1 x | Ball link M1.6 (6 uds) |
1 x | Joint with bearing M2 22x5,5 |
1 x | Socket head ball link M3 (2 uds) |
1 x | 28x5 mm wires output (2 pcs) |
3 x | SOLOFOX 5m Voll-GfK |
1 x | 55% silver electrodes (2 pcs) |
1 x | Streamline Stainless Steel Tubing 11.5x6.5x1000 m |
1 x | SE Ring 300 mm (2 pcs) |
1 x | U Profile ABS 2,0x4,0x1000 mm |
2 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
1 x | 1/12 Pilot "Langley" |
5 x | Set of buckles and strap, 1:4 scale. |
1 x | Tape GFK 25 mm |
1 x | Hot Glue Stick BLACK |
1 x | Starter Sullivan-STAR 601 |
2 x | Silicone 0,14 qmm servos wire Graupner (5 m) |
1 x | Pilot "Adolf" Legends Series (Slimline) |
2 x | Red smoke canister 100 g |
2 x | Lunak ARF 2000 mm Yellow (Hacker Model) |
3 x | AX-60 starters (5 pcs) |
3 x | Swift 5050 mm (Airwold) |
1 x | SE Ring HACKER 300 mm (2 pcs) |
1 x | 1/7 Pilot "Japanese" |
3 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
3 x | DISCUS 2A De Luxe 3.750 mm (Topmodel) |
3 x | ABS tube 7.0x5.0x1000 mm |
1 x | Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm |
4 x | Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm) |
1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
1 x | Mahogany wood slat 3.0x3.0x1000 mm |
1 x | ABS tube 18.0x16.0x1000 mm |
4 x | VAGABOND 1500 mm ARF V2 (Red) |
2 x | Buy Perforated film 100 cm / 10 m |
1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
2 x | Silicone 0,50 qmm servos wire Graupner(100 m) |
1 x | Adjustable launching hook |
1 x | Me-163 |
2 x | Surprise XII Horizontal Estabilizer (Freudenthaler) |
1 x | Starter Sullivan-STAR 603 DINATRON |
2 x | L-Connector 4.0 mm x 1000 mm |
2 x | 45 mm rods + T patellas set for direction control |
2 x | ARAMID honeycomb 1300x2600x2 mm |
1 x | Gates hinge 30x16 mm (2 pcs) |
2 x | Carbon fiber flat 1000x6.0x0.8 mm |
2 x | Fox 4000 mm with flaps (Airwold) |
2 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
1 x | Silicone red 0,5 qmm wire ( 1 m) |
2 x | Extension silicon 30 cm female (Futaba) |
2 x | ABS 500 x 400 x 2,0 mm (white) |
1 x | Digital Air Speed Sensor And Pitot Tube Set |
3 x | ASK 21 6.5m + pylona |
3 x | Propeller balancer |
1 x | Connectors banna oro 0,8 mm (M/F) |
1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
1 x | LH long aluminium horn L31xH30 (2pcs) |
2 x | 2,5x60 mm allen screwdriver |
2 x | Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm) |
1 x | White silicone 0,25 qmm wire (100 m) |
3 x | Gracia Maxi ARF (Top Model) |
2 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
2 x | 1/12 Pilot "Cougar" |
1 x | 1/6 Pilot "Garry" |
1 x | Cable silicona macho batt. receptor 30 cm (Futaba) |
2 x | Circlik for shaft 1.9 mm (10 pcs) |
2 x | Copier 2x20 cm pcs |
1 x | Streamline Stainless Steel Tubing 19.5x9.8x1000 mm |
2 x | ABS 500 x 400 x 1,5 mm (white) |
1 x | Carbon fiber rod 20 mmx1000 mm |
3 x | Swift S1 De-luxe JEPPESEN 3.140 mm |
2 x | Cut tube |
1 x | SHK 4000 mm Scale 1:4.25 |
1 x | EC5-Set male, simple quality, 2 x female pin, 1 x blue housing |
2 x | BALSA trip 2.0x2.0x1000 mm |
5 x | Surface Indicator Gauge Small |
1 x | Silicone black 0,75 qmm wire ( 25 m) |
1 x | Windsock Ozone L - 700 mm |
1 x | 5 line servos wire black (1 m) |
2 x | quality beech plywood BIRCH 600x300x2.0 mm |
1 x | 140 mm rods set for direction control |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 5 m |
1 x | 20 mm carbon horn |
1 x | Profile ABS Square 3 x 1000 mm |
1 x | 120 mm leg for retract undercarriage with rotation sistem (1 pcs |
1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
1 x | Streamline Stainless Steel Tubing 17.8x12.4x1000 mm |
2 x | XT-90 connector (pair) |
3 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
2 x | Conector Servo female 4 pines |
1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
3 x | Allen wheel collar M3x5 |
1 x | Connectors DEANS 4 pins (1 pair) |
3 x | FOX ARF 2000 mm Red (Hacker Model) |
1 x | Connectors banna oro 3,5 mm (M/F) |
2 x | Windsock Ozone L -1200 mm |
1 x | BALSA trip 3.0x3.0x1000 mm |
2 x | Spikes Band (5 m) |
3 x | Black copper lacquer wire Ø0,2 mm (5 m) |
5 x | Aluminium alloy coupler for carbon tube 6/M4 |
4 x | Surprise XII Rudder (Freudenthaler) |
1 x | 1/12 Pilot "Fighter" |
1 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
3 x | ASW 15 5000 mm (Airwold) |
1 x | 20x1000 mm Ring Strap Back To Back |
2 x | Spring lock washer 2.1 mm (20 pcs) |
2 x | Fiberglass landing gear for 140-160 |
1 x | Extension silicon 10 cm (Graupner) |
1 x | Aluminium cap bolt washer M4 blue (8 pcs) |
2 x | X-RAY Micro QR (Rudder) |
1 x | Militarian pilot "Kamikaze" size 9cm (Slimline) |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
5 x | X-RAY Micro QR (Elevator) |
2 x | 6 mm blue aluminium threaded horn with patella |
4 x | Ferrita 14x8x5.5 mm |
1 x | 250 mm / 16 mm Airbrakes |
1 x | Connector CAN 15 |
2 x | Connectors banna gold 5,5 mm (M/F) |
3 x | Ferrita 17x10x6.5 mm |
1 x | Carbon fiber rod 5.0 mmx1000 mm |
1 x | Connectors banna oro 6,0 mm (M/F) |
4 x | Angle of incidence meter |
2 x | Xplorer3 anemometro |
1 x | SU 29S 140 carbon landing gear |
1 x | Canopy Lock V1 M3 Blue (2 pcs) |
1 x | Quicklock washer 3 mm (10 pcs) |
1 x | Silicone 0,35 qmm servos wire Futaba (100 m) |
1 x | Cable tie mounts 4.3 (4 uds) |
1 x | ABS "T" angle 4.0x4.0x1000 mm |
2 x | Horn 5/15 with M2 Bearing |
1 x | EC5-Set female, simple quality, 2 x female pin, 1 x blue housing |
1 x | Cable grommet 9.5 mm (4 uds) |
1 x | CC 02 |
1 x | Profile ABS half cane 2.0x1000 mm |
1 x | 160 mm carbon undercarriage (2pcs) |
2 x | Aluminium cap bolt washer M3 black (8 pcs) |
1 x | Long pinned hinge (12 uds) |
1 x | Ferrita con funda |
1 x | Spring lock washer 2.6 mm (20 pcs) |
1 x | 1/10 Pilot "Jack" |
2 x | Breatex™ Non-woven absorber 150 g/m² Roll 100m |
2 x | Aluminium wide washer M4 Red (4 pcs) |
1 x | 45 mm rods set for direction control |
2 x | Swift S1 De-luxe 3.730 mm |
1 x | Pilot JAN 1/4 Saiplanes |
1 x | Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm) |
2 x | Gates hinge |
2 x | Cabel "Y" 30 cm (graupner) |
2 x | Glider KNIRPS |
1 x | 2 mm female connector (2 pcs) with safety connector |
1 x | Spring lock washer 4.1 mm (20 pcs) |
2 x | Black smoke bombs AX-60 (5 pcs) |
1 x | "S" set for planes |
2 x | Aluminium cap bolt washer M3 blue (8 pcs) |
1 x | Starter 12v (Max 90 and 15ccm) |
2 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
2 x | ABS tube 12.0x10.0x1000 mm |
1 x | LUNAK 4,00 m |
1 x | Clip fixing for wing (2 pcs) |
1 x | ABS angle 2,0x2,0x1000 mm |
2 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
1 x | Civilian pilot "Curt" size 9cm (Slimline) |
4 x | Fournier RF-4D |
1 x | Legs + electric brakes for Viper Jet 90 |
1 x | SE Ring 450 mm (2 pcs) |
3 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
1 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
1 x | Streamline Stainless Steel Tubing 9.0x5.0x1000 mm |
3 x | DG-303 ACRO 3750 mm (Airworld) |
1 x | Disposable Injector Bags (30x16cm) 100 pcs |
2 x | White silicone 0,25 mm² wire (25 m) |
2 x | UMX™ Whipit™ DLG BNF Basic (E-flite) |
3 x | Towing hook |
1 x | FA27.2×8.9 Prop-2PCS/PAIR |
2 x | ABS tube 7.0x6.0x1000 mm |
2 x | Aluminium wide washer M3 red (4 pcs) |
2 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
