4.50EUR

CA Glue fast 20g
[R1501032]


CA Glue fast 20g
Superglue (fast) is a normal type Cyanoacrylate adhesive with fast setting, high flow abilit, and good penetration characteristics.

It has been specially formulated to achieve the strongest possible bond between well-mated, non-porous surfaces, such as rubber, metals, plastics, glass, etc.

Single-component
Transparent
Very low viscosity, high setting speed
Bonds obtain hand strength after 2-15 seconds
Special bottle*
*A metal needle is fitted in the lid, which is pressed into the opening of the bottle's dosing attachment when it is screwed on. This reliably prevents leakage, drying out and sticking of the opening. The dosing attachment allows a fine dosing of the adhesive.

Physical properties
Liquid state
Base Ethyl Cyanoacrylat
Colour clear
Specific Gravity (at 20 °C) 1.053~1.060
Refraction Index (n 20 D) 1.439
Flash Point (°C) >80 °C
Boiling Point (°C) 65/6mm Hg
Viscosity (cP) 3-5
Cured state
Colour clear
Specific Gravity (at 20 °C) 1.1~1.3
Processing temperature -55 - 80 °C
Refraction Index (n 20 D) 1.49
Dielectric Constant (bei 10 MHz) 3.5
Dielectric Loss (bei 10 MHz) 0.067
Soluble in Acetone, Dimethyl formamide,Nitromethame and Dimethyl sulfoxide.
Bond strength (Tensile shear strength, cured for 24 hours at 20-25 °C)
kg/cm²
Rigid PVC to rigid PVC 40-60
ABS to ABS 50-70
Polycarbonate to polycarbonate 80-120
Polystyrene to polystyrene 30-45
Natural rubber to natural rubber 5-9
Steel to steel 190-210
Stainless steel to stainless steel 200-220
Aluminum to aluminum 160-180
Copper to copper 150-170
Steel to rigid PVC 50-60
Stainless steel to neoprene 5-10
SBR to SBR 5-10
Cure speed
Seconds
ABS to ABS 4-5
Wood to wood 50-60
ABS to stainless steel 5-10
NBR to stainless steel 3-5
NBR to NBR 3-5
Stainless steel to stainless steel 3-5
ABS to NBR 3-5
Wood to ABS 5-10
Storage and shelf life:
Our superglue can be stored in a cool and dark place for about 1 year (for example in the refrigerator at + 5 °C).
At room temperature about 6 months. At temperatures above 20 °C the shelf life is further reduced (e. g. in the summer months)


temporarily out of stock
temporarily out of stock

Reviews

Customers who bought this product also purchased
Extension MPX-MPX 20 cm
Extension MPX-MPX 20 cm

