1,800.00EUR

Motor SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Comentarios
Aceptamos
Búsqueda Rápida
 
Use palabras clave para encontrar el producto que busca.
Búsqueda Avanzada
1 x Para-RC Trike "RC-Bullix"
1 x Paramotor BackPack XXS 2
1 x Kwik link negro largo (10 pcs)
1 x Tubo Pitot para PIXHAWK
1 x Pasacables rectangular 40x15 mm (4 pcs)
1 x Varilla acero Ø 8,0 mm x 1000 mm
1 x Terminales de mando o arriostrado aluminio rojo M3, 4 mm (4 pcs)
1 x Rótula M3
1 x Cable servo PREMIUM 1 m (blanco/rojo/azul)
1 x Bisagra 25 mm reforzada
1 x Cartuchos de humo AX-60 negro (5 pcs)
1 x Tubo aluminio (L 1000 mm, Ø7,0 mm, Ø6,1 mm)
2 x Bancada servo gancho
1 x Bisagra pin 39x20 mm (10 uds)
2 x Varilla ABS 3,0x1000 mm
2 x Varilla ABS 5,0x1000 mm
1 x Soporte para cables L 10 mm (6 pcs)
1 x Conexion PREMIUM MAXI fuselaje/alas 200 cm one4one
1 x Tubo ABS 5,0x3,0x1000 mm
1 x Cable servo PREMIUM 10m (blanco/rojo/azul)
1 x Tubo ABS 8,0x7,0x1000 mm
1 x Rótula metálica M3/3 azul (2 pcs)
1 x Rótula V1 larga M2/M1,6 3Diam negra (2 pcs)
1 x Rótula larga M2 con bola/tornillo (6 uds)
1 x Bisagra correa de latón en miniatura 1m
1 x Prolongador servo 15cm MULTIPLEX
1 x Tubo ABS 18,0x16,0x1000 mm
1 x Prolongador 30 cm (Futaba)
1 x Funda Protectora cables Ø 10 mm 1000 mm
1 x Prolongador servo 20 cm HITEC/JR
1 x Bisagra larga con pin metalico (12 uds)
1 x Prolongador 90 cm (Futaba)
1 x Instrumentos individuales 1/4 Planeador
2 x Gancho de lanzamiento fijo
1 x Bisagra de Flaps (6 uds)
1 x PCARD sistema wireless
1 x Prolongador silicona 10 cm (Futaba)
2 x Varilla carbono 5.0 mmx1000 mm
1 x Conector MULTIPLEX hembra 30 cm
1 x Conector XT-30 (macho)
1 x Conector AS150 7mm antichispazo (Set: 2 pares)
1 x Plancha de balsa 2,5x100x1000 mm
1 x Plancha contrachapado Abedul 600x300x0,8 mm
1 x Cinta fibra Carbono 125 g/m², 3k, UD (100 mm) roll/ 50 m
1 x Manta bolsa de vacio 150 gr/m2 Bobina 20m
1 x Adaptador 2 LiPos XH>EH
1 x Cable "Y" equilibrador 6S, 2x JST-XH / 1x JST-EH
1 x Interruptor magnetico para DPSI RV Family
2 x Plancha ABS 500 x 400 x 1,5 mm (blanco)
1 x Manta bolsa de vacio 150 gr/m2 Bobina 50m
1 x CC 05
1 x Fibra carbono tela 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x AIREX® M060 lámina (amarilla) 1200x550x2,0 mm (20 pcs)
1 x Fibra carbono tela 160g/m2 100 cm x 3 m
1 x Conexion PREMIUM fuselaje/alas para 3 servos SUB-D 160 cm
1 x AIREX® M060 lámina (amarilla) 1200x550x2,0 mm (10 pcs)
1 x Fibra carbono tela 245g/m2 127 cm x 10m
1 x DPSI Ampere battery backer
2 x Fibra carbono TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m
1 x Adaptador 5 LiPos XH>EH
1 x CC 02
2 x Futaba CGY760R - Gyro+Receiver+Governor con Progm. GPB-1
1 x Sistema de arranque a bordo (9525)
1 x Encendido glow remoto más set para montaje interior
1 x Autoarranque EME35
1 x Encendido GLOW 9C + accesorios