1 x | Clip mini fixing for wing (2 pcs) |
1 x | 1/4 Pilot "Mike" |
1 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
2 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Cable with accesories |
1 x | Tube Pitot to PIXHAWK |
1 x | Carbon fiber rod 3.0 mm x 1000 mm |
2 x | Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm) |
1 x | Flap hinge (6 pcs) |
1 x | GRAFAS MAXI ARF |
1 x | Carbon fiber rod 12 mm x 1000 mm |
2 x | Extension silicon 100 cm (Graupner) |
2 x | Micro flex hinge (12 uds) |
3 x | Small flex hinge (12 uds) |
3 x | Red smoke canister 65 g |
2 x | ABS "T" angle 8.0x8.0x1000 mm |
1 x | Fox MDM 1 4000 mm DeLuxe,cabina |
4 x | Swift ARF 2000 mm Red (Hacker Model) |
1 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
2 x | Ball Link Plier |
1 x | Banna gold connector 2,5 mm (100 M/F pairs) |
3 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
2 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
2 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
1 x | Connectors banana oro 6,0 mm Ultralight (M/F) |
1 x | Nose leg 155 mm with wheels 70 mm |
1 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
2 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
2 x | Carbon fiber rod 14 mmx1000 mm |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
2 x | Glider STROLCH |
2 x | Small pinned hinge (6 uds) |
1 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
1 x | Wing connector 8pin with pin strip, plug & socket |
3 x | Kobuz 5000 mm (Airwold) |
2 x | U Profile ABS 3,0x6,0x1000 mm |
1 x | Tape GFK 38 mm |
1 x | 140 mm rods + T patellas set for direction control |
1 x | Connectors DEANS (T) |
1 x | XT-60 connector (male) |
1 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
3 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
1 x | Cabling for Fox MDM1 wings |
1 x | ABS tube 4.0x2.0x1000 mm |
2 x | SHK 4000 mm Scale 1:4.25, V-Tails |
1 x | Tube bender |
1 x | Pine wood slat 2.0x2.0x1000 mm |
1 x | 1/10 Pilot "Jimmy" |
2 x | Truck-trailer for gliders 720 x 239 mm |
1 x | TS832 to Gopro AV/Power Cable DJI Phantom 2 Compatible |
1 x | Green smoke canister 100 g |
1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
1 x | PVC 0,08 qmm Graupner servos wire (5 m) |
1 x | Aluminium sheet 500x250x0,5mm |
2 x | Buy Perforated film 100 cm / 20 m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
1 x | Extension silicon 30 cm male (Graupner) |
2 x | Silicone 0,50 qmm servos wire Graupner(5 m) |
2 x | Buy Perforated film 100 cm / 50 m |
1 x | Carbon fibre sandwich sheet 350x150x3 mm |
1 x | Civilian pilot "Gramps" size 9cm (Slimline) |
1 x | Double conector with JR adapter and 200 mm extension |
1 x | ABS tube 3.0x1.0x1000 mm |
1 x | BABY glider drawings (Aero-naut) |
2 x | Bearing block for noseleg landing gear |
1 x | ABS tube 8.0x6.0x1000 mm |
4 x | Mini VISION "spread tow" CFK |
2 x | Medidor ángulos y/o incidencias |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
2 x | Cable grommet Ø 3.2 mm (4 uds) |
1 x | BALSA triangular 15x15x1000 mm |
3 x | Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m |
4 x | F450/550 Quadcopter, landing gear |
3 x | Quicklock washer 1 mm (10 pcs) |
1 x | Smoke set "Glider" |
1 x | Aluminium cap bolt washer M4 green (8 pcs) |
1 x | ABS tube 3.0x2.0x1000 mm |
1 x | Connectors banna oro 8,0 mm 5 pcs(Female) |
1 x | Epoxy 40 min (Hardener). 1 Kg |
2 x | JETImodel SINGLE BEC |
2 x | Actuator Electric 25 mm |
1 x | Ventus 2cx 4.5 m Sapare Fuselaje |
3 x | Hot Glue Stick GREEN |
5 x | Q-12 2000 mm Electric |
1 x | Thixotropic agent TM 100, tin/ 75 g (approx. 1 l) |
2 x | Ply-Span 450x600/13g Black |
2 x | PSC 6 |
1 x | Extension silicon 30 cm male (Futaba) |
1 x | Servo HITEC HS-55 |
2 x | PowerBox iGyro 1e |
1 x | SERVO DES 806 Pignons |
1 x | XH male balance (7S) connector (2 pcs) |
1 x | Hard brass tubing (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
1 x | XH male balance (9S) connector (2 pcs) |
4 x | PowerBox iGyro 3xtra |
1 x | Aluminium cap bolt washer M3 green (8 pcs) |
1 x | Xplorer1 anemometro |
1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
1 x | XH female balance (6S) connector (2 pcs) |
2 x | Fiberglass plate 350x150x1.5 mm |
1 x | 22 mm Cut Disc Proxxon/Dremmel |
5 x | CC 01 |
2 x | ABS tube 8.0x7.0x1000 mm |
3 x | HITEC 20 mm servo arm with ball link |
1 x | Starter EM Gear Power 250 |
3 x | XT-60 connector (female) |
1 x | PowerBox Competition |
2 x | 2,3 mm Prop Drive Günther M4 |
4 x | LO 100 ARC 3.3m |
1 x | Red aluminium servo arm V2-Futaba 1,0" inch M3 |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
2 x | Swift S1 De-luxe 3.140 mm |
1 x | Blue aluminium servo arm V3-Hitec 1,25inch M3 |
1 x | Glass fabric 163 g/m² 130cmx10m (Interglas 92105, aero, finish |
1 x | Horn with ball 40x30 |
1 x | Horn for flap control (1 pcs) |
2 x | Oracover Red 2 m |
2 x | METEOR 1.000 mm kit |
1 x | Fox MDM 1 6000 mm |
2 x | Threaded coupler M2,5 Ø 3 mm (10 pcs) |
1 x | Hexagonal Nut M1,6 (10 pcs) |
2 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
1 x | ABS "T" angle 6.0x6.0x1000 mm |
1 x | Large flex hinge (12 uds) |
2 x | LH long black aluminium horn L31xH30 (2pcs) |
2 x | Extension silicon 75 cm (Graupner) |
3 x | PVC 0,14 qmm servos wire Hitec/Mpx (5 m) |
2 x | Aluminium wide washer M4 Gold (4 pcs) |
1 x | Screw M3x20 (10 pcs) |
1 x | 1/12 Pilot "Tom" |
2 x | Oracover Green10 m |
2 x | Decorative caps, multicoloured, short |
1 x | Hexagonal Nut M2.5 (10 pcs) |
2 x | DG-303 ACRO 3750 mm, winglets |
1 x | Fixed launching hook |
1 x | Servo HITEC HS-225 MG |
1 x | Medium pin type hinge (12 uds) |
1 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
1 x | Charger HITEC CG-42 TX 7.2v/ RX 4.8v (80 mA) |
1 x | Silicone 0,35 qmm servos cable Futaba (5 m) |
1 x | Small Crow DLE-170M |
1 x | Blind nut M6 (4 pcs) |
2 x | 2 mm male connector (2 pcs) with safety connector |
2 x | Futaba 54 mm servo arm with ball link |
2 x | Oracover Black 2 m |
1 x | ORACOVER Ferrari red (2 m) |
3 x | E-FUN BUG (ROI-Import) |
2 x | Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm) |
1 x | Long pinned hinge (6 uds) |
1 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
1 x | White aluminium 230 mm landing gear |
2 x | Buy Perforated film 145 cm / 50 m |
2 x | Cabel charger transmitter GRAUPNER |
2 x | CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm) |
2 x | Gates hinge aluminium (1 pcs) |
1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
1 x | Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm) |
1 x | Protector Connector MPX (1 pair) |
3 x | T-Motor MN705-S Kv125 (pack 2 uds) |
5 x | Spare Part Frame Set for EACHINE RACER 250 |
1 x | 100 mm rods set for direction control |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
1 x | XH female balance (5S) connector (2 pcs) |
1 x | Gold antispark 4 mm plug |
2 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
1 x | Pushrod octagone 3/2 with coupler M2 |
1 x | Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
1 x | ORACOVER transparent Yellow (10 m) |
1 x | 1/6 Pilot "Buddy" |
2 x | Futaba Female 40 cm extension |
5 x | Aero-Master Fuselage (Aero-naut) |
2 x | Quicklock washer 4 mm (10 pcs) |
2 x | Aluminun wheel collar 5 mm Ø (4 uds) |
3 x | Albatros ,spare cockpit (Top Model) |
