hinge 26x11 mm (10 uds) |
1 x | Angle of incidence meter |
1 x | Horn with ball 40x30 |
1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
2 x | Ferrita 14x8x5.5 mm |
3 x | 1000 ml sealer (DOPE) |
1 x | A/C quality beech plywood 1520x750x3.0 mm |
1 x | Savox Brushless Servo SC-1267 SG |
1 x | ABS tube 20.0x18.0x1000 mm |
2 x | Round Rod 6,0x1000 mm |
2 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
1 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
1 x | Balsa panel 10x100x1000 mm |
1 x | Round Rod 4,0x1000 mm |
1 x | Banna gold connector 2,5 mm (100 M/F pairs) |
2 x | Bag connector 2 mm |
2 x | Carbon fiber rod 3.0 mm x 1000 mm |
3 x | Medium extra-strong control horn with bearing 2,8x24 |
1 x | PIX Hawk with accesories |
1 x | Hitec 52 mm servo arm |
3 x | Red smoke canister 100 g |
1 x | Connectors banna oro 2 mm (M/F) |
2 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
1 x | ABS tube 8.0x6.0x1000 mm |
1 x | Straightened rod Ø 4.0 mm x 1000 mm |
1 x | 1/6 Pilot "John" |
2 x | Red silicone 1,0 qmm wire (50 m) |
3 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
1 x | Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs) |
1 x | Balsa panel 6.0x100x1000 mm |
2 x | Streamline Stainless Steel Tubing 17.8x12.4x1000 mm |
6 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
3 x | "S" set for planes |
2 x | LH long black aluminium horn L31xH30 (2pcs) |
2 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) |
2 x | Glases Nimbus |
1 x | ABS tube 3.0x2.0x1000 mm |
1 x | Ball link M3 (6 uds) |
2 x | EC5-Set male, simple quality, 2 x female pin, 1 x blue housing |
1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
1 x | 10 mm floating pad (72 pcs) |
1 x | Aluminium servo arm (2 uds) |
2 x | Rudder forward 80x28 "type Kato" |
1 x | Cable grommet Ø 6.4 mm (4 uds) |
2 x | Hovercraft sailcloth |
1 x | Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Propeller balancer |
1 x | Spray EC Red 400ml |
1 x | Balsa panel 2.5x100x1000 mm |
1 x | SE Ring HACKER 300 mm (2 pcs) |
1 x | B4-0 rocket charges (6 pcs) |
1 x | Silicone 0,25 qmm servos wire Graupner (5 m) |
1 x | 4,8x1000 mm 2:1 black termoretract tube |
2 x | PVC 0,08 qmm Graupner servos wire (5 m) |
1 x | Squared carbon wing joinner 5x5x220 mm |
1 x | Gates hinge |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
1 x | Servoarm Aluminium SH-82 |
1 x | M3 INDUSTRIAL ball link (2 uds) |
2 x | Painting GHT Lexan Black 150 ml |
1 x | ABS 500 x 400 x 2,0 mm (white) |
1 x | Dremel PERMAGRIT thin lime |
2 x | Glases Moritz |
2 x | 20 g tin paste |
1 x | SE Ring 360 mm (2 pcs) |
1 x | Nylon hinge 20x20x0,3 (10 pcs) |
1 x | LUCAS pilot ARTF |
1 x | 3l Smoke oil |
1 x | Pilot "Anthony" (Slimline) |
1 x | Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor) |
1 x | BALSA trip 2.0x2.0x1000 mm |
4 x | CC 01 |
1 x | Straightened rod Ø 4.5 mm x 1000 mm |
3 x | Cap closure 33/23.5mm (2 uds) |
1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
1 x | HDT Jet Central |
2 x | Black large kwik link (10 pcs) |
1 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
1 x | Prolongador S-Bus JR/JR 20cm |
2 x | ARAMID honeycomb 1300x2600x2 mm |
1 x | Concave-Convex sandpaper file 13 mm |
1 x | Trike XL motor set (motor+esc+prop) |
2 x | Black smoke bombs AX-60 (5 pcs) |
1 x | Circlik for shaft 2.3 mm (10 pcs) |
1 x | SAVOX SH 1290 MG servo digi |
1 x | Cable coupler M2x66 (2 uds) |
1 x | Futaba SBS-02A Air Pressure Telemetry Sensor (FASSTest/T-FHSS) |
1 x | Horizontal servo holder |
1 x | ALU servo arm 3 mm shaft |
1 x | XT-90 connector (pair) |
1 x | 1,6x1000 mm 2:1 red termoretract tube |
1 x | Micro clevis (10 uds) |
1 x | Oratex White 2m |
1 x | ABS tube 9.0x8.0x1000 mm |
1 x | Fresa corte diamante Ø 1.0mm (bola) |
1 x | Carbon fiber flat 1000x3.0x0.5 mm |
3 x | Flap hinge (6 pcs) |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 6 mm |
2 x | Ventral support for AX-18/AX-60 |
2 x | 250 mm / 16 mm Airbrakes |
1 x | Monokote ROJO misil (1.8x0.65m) |
1 x | USB HLS prog. interface |
1 x | Balsa panel 2.0x100x1000 mm |
1 x | Straightened threaded rod M3 - 1m |
1 x | Connectors banna oro 2 mm (M/F) (ultralight) |
1 x | 37 mm PVC transparent battery termo-retract (1 m) |
1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
1 x | Threaded coupler M2,5 Ø 3 mm (10 pcs) |
1 x | Spray adhesive AEROFIX 2 |
1 x | Blue metalic ball link M2/2 azul (2 pcs) |
1 x | Motor A2212/13T |
1 x | ABS tube 5.0x4.0x156 mm |
1 x | Motor DLE 40 cc Twin |
1 x | 1/4 Pilot "Mike" |
1 x | Digital precision scale up to 2000 g |
1 x | 58 mm micro servo cover |
1 x | APM2.6 Power module with 5.3V DC BEC |
1 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
1 x | ABS tube 18.0x16.0x1000 mm |
1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
1 x | Digital scale up to 40 kg |
1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
1 x | 10 mm Quick clamp_L (6 pcs) |
1 x | Fixed launching hook |
1 x | 30 cm BEC cable (female) |
1 x | 6,4x1000 mm 2:1 green termoretract tube |
3 x | Servo FUTABA S 9670 SV |
1 x | Motor DLE 200cc Premium Muffler |