temporarily out of stock
temporarily out of stock

Sparkplug NGK CM6
Sparkplug NGK CM6

temporarily out of stock
temporarily out of stock

TYGON tubo 1 m Diam. 3.4 x 2.0  mm
TYGON tubo 1 m Diam. 3.4 x 2.0 mm

temporarily out of stock
temporarily out of stock

Tygon tube 6.35 - 3.18 mm 1m
Tygon tube 6.35 - 3.18 mm 1m

temporarily out of stock
temporarily out of stock

Propeller MENZ-S 23x8
Propeller MENZ-S 23x8

temporarily out of stock
temporarily out of stock

CA Glue (medium) 20g
CA Glue (medium) 20g

temporarily out of stock
temporarily out of stock

Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
  
  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
    Cianocrylate->
      BSI Cianocrilates
      Cyanocrylate R&G
      KAVAN Ciano
      Yuki Model
    Epoxy->
    Resin/Gelcoat
    Glass Bubbles
    Contact adhesive
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
1 x Small aluminium horn blue (2pcs)
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x Brass control horn M3 short for wire (2 pcs)
2 x Threaded coupler ALU M3 Ø 5 (2 uds)
1 x Horn 5/20 with M2 Bearing
1 x Threaded coupler ALU Left M2,5 Ø 3 (2 uds)
2 x 6 mm red aluminium threaded horn with patella
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x Cable with accesories
1 x Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
1 x TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
1 x Horn 6/20 with M3 Bearing
1 x Cable control set
1 x Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m
1 x Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m
1 x Carbon fibre sleeve 12k 170 mm x 5m
2 x Horn 5/15 with M2 Bearing
1 x Brass control horn M4 short for wire (10pcs)
2 x 6 mm aluminium horn with patella
1 x Brass control horn M4 short for wire (4 pcs)
1 x Horn 6/27 with M3 Bearing
1 x Carbon Non-Woven, 160 g/m² 127 cm 5m
1 x Threaded coupler ALU M3 Ø 4 (2 uds)
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x Fibra carbono 3k tela 160g/m2 100 cm x 5m
1 x Horn 16,5x20 mm (2 pcs)
1 x Horn 6/35 with M3 Bearing
1 x Small aluminium horn red (2pcs)
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x Carbon Non-Woven, 160 g/m² 100 cm 25 m
1 x Demoulding wedge red (40 x 20 mm) 5 pcs
1 x Connectors banna oro 8,0 mm 5 pcs(Female)
1 x Connectors banna gold 5,5 mm (M/F)
2 x Conector Servo female 4 pines
3 x 2 mm female connector (2 pcs) with safety connector
3 x XH female balance (2S) connector (2 pcs)
1 x EC5-Set male, simple quality, 2 x female pin, 1 x blue housing
2 x XH male balance (3S) connector (2 pcs)
1 x Optotronix Aurora Plug
1 x 30 cm DEANS female connector
4 x Connectors DEANS (T)
3 x Connectors banna oro 3 mm (M/F)
4 x Connector CAN 15
1 x Wing connector 8pin with pin strip, plug & socket
1 x Connectors DEANS 4 pins (1 pair)
2 x EC5-Set female, simple quality, 2 x female pin, 1 x blue housing
2 x Connectors banna oro 3,5 mm (M/F)
1 x CF tube set (Ø 38 mm y Ø 14 mm)
1 x Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm)
1 x Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x ABS tube 7.0x5.0x1000 mm
1 x Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm)
1 x CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
1 x Canopy Lock V1 M3 Blue (2 pcs)
1 x Steering arm 16 mm Ø 4 mm (2 uds)
1 x Cockpit plastic closing
2 x Cierre cabina aluminio Ø5, I=16 mm
1 x Locking cable tie 3.2x142 (uds)
1 x Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x Crimping sleeves for cable 0.85 mm (10 pcs)
1 x Screw-lock connector M2 (2 uds)
1 x Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x Steering arm 12 mm Ø 3 mm (2 uds)
