50.00EUR 15.90EUR

Mini-Pix Esc 15 Amp
[KON4002]


This products have a good performance and can ensure high efficiency (90% including when you're operatting under full gas avoiding overheating and flight time low) and competing with explosion engine's performance.

General features:
- Only for brushless motors.
- Soft start that rapidly rise up to the maximum power (providing security).
- RPM control for the velocities of drifts and the main rotor, great for travel in and out of the maneuvers.
- Auto-Programmable mode (APM) that automatically adjusts the variator to the radio's gas channel and sets the strength of stopping, and current and fast start limitations.
- Supply limitation.
- High performance microprocessor design thas controles the heat dissipation.
- Overheatting protection.
- Superflex high temperature cables.
- You can work with or without sensorizar engines.

Pix variator features:
- The new Pix variators are effective and low-cost; they're designed for brushless motors and replace Swing Kontronik series. The desig is entirely new. Compared with their predecessors, this variators have new and improved performance characteristics.

- The operation has been reduced to essentials things. Do not you know anything about timing / frequency? No matter; you don´t have to be an expert in engines to manage your Pix. Like their predecessors, the Pix variators, adapt themselves automatically to the engine. Thanks to their APM mode, there is no need to program it. You can concentrate on the basics: connecting the battery and fly! It's that easy!

- All variators come with a Pix Li-Po integrated that can turned on and off simply by pressing a button. In fact, a major goal in its design, was to build the variator optimized to work with rotary engines of a large number of poles like Kontronik Dancer.

- The Pix variators are an attractive alternative in cost, compared to Jazz Kontronik if you do not want any specific function such as strong BEC, unlimited partial load condition or high voltage input.

- Moreover, now the PIX drives are programmed through the interface ProgCARD.