1 x | Futaba 30 mm servo rounded arm |
2 x | Spray adhesive INFUTAC (Clear) 500 ml |
1 x | Horizontal mounting servo holder |
1 x | Fresa corte diamante Ø 1.4mm (bola) |
3 x | Programador FUTABA USB CIU-3 |
1 x | Carbon fiber rod 1.5 mm x 1000 mm |
2 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
1 x | Angle measurer |
2 x | ABS Strip 1.0x3.0x1000 mm |
1 x | Connectors banna oro 8,0 mm (M/F) |
1 x | Pilot "Goose" (Slimline) |
1 x | 12.7 mm 2:1 black termoretract tube |
1 x | ABS tube 2.0x1.0x1000 mm |
2 x | Round Rod 3,0x1000 mm |
1 x | Extension silicon 30 cm female (Futaba) |
2 x | Threaded coupler M2 (10 uds) |
1 x | Oracover Azul Cielo 2 m |
1 x | Piloto Jet "Red" 1/6 Scale |
1 x | Extension S-Bus 1-2 silicon 120 cm FUTABA |
1 x | 25 mm Sandpaper file |
1 x | SPS 70V 100/200 A |
2 x | Joint with bearing M2 22x5,5 |
2 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
1 x | A/C quality beech plywood 600x300x0.8 mm |
2 x | |
1 x | Propeller Pleg CAM Carbon 20x12 |
1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
1 x | Dremel PERMAGRIT 18 mm round lime |
1 x | Extension silicon 75 cm (Graupner) |
1 x | 18m Fitting barb |
2 x | Zurich Sport Sunglasse Dark Sensity BROWN Glasses |
3 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
1 x | Silicon red 1,0 qmm cable ( 25 m) |
1 x | MAX pilot ARTF |
1 x | Copper lacquer wire Ø0,2 mm (5 m) |
3 x | Mixers smoke bombs AX-60 (5 pcs) |
1 x | Z-shaped servo mount |
1 x | Parachutist |
1 x | Cut tube |
1 x | Anodized alum. M3x0,5x20 mm Flat Head screw (4 blue pcs) |
1 x | Conector BEC female (10 pcs) |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | PPM Encoder Module |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 5 m |
1 x | Adapter rotula M3 |
1 x | Buy Perforated film 100 cm / 50 m |
1 x | Set cintas unión paracaídas 145 cm |
1 x | Banna gold connector 2,5 mm (M/F) |
1 x | Connectors banna oro 6,0 mm (M/F) |
1 x | Carbon fiber flat 1000x3.0x0.13 mm |
2 x | Blind nut M2 (10 pcs) |
1 x | Lock washer 2.2 mm (20 pcs) |
1 x | 3 LiPo XH>EH adapter |
1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
1 x | Ply-Span 450x600/13g Yellow |
1 x | Xplorer3 anemometro |
2 x | Straightened rod Ø 5.0 mm x 1000 mm |
2 x | White smoke bombs AX-9 (10 pcs) |
1 x | PowerBox iGyro SRS + GPS Modul |
1 x | Oracover Green10 m |
1 x | CC 05 |
1 x | Servo SAVOX SV-1270 TG |
3 x | Quicklock washer 1 mm (10 pcs) |
4 x | Blue smoke canister 140 g |
1 x | Oracover CARBON Metalic 1 m |
2 x | Futaba External voltage input cable Futaba CA-RVIN-700 |
1 x | Hitec 30 mm servo rounded arm |
1 x | 2,4x1000 mm 2:1 red termoretract tube |
1 x | Angled clevis with threaded rod M3 |
4 x | Small adjustable aluminium control horn with bearing 2,8x15 |
2 x | 2,0x50 mm allen screwdriver |
1 x | Silicone 0,35 qmm servos cable Futaba (5 m) |
1 x | Oracover Yellow CADMIO 2 m |
1 x | Cinta Goldfix 1m |
1 x | Streamline Stainless Steel Tubing 7.5x4.5x1000 mm |
1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
1 x | Crimping tool |
1 x | 19 mm 2:1 black termoretract tube |
1 x | Canopy Lock V1 M3 Blue (2 pcs) |
1 x | 1 m servo "Premium" wire (white/red/blue) |
1 x | M2 5Diam black ball link V2 (2 pcs) |
2 x | Bec MR UBEC 5A (5v/6v/7v) |
1 x | 1/12 Pilot "Cougar" |
1 x | Horns set HS-65HB/MG, 5065MG |
1 x | Nitroverdu 500 ml |
1 x | Birch plywood plate 600x300x4.0 mm |
2 x | Carbon fiber rod 2.0 mmx1000 mm |
3 x | Paint gun for sprays |
1 x | Servo arms set 40/50/55/5055 MG |
2 x | Conector JR/Uni Servo female BLUE silicon (10 pcs) |
1 x | Threaded coupler Micro M2 Ø 0,8 (10 pcs) |
1 x | SERVO DES 806 Pignons |
1 x | Long extra-strong control horn with bearing 2,8x34 |
1 x | Softshell Hispano Aviación |
2 x | Me-163 |
2 x | Small aluminium horn gold (2pcs) |
1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
1 x | Horn 5/10 with M2 Bearing |
2 x | Spannlack 1000 ml |
1 x | Aluminium sheet 500x250x0,5mm |
1 x | MYLAR film A350 (1000x500 mm) |
1 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
1 x | 1/6 Pilot "Tony" |
2 x | Kwik link aluminio IZD. M2.5 L: 23mm (2 uds) pin Ø 1.6 |
1 x | Nylon hinge 20x15x0,3 (10 pcs) |
1 x | 1,5x50 mm allen screwdriver |
1 x | ABS tube 7.0x5.0x1000 mm |
1 x | Savox HV Brushless Servo SB-2270SG (Swashplate) |
1 x | Universal Colour Paste white 50 g |
1 x | Extension 2/3 lipos JST/C |
2 x | Decorative caps, multicoloured, short |
1 x | Red 3m5 mm connector holder |
1 x | Release wax 250ml |
1 x | Foreman, scale 1:32 |
3 x | Connectors MPX male (PIN double) |
1 x | 40 mm 1/4" Race propeller (rigth hydropropeller) |
1 x | Plasti Dip Liquid Tape 429 ml black |
2 x | Protector Connector MPX (1 pair) |
2 x | FX three-position switched channel, long |
1 x | Foam plastic plates (310x210x2 mm) |
1 x | Male connector for 12 pines AWG |
2 x | Universal Colour Paste deep black 50 g |
2 x | MR30 connector male |
1 x | Protector Connector Dean-T (1 pair) |
2 x | Sistema LDS - Ø12 mmr servos Ø 6/25 spline 60º (Futaba) pitch 6 |
1 x | Connectors MPX black male |
1 x | Extension 6 lipos XH > EH |
1 x | 40,0 mm hydro-propeller (left hydropropeller) |
1 x | Plasti Dip Liquid Tape 429 ml black |
2 x | Spinner fixed propeller 42 mm / 5,0 mm |
2 x | Connectors MPX black female |
1 x | MZ-10, 5 Channel HoTT |
1 x | Coupling bush 5 - 5 mm |
1 x | Spinner fixed propeller 60 mm / 5,0 mm |
1 x | Extension 2/3 lipos JST - JST/C |
1 x | Partall paste 650 g |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm |
1 x | Quick hose connector 6-4 mm |
1 x | MPX screwable clips (4 pcs) |
1 x | 120x60 mm SLH KOVO wheel |
1 x | POLARON EX 800w charger |
1 x | Silicone adhesive ELASTOSIL® E4, tube/ 90 ml |
1 x | Propeller Pleg CAM-Prop 10x6 + Spinner |
2 x | 2000A 12V Lithium Jump Starter with 150PSI Air inflator |
1 x | EWC6 40 cm wing connector |
1 x | Interruptor RX/Batterie |
2 x | Small aluminium horn blue (2pcs) |
1 x | MPX PCB "6 Pins", 5 pieces |
4 x | Small adjustable control horn with bearing |
1 x | Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
2 x | Propeller hub spacer 8/5.5 |
4 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Connectors MPX 8 pins with support (black) 1 pair (male-female) |
1 x | Magnetic Interruptor MULTIPLEX |
1 x | Connectors MPX male |
2 x | Electronic switch JETI SP06 Opto |
1 x | Beech dowels 3.0 x 1000 mm |
1 x | JETImodel Addcap 1640 |
1 x | MPX Support (2 pcs) |
2 x | Long horn 50x26 |
1 x | Receiver Crystal 35 Mc/s Ch 62 |
1 x | Mounting frame MPX male connector |
2 x | Extension 5 lipos JST - JST/C |
3 x | Male connector for 16 pines AWG |
1 x | Connectors MPX 8 pins (green) 1 pair (male-female) |
2 x | Female connector for 16 pines AWG |
3 x | Charger LiPo Charger4 |
1 x | EWC3 100 cm wing connector |
1 x | Female connector for 20 pines AWG |
1 x | Extension 5 lipos JST/C - JST |
2 x | Connectors MPX female |
2 x | Kontronik connector (10 connectors, 5 pairs) |
1 x | Magnetic Connect locking system |
1 x | Servo DITEX EL0510M |
2 x | Spray Graphit 33 |
1 x | Female connector JST SH 1.0mm with 10 cm wire |
2 x | Decorative caps, multicoloured |
1 x | Hacker X-Pro USB interface V2 |
2 x | Small control horn with bearing (2 pcs) |
1 x | Connectors MPX female (PIN double) |
1 x | Male prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
1 x | Female connector for 12 pines AWG |
1 x | Distanzstück motor OS 120 AX |
1 x | Receiver replacement antenna, approx. 15 |
2 x | Manometer 4 mm |
1 x | MPX Support |
1 x | MPX screwable clips (5 pcs) |
2 x | Male connector for 20 pines AWG |
1 x | Streamline Stainless Steel Tubing 11.5x6.5x1000 m |
2 x | Cable video GoPro |
1 x | Streamline Stainless Steel Tubing 14.5x9.6x1000 mm |
2 x | Cable video GoPro and 5V cable |
2 x | Modulo telemetria 500 mW/100 mw Radio aire/Tierra Modulo 915 MHz |
1 x | Streamline Stainless Steel Tubing 19.5x9.8x1000 mm |
2 x | TX 250 mW especial GOPRO |
1 x | Streamline Stainless Steel Tubing 15.5x8.5x1000 mm |
1 x | Blind nut M6 (4 pcs) |
2 x | AC-10 pre-rotacion with motor |
1 x | Propeller FALCON 32,5x11 PUSHER Carbono |
1 x | Lock nut M2.5 (10 pcs) |
2 x | Hexagonal Nut M2.5 (10 pcs) |
1 x | Treaded hexagonal socket insert M3 Br (4 pcs) |
1 x | Nut for mounting M5 (4 pcs) |
2 x | Treaded hexagonal socket insert M4 Br (4 pcs) |
2 x | Blind nut M5 (4 pcs) |
1 x | Hexagonal Nut M1,6 (10 pcs) |
2 x | Nut for mounting M3 (10 pcs) |
1 x | Nut for mounting M3 (4 pcs) |
1 x | SE Ring 240 mm (2 pcs) |
1 x | XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 3 cell |
1 x | White silicone 0,25 qmm wire (100 m) |
1 x | Silicone red 1,0 qmm wire ( 1 m) |
1 x | White silicone 0,25 mm² wire (25 m) |
1 x | Silicone red 1,5 qmm wire ( 25 m) |
1 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 2 cell |
1 x | XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 2 cell |
1 x | Silicone black 1,5 qmm wire ( 25 m) |
1 x | Silicone black 1,0 qmm wire ( 1 m) |
2 x | Straightened rod Ø 3.0 mm x 1000 mm |
1 x | Soporte metal para servos |
1 x | Silicone black 6,0 qmm wire ( 1 m) |
1 x | PVC 0,35 qmm servos wire Graupner (100 m) |
1 x | PVC 0,25 qmm servos wire Graupner (5 m) |
1 x | Silicone black 1,0 qmm wire ( 25 m) |
1 x | Silicone 0,35 qmm servos wire Graupner(100 m) |
1 x | Straightened rod Ø 1.2 mm x 1500 mm |
1 x | SERVO DES 568 MG |
1 x | XH female balance (8S) connector (2 pcs) |
1 x | Turnbuckle M2x22/35 (2pcs) |
1 x | Turnbuckle M1,6x20/30 (2pcs) |
1 x | Bungee HLG Premium |
1 x | GameCommander USB Universal |
2 x | Sandwich carbon + poplar 3mm + carbon 290x160 mm |
1 x | Turnbuckle M2,5x32/48 (2pcs) |
1 x | Refueling Cap V3 Black |
1 x | Cylinder for DA-60 and DA-120 |
1 x | Dia. 25x5 mm tefon tube for escape |
1 x | XH female balance (4S) connector (2 pcs) |
2 x | Conector JR Servo female (50 pcs) |
2 x | Cylinder for DA-85/170 (1 piece) |
1 x | Z type of cable coupler Ø 2 (2 uds) |
1 x | Aluminium-screw, M5x20mm Red |
1 x | Cylindergasket DA 170 |
1 x | Carburador DA-35, DA-50R-DA-100L , VM-60/70 |
1 x | Wing conexion 2 servos Futaba 50 cm |
1 x | Exhaust gasket DA-150 |
1 x | Wire easy tensioner (silver) |
1 x | Servo Connector Brackets (10 pcs) |
