1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
3 x Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
2 x USB Mini Camera endoscope
1 x 800TVL CMOS camera for FPV
1 x Big-Malibu XL Roof box with surfboard rack GREY
1 x Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x Connectors banna gold 5,5 mm (M/F)
1 x Connectors banna oro 3 mm (M/F)
1 x Extension lead 15 cm Multiplex
1 x Vacuum pump P1-N
1 x 3 copper lacquer wire Ø0,2 mm (1 m)
1 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x Support Filtro FESTO
1 x Support ECU Xicoy X-45
1 x Hot Glue Stick BLACK
3 x Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
2 x Futaba BLS152 - Upper Case
1 x Tail tube RAINBOW
1 x aluminium servo arm V1-JR 1,0 inch M2
2 x Servo FUTABA SBL 471 SV
1 x Servo HITEC D645 MW
1 x Aluminium servo arm (2 uds)
1 x Red aluminium servo arm V3-Futaba 3,5inch
1 x Ferrita 14x8x5.5 mm
1 x Threaded coupler M3 (10 uds)
1 x Ball link duraluminium M3 V1 (10 pcs)
1 x Aluminium blue ball links M3 V1 (10 pcs)
1 x Ball Link M2 with Ball and Hardware, 10 pcs
1 x Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
1 x Futaba 25 mm servo arm with M3 ball link
1 x Futaba 30 mm servo rounded arm
1 x 46 mm Futaba servo arm tandem with ball link
1 x 54 mm Futaba servo arm tandem with ball link
1 x Servo TOPMODEL S7520 MG
1 x Alu servo arm double RHINO
1 x Pilot LA 500
1 x LA500 front gear holder
1 x LA500 pre-rotation gear hub
1 x Servo Dymond D 37 Eco
1 x Blade Holder Full (4 blades)
1 x Red aluminium servo arm V2-Futaba 1,0" inch M3
1 x Servo HITEC HS-5084 MG
2 x Servo holder for retract
1 x Servo HS-5070 MH Hi Volt
1 x Blue aluminium servo arm V1-Hitec 20 mm M2
1 x Gold aluminium servo arm V2-JR 1,5" inch M3
1 x Servo Mount M (blue)
1 x Servo HS-5565MH High Voltage
1 x Servo GO-1073MGW 32 kg.cm 0.135s/60º
2 x Servo FUTABA BLS173 SV
1 x Red aluminium servo arm V3-Futaba 1,5inch M3
1 x Servo HITEC HS-5125 MG Slim Metal Gear Wing Servo
1 x Softshell Hispano Aviación
1 x VIPER JET G2 Esq. 2 White/Red
1 x Ball link Aluminio M3 (2 pcs)
1 x ALBATROS L-39 G2 "Camo Tiger" Turbine ready
1 x Aro pasacable Ø25 mm (4 pcs)
1 x Balsa panel 2.5x100x1000 mm
1 x Baseplate servo
1 x Balsa panel 8.0x100x1000 mm
1 x BALSA trip 6.0x6.0x1000 mm
1 x Balsa panel 2.0x100x1000 mm
1 x Balsa panel 1.0x100x1000 mm
1 x Ball Link Plier
1 x Bags wings/rudder ODYSSEY
1 x Balsa panel 3.0x100x1000 mm
1 x BALSA triangular 10x10x1000 mm
1 x VIPER JET G2 Esq. 2 Red/White/Silver
1 x Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x Pin to cable coupler M1,6 ⌀ (6 pcs)
1 x Kwik link aluminio M3 L: 30mm (6 uds) pin Ø 2 mm
1 x Servo GO-1017MG 4.5 kg.cm 0.10s/60º