1 x Encendido GLOW 2C + accesorios
1 x Interruptor OPTO Gas Engine
1 x Soporte antivibración encendido V2 Rojo
1 x Kit de conversión HIROBO EX/EAGLE elektro
1 x La Capitania di Venetia 1:50
1 x Acorazado Tirpiz 1:200
2 x Varilla ABS 4,0x1000 mm
1 x Liston ABS 1,5x8,0x1000 mm
1 x Gancho remolque inferior plano
1 x Led (azul - 2 pcs)
1 x Led Flash (naranja - 2 pcs)
1 x Base para servo
1 x Cable conexión RX
1 x Liston ABS 1,0x2,0x1000 mm
1 x Varilla ABS 1,25x1000 mm
1 x Liston ABS 1,5x6,0x1000 mm
1 x Liston ABS 1,5x2,0x1000 mm
1 x Varilla ABS 6,0x1000 mm
1 x Cinta fibra carbono 25 mm 3k 125 g/m2 x 50m
1 x Modulo telemetria 500 mW/100 mw Radio aire/Tierra Modulo 915 MHz
2 x Gancho de remolque hasta 3m
2 x Liston ABS H 2,0x2,0x330 mm
2 x Liston ABS I 3,5x1,75x330 mm
2 x Liston ABS 1,5x4,0x1000 mm
1 x Cable RX externo para recetores estándar
1 x Varilla carbono 0.5 mmx1000 mm
1 x Varilla carbono plana 1000x3.0x0.13 mm
1 x Lipo "Airsoft" 1200 mAh 3S 11.1v 25C T-Plug
1 x Varilla carbono 1.5 mm x 1000 mm
1 x Led (verde - 2 pcs)
1 x Varilla carbono plana 1000x6.0x0.8 mm
1 x Sistema de luces de alta potencia
1 x Varilla carbono 16 mm x 1000 mm
1 x Varilla carbono 20 mmx1000 mm
1 x Varilla carbono 0.8 mmx1000 mm
1 x Varilla carbono plana 1000x3.0x0.5 mm
1 x Led Flash (verde - 2 pcs)
1 x Bayoneta de carbono 13,4 mm Ø 0,48 mm
1 x Led Flash (rojo - 2 pcs)
1 x Varilla carbono 8.0 mmx1000 mm
1 x Luces V3 LED (1x red 1x green 1x white)
1 x Varilla carbono 4.0 mmx1000 mm
1 x Led Flash (azul - 2 pcs)
1 x Led (rojo - 2 pcs)
1 x Bayoneta de carbono cuadrada 5x5x220 mm
1 x Varilla carbono 0.5 mmx1000 mm
1 x Varilla carbono 12 mm x 1000 mm
1 x Varilla carbono 6.0 mmx1000 mm
1 x GPS, Vario y Sensor de altitud SBS-01G
1 x Liston ABS 1,0x3,0x1000 mm
1 x Liston ABS H 1,5x1,5x330 mm
1 x Liston ABS 1,0x4,0x1000 mm
1 x Liston ABS 2.0x8.0x1000 mm
1 x Varilla ABS 1,0x1000 mm
1 x Liston ABS 2.0x3.0x1000 mm
1 x Liston ABS I 20x10x1000 mm
1 x Varilla ABS 1,5x1000 mm
1 x Liston ABS 2.0x5.0x1000 mm
1 x Pegamento Pu R 50g polyuretano
1 x Pegamento FOAM - CURE™ (24g)
1 x ARAMID panel nido de abeja 1300x2600x2 mm
1 x Fibra carbono tela 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x Pegatinas Cierva C30 versión española
1 x Film perforado 100 cm / 20 m
1 x Fibra carbono tela 68 g/m² (Aero, plain weave) 100 cm x 0.5m
1 x Tren de aterrizaje completo
1 x Palanca del cíclico LA500
1 x Parte superior del rotor
1 x Interface REVOLECTRIX USB para CellPRO 10s
1 x Interruptor SWTU2
1 x Conector alas/fuselaje para 6 pines AWG 20-24 (sin pines)
1 x SBEC 40
1 x SBEC Jeti
1 x Cable USB para programación HLS
1 x Interruptor OPTO Gas Engine
1 x PowerBox SparkSwitch RS
1 x Crimpadora
1 x Bascula precisión 0.1- 600 g
1 x Tijera electrica
7,259.55EUR
Fabricantes
Información del Fabricante
Saito
Otros productos
Idiomas
Español English
Monedas