1 x | XT60 Connector with Holder Male 2pcs |
1 x | Conector AS150 7mm antichispazo (Set: 2 pares) |
1 x | 200 mm extensión servo HITEC/JR |
1 x | Red 4 mm connector holder |
1 x | Exhaust gasket DA-60/120 |
1 x | MR30 connector female |
1 x | wire tensioner (red) |
1 x | Set clevis for pull-pull (TY13233 & TY13234) |
1 x | Conector XT-150 6mm (Set: 5 pares) |
1 x | BOSCH spark plug cap for DA 50-R, DA 100 and DA 150 |
1 x | wire tensioner (blue) |
1 x | Ball bearing middle DA-50/DA60/VM120B2 |
1 x | Switch Cap L (black) |
1 x | X-RAY Micro QR (Elevator) |
1 x | Transmitter Balancer Futaba T-10CG |
1 x | Pan Head Screw M2x6 PH |
1 x | Switch Cap L (silver) |
1 x | Hexagonal Nut M3 (10 pcs) |
1 x | Switch Cap L (Red) |
1 x | Spring lock washer 2.6 mm (20 pcs) |
1 x | X-RAY Micro QR (Fuselage with canopy) |
1 x | Three-function control switch by FUTABA |
2 x | SERVO S9177SV HV S-Bus2 Programable |
1 x | UMX™ Whipit™ DLG BNF Basic (E-flite) |
1 x | Charger FUTABA SQN30W12P-08 220v |
1 x | Glider KNIRPS |
1 x | X-RAY Micro QR (Tail Tube) |
1 x | Transmitter Balancer SPK DX-8 |
1 x | Interruptor FUTABA FX-MZ (2 Posic. corto) |
2 x | BABY glider (Aero-naut) |
1 x | Servo M2x5/16 screw (4 pcs) |
1 x | Hexagonal Nut M4 (20 pcs) |
1 x | Switch Cap M (blue) |
1 x | Turbina X132 H "Compact Version" |
1 x | DINO Glider ARC |
1 x | Quicklock washer 2 mm (10 pcs) |
3 x | Quicklock washer 2.5 mm (10 pcs) |
1 x | Teacher-student connector T12FG/FX-30 |
1 x | Maleta transporte FUTABA 10PX |
2 x | Pan Head Screw M2x8 PH |
1 x | Antena FUTABA 35 mhZ 3PM/3FRF/4V/4Y/6EX/6X/6Y/7C |
1 x | Antenna Hole Cap V1 (Silver) |
2 x | Receiver bed (Blue) |
1 x | Blind nut M6 (4 pcs) |
1 x | Switch Cap M (silver) |
1 x | Servo FUTABA BLS173 SV |
1 x | Transmitter Balancer Futaba FF9-DX7-JR-Hitec |
1 x | Pan head screw M2x16 PH |
2 x | M3 black washers (4 pcs) |
1 x | Pan Head Screw M2x8 PH countersunk head |
1 x | Glider PIROL |
1 x | Servo FUTABA BLS 276SV |
1 x | Socket Screw M3x9 mm |
1 x | Futaba S-Bus Rx/Gyro Link Lead |
1 x | Transmitter Balancer Futaba V |
1 x | Switch Cap M (red) |
1 x | Switch Cap L (Blue) |
1 x | Glider IKARUS |
2 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
1 x | Futaba Aero Large Case - Internal Foam |
1 x | SSPS105 Super Hi-Power servo |
1 x | Tapping Screw M2.9x13 (10 pcs) |
1 x | Adap/Exten for Futaba 12-14C |
1 x | Battery FUTABA 18MZ |
1 x | Switch Cap M (black) |
1 x | Antenna holder bracket double |
1 x | X-RAY Micro QR |
1 x | Neck strap Double V2 |
1 x | BABY glider drawings (Aero-naut) |
2 x | Captador RCEXL para DA |
2 x | Servo FUTABA S 3071 HV S-Bus |
1 x | Yellow smoke canister 100 g |
1 x | ABS Strip 1.5x8.0x1000 mm |
2 x | Blue smoke canister 100 g |
1 x | Smoke set "M" |
2 x | Yellow smoke bombs AX-60 (5 pcs) |
1 x | ABS Strip 1.5x6.0x1000 mm |
1 x | ABS Strip 1.0x4.0x1000 mm |
1 x | ABS Strip 1.5x4.0x1000 mm |
1 x | Yellow smoke canister 65 g |
1 x | ABS Strip 1.5x2.0x1000 mm |
1 x | Strip ABS 2.0x10.0x1000 mm |
1 x | Strip ABS 2.0x3.0x1000 mm |
1 x | Green smoke canister 140 g |
1 x | Red smoke bombs AX-60 (5 pcs) |
1 x | "S" set for boats |
2 x | Yellow smoke canister 140 g |
1 x | PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E |
1 x | Sealing Iron Sleeve PROF |
1 x | Walnut wood slat 1.5x1.5x1000 mm |
1 x | BALSA triangular 6x6x1000 mm |
1 x | Linden wood slat 3.0x3.0x1000 mm |
1 x | Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs) |
1 x | Alu servo arm double RHINO |
1 x | Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs) |
1 x | BALSA trip 8.0x8.0x1000 mm |
2 x | MAMBO 17 |
1 x | Walnut wood slat 2.0x2.0x1000 mm |
2 x | Pine wood slat 3.0x5.0x1000 mm |
1 x | BALSA triangular 15x15x1000 mm |
1 x | BALSA leading edge 8x10x1000 mm |
1 x | Pine wood slat 3.0x10.0x1000 mm |
1 x | Starter 12v (Max 90 and 15ccm) |
1 x | Rubber Insert soft, 1 Pcs. |
3 x | |
4 x | Cooler motor type 300 |
1 x | Sealing Iron Sleeve STD |
1 x | Roller cutter 28 mm |
1 x | Trailing edge BALSA 35x8x1000 mm |
1 x | Set brocas Ø 0.4-0.6-0.8-1.0 mm (4 pcs) |
1 x | Cooler motor type 400 |
1 x | Mahogany wood slat 1.5x1.5x1000 mm |
1 x | Set fresas corte acero-carburo Ø 1.8/2.3 mm (2 pcs) |
2 x | Cooler motor type 280 |
2 x | Soldering tip for KAVAN soldering iron KAV66.8338 |
1 x | Liston HAYA 3 x 10 x 1000 mm |
1 x | Starter EM Gear Power 80 |
1 x | Spinner 42 mm EXTRA 330SC |
2 x | Threaded insert M4 (4 pcs) |
1 x | Hard brass tubing (L 1000 mm, Ø18.0 mm, Ø16.0 mm) |
1 x | Hexagonal Nut M1 (10 pcs) |
1 x | CF tube set (Ø 38 mm y Ø 14 mm) |
1 x | Cotton Flocks, bag/ 7 Kg |
1 x | "Taxi Tank" Fuel Tank |
2 x | WingFix ULTRA Black Edition |
1 x | Simulador RealFlight RF-9.5 S (sin emisora) |
1 x | Birch plywood plate 600x300x3.0 mm |
1 x | 1/6 Pilot "Buddy" |
1 x | VTX 477 Carbon Rotorblade |
1 x | Pan Head Screw M1,6x8 (10 pcs) |
1 x | Straightened rod Ø 14.0 mm x 1000 mm |
1 x | Servo DITEX TD2612S |
1 x | Conector JR Servo male (10 pcs) |
1 x | Paramotor Kit Camo H1.5/ Ben Red |
1 x | Universal batery Tester |
1 x | Legs + electric brakes for Viper Jet 1700 mm |
1 x | Straightened rod Ø 7.0 mm x 1000 mm |
2 x | Avia spare fouselage CF reinforced (Top Model) |
1 x | 25x10 BIELA propeller (3-blades) Corsair Scale |
1 x | Brazo Servo XTorque 52 mm HITEC 25T-6 |
1 x | Premium servo extension 50cm |
1 x | EVP Unit for AXI2208/xx and 2212/xx |
1 x | Moki Carburetor Throttle Arm with Extension |
1 x | Glass fabric 80 g/m² (silane, twill) 100 cm x 10m |
1 x | Trailing leg 131 mm |
1 x | SkyMaxx 1.550 mm (kit) |
1 x | Vertical servo holder |
2 x | Tape GFK 25 mm |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 25 m |
1 x | Universal Colour Paste deep black 250 g |
1 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | Epoxy Resin L + Hardener CL (60 min) kit/ 930 g |
1 x | ABS tube 5.0x3.0x1000 mm |
1 x | Anodized alum. M4x0,7x25 mm Button Head screw (4 blue pcs) |
1 x | Brake for 140 mm wheels |
1 x | HITEC DPC-11 programmer |
1 x | Transmitter SPEKTRUM DX-9 (Only TX) |
1 x | BLUE Colored Liquid smoke for turbine 0.75 l |
1 x | Straightened rod Ø 5.5 mm x 1000 mm |
1 x | Adapter lead MPX/XT60 |
1 x | Fast'n EZ-CA-Hinge (12 uds) |
1 x | Motor DLE 170 M- Paramotors |
1 x | Tank gas KUZA 500 cc |
1 x | Shirt Hispano Aviación |
1 x | Extension silicon 100 cm (Graupner) |
1 x | Savox Brushless Servo SC-1251 MG |
1 x | Balsa panel 1.5x100x1000 mm |
1 x | Teacher-Pupil-cable all FrSky Transmitter |
1 x | switch 1-Spring-UP 3-position DC Tx DUPLEX 2,4EX |
1 x | 40 mm servo arm with bearing (2 pcs) |
1 x | TARANIS X9D - plus EU/LBT FrSky complete set w. travel case incl |
1 x | Receiver FrSKY Archer R8pro 2,4 Ghz |
1 x | Holder for DC Transmitter/Tray DUPLEX 2,4EX |
1 x | Harness for transmitter JETI DUPLEX |
1 x | DUPLEX 2,4EX Stick with Potentiometer for Transmitter DC/DS |
1 x | PWC6 PowerWingConnector for 6 servos with fuselage socket |
1 x | Mono-Switch Memory FUTABA |
1 x | DRIVE 550 (KIRA 500-26 6,7:1 + KOBY 55 LV) |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
1 x | FOD Screen K140G/K180G/K210G |
1 x | Bluetooth Adapter JET CENTRAL |
1 x | KIRA 400-34 |
1 x | Futaba T6K-V2 8Ch 2.4 GHz T-FHSS Air |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
1 x | Futaba F14 Twin Boat Stick |
2 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
1 x | KIRA 400-27 |
2 x | Kerostarter K30G |
2 x | Ø 28 mm fiberglass motor-holder for electric motors |
1 x | Disipador para motor Hacker B 20 (or motors up to Ø20 mm) |
1 x | FIALA Propeller 22x10 |
2 x | Combo FOXY C3530-570 + FOXY 80 amp |
2 x | FIALA Propeller 24x12 |
2 x | TAKEO 3.6m electric |
1 x | Motor Mount for Multiplex FunJet |
1 x | FIALA 22X8 WOODEN 3-BLADE PROPELLER (GAS) |
2 x | Propeller G-Sonic 20x8 |
1 x | Fiberglass motor-holder for electric motors |
1 x | 30/11-26 Zoll, 3-Blade Scale |
1 x | Metalic motor holder for class 550-600 |
1 x | PHASOR RACE 2035/2100 2D |
1 x | Bearings for motor HACKER C50 |
1 x | FIALA Propeller 28x10 |
1 x | Electronic switch JETI SP6 0-15v/6A |
2 x | Electric coversion set |
1 x | Chili F3K 2 wing servo mounted |
2 x | Futaba S9650/9670SV - Upper Case |
1 x | Fiberglass motor-holder for electric motors |
1 x | FESTO connector M7 barb fitting 4mm |
1 x | Motor Mega AC 16/15/07 COMBAT |
1 x | Hexagonal Nut M2 (10 pcs) |
1 x | ASPIRE Red ARF 2.000 mm, Set Elevators |
1 x | Tapping Screw M2.2x9.5 (10 pcs) |
1 x | VIPER SL YELLOW PNP 2270 mm |
1 x | Tank BULL MØ1 (3.2 L) + 1x (0.9 L) + 1x (0.9L Smoke) PRO |
3 x | Frontal Adapter for AXI53xx |
1 x | F-16 Scale 1:6, Electric retract landing gear |
1 x | FESTO Blanking plug G1/8 |
1 x | Electric Landing Gear ASPIRE |
1 x | Festo 4mm Tubing Holder (10 uds) |
1 x | Cockpit plastic closing |
1 x | Electric Landing Gear GALEB G4 |
1 x | Motor Mega AC 16/35/01 |
1 x | Motor Advance 50-6 |
1 x | Motor Scorpion HKIII 4035-560 Kv |
1 x | VARIO module Hott |
1 x | Nylon Screw M6x40 |
1 x | Receptor FUTABA R3106GF T-FHSS |
1 x | Receiver FUTABA R6004 FF FAST |
1 x | Futaba R3008SB T-FHSS 2.4GHz S.Bus2 8/32 Channel Receiver |
1 x | Screw M2.5x20 (10 pcs) |
1 x | R6106 HF 2,4 GHz receiver |
2 x | Flat washer 1.7 mm (20 pcs) |
1 x | Screw M2x6 (10 pcs) |
1 x | Screw M2.5x5 (10 pcs) |
1 x | Screw M3x12 (10 pcs) |
2 x | Aluminium cap bolt washer M3 green (8 pcs) |
1 x | M3-M4 rubber washer (8 pcs) |
1 x | Giant Scale Muffler D.A. 70 |
1 x | Servo HBS 690BB HV Digital |
1 x | Quicklock washer 3.5 mm (10 pcs) |
2 x | Wingstabi 9 DR M-Link Receiver |
1 x | Pilot "Duke" Legends Series (Slimline) |
1 x | Militarian pilot "Fly Boy" size 9cm (Slimline) |
1 x | Receptor FUTABA R7003SB FASST |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm |
1 x | Receiver FUTABA R7014SB FASST Test |
1 x | Lock nut M5 (20 pcs) |
1 x | Antena FUTABA R7108/7014/7114SB (1 pc) |
1 x | R617 FS 2,4 GHz receiver |
1 x | Civilian pilot "Pamela" size 9cm (Slimline) |
1 x | Receptor FUTABA R7208SB FASSTest SBus2 |
1 x | Screw M2.5x8 (10 pcs) |
1 x | Giant Scale Muffler SLIMLINE D.A. 100 (2pcs) |
1 x | Transmitter Crystal 35 Mc/s Ch 77 |
1 x | Hose clips 6 mm |
1 x | SERVO DES 707 BB MG |
1 x | Long Switch On/Off micro |
1 x | Receiver GRAUPNER GR-12 HoTT |
3 x | EWC3 40 cm wing connector |
1 x | Spray YELLOW Inca Lexan 150ml |
2 x | Epoxy L 40 min. (1 Kg) 715g Resina / 285g Hardener S (15 min) |
1 x | Silicone black 0,5 qmm wire ( 25 m) |
1 x | Propeller APC 5x5 |
1 x | Propeller APC 6x4 Electric Pusher |
2 x | Propeller APC 22x12 WE Electric |
1 x | Propeller APC 20x12 WE Electric |
1 x | Propeller APC 26x15 Electric |
1 x | Propeller APC 4.5x4.1 |
1 x | Propeller APC 19x10 Electric |
1 x | Propeller APC 5x3 |
1 x | Ø 0,5 mm Pull-Pull Kevlar Line (3 m) |
2 x | Aluminum Bayonet / strongal D35 mm / 1 m |
1 x | Reed valve petal for DA 35/50R/100l carburator |
1 x | Piston pin for DA-60 DA-120 |
1 x | Conector JR Servo female (10 pcs) |
1 x | LA500 tail empennage |
1 x | Short reed valve petal for DA 100-R carburator |
1 x | Silicone 0,14 qmm servos wire Graupner (5 m) |
1 x | Pin 2,5 to cable coupler M2,5 ⌀ pin 2,5 (6 pcs) |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
1 x | USB Adaptor OPTronics |
1 x | XH male balance (3S) connector (2 pcs) |
1 x | Servo GO-1023MG 7.0 kg.cm 0.09s/60º |
1 x | Raer wall |
1 x | Pulley brass 14/2 (2 pcs) |
1 x | Porta Kwik link M4 3 mm (2 pcs) |
1 x | Propeller APC 22x10 Electric |
1 x | Propeller APC 19x12 WE Electric |
1 x | Propeller APC 19x8 Electric |
1 x | Propeller MENZ-S 15x10 |
1 x | Propeller MENZ-S 21x10 3-Blades |
1 x | Propeller APC 5.5x4.5 |
1 x | Propeller MENZ-S 17x8 |
2 x | PowerBox Smokepump JETs 2x outside |
1 x | Glass fabric 25 g/m² (1 m²) |
1 x | 3,2 mm Prop Adapter M6 |
1 x | Catalog AERO-NAUT 2016 |
1 x | Spinner propeller pleg. 30 mm / 2,3 mm |
1 x | Regulador NAVY 540R |
1 x | Reguladro ACTROCON 60A |
1 x | Transom 40 mm |
1 x | Motor ACTRO 35-4-1100 |
1 x | Z Spinner (CN) 35mm |
1 x | SC NAVY V15R |
1 x | Hardener Aero EPH 161 (250 g) |
1 x | Hardener EPIKURE™ Curing Agent MGS™ LH285, bottle/ 800 g |
1 x | LENTUS Multiplex Fundas alas |
3 x | PH5 adapter for 5mm M8 axi for AXI2820 y 2826 |
1 x | LENTUS Multiplex Landig gear retract |
2 x | Falcon Carbon Spinner 82mm for electric motor |
3 x | Spinner Alumin. fixed propeller 50 mm / 4,0 mm |
1 x | Spinner Alumin. fixed propeller 45 mm / 5,0 mm |
2 x | Cono NUT 5/16"x 24 -M4 |
3 x | Spinner Alumin. fixed propeller 50 mm / 5,0 mm |
2 x | 70 mm INO spinner (carbon imitation) |
1 x | Extension silicon 50 cm (Graupner) |
1 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | Reed valves with doubler, set for DA 85/100/120 |
1 x | Silicone black 2,5 qmm wire ( 1 m) |
1 x | LA500 pre-rotation gear hub |
1 x | Spare Part Frame Set for EACHINE RACER 250 |
1 x | Reed valve for DA 50-R |
2 x | Cierva C30 Elevator |
1 x | LA500 rotor head core |
2 x | Prop washer DA-50R/60/70 |
1 x | Reed valve for DA-60/70 |
2 x | XH male balance (8S) connector (2 pcs) |
1 x | Head core |
1 x | Silencer with rear exhaust DA-120 |
2 x | Pick up DA50/100/150 |
1 x | Tren retractil ULTIMATUM 1.5 combo ER30 SEt B (ControlBox) |
2 x | Piston ring for DA-60 and DA-120 |
1 x | Head runner |
1 x | OS 40-FG 4T Motor |
1 x | Piston DA-85/170 |
1 x | Ø 2,5 mm pin for Kwik link MPJ2170/2173 (6 pcs) |
1 x | Conector JR Servo female (10 pcs) |
1 x | HOPPER tank Digitech 250 ml (Festo nipples 6 mm) |
1 x | Pulley brass 4/1,5 (2 pcs) |
2 x | Steel conrod DA-50R and DA-60 |
1 x | Pulley brass 16/2 (2 pcs) |
1 x | Pilot LA 500 |
1 x | XH female balance (6S) connector (2 pcs) |
1 x | Motor NGH GF30 |
1 x | Rotor Mast |
1 x | Contest-S-Pult-Carbon mc-20/mc-24 |
1 x | Glidder Mü13e (Bergfalke) |
1 x | White smoke canister 140 g |
1 x | Light System |
1 x | Catalyst INSTA - SET™ (60g) |
1 x | DEMON CORTEXpro |
1 x | Cyano INSTA - CURE™ Pocket (18g) |
2 x | |
1 x | Electric Landing Gear BULL Mo1 2.6 (Elektron Retracts) |
1 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
1 x | VIPER JET G2 Esq. 3 Orange/Black |
2 x | Green smoke canister 65 g |
3 x | Indoor Brushed motor kit |
1 x | FELIX SportJet Blue/Green 2200 mm |
1 x | FELIX JR Red/Yellow 1750 mm |
1 x | "M" set |
1 x | VIPER 1.7 Electric break wheels + structure |
1 x | A/C economy plywood 600x300x6+.0 mm |
3 x | Cooler motor type 150 |
1 x | Motor holder for AC 28/7 |
1 x | Tool for entel |
1 x | Tool for entel |
1 x | Tachometer Hyperion Multi-pala |
1 x | AXI 2826/12 V2 |
1 x | Tank BULL MØ1 4L (CMJets) |
1 x | SBEC 30 D |
1 x | ANGEL 48" pp red/blue/white |
1 x | Propeller MENZ-S 17x10 |
1 x | 6 mm red aluminium threaded horn with patella |
1 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
1 x | Electric Fuel pump |
2 x | Electric Fuel Pump 12V |
1 x | KingTech Turbineoil 5L |
1 x | Clamp K30 G3 |
1 x | KingTech T-Modul 5 in 1 Telemetry |
1 x | Turbine KingTech K30G Restart |
1 x | Filter KingTech |
1 x | Fiberglass plate 620x540x1,0 mm |
1 x | Carbon tube 3K-Matt (L 1000 mm, Ø25 mm, Ø23 mm) |
2 x | Motor mount M |
1 x | Motor mount for 1200 mm models |
1 x | Mould Resin P 10 kg |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
1 x | Fundas para el transporte F3A alas |
1 x | SBEC 40 |
1 x | Lipo KAVAN 5000 mAh 11.1v 40/80C |
1 x | SBEC Jeti |
1 x | PSC 5 |
1 x | Rudder forward 70x28 "type Kato" |
