Top » Catalog » Hardware » Power supply system/Data Recordi » Jeti » JETCB3202+

534.01EUR

DUPLEX 2.4EX Central Box 320 + 2x Rsat2 + RC Switch
[JETCB3202+]

JETI DUPLEX 2.4EX Central Box 320 + 2x Rsat2 + RC Switch

Product description and features
The Central Box 320 is designed for a complete management of multiple servos and two receiver batteries for a model with high security requirements.The Central Box 320 has an overload protection on each servo output, 8 channels for high-performance servos up to 60 kg / cm and 10 channels for standard servos up to 30 kg / cm. Especially for the use of powerful and power-hungry servos, the Central Box 320 has an aluminum housing for better cooling. The Central Box 320 offers true battery redundancy, DITEX servo telemetry, JETI EX telemetry and up to three receiver inputs (2x 2.4GHz and 1x 900MHz) for full power and RF signal redundancy.

Configuration via JETI Duplex DS/DC transmitters
With JETI Duplex DC/DS transmitters, the full potential of the Central Box 320 can be fully exploited. The device overview of the JETI Duplex DS/DC transmitter makes it easy to perform the entire configuration of the servo outputs, DITEX servo and JETI EX telemetry, function assignment, and more.

Compatibility with Futaba
The Central Box 320 can also be used with two S.Bus receivers (e .g Futaba R7003SB). Setting up and reading out the telemetry values must, however, be realized with a separatly available JETIBOX.

Switching on and off
The switching on and off process of the Central Box 320 is done with the supplied R/C switch.

Recommended receivers
Two compatible RSat2 receivers are included. Optionally, the use of a REX Assist receiver in combination with a RSat2 receiver is possible, so you get a Central Box with gyro stabilization.

Features
Adjustable powerful BEC for voltage stabilization (connection of standard or HV servos)
DITEX servo telemetry support
Possibility to connect up to 3 receivers with serial communication
built-in Expander function with the possibility of independent connection of up to four JETI EX sensors
Input for magnetic switch or RC switch
Power supply batteries connected via MPX connector
100Hz mode of servo outputs (10ms period)
EX telemetry support (measurement of voltage, current, capacity, temperature, etc.)
Easy settings changes via DC/DS transmitter („Device explorer“)
Robust metal construction with mounting holes

temporarily out of stock

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
    Bavarian Demon
    Dymond
    Eagle Tree
    Emcotec
    Futaba
    Jeti
    PowerBoxSystems
    ROI IMPORT
    SebART
    Setlo
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Brazo servo MKS Doble Metal L:2.5/3 inc
26.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