1 x Crimping sleeves for cable 1.3 mm (10 pcs)
1 x Covered closure or fairings
1 x Steering arm 16 mm Ø 3 mm
1 x Ferrita con funda
1 x Ferrita 27x14x7 mm
1 x Ferrita 14x8x5.5 mm
1 x 1/10 Pilot "Jimmy"
2 x Civilian pilot "G-Man" size 9cm (Slimline)
1 x Oracover CARBON Metalic 1 m
1 x Oratex White 2m
1 x M2 5Diam black ball link V2 (2 pcs)
1 x ABS I Strip 20x10x1000 mm
1 x Nitroverdu 500 ml
1 x Balsa panel 1.0x100x1000 mm
1 x Surface Indicator Gauge Small
1 x Neck strap Double V2
1 x Black 2,4 GHz antenna exit guides (2 pcs)
1 x Switch Cap L (black)
1 x Transmitter Balancer HITEC Aurora 9, JR and Spectrum (blue)
1 x Battery FUTABA 18MZ
1 x Switch Cap M (red)
1 x Rudder forward 90x28 "type Kato"
2 x Red 3m5 mm connector holder
1 x Rudder forward 70x28 "type Kato"
2 x XH male balance (6S) connector (2 pcs)
1 x Threaded coupler ALU M2,5 Ø 6 (2 uds)
2 x Banna gold connector 2,5 mm (M/F)
1 x Micro control horn (2 pcs)
1 x Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm
3 x 2 mm male connector (2 pcs) with safety connector
1 x Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch
3 x MPX Support
1 x Long adjustable aluminium control horn with bearing 2,8x15
1 x 6 mm M3 variable horn
1 x Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x 6 mm M3 variable inclined horn
1 x RH long aluminium horn (2pcs)
2 x MR30 connector male
1 x Micro control horn T2 Ø 1
1 x MPX PCB "Gender-Changer (5 pcs)
1 x Protector Connector Dean-T (1 pair)
1 x Brass control horn M2 long for wire (10pcs)
2 x Soporte carbono MR30 (2 pcs)
1 x 5 mm M2 variable horn
2 x Connectors MPX male
1 x Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm
1 x Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 m
1 x Extra long horn 60x30
1 x Motor OS 3820-1200 electric
1 x Mounting frame MPX female connector
1 x Soldering PCBs 8pin, 5 pieces
3 x XT-60 connector (male)
1 x Mounting frame MPX male connector
1 x Pilot JAN 1/4 Saiplanes
1 x 11 mm Rubber pads (14 pcs)
1 x Cable grommet Ø 4 mm (4 uds)
1 x 1/6 Pilot "Tony"
1 x Fabric scissors curved (offset handles), 16 cm / 6" length
2 x Cierva C30 Elevator
1 x Head lower part
1 x XH 30 cm Male extension 0,25 mm2 silicone cable for 4 cell
1 x Black spiral protective cover for wires Ø 0,5/50 mm - 25 m
1 x XH 30 cm Male extension 0,25 mm2 silicone cable for 2 cell
1 x XH 30 cm Male extension 0,25 mm2 silicone cable for 5 cell
1 x AddCAP 10AS capacitors
1 x DUPLEX 2.4EX Central Box 220
1 x PPM to Jack link - Tx Black (mono) DC/DS Tx DUPLEX 2,4EX
1 x Allen wheel collar M3x5
1 x 100 mm rods + T patellas set for direction control
1 x Clip mini fixing for wing (2 pcs)
1 x 140 mm rods + T patellas set for direction control
1 x Cable grommet 9.5 mm (4 uds)
1 x Allen wheel collar M3x3
1 x Aluminun wheel collar 5 mm Ø (4 uds)
1 x Spinner Alumin. fixed propeller 30 mm / 2,3 mm
1 x Spinner NUT M6
2 x Spinner Alumin. fixed propeller 40 mm / 5,0 mm
1 x Transmitter Stick Ends V1 Silver - M3 (2 pcs)
1 x Actuador lineal HLS12-100210-7.4v
1 x Spinner NUT M6
1 x Spinner NUT M5
1 x Spinner Alumin. fixed propeller 30 mm / 3,2 mm
1 x Spinner Alumin. fixed propeller 40 mm / 3,0 mm
2 x Spinner NUT 1/4x28
1 x Three-function control switch by FUTABA
1 x Transmitter Stick Ends V5 Blue - M3 Futaba/Hitec/Spektrum DX8 (2
1 x FPV Station for SE TX-Tray V1
1 x Transmitter Stick Ends V5 Blue - M4 JR/DX7
1 x Transmitter Stick Ends V5 Rojo - M3 Futaba/Hitec/Spektrum DX8 (2
2 x MR30 connector female
1 x XH female balance (8S) connector (2 pcs)