1 x | Turbina KINGTECH K65 G4+ |
1 x | Turbina KINGTECH K70G4 |
1 x | GSU Kingtech |
1 x | Turbina KINGTECH K55G4 |
1 x | KingTech K45TP G4 Turboprop |
1 x | Scale exhaust K100TP |
1 x | Spinner propeller pleg. 40 mm / 6 mm |
1 x | Turbina KINGTECH K320 G5 |
1 x | Turbine KingTech K45G4+ |
1 x | CA Glue fast 20g |
1 x | Ø 40 mm fiberglass motor-holder for electric motors |
1 x | Motor holder AXI |
1 x | Carbon plate 1000x500x2,0 mm ECOTECH |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | Thixotropic agent tin/ 15 g (approx. 350ml) |
1 x | Size "L" motor holder for class 600 |
2 x | Size "M" motor holder for class 400 |
1 x | A50 Motor Mount Alu complete set |
1 x | Central support Speed 600 |
1 x | Cables suitable for the motor AC 28/7 |
2 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
1 x | Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm) |
1 x | Beech dowels 4.0 x 1000 mm |
1 x | Floating M3 washer pad (36 pcs) |
1 x | Battery charging cable XT60 |
1 x | TP/TopFuel - JST-EH 4/5S Adapter |
1 x | Dean "T" - Futaba Adapter |
1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
1 x | Ion Pro, Elevator (JP Model) |
1 x | Fiberglass plate 620x540x0,2 mm |
1 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
2 x | IKURA 4.0 m |
1 x | Helice FOXY 22x10 2-Bl |
1 x | 10 mm gas motor standoff |
1 x | QS Bulkhead Valve 4/4 mm |
1 x | Screw M4x12 (10 pcs) |
1 x | Screw M3x30 (10 pcs) |
1 x | Receiver R7008SB FASSTest |
1 x | Telemetria XYCOY adapter |
2 x | Sandwich carbon + poplar 3mm + carbon 480x290 mm |
1 x | Turbina X45 H "Light Version" |
1 x | MZ-12, 6 Channel HoTT |
1 x | Propeller MENZ-S 28x16 |
1 x | Propeller MENZ-S 23x10 3-Blades |
1 x | Propeller MENZ-S 28x8 |
1 x | Propeller MENZ-S 22x8 3-Blades |
1 x | PowerFuel RX V2 Fuel Pump |
1 x | Bird (Aero-naut) |
1 x | CAM-Carbon Light Prop 10x5" (Prop left) |
1 x | Bisagra de remo metal 28 mm de largo (2 pcs) |
1 x | Boat 43 mm (5 pcs) |
1 x | BALSA trip 3.0x5.0x1000 mm |
1 x | Block 21x19 mm (5 pcs) |
1 x | Albatros ,spare fuselage (Top Model) |
1 x | Fascination 3600 mm, Spare Elevator (Top Model) |
1 x | Flip ARF (Top Model) |
1 x | Fascination 3600 mm (Top Model) |
1 x | Albatros ,spare cockpit (Top Model) |
2 x | 89 mm INO spinner (carbon imitation) |
2 x | Spinner INO 70 mm Chrome (Imitacion metal) |
2 x | 51 mm INO spinner (carbon imitation) |
1 x | Spinner INO 75 mm Chrome (Imitacion metal) |
2 x | Spinner INOVA 102 mm Black |
2 x | 57 mm INO spinner (carbon imitation) |
1 x | Carburetorgasket DA-85, DA-100, DA-100L and DA-120 |
1 x | Metal gasket elbow/cilinder DA60R/DA120 |
1 x | Metalic joint for DA-50R/DA100 cilinder/elbow |
1 x | 3 mm metalic joint for DA-35 or DA-75 cilinder/elbow |
1 x | Prop hub for DA 150/200, old version |
1 x | Reed valve carrier, without reed valves DA-150L/170 |
1 x | Spring for jet needle, fits DA-60/70 |
1 x | Boomerang SPRINT V2 Red/Yellow |
2 x | MB-339 Aermachi 84" ARF c/retractil electric |
1 x | Glow filter |
1 x | TURBINATOR 2 RED/WHITE 1778 mm Combo |
1 x | OSD Telemetry sensor |
1 x | White 2,4 GHz antenna exit guides (2 pcs) |
1 x | MZ-18, 9 Channel HoTT |
1 x | LA500 pilot-seat set |
1 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 3 cell |
1 x | LA500 cyclic central part |
1 x | Silicone black 4,0 qmm wire ( 1 m) |
1 x | 50m servo "Premium" wire (white/red/blue) |
1 x | Reed valve carrier for DA-85, DA-100L and DA-120 |
1 x | Piston pin for DA50R/DA100 |
1 x | Propeller MENZ-S 26x12 3 blades |
1 x | Propeller MENZ-S 34x10 |
1 x | Propeller MENZ-S 22x12 3 blades |
1 x | Propeller MENZ-S 32x12 |
1 x | Propeller MENZ-S 32x10 |
1 x | Propeller MENZ-S 27x12 |
1 x | Propeller MENZ-S 28x14 |
1 x | Propeller MENZ-S 34x12 |
1 x | 100 mm rods set for direction control |
1 x | Propeller MENZ-S 32x18 |
1 x | Propeller MENZ-S 22x8 |
1 x | Propeller MENZ-S 24x12 |
1 x | Propeller MENZ-S 29x10 |
1 x | PowerBox Smokepump |
1 x | FESTO Polyurethan tube for turbine 4x2,5x1000 mm (transparent) |
1 x | Block 1Rolle 3x7x3 mm (5 pcs) |
1 x | Bocina Ms 18 mm (3 pcs) |
1 x | CAM-Carbon Light Prop 10x5" (Prop right) |
1 x | Cable pass Ms 9x5 mm (10 pcs) |
1 x | Cabestrante 13 x12 mm (5 pcs) |
1 x | BOX-Setup Actro-marine |
1 x | Aqua RACE 70 (without motor) |
1 x | Boat 140 mm |
1 x | Block 1Rolle 5x7x3 mm (5 pcs) |
1 x | Cabestrante plastico 5x6 mm (10 pcs) |
1 x | CAM-Carbon Light Prop 12x5" (Prop left) |
1 x | Brass wire 0.5 mm (25 m) |
1 x | Cadena 1.0mm x 1 m |
1 x | HERON RR |
1 x | Aero-Master Cabine (Aero-naut) |
1 x | Servo Mount M (blue) |
1 x | Aero-Master Wings (Aero-naut) |
1 x | IKURA GPS 4.28 m |
1 x | BIG MOSNTER |
1 x | DELPHIN Race 3.6m c64 |
1 x | FOX 3000 mm ARF (FMS) |
1 x | EASYGLIDER 4 RR |
1 x | Aero-Master Fuselage (Aero-naut) |
1 x | ALBATROS 3.0 m (orange/white) |
1 x | Fascination 3600 mm ARC |
1 x | ENIGMA ARF |
1 x | Challenger ARF (Top Model) |
1 x | Avia (Top Model) |
1 x | Avia spare blue cockpit (Top Model) |
2 x | 8 mm Adapter for AXI53xx |
1 x | Astra wing Joinner (Top Model) |
1 x | Fascination 3600 mm, Canopy (Top Model) |