1 x | Screw M3x5 (10 pcs) |
2 x | ABS tube 10.0x8.0x1000 mm |
1 x | Red aluminium servo arm V1-Futaba 20 mm M2 |
2 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
1 x | Epoxy L 40 min. 10 kg (Resin) |
3 x | USB HLS prog. interface |
2 x | Monokote ROJO misil (1.8x0.65m) |
3 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
1 x | Digital scale up to 40 kg |
1 x | MPX Support |
1 x | Hitec 20 mm servo arm |
1 x | Red 4 mm connector holder |
2 x | Extension silicon 30 cm female (Graupner) |
3 x | Flat washer 4.3 mm (20 pcs) |
1 x | Threaded coupler Micro M2 Ø 0,8 (10 pcs) |
2 x | Carbon Non-Woven, 240 g/m² 100 cm x 2m |
1 x | Red 3m5 mm connector holder |
1 x | Walnut wood slat 3.0x3.0x1000 mm |
2 x | White smoke canister 100 g |
3 x | Fully Threaded Steel Rod Duralumin 34 mm M3 (2 pcs) |
2 x | Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm) |
1 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
6 x | 4 blades set |
1 x | Walnut wood slat 2.0x2.0x1000 mm |
2 x | Landing gear strap small (4 uds) |
1 x | Quicklock washer 2 mm (10 pcs) |
2 x | Servo HITEC HS-125 MG |
2 x | Quicklock washer 1.5 mm (10 pcs) |
1 x | Silicone red 0,75 qmm wire ( 1 m) |
2 x | Threaded insert M6 (10 pcs) |
1 x | Oracover CARBON Metalic 1 m |
3 x | Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm) |
1 x | Transmitter Balancer Futaba FF9-DX7-JR-Hitec |
3 x | Extension silicon 75 cm (Futaba) |
2 x | BEC 3A FOXY |
1 x | Nut for mounting M3 (4 pcs) |
1 x | Cinta Goldfix 1m |
1 x | Carbon plate 350x150x1.5 mm |
1 x | Red aluminium servo arm V1-Futaba 23 mm M2 |
1 x | External LED's (2 pcs) |
8 x | Batetia LiFe 3200 mAh 6.6v MPX PowerBox |
5 x | PowerBox Spare part magnetic sensor |
6 x | Tailwheel for 1-3 kg models |
6 x | PowerBox Teleconverter S-BUS 2 |
4 x | BlueCom™ Adapter (Android / WP) |
5 x | PowerBox MAG Sensor |
3 x | Gracia Maxi ARF, bags (Top Model) |
5 x | POWERBOX Magic Jeti Switch |
1 x | Tail wheel for 8-12 kg models |
2 x | Fuselage Autogyro RAINBOW |
5 x | Power Box GPS Sensor III |
7 x | PowerBox Cockpit SRS (incl. SensorSwitch) |
1 x | PowerBox Evo |
5 x | OLED-Display for PowerBox Mercury SRS |
6 x | PowerBox ROYAL SRS |
4 x | Micro Tarjeta SD Rapid Rush 16 GB |
3 x | PowerBox Voltage Regulator (linear) |
6 x | Tail tube RAINBOW |
5 x | Blade Holder Full (3 blades) |
1 x | PowerBox iGyro SRS + GPS Modul |
7 x | Blade Holder (3 blades) |
5 x | Cable video GoPro |
6 x | PowerBox PowerExpander SRS |
6 x | Big-Malibu XL Roof box with surfboard rack GREY |
2 x | Tailwheel for 40/90 size |
2 x | Charging Extension 50cm for 2 Battery |
1 x | SPARK Switch 5.9v |
3 x | Tail wheel for 5-8 kg models |
2 x | Tailwheel for 60/120 size |
3 x | SATORI 2 PRO V C64 F5J |
1 x | APM2.6 Power module with 5.3V DC BEC |
6 x | PowerBox Battery 4000 |
4 x | Cable video GoPro and 5V cable |
5 x | Astra (Top Model) |
4 x | 28 mm tailwheel unit |
4 x | Tail gear set (60-120 class) |
1 x | Grafas ARF 3.0 m (Top Model) |
1 x | Tailwheel for F3A size |
1 x | Safetyclip MPX (6 pcs) |
7 x | PowerBox 12 |
1 x | Blade Holder Full (4 blades) |
3 x | PowerBox iGyro SRS |
1 x | Extension for SensorSwitch 60cm |
4 x | Extension for LC-Display 50cm |
5 x | PowerBox PROFESSIONAL |
3 x | PowerBox MagSensor red connector |
2 x | PowerBox Signal Amplifier |
2 x | 3 blades set |
5 x | Tailwheel for 20/60 size |
1 x | FEMA DEFLECTOR LEVER FOR WHEEL BRAKE, |
1 x | Connectors DEANS (T) micro |
6 x | Quadcopter Q50 Kit Carbon Fiber |
1 x | Big Crow DLE-170M |
2 x | Blue smoke canister 140 g |
1 x | Profile ABS Square 1 x 1000 mm |
1 x | 33,0 mm propeller (rigth propeller) |
1 x | PIN Connector female (100 pcs) |
1 x | Horn 13,5x16 mm (2 pcs) |
2 x | Cabel PVC 2 x 0.25 mm2 (5 m) red-black |
1 x | Squared carbon wing joinner 5x5x220 mm |
1 x | Servo HITEC HS-5475 HB Digi |
1 x | Ply-Span 450x600/13g Red |
2 x | Angle measurer |
1 x | Double aluminium servo arm V1-Hitec 2,5 inch M3 (blue) |
2 x | Blind nut M2 (10 pcs) |
1 x | Lock washer 4.3 mm (20 pcs) |
1 x | Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs) |
4 x | LS-8 GFK 6m Glider |
1 x | Set cintas unión paracaídas 145 cm |
4 x | BlueCom™ Adapter (iOS) |
3 x | TX 250 mW especial GOPRO |
5 x | PowerBox Champion SRS |
4 x | Gracia (Top Model) |
2 x | Oracover Yellow CADMIO 2 m |
1 x | Kwik link unmount tool |
3 x | Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CCW th |
2 x | Futaba 2x20 mm servo double arm |
2 x | Gold antispark 5,5 mm plug |
1 x | Parachute expulsion foam |
1 x | Servo HITEC D625 MW |
3 x | Oratex White 2m |
1 x | Propeller set 400 (2R+2L) |
1 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
3 x | Carbon Non-Woven, 240 g/m² 100 cm x 20 m |
1 x | Brass control horn M2 short for wire (2 pcs) |
3 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
1 x | Blue aluminium servo arm V2-Hitec 1,25 inch M3 |
1 x | SlowFlyer control horn (3 pcs) |
2 x | Red copper lacquer wire Ø0,2 mm (5 m) |
1 x | 41x5,5 mm wires output (2 pcs) |
1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
2 x | Thixotropic agent TM 100, tin/ 415 g (approx. 5 l) |
1 x | Lock washer 2.7 mm (20 pcs) |
2 x | "S" set for boats |
1 x | Adapter 2,3 mm M5 for spinner 30 mm fixed propeller |
3 x | White smoke bombs AX-9 (10 pcs) |
2 x | Fully Threaded Steel Rod Duralumin 80 mm M3 (2 pcs) |
2 x | Nut for mounting M2,5 (4 pcs) |
1 x | Receiver bed (Blue) |
2 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
2 x | Oracover Yellow CADMIO 10 m |
2 x | DC-3 Douglas (DAKOTA) 1800 mm Electric LG |
1 x | ABS tube 9.0x8.0x1000 mm |
1 x | Marker ties (20 pcs) |
2 x | Adapter 5,0 mm M8 |
1 x | Screw M2.5x10 (10 pcs) |
1 x | 3,0x60 mm allen screwdriver |
1 x | Ferrita 27x14x7 mm |
2 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
2 x | Carbon fibre sleeve 12k 170 mm x 5m |
1 x | Quicklock washer 2.5 mm (10 pcs) |
2 x | Horizontal mounting servo holder |
2 x | 0,14 mm PVC servo wire extension, ZH micro conector. |
2 x | Pilatus PC-21 50E, GLOW set conversion (SebArt) |
2 x | Motor DLE 200cc Std |
1 x | Blue aluminium servo arm V1-Hitec 1,25" inch M3 |
3 x | Red smoke canister 140 g |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm) |
1 x | Civilian pilot "Pamela" size 9cm (Slimline) |
1 x | Glass fabric 25 g/m² (1 m²) |
1 x | Flat washer 3.2 mm (20 pcs) |
1 x | Hexagonal Nut M2 (10 pcs) |
1 x | Suction funnel for carburetor 90D-M (red) |
2 x | Motor DLE 430 cc - Paramotors |
2 x | Motor mount class 48" |
1 x | Spring pin Ø 2 x 6 mm (10 pcs) |
1 x | Medium extra-strong control horn with bearing 2,8x24 |
1 x | Extension silicon 35 cm male (Futaba) |
3 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
1 x | 3 mm Short Prop Adapter M5 |
1 x | Hard brass tubing (L 1000 mm, Ø13.0 mm, Ø12.0 mm) |
1 x | Mini Lock Grips 2PCS |
3 x | Fascination 3600 mm, Spare Elevator (Top Model) |
5 x | ESC ALPHA 60A HV |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Extension silicon 10 cm (Futaba) |
1 x | T-Motor U7-V2.0 Kv420 |
1 x | Quick hose connector 6-6 mm |
4 x | Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | Prolongador S-Bus JR/JR 20cm |
1 x | Fiberglass plate 350x150x1.0 mm |
1 x | Carbon fiber rod 10 mm x 1000 mm |
1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
2 x | Motor brushless 1806 - 2300 Kv Cuadracopter |