2 x	Propeller 3x2
2 x	Propeller 3x3
1 x	Propeller 10x4,7 SlowFlyer
2 x	Propeller 9x7 SlowFlyer
1 x	Propeller 9x4,7 SlowFlyer
1 x	Propeller 8x4,3 SlowFlyer
1 x	6 mm blue aluminium threaded horn with patella
1 x	Horn with ball 40x30
1 x	Horn 6/27 with M3 Bearing
2 x	Horn 16,5x20 mm (2 pcs)
1 x	Threaded coupler ALU Left M2,5 Ø 3 (2 uds)
2 x	RH long aluminium horn (2pcs)
1 x	Horn 6/20 with M3 Bearing
2 x	Horn 20x28,5 mm (2 pcs)
1 x	SlowFlyer control horn (3 pcs)
1 x	Brass control horn M3 short for wire (2 pcs)
2 x	Small aluminium horn gold (2pcs)
2 x	Horn 5/10 with M2 Bearing
1 x	Brass control horn M4 short for wire (10pcs)
2 x	Brass control horn M2 short for wire (2 pcs)
1 x	Threaded coupler ALU Left M3 Ø 4 (2 uds)
2 x	Small aluminium horn red (2pcs)
1 x	Cable control set
2 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	Horn with ball 55x40
3 x	Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x	Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x	Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x	Brass control horn M4 short for wire (4 pcs)
1 x	Horn 5/15 with M2 Bearing
1 x	20 mm carbon horn
1 x	Horn 5/20 with M2 Bearing
2 x	Ferrita 27x14x7 mm
2 x	Ferrita 14x8x5.5 mm
3 x	Propeller balancer
1 x	Angle of incidence meter
1 x	Truck-trailer for gliders 720 x 239 mm
2 x	Medidor ángulos y/o incidencias
2 x	Surface Indicator Gauge Small
2 x	Truck-trailer for gliders 720 x 285 mm
1 x	Towing hook
1 x	Spring lock washer 2.6 mm (20 pcs)
1 x	Threaded coupler M2,5 Ø 2 mm (10 pcs)
1 x	Spring lock washer 4.1 mm (20 pcs)
1 x	Green smoke canister 65 g
1 x	Z type of cable coupler Ø 2 (2 uds)
1 x	Profile ABS Square 1 x 1000 mm
1 x	Partall paste 650 g
1 x	Piloto Jet "Red" 1/6 Scale
1 x	1/6 Pilot "Cindy"
1 x	1/12 Pilot "Tom"
1 x	200 mm extensión servo HITEC/JR
1 x	Soporte grifo FESTO (2 pcs)
1 x	Tube support Ø 6mm (10 pcs)
1 x	Cable with accesories
1 x	Micro control horn (2 pcs)
2 x	Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 6 mm
1 x	Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 m
2 x	Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm
1 x	Small adjustable aluminium control horn with bearing 2,8x15
1 x	Horn mando long (2 pcs)
1 x	Horn F3A de Titanium 16 mm (2 units)
1 x	Servo HBS 690BB HV Digital
1 x	Propeller balancer
1 x	Futaba S9650/9670SV - Upper Case
1 x	SERVO DES 588 BB MG
1 x	Servo MKS HV6120H
2 x	Red aluminium servo arm V1-Futaba 17 mm M2
1 x	Servo inverter
1 x	Servo Robbe FS 525 BB MG HV
1 x	Blue aluminium servo arm V2-Hitec 1,0 inch M3
1 x	WingFix ULTRA Black Edition
1 x	Gold aluminium servo arm V2-JR 1,25" inch M3
2 x	Angle measurer
1 x	Propeller POWER-PROP 13x10
1 x	Propeller POWER-PROP 15x10
1 x	PROPELLER ELECTRIC glass 9,5x6
1 x	Propeller electric carbon 9.5x7
1 x	Propeller electric carbon 9.5x6
1 x	Propeller electric carbon 10.5x7
1 x	Propeller POWER-PROP 10x7 Izda
2 x	Propeller POWER-PROP 12x8
1 x	Propeller electric carbon 10.5x8
2 x	Propeller POWER-PROP 12x9
1 x	Dumper propeller 6/8 mm
1 x	Porpeller HUNTER 400
2 x	Propeller POWER-PROP 15x8
1 x	Propeller POWER-PROP 11x8
1 x	Propeller electric carbon 6x5
1 x	Propeller POWER-PROP 14x12
2 x	Nut M2 securing
1 x	Baering 3x8x4
2 x	Raer wall
2 x	Blade holder center
2 x	Nut M1,6
2 x	Head core bushing
2 x	Steering lever
1 x	Connector Sub-D 2+5 Male
1 x	Battery charging cable XT60
1 x	DPSI Ampere battery backer
1 x	Cabel charger transmitter GRAUPNER
1 x	Adapter lead MPX/EC3
1 x	Propeller APC 5x5
1 x	Propeller APC 9x7.5 SF
1 x	Propeller APC 10x3,8 SF
1 x	Propeller APC 4.1x4.1 Electric
1 x	Propeller APC 8x6 Electric
1 x	Propeller APC 10x4.7
1 x	Propeller APC 9x7.5 Electric
1 x	Propeller APC 8x8 Electric
1 x	Propeller FIALA 15x8 3-Blade
1 x	Servo MKS 6100 DS
2 x	Servo MKS HBL599 SL
1 x	Gear for D 54
1 x	Futaba S3010 Servo - Standard BB 0.16s/6.5kg
1 x	Blue aluminium servo arm V3-Hitec 1,0inch M3
1 x	Servo MKS HV 777A+
1 x	Servo FUTABA BLS173 SV
1 x	aluminium servo arm V2-JR 2,0 inch M3
1 x	Blue aluminium servo arm V1-Hitec 1,25" inch M3
1 x	Brazo servo aluminio 1.25/1.5" Futaba/MKS/Savox
1 x	Blue aluminium servo arm V2-Hitec 2,0 inch M3
1 x	Red aluminium servo arm V1-Futaba 23 mm M2
1 x	Field folding model stand SebArt
1 x	SERVO DES 707 BB MG, Pignons
1 x	SERVO DES 658 BB MG
1 x	Servo Dymond D 37 Eco
2 x	Servo MKS 6100 DS
2 x	Servo FUTABA HPS-A700 Digital S-Bus
1 x	Servo ROBBE FS-31 Pico Servo
1 x	Propeller electric carbon 7x7
1 x	Servo HITEC D85 MG
1 x	Blue Aluminium double servo arm V3-Hitec 3-3,5inch
1 x	Servo HITEC HS-5585MH
1 x	2,3 mm Prop Adapter M6
1 x	25 mm fenders (10 pcs)
1 x	300x4 mm M4 shaft ship
1 x	14 mm Portholes for screws (10 pcs)
1 x	15x7 tree blades propeller
1 x	28 mm turnbuckle
1 x	Pine wood slat 1.5x3.0x1000 mm
1 x	BALSA trip 2.0x2.0x1000 mm
1 x	BALSA trip 2.0x10.0x1000 mm
1 x	Walnut wood slat 1.5x1.5x1000 mm
1 x	Pine wood slat 2.0x10.0x1000 mm
1 x	MR30 connector female
1 x	Complet landing gear
1 x	Aro pasacable Ø20 mm (4 pcs)
1 x	Long adjustable control horn 3x34
1 x	BLUE Colored Liquid smoke for turbine 0.75 l
1 x	Ventus 1:4 set of instruments
1 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x	TWIST planeador gomas
1 x	PIT (Aero-Naut)
1 x	2 mm Prop Adapter M6
1 x	3 mm Prop Adapter M6
1 x	3,2 mm Prop Adapter M6
1 x	10 mm Prop Adapter M12
1 x	29,0 mm propeller (rigth propeller)
1 x	3.2 mm Prop Adapter M8
1 x	12 mm mast holder
1 x	250 mm / 16 mm Airbrakes
1 x	11x7 tree blades propeller
1 x	3,2 mm Prop Adapter M8
1 x	25,0 mm 3-BL M4 hydro-propeller (left hydropropeller)
1 x	12 mm portholes (10 pcs)
1 x	3.2 mm Prop Adapter M6
1 x	2.3 mm Adapter for 30 mm spinners
1 x	12x8 tree blades propeller
1 x	3,2 mm Prop Adapter M6
1 x	31,0 mm propeller (rigth propeller)
1 x	33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Mahogany wood slat 2.0x2.0x1000 mm
1 x	28x5 mm wires output (2 pcs)
1 x	Nylon hinge 15x0,3 (10 pcs)
1 x	Linden wood slat 3.0x3.0x1000 mm
1 x
1 x	Connectors banna oro 3,5 mm (M/F)
1 x	BALSA trip 4.0x4.0x1000 mm
1 x	38x4,5 mm wires output (2 pcs)
2 x	Horn 13,5x16 mm (2 pcs)
1 x	Mahogany wood slat 1.5x1.5x1000 mm
1 x	BALSA trip 5.0x5.0x1000 mm
1 x	BALSA trip 6.0x6.0x1000 mm
1 x	Socket Screw M3x9 mm
1 x	Tip wing protector 30x10 (2 pcs)
1 x	41x5,5 mm wires output (2 pcs)
1 x	Walnut wood slat 2.0x2.0x1000 mm
1 x	Pine wood slat 6.0x6.0x1000 mm
1 x	Support pump Xicoy X45
3 x	Threaded coupler ALU M3 Ø 5 (2 uds)
1 x	Support Antena 2.4 Ghz (2 pcs)
1 x	LH long aluminium horn L31xH30 (2pcs)
1 x	Support conector MPX (6 pcs)
1 x	LH long black aluminium horn L31xH30 (2pcs)
1 x	Propeller 11x4,7 SlowFlyer
1 x	Alignment dowels (2 parts, outer-Ø 8 mm) bag/ 100 pairs
1 x	Epoxy Resin L 285 + Hardener 386, kit/ 3.355 kg
1 x	Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 7 mm
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x	Support Pitot JETI
1 x	Propeller 8x4 Electric
1 x	5 mm M2 variable inclined horn
1 x	Thixotropic agent TM 100, tin/ 75 g (approx. 1 l)
1 x	6 mm red aluminium threaded horn with patella
1 x	Small adjustable control horn with bearing
1 x	GlassBubbles 2.5 g/cm³ Panda, tin (approx. 1 l)
1 x	Thixotropic agent tin/ 15 g (approx. 350ml)
1 x	Short extra-strong control horn with bearing 2,8x15
1 x	Horn 6/35 with M3 Bearing
1 x	Rudder forward 90x28 "type Kato"
1 x	Cotton Flocks, bag/ 7 Kg
1 x	Mould Resin P 10 kg
1 x	resin-hardener package L-385 with hardener H-385 (875 g)
1 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	Epoxy Resin L 285 + Hardener 386, kit/ 1.35 kg
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 5 m
2 x	Sistema LDS - Ø12 mmr servos Ø 6/25 spline 60º (Futaba) pitch 6
1 x	Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x	Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
1 x	Buy Perforated film 100 cm / 50 m
2 x	Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm
1 x	Buy Perforated film 100 cm / 20 m
2 x	Servo FUTABA BLS172 SV
1 x	21x14 Falcon electric carbon prop (64 g)
1 x	DUPLEX 2.4 EX MVario2
1 x	Propeller electric carbon 9.5x5
1 x	Propeller POWER-PROP 13x9 Izda
1 x	Blades 330mm
1 x	Round Rod 5,0x1000 mm
1 x	Propeller APC 10x5 Electric
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x	Rudder forward 80x28 "type Kato"
1 x	Brass control horn M2 long for wire (10pcs)
1 x	Futaba 3010 - Gear Set
1 x	SERVO S9177SV HV S-Bus2 Programable
1 x	DUPLEX 2.4EX MULi 6s M
1 x	DUPLEX 2.4EX MSpeed PITOT <300 Km/h
1 x	Battery RX JETI LiIon RB 2600 7.2v
1 x	Propeller POWER-PROP 14x10
1 x	Propeller POWER-PROP 14x8
1 x	Propeller electric carbon 8.5x7
1 x	Propeller electric carbon 8.5x6
1 x	Propeller POWER-PROP 10x6
1 x	Propeller POWER-PROP 12x6
1 x	Propeller POWER-PROP 9x5
1 x	Head spacer
1 x	Screws M1,6x6 Allen
1 x	Head runner
1 x	Cierva C30 Body Spain
1 x	Bearing 3x6x2,5
1 x	Cierva C30 spanish decoration Stickers
1 x	Blade holder lower
1 x	Nut M2
1 x	Balls 4 mm

7,259.61EUR