1 x | FANTASY ARF 3.2m |
2 x | PH6 adapter for 6mm M10 AXI for AXI41xx |
1 x | ASG 32 560 mm |
1 x | Gracia (Top Model) |
1 x | 57 mm white plastic spinner for fixed propeller / 4,0 mm axi |
2 x | Spinner INOVA 63 mm White |
1 x | 75 mm INO spinner (carbon imitation) |
2 x | Spinner INOVA 45 mm White |
2 x | 51 mm white plastic spinner for fixed propeller / 4,0 mm axi |
1 x | F3A carbon 82 mm spinner for 12 mm axis |
2 x | 38 mm white plastic spinner for fixed propeller / 4,0 mm axi |
2 x | Spinner INO 63 mm Chrome (Imitacion metal) |
2 x | Spinner Alumin. fixed propeller 45 mm / 3,2 mm |
2 x | Spinner Alumin. fixed propeller 45 mm / 6,0 mm |
2 x | 63 mm INO spinner (carbon imitation) |
2 x | Spinner Alumin. fixed propeller 50 mm / 6,0 mm |
2 x | Spinner INO 51 mm Chrome (Imitacion metal) |
1 x | Servo Fork |
2 x | Spinner Alumin. fixed propeller 50 mm / 3,2 mm |
1 x | F3A carbon 85 mm spinner for Hacker Q-80 |
1 x | F3A carbon 75 mm spinner for Hacker C-50 |
1 x | Spinner plastic white fixed propeller 51 mm |
1 x | Spinner Alumin. fixed propeller 45 mm / 4,0 mm |
1 x | F3A carbon 85 mm spinner for AXI |
1 x | 45 mm white plastic spinner for fixed propeller / 4,0 mm axi |
2 x | Spinner 82mm Black ventilado |
1 x | 82 mm INO spinner (carbon imitation) |
1 x | 82 mm 12 mm axi 30 g F3A CF drilled spinner 3BL |
1 x | Spinner plastic white fixed propeller 45 mm |
2 x | Spinner INO 57 mm Chrome (Imitacion metal) |
2 x | F3A carbon 80 mm spinner for Spark EVO |
1 x | 82 mm 12 mm axi 30 g F3A CF drilled spinner |
1 x | Nut for 515/518/519 spinner special for Hacker |
1 x | Ignition unit for DA-70/100/120/150/170/200 |
1 x | Aluminium-screw, M5x16mm Red |
1 x | Spring Clip 25 mm teflon tube |
1 x | Stainless steel silencer for DA 150/150L |
1 x | Stainless steel silencer for DA 150/150L |
1 x | Motor NGH GT-17 |
1 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 2 cell |
1 x | Cyano SUPER - GOLD™ Pocket (18g) |
1 x | Cyano INSTA - CURE™ (225g) |
1 x | Cyano INSTA - FLEX+™ (25g) |
1 x | L-39 Albatros 138"/3.5m lenght ARF |
1 x | BU 131 Jugmann Panel Instrum. trasero |
1 x | RANGER Jet CANADA 1.854mm combo |
2 x | Universal Prop Saver |
3 x | RANGER Jet Red/White 1.854mm combo |
1 x | Boomerang ELAN THUNDERBIRD Combo |
1 x | Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø36 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø27 mm) |
1 x | SPS 70V 140/280 A |
1 x | FIALA Propeller 23x8 Electric |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø20 mm, Ø18 mm) |
1 x | Receptor CORE PBR-26XS 26ch |
1 x | switch 1-Spring-DOWN 3-position DS Tx DUPLEX 2,4EX |
1 x | Boomerang ELAN STARS & STRIPES Combo |
1 x | ASK 21 6.5m + pylona |
1 x | AXI Cooler 22xx |
1 x | Radial Mount Set for AXI2814 and AXI2820 V2 |
1 x | Boomerang SPRINT V2 Red/White/Blue |
1 x | Boomerang SPRINT V2 Yellow/Black |
1 x | RANGER Jet NAVY 1.854mm combo |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø22.5 mm) |
1 x | Carbon fiber rod 1.5 mm x 2000 mm |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø8 mm, Ø6 mm) |
1 x | FIALA 22X8 BLACK WOODEN 3-BLADE PROPELLER (GAS) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø19 mm, Ø15 mm) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø12 mm, Ø10 mm) |
1 x | FIALA 20X6 WOODEN 3-BLADE PROPELLER (GAS) |
1 x | Fibra de vidrio 80 g/m² (2 m x 100 cm) |
1 x | MOTOR MOUNT RODS AXI 53XX AND AXI 81XX 60MM (4PCS) |
1 x | Radial heatsink for MPJ AC25/35-xx motor |
1 x | Liston HAYA 10 x 10 x 1000 mm |
1 x | TURBINATOR 2 BLUE AND YELLOW 1778 mm Combo |
1 x | RANGER Jet Red/Yellow 1.854mm combo |
1 x | TURBINATOR 2 ORANGE/SILVER 1778 mm Combo |
2 x | Prop Holder AXI 41xx V2 |
1 x | Prop Saver for AXI 22xx/xx |
1 x | Fully Threaded Steel Rod Duralumin 100 mm M3 (2 pcs) |
1 x | VIPER JET 2.2m + Electric landig Gear Deco: 01 Red-Blac-kWhit |
1 x | FIALA Propeller 16x6 |
1 x | AXI Cooler 41xx |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø14 mm, Ø12 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø14 mm, Ø12 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø40 mm, Ø36 mm) |
1 x | FIALA Propeller 18x10 |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | FIALA Propeller 25x10 |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø26 mm) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm) |
1 x | Jeti Spin 99 OPTO |
1 x | Motor KAVAN PRO 2225-1600 |
1 x | Waterproof adhesive tape, width 19mm, length 25m |
1 x | Mobile Terminal |
1 x | A/C quality beech plywood 600x300x6.0 mm |
1 x | Oracover GREY Seafire Sea 2m |
1 x | wing/fuselage connector for 3 pines AWG 20-24 |
1 x | Parachute P4 |
1 x | Sandwich carbon + poplar 4mm + carbon 480x290 mm |
1 x | Sandwich carbon + poplar 2mm + carbon 290x160 mm |
1 x | Sandwich carbon + poplar 2mm + carbon 480x290 mm |
1 x | Midi Fan |
1 x | Brass control horn M3 short for wire (2 pcs) |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 4 mm |
1 x | Switch for DS: Long 2 Position |
1 x | Car Charger DC/DS-16 |
1 x | Turbine DS-51-DIA HST + DSM 4625-1100 + YGE 90HV |
|
167,084.99EUR |