1 x | M2-250 mm Carbon Fiber Adjustable Push Rod Sets (2 pcs) |
1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
5 x | Indoor landing gear set |
1 x | Triple rod con. 2mm Pushrod (2 pcs) |
2 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 5 cell |
1 x | Carbon tube 3K (L 1000 mm, Ø 8 mm, Ø 7 mm) |
1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm) |
1 x | Fresa corte diamante Ø 1.0mm (bola) |
1 x | Hitec 38 mm servo arm with ball link |
3 x | Spinner propeller pleg. 40 mm / 5,0 mm |
1 x | Electric spoiler 440 mm (2 pcs) |
1 x | TP/TopFuel - XH 2/3S Adapter |
1 x | BIG MOSNTER |
1 x | Red silicone 1,0 qmm wire (50 m) |
1 x | Long adjustable control horn with bearing |
1 x | 1804 2400KV Brushless Motor Qav 250 mini |
1 x | Connectors MPX black male |
1 x | Silicon black 2,5 qmm cable ( 25 m) |
1 x | XH female balance (8S) connector (2 pcs) |
1 x | Screw M4x20 (10 pcs) |
1 x | Thinwall Stainless Steel Tubing 28x0.6x1000 mm |
2 x | XT-30 connector (pair) |
1 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
2 x | Oracover Orange 2 m |
3 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
3 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
1 x | Savox HV Brushless Servo SB-2270SG (Swashplate) |
2 x | Spinner propeller pleg. 42 mm/6,0 mm/0º |
1 x | Screw M2x8 (10 pcs) |
2 x | 12 mm dogdrive props |
1 x | Propeller balancer |
1 x | Glass Bubbles (0,12 g) 350 ml |
1 x | Servo arm with 6 mm hole to FEMA 9800A |
1 x | Ball Link Plier |
3 x | Steering arm 12 mm Ø 4 mm |
2 x | SIG Coverall 1.2x1.8 m |
3 x | Pin hinge 26x11 mm (10 uds) |
1 x | Servo HITEC HS-5585MH |
1 x | Tip wing protector 40x14 (2 pcs) |
1 x | PowerBUS Lead 60 cm |
1 x | Field folding model stand SebArt |
1 x | Servo HS-5765MH High Voltage |
1 x | Ion Pro NG electric with flaps GREEN Fluor (JP Model) |
1 x | XH male balance (2S) connector (2 pcs) |
2 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
1 x | Streamline Stainless Steel Tubing 6.3x3.5x1000 mm |
1 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
2 x | SUS wire 3m (nylon coated) |
1 x | Gasket for motor DA 50-R |
3 x | Carbon Non-crimp ST 200 g/m² 50 cm x 10 m |
2 x | Oratex Natural White 2m |
2 x | Blue silicone 0,5 qmm wire (50 m) |
1 x | Pan Head Screw M2x6 PH |
2 x | U Profile ABS 8,0x4,0x1000 mm |
1 x | MPX screwable clips (4 pcs) |
1 x | Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs) |
2 x | Futaba 24/30 mm servo pull-pull double arm with ball link |
2 x | Steering arm 16 mm Ø 3 mm |
1 x | 4 mm Prop Adapter M6 |
1 x | Pilatus PC-21 50E, wings carrying bags (SebArt) |
1 x | Glass fabric 49 g/m² (1,27 x 20 m) |
1 x | ABS tube 5.0x4.0x156 mm |
2 x | Fox 4000 mm (Airwold) |
1 x | 50 mm servo arm with bearing (2 pcs) |
1 x | Check valve quick hose connector 4-4 mm |
1 x | Circlik for shaft 1.5 mm (10 pcs) |
1 x | Propeller mounting nuts Black / Silver Rocket 400 or Phatom simi |
2 x | SAGITA Alsema 4.0 m |
1 x | Spinner propeller pleg. 40 mm / 3,0 mm |
3 x | XH male balance (3S) connector (2 pcs) |
1 x | 12,7x1000 mm 2:1 green termoretract tube |
2 x | Adapter 4,0 mm M6 |
2 x | Carbon Non-crimp ST 200 g/m² 50 cm x 20 m |
1 x | 25 mm Sandpaper file |
2 x | Universal Filter |
2 x | Autogyro Cierva C30 Spain |
1 x | 58 mm PVC transparent battery termo-retract 68 mm (1 m) |
2 x | PowerBUS to BUS |
2 x | Vasa model Catapult |
1 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
1 x | Protective Cover for wires Ø 10 mm 1000 mm |
1 x | Epoxy Resin HT 2 + Hardener HT 2 (60 min) 1 kg |
1 x | Nylon threaded block M4 (2 uds) |
1 x | DPSI LR-S (with push buttons) |
2 x | XH female balance (2S) connector (2 pcs) |
1 x | Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm) |
2 x | Silicone black 6,0 qmm wire ( 1 m) |
1 x | L-Connector 1.5 mm x 1000 mm |
2 x | Fully Threaded Steel Rod M2,5 (2 uds) |
1 x | Futaba 50/60 mm servo pull-pull double arm with ball link |
1 x | Hard brass tubing (L 1000 mm, Ø18.0 mm, Ø16.0 mm) |
3 x | Charger FUTABA SQN30W12P-08 220v |
1 x | Spare round blades, 28 mm, pack/ 2 pcs. |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø22.5 mm) |
1 x | Spinner propeller pleg. 38 mm/6,0 mm/5º |
1 x | Engine mounts for .09 - .19 engine |
2 x | ASK 21 6.8m |
1 x | M3 black washers (4 pcs) |
1 x | Horn 6/27 with M3 Bearing |
1 x | Vertical mounting servo holder |
1 x | BULLIT Wing 840 mm |
2 x | Nut for mounting M6 (4 pcs) |
2 x | Optotronix X-Carrier |
1 x | USB Interface Adapter |
1 x | Lock washer 2.2 mm (20 pcs) |
2 x | Initior Receiver FRX2 Wireless |
2 x | Silicone red 4,0 qmm wire (25 m) |
1 x | Gold aluminium double servo arm V3-JR 3.5 inch M3 |
2 x | Spinner propeller pleg. 30 mm / 2,3 mm |
1 x | Snap pin for micro clevis (10 uds) |
1 x | Fiberglass plate 350x150x0.5 mm |
2 x | Avia spare fouselage CF reinforced (Top Model) |
1 x | Piloto Jet "Red" 1/6 Scale |
1 x | Extension S-Bus 1-2 silicon 120 cm FUTABA |
3 x | Black silicone 0,25 mm² wire (25 m) |
1 x | Servo HITEC HS-5645 MG Digi |
1 x | Hitec 52 mm servo arm |
1 x | 290 mm M4 7/8x212 mm shaft ship |
1 x | Lock nut M2.5 (10 pcs) |
2 x | Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm) |
2 x | X-RAY Micro QR |
2 x | Elevator VENTUS 2cx 4.5m |
1 x | Landing gear axle Ø 5 mm (2 uds) |
1 x | Aluminium wide washer M3 gold (4 pcs) |
1 x | Locking cable tie 2.5x100 (uds) |
1 x | Tow hook for tug |
1 x | White smoke canister 140 g |
1 x | Prolongador S-Bus JR/JR 10cm |
1 x | Thixotropic agent tin/ 15 g (approx. 350ml) |
1 x | 50 mm aluminium spinner (Kavan) |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm |
1 x | Parachutist |
1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
1 x | 1,5x50 mm allen screwdriver |
4 x | Ka-8b ELECTRIC 6000 mm ARF 1:2.5 (Phoenix Models) |
1 x | Y-Hose connector 4-4-4mm |
2 x | Epoxy Resin L 285 + Hardener 386, kit/ 1.35 kg |
1 x | Emcotec SPS Magnetic Switch Actuator |
2 x | Tapping Screw M2.9x9.5 (10 pcs) |
1 x | Double aluminium servo arm V1-Futaba 2,5 inch M3 (red) |
1 x | Aluminum Bayonet / strongal D25 mm / 1 m |
1 x | Fully Threaded Steel Rod Duralumin 110 mm M3 (2 pcs) |
1 x | KATANA DV 20 1470 mm |
1 x | Y-Hose connector 6-6-6 mm |
1 x | Epoxy 40 min (Resin). 25Kg |
1 x | Spinner Alumin. fixed propeller 40 mm / 4,0 mm |
1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
1 x | Black silicone 1,0 qmm wire (50 m) |
1 x | "M" set |
1 x | Rudder forward 70x28 "type Kato" |
1 x | Red aluminium servo arm V1-Futaba 1,5" inch M3 |
1 x | servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT |
1 x | 10 mm dogdrive props |
1 x | Servo Controller Fibra optica |
2 x | THERMIK XL 4000 mm |
1 x | Fiberglass plate 620x540x2,0 mm |
1 x | P 17×5.8 Prop-2PCS/PAIR |
1 x | Wheel collar 4 mm Ø (4 uds) |
1 x | 15 mm reinforced hinge |
1 x | Red aluminium servo arm V3-Futaba 3-3,5inch |
1 x | SF260 SIAI MARCHETTI 50E yellow/black (SebArt) |
1 x | Servo HITEC HS-311 |
2 x | Silent-blocks DLE 170M |
3 x | Carbon tube 3K-PW (L 2000 mm, Ø25 mm, Ø22.5 mm) |
2 x | SensorSwitch, red connector wit 200cm ribbon cable |
2 x | Glider IKARUS |
1 x | Red aluminium servo arm V2-Futaba 1,25" inch M3 |
1 x | Nut for mounting M2 (4 pcs) |
3 x | Servo HS-5565MH High Voltage |
2 x | Silicone 0,50 qmm servos wire Futaba (100 m) |
1 x | 3 mm Long Prop Adapter M5 |