1 x Fuel bottle 500 ccm
1 x SERVO DES 707 BB MG
1 x 50 mm servo arm with bearing (2 pcs)
1 x Charger SKY RC e680
1 x Programador FUTABA USB CIU-3
1 x Servo FUTABA S 3072 HV S-Bus
1 x BALSA trip 3.0x3.0x1000 mm
1 x Bags de Luxe ODYSSEY
1 x Antenna Cloverleaf 5.8 GHz Tx - Rx
1 x BALSA trip 10x10x1000 mm
1 x BALSA trip 5.0x5.0x1000 mm
1 x Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x BALSA triangular 6x6x1000 mm
1 x Aro pasacable Ø20 mm (4 pcs)
1 x Balsa panel 1.5x100x1000 mm
1 x Bags MB-339 (Wings & Elevators)
1 x Balsa panel 10x100x1000 mm
1 x Balsa panel 4.0x100x1000 mm
1 x BALSA triangular 8x8x1000 mm
1 x Anodized aluminium servo M3x16 screw (4 red pcs)
2 x Bags de Luxe ASPIRE
1 x BALSA trip 2.0x2.0x1000 mm
1 x Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x Antenna holder bracket double
1 x BALSA trip 8.0x8.0x1000 mm
1 x Bateria LRP 2200-7.2v 6 cell NiMH
1 x Bags wings/rudder ASPIRE
1 x ASPIRE Red ARF 2.000 mm, Front Fuselage
1 x Servo BLUE Bird BLS-H71B v2
1 x Epoxy QUIK-CURE™ 5 min (130g)
1 x Metal clevis M3 (10 uds)
1 x Pin 2,5 to cable coupler M2,5 ⌀ pin 2,5 (6 pcs)
1 x Kwik link aluminio M3 L:30mm (6 uds) pinØ1.6mm Left
1 x Pulley brass 14/2 (2 pcs)
1 x Kwik link AL M3 L:40 mm (2 pcs) + Pin Ø 2,5 mm
1 x Micro clevis (10 uds)
1 x Ø 2 mm pin for Kwik link MPJ2162/2163 (6 pcs)
1 x M4xM2,5xL30 nylon clevis and arm (10 uds)
1 x Micro clevis (10 uds)
1 x Pulley brass 12/2 (2 pcs)
1 x Metal clevis M2 (10 uds)
1 x Kwik link aluminio IZD. M3 L: 30mm (2 uds) pin Ø 2 mm
1 x Metal clevis M2,5 (10 uds)
1 x Ø 1,6 mm pin for Kwik link MPJ2160/2161 (6 pcs)
1 x Metal ball clevis M3 (10 uds)
1 x Rubber bushing with bracket "A" type (2 pcs)
1 x Rubber bushing with bracket "B" type (2 pcs)
1 x Kwik link aluminio M3 L: 30mm (6 uds) pin Ø 2 mm
1 x Small kwik link (10 pcs)
1 x Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm
1 x Kwik link aluminio IZD. M3 L: 30mm (6 uds) pin Ø 2 mm
1 x Pulley brass 16/2 (2 pcs)
1 x Kwik link with arm M3xM2xL24
1 x Micro clevis 0.8 mm(10 uds)
1 x Ø 1,6 mm pin for Kwik link MPJ2150/2157 (6 pcs)
1 x Straightened rod Ø 1.0 mm x 1000 mm
1 x LA500 ciclic lever
1 x SERVO DES 588 BB MG
1 x Brazo servo KAVAN doble aluminio 25T - 2.5" M3
1 x XT60 Connector with Holder Male 2pcs
1 x Universal Charging Lead - 500mm - 4mm to Glow Plug Igniter
1 x Engine mounts for .09 - .19 engine
1 x BETA 1400 ARF Red
1 x LA500 pre-rotation gear
1 x 40 mm servo arm with bearing (2 pcs)
1 x Futaba 3010 - Gear Set
1 x Z-shaped servo mount
1 x Servo FUTABA BLS 276SV
1 x Servo BMS-4112
1 x L-shaped servo mount
1 x Shirt Hispano Aviación
11,140.41EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies