249.01EUR

VBar NEO VLink 6.x Express, neon-yellow
[MIK5131]


VBar NEO VLink 6.x Express, neon-yellow
VBar NEO with built-in VLink receiver, with 6.x Express Software
Our new VBar platform is called NEO and is the sucessor of both VBar Mini and VBar Silverline. It contains latest sensor technology and top processing power.
The size of the VBar NEO is slightly bigger than the VBar Mini, but it provides the connectivity of a Silverline. If features 9 fully usable servo outputs, a rpm sensor input, a connector for an external sensor, two telemetry ports, and an integrated USB port.
The main advantage is the sensor array that contains two different multi axis sensors, which provide best performance even on high vibration loads by working together. The power supply has been hardened against spikes from servos that have insufficient internal filtering of their own glitches.
VBar NEO will come with the Express configuration. It has much more features as the current Express version, i.e. it contains the electirc governor already. So it fits the basic needs to be used with VBar Control.
Pro configuration contains extended parameter access.
With VBar Control, Pro also provides access to Macrocells. Macrocells are a new type of programming complex functionality specially for bigger and more complex models.
Pro implicitely includes the VPlane firmware license for fixed wing models, which can be used with VBar Control exclusively.
The top configuration is Pro Rescue, which adds the Rescue feature to the Pro version.
To use all the new features, an update of the VBar Control is required. It is now available. The update is fully backwards compatible, so all current devices can be used without change.
Even Express contains a updated 6.x control loop, that contains a special anti ballooning facility to provide a better stability at high speed, as well as much improoved performace at flying with very low rpm. The violent ballonig effect on the edge at high speed is almost gone!
You find detailed instructions how to proceed with VBar NEO. New Apps are described in the VBar Control User Manual. All updates will be performed with the VBar Control Manager. The Changelog shows all changes in detail.

Specifications
Dimensions 45,5 x 25,6 x 16 mm / 1,79 x 1,01 x 0,63 in
Weight 25,3g / 0,85oz
Supply Voltage 3,5 - 8,4 V (2S Lipo)

Content
USB cable Mini USB cable
Patch cable Boot Plug, Patch cable
mounting pad Gyro pad 10 x 50 x 1,2 mm
Gyrosensor Internal multi-axis sensor array, additional 3 axis sensor can be connected (not included)
Manual Printed manual (Quick-Start-Guide, full manual available online on www.vstabi.info)
Software Current 6.x Express Software with Electric Governor and Bank Switching Miscellaneous
Hardware Requirements VBar Control Radio
Availbale software upgrades PRO Software, PRO Software with Rescue function (purchase via App Store on www.vstabi.info). With these updates, you also get the VPlane and VCopter firmware which you can use with VBar Control.