1 x | DPSI RV Mini 6 (2008) |
4 x | Antenna FUTABA 2.4GHz 3PM/8FG/14SG/18SZ/18M |
1 x | Servo HITEC HS-5084 MG |
1 x | Transmitter Stick Ends V1 Red - M3 (2 pcs) |
1 x | USB interface ALTIS |
1 x | 2 mm Prop Adapter M5 |
1 x | Servo HITEC D645 MW |
1 x | XPower XC5030/14 LS |
1 x | 68 mm PVC transparent battery termo-retract 68 mm (1 m) |
2 x | Servo HITEC HS-7115 TH |
1 x | Female connector JST SH 1.0mm with 10 cm wire |
1 x | Fresa corte diamante Ø 1.4mm (bola) |
1 x | PPS-4D Propeller |
3 x | Motor 2212 (1000KV) Quadcopter F450 |
1 x | Male connector for 10 pines AWG |
3 x | Battery FUTABA 18MZ |
1 x | Servo arm with 5 mm hole to FEMA 9810A |
1 x | SE Ring 200 mm (2 pcs) |
1 x | Electric spoiler 300 mm (2 pcs) |
1 x | Propeller hub spacer 8/5.5 |
1 x | 105 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) knurled |
1 x | DPSI Micro-DualBat 5.9V / 7.2V MPX-JR |
1 x | Rotorshape Autogyro |
1 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
1 x | T-Hose connector 2-2-2 mm |
1 x | Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm) |
1 x | Servo lock HS-80/81/82/85 (2 pcs) |
1 x | 1,6x1000 mm 2:1 red termoretract tube |
1 x | Mould Resin P + Hardener EPH 161-P, kit/ 585 g |
1 x | Window mounting channel 5m |
1 x | Blind nut M3 (4 pcs) |
1 x | Switch Cap L (Blue) |
2 x | Pan Head Screw M2x8 PH |
2 x | Flat washer 2.7 mm (20 uds)pcs) |
2 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
2 x | Copper lacquer wire Ø0,2 mm (5 m) |
1 x | Connectors banna oro 3 mm (M/F) |
2 x | PowerBUS Lead 30 cm |
1 x | Servo HITEC HSB-9380TH |
1 x | Fully Threaded Steel Rod Duralumin 130 mm M3 (2 pcs) |
2 x | Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs) |
1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
1 x | Carbon/kevlar tube 3K-PW (L 1500 mm, Ø25 mm, Ø22.5 mm) |
2 x | Silicone red 4,0 qmm wire ( 1 m) |
1 x | Set propellers 5x3 Multicopter (2cw+2ccw) |
2 x | Silicone red 6,0 qmm wire ( 1 m) |
1 x | Field folding model stand |
1 x | Gates hinge black 30x16 mm (2 pcs) |
1 x | Connectors banna oro 8,0 mm (M/F) |
1 x | ASW 20 5000 mm with winglets (Airwold) |
1 x | Cyano SUPER - GOLD™ (12g) |
1 x | Gear set HITEC HS-645MG/5645MG/5685MH |
1 x | Glass fabric 49 g/m² (1,27 x 10 m) |
1 x | Conector BEC male (10 pcs) |
2 x | Fresa corte diamante Ø 2.35mm (flame) |
2 x | Gobe R-26S (Airwold) |
1 x | Transmitter Balancer HITEC Aurora 9, JR and Spectrum (blue) |
1 x | Carbon plate 350x150x2.0 mm |
1 x | Hard brass tubing (L 1000 mm, Ø11.0 mm, Ø10.0 mm) |
2 x | Festo 4mm Tubing Holder (10 uds) |
1 x | Floating M3 washer pad (36 pcs) |
1 x | Servo HITEC HS-77 BB Low Profile |
1 x | Gold aluminium servo arm V2-JR 1,25" inch M3 |
2 x | DC-3 Douglas (White/Blue) 1800 mm |
6 x | Q-12 X-light 2000 mm Electric |
1 x | F3A carbon 82 mm spinner for 12 mm axis |
1 x | Silicone black 4,0 qmm wire ( 1 m) |
1 x | Ply-Span 450x600/13g White |
1 x | Towing hook <3m |
1 x | Servo HITEC HS-85 MG |
1 x | Transmitter Balancer SPK DX-8 |
1 x | Screw M4x30 (10 pcs) |
1 x | Silicone red 2,5 qmm wire ( 25 m) |
1 x | Carbon plate 350x150x4.0 mm |
2 x | XH female balance (3S) connector (2 pcs) |
1 x | Servoarm Aluminium SH-82 |
2 x | ORACOVER Fluor red (2 m) |
1 x | Propeller CFK 17x18 |
1 x | Futaba F14 Twin Boat Stick |
1 x | Catalyst INSTA - SET™ (60g) |
3 x | VITAPROP CARBON FOLDING PROP 15x9.5" |
2 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
1 x | Silicone red 2,5 qmm wire ( 1 m) |
3 x | silicon 100 cm Futaba Extension Ø 0,35 mm |
1 x | Small aluminium horn blue (2pcs) |
1 x | Z Bender - S Type Tool |
2 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 6 mm |
1 x | Brass control horn M4 short for wire (10pcs) |
1 x | 2,3 mm Prop Adapter M5 |
1 x | Wing OXY 5,0 m2 |
1 x | CESSNA 50E White/Blue |
1 x | 290 mm M5 Prop shaft |
1 x | Snap short M2 (10 uds) |
1 x | BALSA trip 5.0x5.0x1000 mm |
2 x | Blind nut M8 (10 pcs) |
2 x | Futaba FX36 2.4GHz FASST Test + R7008SB |
2 x | Blue aluminium double servo arm V3-Hitec 3,5inch |
2 x | Thread locker IC-Loc™ green "wicking" 10 ml |
1 x | Spinner propeller pleg. 40 mm / 5,0 mm |
1 x | Propeller CFK 18x16 |
1 x | DPS Switch Ampere |
1 x | DG-303 ACRO 3750 mm, canopy |
1 x | Streamline Stainless Steel Tubing 14.5x9.6x1000 mm |
1 x | F3A carbon 80 mm spinner for Spark EVO |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 50m |
1 x | Carbon fiber flat 1000x3.0x1.0 mm |
1 x | 19 mm 2:1 black termoretract tube |
1 x | Motor mount EDGE 540 48" |
2 x | Adapter 3,0 mm M8 |
1 x | Hard brass tubing (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
1 x | TP/TopFuel - JST-EH 4/5S Adapter |
1 x | Socket Head Screw M2x5 |
1 x | Glass fabric 390 g/m² (silane, twill) 100 cm x 20m |
2 x | Spinner propeller pleg. 32 mm / 5,0 mm |
1 x | RH long aluminium horn (2pcs) |
2 x | XH female balance (4S) connector (2 pcs) |
2 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
1 x | Filter Capacitor JR |
1 x | Antenna Cloverleaf 5.8 GHz Tx - Rx |
1 x | SPS 70V 100/200 A |
1 x | MULTIPLEX ALUMINUM CASE "M-LINK" |
1 x | Pin type hinge Al 6x98 mm (2 pcs) |
1 x | Threaded coupler M3 (10 uds) |
1 x | Screws set for Hitec MG arms servo |
1 x | Junta selladora, Tacky Tape Gris 2.75mmx12mmx15m |
1 x | Futaba 30 mm servo rounded arm |
1 x | Servo HITEC HS-7985 High Torque Metal Gear Coreless Servo |
1 x | Servo HITEC D950 TW |
1 x | PowerBUS Lead 90 cm |
2 x | DPSI Micro SingleBat 5.9V/7.2V magnetic switch |
3 x | Anodized alum. M4x0,7x20 mm Button Head screw (4 dark blue pcs) |
2 x | Split pin 1.6x16 mm (10 uds) |
1 x | Interruptor RX/Batterie |
2 x | Adapter 3,0 mm M6 for spinner 40 mm fixed propeller |
1 x | Styrene plate 320x120x0.5 mm |
1 x | Glass Bubbles 0.19 g/cm³ Panda, tin/ 120 g (approx. 1 l) |
2 x | 6,4x1000 mm 2:1 blue termoretract tube |
1 x | Yellow silicone 0,5 qmm wire (50 m) |
1 x | TAKEO 3.6m electric |
1 x | Gold aluminium servo arm V2-JR 1,0" inch M3 |
1 x | ABS angle 6,0x6,0x1000 mm |
1 x | Aluminium Hub "Z" for folding Props 30 mm M8 Shaft 5 mm |
2 x | Fiberglass plate 620x540x3,2 mm |
1 x | Servo HITEC HS-5625 MG Digi |
2 x | Futaba Multi-Switch-Prop 12+2 MODUL |
1 x | Cable set PREMIUM , fuselage/wing one4one |
1 x | Faucet FESTO |
1 x | Propeller CFK 13x7.5 |
1 x | Spinner Alumin. fixed propeller 40 mm / 5,0 mm |
1 x | Gear set HITEC HS-311/322/325BB |
1 x | Carbon plate 350x150x3.0 mm |
1 x | SAVOX SH 0255 MG servo |
1 x | Fiberglass plate 350x150x3.0 mm |
3 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
1 x | HBC 10035-3 32-Bit |
2 x | Nylon hinge 15x0,3 (10 pcs) |
1 x | Prop rubber XS set 4 pieces |
1 x | Legs + electric brakes for Viper Jet 1700 mm |
1 x | Servo HITEC HS-45 HB |
1 x | Logo 400 SE VBar |
1 x | SPARK Switch 7.4v |
1 x | Carbon fiber rod 6.0 mmx1000 mm |
1 x | Thread locker IC-Loc™ red "high" 10 ml |
1 x | Race 300 |
1 x | Angled clevis with threaded rod M3 |
1 x | Plastic wheels 30 mm (2 pcs) |
1 x | Fiberglass plate 350x150x2.5 mm |
1 x | DPSI RV Mini 6 Magic |
2 x | Combo 4 pcs AXI 2204 Multicopter |
2 x | Vacuum bag, 1200 mm x 50 m |
2 x | Teflon rollers 80 mm x 15 mm Diam. |
1 x | Silicone red 1,5 qmm wire ( 25 m) |
1 x | DC Small for MultiLog & UltraLight |
1 x | Servo Mount S (red) |
2 x | Spinner NUT 1/4x28 |
1 x | 5 mm Prop Adapter M8 |