1 x XH female balance (5S) connector (2 pcs)
1 x XH female balance (3S) connector (2 pcs)
2 x XT-60 connector (female)
1 x XH male balance (2S) connector (2 pcs)
1 x XH female balance (9S) connector (2 pcs)
2 x XH female balance (6S) connector (2 pcs)
1 x Skies 2x 335 mm + 1x Esqui 250mm
2 x XH female balance (4S) connector (2 pcs)
2 x Connectors MPX black male
3 x Connectors MPX male (PIN double)
1 x ABS Strip 1.0x5.0x1000 mm
1 x Blue aluminium servo arm V1-Hitec 1,25" inch M3
2 x Kontronik connector (10 connectors, 5 pairs)
2 x 30 cm MULTIPLEX female connector
1 x Aluminium wide washer M3 red (4 pcs)
1 x Red aluminium servo arm V1-Futaba 23 mm M2
1 x BlueCom™ Adapter (iOS)
1 x 50m servo "Premium" wire (white/red/blue)
1 x PYRO 700-45
2 x Piloto Jet "Red" 1/6 Scale
1 x Motor Advance 30-10 F3A
1 x KIRA 600-20 6,7:1
1 x 1,5x50 mm allen screwdriver
1 x Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC
1 x PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs)
1 x 1/10 Pilot "Jack"
1 x 1/12 Pilot "Tom"
1 x Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) knurled
1 x DUPLEX 2.4EX RC Power Switch 10
1 x Raer wall
1 x Battery RX JETI LiIon RB 2600 7.2v
1 x Wheel collar 4 mm Ø (4 uds)
1 x Conector XT-30 (macho)
1 x Conector XT-30 (hembra)
1 x Connectors DEANS (T) micro
1 x Connectors MPX black female
1 x XH male balance (4S) connector (2 pcs)
1 x XH male balance (5S) connector (2 pcs)
1 x XH male balance (9S) connector (2 pcs)
1 x XH male balance (7S) connector (2 pcs)
1 x XH male balance (8S) connector (2 pcs)
1 x Connectors banna oro 2 mm (M/F)
1 x Bag connector 2 mm
1 x MPX Sub-D Adaptor
1 x ABS Strip 1.0x4.0x1000 mm
1 x ABS tube 2.0x1.0x1000 mm
1 x ABS Strip 1.5x6.0x1000 mm
1 x ABS "T" angle 4.0x4.0x1000 mm
1 x Combo AM480 T-Motor 650 Kv
1 x Connectors banna oro 4 mm (M/F)
1 x Connectors banna oro 4 mm (M/F) (ultralight)
1 x Connectors banna oro 0,8 mm (M/F)
1 x Hard brass tubing (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x 290 mm M4/M4 6.0x4.0 mm shaft ship
1 x Servo Connector Brackets (10 pcs)
1 x Connectors banna oro 8,0 mm (M/F)
1 x Aluminium wide washer M4 Gold (4 pcs)
1 x MPX PCB "4 Pins", 5 pieces
1 x Conector MR-60 (pareja)
1 x Red aluminium servo arm V1-Futaba 15 mm iM2
1 x KIRA 480-38
1 x KIRA 400-27
2 x Pilot "Anthony" (Slimline)
1 x Motor Advance 50-6
1 x Conector JR Servo male (50 pcs)
1 x 1/6 Pilot "Garry"
1 x Copier 5x20 cm pcs
1 x KIRA 500-30 6,7:1
1 x Motor HP 220/30/A3 P4 5:1
1 x Motor ORBIT 20-12 with coolingfan
2 x Pilot "Adolf" Legends Series (Slimline)
2 x Piloto RC Civil 1/5- 1/6 Scale 12"
1 x KIRA 600-17
1 x Militarian pilot "Kamikaze" size 9cm (Slimline)
1 x Civilian pilot "Pamela" size 9cm (Slimline)
1 x Cockpit aluminium closing 4.7g
1 x Fully Threaded Steel Rod Duralumin 120 mm M3 (2 pcs)
1 x 1/4 Pilot "Heidi"
1 x 1/4 Pilot "Mike"
1 x Tachometer Hyperion Multi-pala
1 x Welder 100W/200V
1 x Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs)
1 x Aramid fibre shears Proton®, 21 cm / 8" length
1 x Blade holder lower
1 x Balls 4 mm
1 x Steering lever
1 x Servo Fork
1 x Cierva C30 simulated motor
1 x Head core
1 x Head lower part New
1 x 460 mm EPP Floats
1 x Steering arm 12 mm Ø 4 mm
1 x Wheel collar 3.5 mm Ø (4 uds)
1 x Wing bolts M6 Steel screw Blue (2 pcs)
1 x 1/12 Pilot "Langley"
1 x Spinner Alumin. fixed propeller 40 mm / 4,0 mm
1 x Spinner 50 mm White (Kavan)
1 x Spinner NUT M10x1
1 x Wheel keeper washer
1 x Spinner NUT M4
9,675.90EUR
Manufacturers
Manufacturer Info
R-G.de
R-G.de Homepage
Other products
Languages
Español English
Currencies