few units
few units

Reviews

Customers who bought this product also purchased
AXI2203/40 VPP
AXI2203/40 VPP

few units
few units

Propeller Pleg CAM Carbon 6x3
Propeller Pleg CAM Carbon 6x3

few units
few units

Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
  
  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
    Brushless->
      Aero-Naut
      Hacker
      Jeti->
      KAVAN
      Kontronik->
        Accesorios
      MGM
      Otros
      RIPMAX
      ROI-Import
      Top Model
      YGE
    Brushed
    Program Cards
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Pine wood slat 1.5x3.0x1000 mm
1 x Linden wood slat 2.0x2.0x1000 mm
1 x BALSA trip 2.0x2.0x1000 mm
1 x BALSA trip 6.0x6.0x1000 mm
1 x Pine wood slat 5.0x5.0x1000 mm
1 x Pine wood slat 3.0x7.0x1000 mm
1 x BALSA triangular 10x10x1000 mm
1 x Walnut wood slat 2.0x2.0x1000 mm
1 x BALSA trip 8.0x8.0x1000 mm
1 x Paramotor BackPack XXS (without accessories)
1 x Wing OXY 0,5 pulgadas2
1 x Rescue 1,8m2 / BackPack
1 x MAX pilot ARTF
2 x Ballast 700gr OPALE
1 x Parachute BACKUP X100
2 x Para-RC Mix
1 x Aluminum Bayonet / strongal D12 mm / 0.5 m
2 x Para-RC "RC-Evo-Cross" Rescue
1 x Paramotor BackPack XXS 2
1 x Paramotor Trike XL
2 x Para-RC Trike "RC-Bullix"
1 x Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
2 x Parachute P4
1 x Paramotor Kit Camo H1.5/ Ben Red
1 x Windsock Ozone L -1200 mm
1 x Steering arm 16 mm Ø 3 mm
1 x Profile ABS Square 1 x 1000 mm
1 x Rigid coupling brass Ø 2 mm L: 15 mm
1 x Tape GFK 38 mm
1 x Z type of cable coupler Ø 2 (2 uds)
3 x LUCAS pilot ARTF
2 x Trike XL motor set (motor+esc+prop)
3 x Prop Shaft Adapter 8 mm/M12 "long"
1 x Recessed MPX connector support (6 pcs)
1 x 3.17 mm Prop Adapter CN-Spinner
1 x Angle support XT60 conector
1 x Support pump Xicoy X45
1 x Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x ABS tube 16.0x14.0x1000 mm
1 x ABS tube 5.0x4.0x156 mm
1 x Carbon fibre tube -TAPERED- 3k-PW (10 x 5 x 0.3) x 880 mm
2 x T-Motor MN705-S Kv125 (pack 2 uds)
1 x 3,2 mm Prop Adapter M8
1 x Support XT60 conector (2 pcs)
1 x Support pumb/filter Xicoy X45
1 x 6 mm Prop Adapter M8
1 x 2.3 mm Adapter for 30 mm spinners
1 x Parachute PV6 for F3J
1 x Windsock Ozone L - 700 mm
1 x Wing OXY 5,0 m2
1 x Motor A2212/13T
2 x Set cintas unión paracaídas 145 cm
1 x Squared carbon wing joinner 5x5x220 mm
1 x Xplorer3 anemometro
1 x 10 mm Prop Adapter M12
1 x R6106 HF 2,4 GHz receiver
1 x Allen wheel collar M3x5
1 x FA27.2×8.9 Prop-2PCS/PAIR
1 x Aluminium wide washer M4 Red (4 pcs)
1 x Carbon tube 3K-PW (L 1000 mm, Ø40 mm, Ø36 mm)
1 x Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm)
1 x Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm)
1 x CF tube (L 1000 mm, Ø1 mm, Ø0,5 mm)
1 x AXI 2808/24 V2
1 x Support Flush MPX Conector (6 pcs)
1 x Aro pasacable Ø20 mm (4 pcs)
1 x Xplorer2 anemometro
1 x 48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x Aceite DELUXE turbine Jet Oil 1 litro
1 x 120x60 mm SLH KOVO wheel
1 x Adapter 3,0 mm M6
1 x Adapter 5,0 mm M6 for spinner 40 mm fixed propeller
1 x Motor B40 10L + MAXON 4,4:1 Keramik
1 x Adapter 5,0 mm M8
1 x Adapter 3,2 mm M6
1 x 5 mm Prop Adapter M6
1 x 4 mm Prop Adapter CN-Spinner
1 x Motor A50-14L Turnado V3 Glider
1 x Backmountset complete A40
1 x WINGO 2 PNP
1 x Axle for motor A20-S (3 uds)
1 x Red aluminium servo arm V1-Futaba 17 mm M2
1 x Rudder 2_Tray 4~4.5 inch
1 x Red aluminium servo arm V1-Futaba 1,25" inch M3
1 x Blue aluminium servo arm V1-Hitec 1,0" inch M2
1 x Receiver bed (Blue)
1 x Aluminium wide washer M3 blue (4 pcs)
1 x Red aluminium servo arm V1-Futaba 1,5" inch M3
1 x Servo Mount S (red)
1 x Red aluminium servo arm V1-Futaba 15 mm iM2
1 x Blue aluminium servo arm V1-Hitec 1,5" inch M3
1 x Marker ties (20 pcs)
1 x Kit hydraulic brake
1 x Carbon fiber rod 0.5 mmx1000 mm
1 x Hard brass tubing (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm)
1 x Hard brass tubing (L 1000 mm, Ø11.0 mm, Ø10.0 mm)
1 x Carbon tube 3K-PW (L 2000 mm, Ø25 mm, Ø22.5 mm)
1 x Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm)
1 x CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
1 x CF tube (L 1000 mm Ø030 mm, Ø26 mm)
1 x Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø27 mm)
1 x Hard brass tubing (L 1000 mm, Ø14.0 mm, Ø12.0 mm)
1 x Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø26 mm)
1 x Carbon/kevlar tube 3K-PW (L 1500 mm, Ø25 mm, Ø22.5 mm)
1 x Thinwall Stainless Steel Tubing 28x0.6x1000 mm
1 x Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø36 mm)
1 x CF tube set (Ø 38 mm y Ø 14 mm)
1 x Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x Hard brass tubing (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x Carbon tube 3K-PW (L 2000 mm, Ø20 mm, Ø18 mm)
1 x Carbon tube 3K-PW (L 2000 mm, Ø12 mm, Ø10 mm)
1 x Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm)
1 x Hard brass tubing (L 1000 mm, Ø13.0 mm, Ø12.0 mm)
1 x Fiberglass tube 6/4x1000mm
1 x Hard brass tubing (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm)
1 x Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm)
1 x Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø7.1 m)
1 x Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm)
1 x Carbon tube 3K-PW (L 2000 mm, Ø14 mm, Ø12 mm)
1 x Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm)
1 x Hard brass tubing (L 1000 mm, Ø10.0 mm, Ø9.1 mm)
1 x Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm)
1 x 3.2 mm Prop Adapter M8
10,138.15EUR
Manufacturers
Manufacturer Info
KontroniK
KontroniK Homepage
Other products
Languages
Español English
Currencies