1 x | Glass fabric 80 g/m² (Interglas 05533, finish FK 144, twill weav |
2 x | Blind nut M6 (4 pcs) |
1 x | Canopy Latch |
1 x | Set freno para ruedas Dia. 127 mm |
1 x | Blue aluminium double servo arm HITEC 40 mm M3 F3A |
5 x | Ka 8 B (Top Model) |
3 x | Antena FUTABA 35 mhZ 3PM/3FRF/4V/4Y/6EX/6X/6Y/7C |
1 x | Anodized alum. M4x0,7x25 mm Button Head screw (4 blue pcs) |
3 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm) |
1 x | Aluminium M2x12 mm screw (4 pcs) |
1 x | Futaba 20 mm servo arm |
2 x | Split M1,2x10 (10 pcs) |
1 x | TMM 1210-3S heli |
2 x | Futaba Radio Case |
1 x | Servo SAVOX SV-1270 TG |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø14 mm, Ø12 mm) |
1 x | Fiberglass plate 1200x1000x0,2 mm |
2 x | Propeller drill jig DA 100/85/120/150/200 and VM 60-210 |
1 x | Silicone black 1,0 qmm wire ( 1 m) |
3 x | THERMIK XXXL 4,9m CFK Electric |
1 x | Male Prolonger TP 4/5S |
1 x | Servo HITEC HS-635HB Carbonite |
1 x | Gear set HITEC HS-125MG/5125MG |
2 x | Servo SAVOX SV-1273 TG |
1 x | Transparent spiral protective cover for wires Ø 0,5/50 mm - 25 m |
1 x | Fully Threaded Steel Rod Duralumin 40 mm M3 (2 pcs) |
1 x | Round Rod 2,5x1000 mm |
1 x | Strip ABS 2.0x10.0x1000 mm |
2 x | CC 05 |
1 x | Transmitter JETI Duplex DS-24 EX Carbon Line Dark BLUE Multimod |
1 x | XTorque CFK Servohebel 38 |
2 x | Silicone 0,14 qmm servos wire Graupner (100 m) |
1 x | Spinner Alumin. propeller pleg. 40 mm / 4,0 mm |
2 x | Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø7.1 m) |
1 x | XH male balance (6S) connector (2 pcs) |
1 x | DJI Mavic Air Fly More Combo |
1 x | Round Rod 6,0x1000 mm |
1 x | Aluminium Hub for folding Props 55 mm M8 Shaft 6 mm |
1 x | Rudder 2_Tray 3~3.5 inch |
1 x | Oracover Yellow CUB 2 m |
2 x | Round Rod 1,0x1000 mm |
1 x | Propeller CFK 15.5x10 |
1 x | Set brocas Ø 1.2-1.4-1.6-1.8 mm (4 pcs) |
1 x | Switch Cap M (red) |
1 x | 40 mm air cylinder |
1 x | Red aluminium servo arm V3-Futaba 1,25inch M3 |
1 x | Decorative caps, multicoloured |
1 x | DPS Switch JR/JR |
1 x | Strip 2,5x1,25x330 mm |
1 x | CF tube (L 1000 mm, Ø1 mm, Ø0,5 mm) |
1 x | Switch Cap L (Red) |
2 x | Futaba Aero Large Case - Internal Foam |
1 x | JETImodel Addcap 1640 |
1 x | Futaba 25 mm servo arm with M3 ball link |
2 x | UBEC 6A KAVAN |
1 x | Glass fabric 49 g/m² (1,27 x 5 m) |
1 x | Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CW thr |
1 x | Dust collector for mould cleaning |
1 x | Motor Moki S 400 cc 5 cylinders |
1 x | Screw M2x6 (10 pcs) |
2 x | 30 cm BEC cable (male) |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
2 x | Servo HITEC HS-645 MG |
1 x | Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø26 mm) |
2 x | Spinner propeller pleg. 48 mm / 6,0 mm |
1 x | Ply-Span 450x600/13g Orange |
1 x | PARAGON Trainer 46-55 1580 mm |
2 x | SERVO DES 588 BB MG |
1 x | Spinner white 30 mm |
1 x | Triple rod con. 3mm Pushrod (2 pcs) |
1 x | T-Hose connector 4-4-4mm |
1 x | DPSI Micro - RCS RV |
1 x | Ventus 2cx 4.5 m de Luxe |
1 x | Fox MDM 1 4000 mm Std. |
1 x | Blue aluminium servo arm V3-Hitec 1,0inch M3 |
1 x | Screw-lock connector Ø 2 mm (2 uds) |
1 x | White smoke bombs AX-60 (5 pcs) |
1 x | Servo HITEC D951 TW |
1 x | Servo HS-5070 MH Hi Volt |
1 x | ABS tube 5.0x4.0x1000 mm |
1 x | Central support Speed 280 |
1 x | Vacuum pump 12 CFM |
1 x | Fabric scissors curved (offset handles), 16 cm / 6" length |
1 x | Quick hose connector 3-3 mm |
1 x | Motor DA 50-R |
2 x | Spinner Alumin. fixed propeller 45 mm / 5,0 mm |
1 x | Xplorer4 anemometro |
1 x | 2020 motor power ring |
1 x | Treaded hexagonal socket insert M4 Br (4 pcs) |
1 x | Horizontal servo holder |
1 x | Carbon fiber rod 1.5 mm x 1000 mm |
1 x | Propeller CFK 14x10 |
3 x | AXI 2204 Multicopter |
1 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
1 x | Cierva C30 spanish decoration Stickers |
1 x | Spinner propeller pleg. 30 mm / 4,0 mm |
1 x | Fully Threaded Steel Rod Duralumin 60 mm M3 (2 pcs) |
1 x | Stainless steel cable Ø 0.5 mm (20 m) |
1 x | Spinner 60 mm White (Kavan) |
1 x | Motor mount VANQUIST 48" F3A |
1 x | Three-function control switch by FUTABA |
1 x | 51 mm white plastic spinner for fixed propeller / 4,0 mm axi |
1 x | Cabel "Y" 30 cm (Futaba) |
1 x | Moki Pushrod S250 (1 pcs) |
1 x | Smoke set "S" |
1 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Transmitter Balancer Futaba T-10CG |
1 x | Sprung retractable undercarriage (Alfa model) |
2 x | Carbon tube 3K-PW (L 2000 mm, Ø20 mm, Ø18 mm) |
1 x | Lock washer 3.2 mm (20 pcs) |
1 x | Mahogany wood slat 1.5x1.5x1000 mm |
1 x | 40 mm 1/4" Race propeller (rigth hydropropeller) |
1 x | Servo SAVOX SA-128S SG |
1 x | Cable silicona female batt. receptor 30 cm (Futaba) |
1 x | Foam plastic plates (310x210x8 mm) |
1 x | 4 LiPo XH>EH adapter |
1 x | One touch canopy lock |
1 x | Release film 100 cm x 50 m |
1 x | ABS tube 4.0x3.0x1000 mm |
1 x | DPSI V-Match |
1 x | Softshell Hispano Aviación |
1 x | Savox Brushless Servo SB-2271SG |
2 x | Futaba 46 mm servo arm with ball link |
2 x | Steering arm 12 mm Ø 4 mm (2 uds) |
1 x | Male connector for 20 pines AWG |
1 x | NF-3X-80 liner Kit |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
1 x | Adapter 3,0 mm M5 for spinner 30 mm fixed propeller |
1 x | Cockpit metalic closing |
1 x | Wheel collar 2 mm Ø (4 uds) |
1 x | Tapping Screw M2.9x13 (10 pcs) |
1 x | GPS, Vario and altitude Sensor SBS-01G |
1 x | Epoxy 40 min (Resin). 5 Kg |
1 x | Coupling for 3,2 mm axis |
1 x | Spinner INOVA 63 mm White |
1 x | Carbon tube (L 1000 mm, Ø4 mm, Ø3 mm) |
2 x | Spinner propeller pleg. 30 mm / 3,0 mm |
1 x | Shirt Hispano Aviación |
1 x | Socket Head Screw M2x8 |
1 x | Servo HITEC HS-7975 TG |
1 x | Pulley brass 6/1,5 (2 pcs) |
1 x | Superlight deluxe wheel 62 mm (2 pcs) |
1 x | Screw M2.5x5 (10 pcs) |
1 x | 2 piece mounting frame Battery 3200 / 4000 |
1 x | Peel ply 64 g/m² (plain weave) 150 cm x 10m |
1 x | EWC3 40 cm wing connector |
1 x | MPX screwable clips (5 pcs) |
1 x | Extractor piñones 2.3/3.2 mm |
2 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) |
1 x | Silicone black 0,75 qmm cable ( 1 m) |
1 x | PowerBUS Splitter |
1 x | Hexagonal Nut M4 (20 pcs) |
1 x | Blue Aluminium double servo arm V3-Hitec 3-3,5inch |
1 x | Propeller CFK 15x15 |
1 x | Thread locker IC-Loc™ blue "medium" 10 ml |
1 x | TrainerCord (master-learner) |
1 x | Floating M4 washer pad (36 pcs) |
2 x | Optical RPM Sensor |
1 x | Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø28 mm) |
1 x | Spinner propeller pleg. 36 mm/6,0 mm/0º |
2 x | 3 LiPo XH>EH adapter |
1 x | Servo HITEC HS-225 BB |
1 x | Cyanoacrylate MD GLUE plus 405, for extreme loads 20g |
1 x | Gear set HITEC HS-56 HB |
1 x | Blind nut M5 (4 pcs) |
1 x | Extension 100 cm (Futaba) |
1 x | KIRA 400-39 5,2:1 |
1 x | Tirpiz Battleship 1:200 |
1 x | Cyano INSTA - CURE™ Pocket (18g) |
1 x | Screw M4x12 (10 pcs) |
1 x | Propeller CFK 16x16 Wide |
1 x | Gear set HITEC HS-81 |
1 x | Electronic switch JETI SP6 0-15v/6A |
2 x | Savox Brushless Servo SC-1267 SG |
1 x | Thermoforming sheet 0.5mm (0.02in) DIN A4 |
1 x | Extension silicon 50 cm (Futaba) |
1 x | BULLIT Wing 1095 mm |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 7 mm |
2 x | Absorver mount set for 5-10 Kg models |
1 x | 36,0 mm propeller (rigth propeller) |
1 x | Allen wheel collar M4x4 |
1 x | Baffles for Radial Moki S180/320 mm |
1 x | Pine wood slat 2.0x10.0x1000 mm |
1 x | Dummy motor GPW Wasp Scale 1/4 |
1 x | DPSI Ampere battery backer |
1 x | KIRA 500-36 6,7:1 |
1 x | NF-3 RC set |
1 x | resin-hardener package L-385 with hardener H-385 (875 g) |
1 x | Silicone red 0,75 qmm wire ( 25 m) |
1 x | Canopy Astra |
1 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 2 cell |
1 x | Servo SAVOX SV-1260 MG |
2 x | STEERING FRONT WHEEL SYSTEM BIDULE 55 |
1 x | Monokote PLATINO metalizado (1.8x0.65m) |
1 x | Propeller CFK 18,5x12 |
1 x | Servo HITEC HS-785 HB |
1 x | Propeller APC 14x8.5 Electric |
2 x | Round Rod 1.0x3.5 cm |
1 x | EWC6 40 cm wing connector |
1 x | Spinner negro 40 mm |
1 x | Pinion 13 - 2 mm |
1 x | Fiberglass 163 g/m² 1m x 50 m (Aero, finish FK 144, plain) |
2 x | Small aluminium horn gold (2pcs) |
1 x | Spinner propeller pleg. 38 mm/6,0 mm/0º |
1 x | Fully Threaded Steel Rod alumin 60 mm M2,5 (2 pcs) |
1 x | |
1 x | Fully Threaded Steel Rod M3 |
1 x | Spinner propeller pleg. 36 mm / 6,0 mm |
1 x | Spinner NUT M5 |
1 x | Extension S-Bus 1-2 silicon 30 cm FUTABA |
1 x | Spinner INO 82 mm Chrome (Imitacion metal) |
1 x | 15 mm floating pad (30 pcs) |
1 x | Propeller RF CFK 10x17 |
1 x | Propeller CFK 18x9 |
1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
3 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
1 x | Cockpit aluminium closing 4.7g |
1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
1 x | Wheel collar 3 mm Ø (4 uds) |
1 x | Spinner propeller pleg. 40 mm / 3,0 mm |
1 x | Spinner propeller pleg. 40 mm / 4,0 mm |
1 x | Circlik for shaft 3.2 mm (10 pcs) |
1 x | T-Hose connector 6-6-6 mm |
1 x | 10 mm floating pad (72 pcs) |
1 x | Propeller Pleg CAM Carbon 12x5 |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm) |
1 x | Superlight wheel 125 mm with valve (2 pcs) |
1 x | 31,0 mm propeller (rigth propeller) |
2 x | EASYGLIDER 4 RR |
1 x | Hexagonal Nut M3 (10 pcs) |
1 x | PS-050 TONEGAWA Servo |
1 x | Spinner Alumin. fixed propeller 45 mm / 4,0 mm |
1 x | Flex-headers for Valach VM 85B2-FS |
1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Pinion 15 - 3,2 mm |
1 x | Servo SAVOX SA-1258 TG |
2 x | Fascination 3600 mm, Canopy (Top Model) |
2 x | SWTU2 switch |
2 x | Gear carbonite set HITEC HS-6965 |
1 x | Conector BEC female (10 pcs) |
1 x | 12.7 mm 2:1 black termoretract tube |
1 x | Sheave Pl. 2R. 3 mm |
1 x | Thruster propeller 30/33 mm with motor 400 7,2V |
1 x | PowerBUS Lead 200 cm |
1 x | wing/fuselage connector for 16 pines AWG 20-24 |
1 x | Pan Head Screw M2x8 PH countersunk head |
1 x | Spinner propeller pleg. 38 mm/6,0 mm/7º |
1 x | OPTOTRONIX Aurora LCU |
1 x | Tapping Screw M2.2x9.5 (10 pcs) |
1 x | XH male balance (8S) connector (2 pcs) |
2 x | Lock nut M6 (10 pcs) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø20 mm, Ø18 mm) |
1 x | PC-21 PILATUS Spinner Scale Red 3 Blades |
4 x | Pegasus 2050 mm F4J (Top Model) |
1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
1 x | Landing gear strap medium (4 uds) |
2 x | Nylon hinge 20x15x0,3 (10 pcs) |
1 x | Spinner Alumin. propeller pleg. 30 mm / 2,3 mm |
1 x | Actuator Electric 25 mm HIGH TORQUE |
1 x | GlassBubbles 2.5 g/cm³ Panda, tin (approx. 1 l) |
1 x | 40,0 mm hydro-propeller (left hydropropeller) |
1 x | Cable grommet Ø 4 mm (4 uds) |
1 x | 4,8x1000 mm 2:1 red termoretract tube |
2 x | 25 mm reinforced hinge |
1 x | Transmitter JETI Duplex DS-24 EX Multimode |
1 x | Rigid coupling brass Ø 5 mm L: 25 mm |
1 x | DPSI Ampere & Voltage bundle |
4 x | Battery FUTABA Li-Fe 2100 mAh 6.6v 4PLS/4PX/8J/10J/14SG/18SZ |
1 x | Pushrod octagone 3/2 |
1 x | Carburator gasket MOKI |
1 x | Switch moment button, 2 functions, long FUTABA |
1 x | Hexagonal Nut M1 (10 pcs) |
1 x | Capstan of plastic 88x30x36 mm |
1 x | Y Cable |
1 x | Fully Threaded Steel Rod Duralumin 70 mm M3 (2 pcs) |
1 x | Propeller shaft supports 7mm (3 pcs) |
1 x | Trike XL motor set (motor+esc+prop) |
2 x | Adapter 3,2 mm M5 for spinner 30 mm fixed propeller |
1 x | Life guard Ø 8 mm (24 pcs) |
1 x | Servo HITEC HS-5685MH |
1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
1 x | Mounting base Ms 12 mm |
1 x | Extension PVC 150 cm (Graupner) |
2 x | Micro control horn (2 pcs) |
1 x | Window mounting channel Type H 2.5x0.5 (2 m) |
1 x | 57 mm white plastic spinner for fixed propeller / 4,0 mm axi |
1 x | Spinner propeller pleg. 38 mm / 5,0 mm |
1 x | Propeller APC 10x7 SF |
1 x | Adapter 4,0 mm M8 |
1 x | Cyano SUPER - GOLD™ THIN (12g) |
1 x | Stainless steel cable Ø 0.62 mm (10 m) |
1 x | 400 Newtons FEMA absorber |
1 x | Wing bolts M6 Steel screw Red (2 pcs) |
2 x | ABS tube 20.0x18.0x1000 mm |
1 x | Control horn long w/ball |
1 x | Sliding window 1:2,4 / 1.2,6 Scale |
1 x | 18m Fitting barb |
1 x | Program 5v SIO RS 232 |
1 x | Extension silicon 100 cm (Futaba) |
1 x | PVC 0,14 qmm servos wire JR/Graupner (5 m) |
1 x | Spinner propeller pleg. 40 mm / 3,2 mm |
1 x | PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m) |
1 x | Peel ply 100 g/m² (plain weave) 50 cm x 2m |
1 x | Spring pin Ø 1 x 6 mm (10 pcs) |
1 x | Split pin 1x8 mm (10 uds) |
1 x | DC-3 Douglas (DAKOTA) 1800 mm |
1 x | Spinner propeller pleg. 30 mm / 3,2 mm |
1 x | SERVO DES 707 BB MG |
1 x | Futaba 25 mm servo arm with ball link |
1 x | JIVE 80+HV Esc |
1 x | ABS tube 9.0x7.0x1000 mm |
1 x | Blade holder lower |
2 x | Servo Fork |
1 x | XH male balance (5S) connector (2 pcs) |
1 x | Metal ball clevis M3 (10 uds) |
1 x | 150 Newtons FEMA absorber |
1 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 4 cell |
1 x | Optotronix Aurora Plug |
1 x | Fiberglass 163 g/m² 1m x 20 m (Aero, finish FK 144, plain) |
1 x | Antena FUTABA receptor Standard 2.4 GHz ( 200 mm aprox.) |
1 x | Fully Threaded Steel Rod alumin 90 mm M2,5 (2 pcs) |
1 x | ABS tube 2.0x1.0x1000 mm |
1 x | Pulley brass 5/1,5 (2 pcs) |
1 x | Gear set HITEC HS-65 HB |
1 x | Metalic nose for PROJETI |
1 x | Spinner propeller pleg. 42 mm / 6,0 mm |
1 x | POWER PEAK D7 EQ-BID 12V/230V-Duo Charger |
1 x | KIRA 400-34 |
1 x | Spinner INO 70 mm Chrome (Imitacion metal) |
1 x | Spinner propeller pleg. 45 mm / 6,0 mm "Z" |
1 x | MPS Gas-Cap-Powerswitch |
1 x | 11 mm Rubber pads (14 pcs) |
2 x | Fascination 3600 mm (Top Model) |
1 x | OBECHI sheet 2.0x3.0x1000 mm |
1 x | Gearbox KPG25 5,2:1 |
1 x | Adapter 3,2 mm M6 for spinner 40 mm fixed propeller |
1 x | Treaded hexagonal socket insert M3 Br (4 pcs) |
1 x | ABS I Strip 20x10x1000 mm |
1 x | Sanyo Eneloop AAA 1,2 V battery 800 mAh |
1 x | Wing conexion 2 servos JR/Graupner 50 cm |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
1 x | BABY glider (Aero-naut) |
1 x | Glidder Mü13e (Bergfalke) |
1 x | Chili Race F3K 2 wing servo mounted(carbon biax) |
1 x | MYSTIQUE 2.9 m ARF |
4 x | Ion Pro, Canopy (JP Model) |
2 x | Albatros ,spare fuselage (Top Model) |
1 x | DINO Glider ARC |
1 x | Glider Ka 7 Red (2540mm) |
2 x | X-RAY Micro QR (Fuselage with canopy) |
3 x | Ion Pro, Wing joiner (JP Model) |
4 x | NIKE-2 EVO ARF |
1 x | Ion Pro NG electric with flaps ORANGE (JP Model) |
2 x | ACTIVE ARF Electric 1.995 mm |
3 x | Aero-Master (Aero-naut) |
1 x | Fascination 3600 mm ARC |
2 x | Flip ARF (Top Model) |
1 x | HERON RR |
1 x | ALBATROS 3.0 m (orange/white) |
2 x | Ion Pro, Elevator (JP Model) |
4 x | Ion Pro, Fuselage (JP Model) |
3 x | Challenger ARF (Top Model) |
3 x | X-RAY Micro QR (Tail Tube) |
1 x | Aero-Master Wings (Aero-naut) |
3 x | Fascination 3600 mm, Spare Wings (Top Model) |
1 x | Astra wing Joinner (Top Model) |
1 x | Chili Race F3K (aramid nose) |
1 x | Navaho new design (Top Model) |
2 x | Prelude ARF 2500 mm, spare wing (TopModel) |
3 x | Prelude ARF 2500 mm (TopModel) |
1 x | LENTUS Multiplex Fundas alas |
2 x | SWEET Electro ARF "CFR fuselage " (Top Model) |
2 x | LENTUS RR 3.000mm MULTIPLEX |
2 x | LENTUS Multiplex Propeller 8x6 |
3 x | Siesta T tail (Topmodel) |
2 x | Premiant II (Aero-naut) |
3 x | XENON RC (Aero-naut) |
1 x | ORCA C64 Pro V 3.6m |
1 x | Opale Rucksack |
1 x | AXI 2808/20 V2 Long |
2 x | Aero-Master Cabine (Aero-naut) |
1 x | XPower XC4226/12 LS |
1 x | Cooler motor type 300 |
1 x | Hacker A30-S Radial Set |
1 x | Cooler motor type 150 |
1 x | Ø 40 mm fiberglass motor-holder for electric motors |
1 x | Bearings for motors hacker A50 |
1 x | Motor A20-20 L EVO |
1 x | Horn mando long (2 pcs) |
1 x | Glases Nimbus "Black" |
1 x | Dean-T Plug Mold |
1 x | Extra-long adjustable aluminium control horn 2,8x34 |
1 x | Aramid fibre shears Proton®, 21 cm / 8" length |
2 x | Flap hinge 33x9 mm (6 pcs) |
1 x | |
1 x | Motor 2212 (1000KV) Quadcopter F450 |
1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
1 x | Glases Moritz |
2 x | Glases Stratus |
1 x | Brass control horn M4 long for wire (4 pcs) |
1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
1 x | Glases Ace |
1 x | Small pinned hinge (12 uds) |
1 x | Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC |
1 x | Dremel PERMAGRIT thin lime |
1 x | Wing tips support for AX-18/AX-60 (2 pcs) |
1 x | Horn 5/10 with M2 Bearing |
1 x | 10m servo "Premium" wire (white/red/blue) |
1 x | Motor brushless 1806 - 2300 Kv Cuadracopter |
1 x | 152x46 Ø6.0 mm aluminium core wheel |
2 x | Spray YELLOW Inca Lexan 150ml |
1 x | 280 cc gasoline fuel tank complet |
1 x | ABS angle 4,0x4,0x1000 mm |
1 x | ABS angle 3,0x3,0x1000 mm |
1 x | Profile ABS Square 2 x 1000 mm |
2 x | 1/6 Pilot "John" |
1 x | Profile ABS half cane 2.5x1000 mm |
1 x | RUDDOG Protection and Heat Shield Tape (2mx50mm) |
1 x | 20 g tin paste |
1 x | Piloto RC Civil 1/5- 1/6 Scale 12" |
1 x | ABS rectangular profile 10x5.0x1000 mm |
1 x | 1/6 Pilot "Tony" |
1 x | BETA 1400 RTF Red |
1 x | Skyray (RBC Kits) |
1 x | Freewing F-14 Tomcat Twin 80mm EDF PNP (Deluxe Edition) |
1 x | Equipment set XL |
1 x | F9F Panther (Aero-naut) |
2 x | Avanti S 1.8m Jet FREECE TRICOLORI |
1 x | de Havilland Vampire (Rc Factory) |
1 x | MIG 29 3D RTF Red Start SET + Gyro |
1 x | THERMIK XXXL 4,9m D-Box Electric |
1 x | CHALLENGER Indoor |
2 x | THERMIK DREAM 3.000 mm (Topmodel) |
2 x | Avia (Top Model) |
2 x | LENTUS Multiplex Landig gear retract |
1 x | ASG 32 560 mm |
2 x | Poerfly |
1 x | TAKEO 3.6m |
1 x | MXS-C (Mini) Blue |
1 x | Servo HITEC HS-45 HB, servo box |
3 x | ASH 31 6.08m Composite Hollow Molded |
1 x | Servo GO-1017MG 4.5 kg.cm 0.10s/60º |
1 x | Black 2,4 GHz antenna exit guides (2 pcs) |
1 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
1 x | Fast attachment for servos (25 pcs) |
1 x | Servo KST X20 8.4-50 V8.0 45kg 8.4v Softstar |
1 x | 3,9 mm ZG20-ZG38 servo arm |
1 x | Motor Mega AC 16/07/06 |
1 x | Motor Mega AC 22/45/03 E |
1 x | Motor Mega AC 16/15/03 |
1 x | Actro 32-3 Heli MAX 5mm |
1 x | Motor Mega AC 16/15/05 CE F5J |
1 x | MEGA AC 16/10/03 Race + PG 5:1 F5J motor brushless |
1 x | Motor Mega AC 16/15/07 COMBAT |
1 x | Motor Mega AC 16/35/01 |
1 x | Motor Mega AC 16/25/04 |
1 x | Motor Mega AC 16/15/04 COMBAT |
1 x | Motor Mega AC 22/30/02 |
1 x | Motor Mega AC 16/30/01 |
1 x | Rocket D3-P |
1 x | Rocket cardboard tube 50mm x 48mm x 250mm |
2 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
1 x | Small control horn with bearing (2 pcs) |
1 x | PVC 0,14 qmm servos wire Graupner (100 m) |
1 x | Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC |
1 x | PVC 0,08 qmm Futaba servos wire (5 m) |
1 x | Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC |
1 x | 200m servo "Premium" wire (white/red/blue) |
1 x | Nitroverdu 500 ml |
1 x | Spray adhesive AEROFIX 2 |
1 x | Waterproof adhesive tape, width 19mm, length 25m |
1 x | Spinner Alumin. propeller pleg. 30 mm / 4,0 mm |
1 x | Spinner INO 63 mm Chrome (Imitacion metal) |
1 x | Yellow smoke canister 100 g |
1 x | Small adjustable control horn with bearing |
1 x | Wooden mouth spatulas (150 x 18 x 1.5 mm), 100 pcs |
1 x | Red smoke bombs AX-60 (5 pcs) |
1 x | Glases Nimbus |
1 x | Green smoke canister 140 g |
1 x | Ventral support for AX-18/AX-60 |
1 x | Plastic caps for AIR BURTS (30 pcs) |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm |
1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
1 x | Tachometer HANGAR 9 digital |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 m |
1 x | ROBART POINT HINGE 4,7mm (5 pcs) |
1 x | Set Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | XT-60 Plug Mold |
1 x | Short adjustable control horn 3x24 |
1 x | XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 3 cell |
1 x | XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 5 cell |
1 x | JR silicone servo wire 0,35 qmm / 5m |
1 x | White silicone 0,25 qmm wire (150 m) |
1 x | Silicone 0,25 qmm servos wire Graupner (5 m) |
1 x | PVC 0,35 qmm servos wire Graupner (100 m) |
1 x | 1 m servo "Premium" wire (white/red/blue) |
1 x | Green silicone 0,25 qmm wire (50 m) |
1 x | Silicone red 0,25 mm² wire (25 m) |
1 x | F-104 Starfighter USAF (SebArt) |
1 x | 3-blades 28x12 carbon prop Super Silence |
1 x | 22x10 BIELA pusher propeller |
1 x | 16x10 BIELA propeller (3-blades) |
1 x | 18x10 BIELA propeller SCALE (3-blades) |
1 x | Futaba BLS152 - Upper Case |
1 x | Servo inverter |
1 x | Futaba T6K-V2 8Ch 2.4 GHz T-FHSS Air |
1 x | Futaba SBS-02A Air Pressure Telemetry Sensor (FASSTest/T-FHSS) |
1 x | SE Ring 330 mm (4 pcs) |
1 x | Hobbylite Filler, Balsa colour |
1 x | Spannlack 1000 ml |
1 x | Foil for sticking flaps and ailerons |
1 x | Plasti Dip Liquid Tape 429 ml black |
1 x | Aluminum Fold Prop Spinner 34 mm / 3 mm |
1 x | Spinner Alumin. fixed propeller 45 mm / 6,0 mm |
1 x | Canopy F9F Panther (Aero-naut) |
1 x | Mini AVANTI S EDF 80MM RTF Combo Lipos 5000-6s (SebART) |
1 x | Mini AVANTI S EDF 80MM RTF |
1 x | Combo FOXY C3530-700 + FOXY 80 amp |
1 x | VIPER JET G2 Esq. 5 Green/White/Blue |
1 x | FANTASY ARF 3.0m, Fundas alas |
1 x | Solvent Plasti Dip 1000 ml |
1 x | PVC 0,14 qmm servo wire Futaba (5 m) |
1 x | Protective Cover for wires Ø 6 mm 1000 mm |
1 x | 19x10 BIELA propeller (3-blades) |
1 x | Motor Set CHALLENGER Indoor |
1 x | Futaba S-Bus Rx/Gyro Link Lead |
1 x | PIX Hawk with accesories |
1 x | Servo inverter |
2 x | Ant. Cable R606/17/08/14FS L:1500mm |
1 x | Futaba 32MZ 2.4GHz + R7108SB |
1 x | Servo BLS-M55B 61.2kg |
1 x | Futaba Multi-Switch-Prop 12+2 DECODER |
1 x | Futaba Neckstrap |
1 x | Cable S.BUS 3 salidas 300 mm |
1 x | Futaba T3PV T-FHSS |
1 x | Antena FUTABA receptor Standard 2.4 GHz ( 160 mm aprox.) |
1 x | Cooler motor type 280 |
1 x | Emisora FUTABA T18 SZ + R7208SB |
1 x | Motor holder for AC 28/7 |
|
278,265.73EUR |