Comentarios
Aceptamos
Búsqueda Rápida
 
Use palabras clave para encontrar el producto que busca.
Búsqueda Avanzada
1 x Conector banana oro 2,5 mm (100 parejas)
1 x Medidor de incidencias
2 x Conector equilibrado XH (5S) macho (2 pcs)
1 x Conector banana oro 8,0 mm
1 x Medidor angulos tamaño pequeño
1 x Catapulta Vasa model
1 x Conector banana oro 4 mm antichispa
1 x Conector banana oro 8,0 mm. 5 pcs (macho)
1 x Soporte para aviones SebArt
1 x Conector banana oro 4 mm
1 x Soporte para aviones
1 x Conector banana oro 8,0 mm 5 pcs (hembra)
2 x Conector equilibrado XH (3S) macho (2 pcs)
1 x Conector DEANS 4 pines (1 par)
1 x Conector Servo hembra 4 pines
2 x Conector equilibrado XH (3S) hembra (2 pcs)
2 x Conector DEANS (T)
1 x Conector AS150 7mm antichispazo (Set: 2 pares)
1 x Conector banana oro 4 mm (Ultralight)
1 x Conector banana oro 0,8 mm
2 x Conector banana oro 2 mm (Ultralight)
1 x Adaptador Sub-d conector MPX
1 x Conector banana oro 2 mm
1 x Conector equilibrado XH (2S) macho (2 pcs)
2 x Conector equilibrado XH (2S) hembra (2 pcs)
1 x Medidor ángulos
1 x Carro remolque para veleros 720 x 285 mm
1 x DUPLEX 2.4EX Central Box 210
1 x Barniz Tensor 1000 ml
1 x Acople ALU M3 Ø 5 (2 uds)
1 x Perfil Acero Inox. 6.3x3.5x1000 mm
1 x Freno de rueda para ruedas de 140 mm de diámetro
1 x Cable acero trenzado Ø 0,52 mm - 15 kp (10 m)
1 x Anclaje cabina de soporte horizontal "tipo F3A" (2 pcs)
1 x Conector XT-30 (macho)
3 x Prolongador LiPos XH>XH
4 x Soportes conector servo (10 pcs)
2 x Conector equilibrado XH (5S) hembra (2 pcs)
3 x Soporte rojo para conectores de 3,5 mm
1 x Conector XT60 macho empotrar (2 pcs)
1 x Conector banana oro 6,0 mm Ultralight (pareja)
1 x Ball Link ALU M3 - RH (1 pcs)
2 x Tapon 22 mm con espiga (Electron)
1 x Tren aterrizaje Electrico BULL Mo1 2.6 GS-200 (Electron Retracs
1 x Tren aterrizaje Electrico "Black Edition" ULTIMATUM 2.0 (Electro
1 x Tren aterrizaje Electrico ODYSSEY (Electron Retracs)
1 x RB-45 Electronica
1 x Manual Controller
1 x Rueda 75 mm con electrofreno (2 uds)
2 x Rueda de morro 62 mm
1 x Cable freno retractil
1 x Tren aterrizaje Electrico PC-21 Skymaster (Electron Retracs)
1 x Tren aterrizaje Electrico "Black Edition" BULL Mo1 2.6 (Electron
1 x ER-50eVo Set A [2x ER50 + RB-45]
1 x Conector banana oro 3,5 mm
1 x Conector BEC macho (10 pcs)
2 x Batería Sanyo Eneloop AA 1,2 V 2000 mAh
1 x Batería Sanyo Eneloop TX 9,6 V 2500 mAh
1 x Batería Sanyo Eneloop RX 6,0 V Futaba
1 x Batería Sanyo Eneloop RX 6,0 V JR
1 x Batería Sanyo Eneloop RX 4,8 V JR
1 x Batería Sanyo Eneloop RX 4,8 V Futaba
1 x Batería Sanyo Eneloop TX 9,6 V Hitec
1 x Cinta fibra carbono 25 mm 3k 125 g/m2 x 10m
1 x Plancha ABS 500 x 400 x 2,0 mm (blanco)
1 x Fibra carbono tela 160g/m2 100 cm x 2 m
1 x Placa kit MPX 8 pines con conector macho/hembra
1 x Conexión alas 2 servos Futaba 50 cm
2 x Protector Conector Dean-T (1 pareja)
1 x Conector MULTIPLEX hembra 30 cm
1 x Conector XT-60 (macho)
1 x Pletina MPX 6 pines (5 uds)
1 x Fundas para el transporte F3A alas
1 x Avanti XS 1.8m Jet FREECE TRICOLORI (SebArt)
1 x Avanti S Jet, Tubo salida para JetCat P-140 (SebArt)
1 x Suncover 100cc Red
1 x Conector equilibrado XH (8S) hembra (2 pcs)
1 x Conector XT-150 6mm (Set: 5 pares)
1 x Conector equilibrado XH (7S) hembra (2 pcs)
1 x Conector Centralita Optotronix Aurora
1 x Conector ala MPX 8 pines con conector M/H
1 x Conector MR30 (macho)
1 x Conexión alas 2 servos JR/Graupner 50 cm
1 x Conectores Kontronik (10 conectores, 5 pares)
1 x Conector XT-30 (hembra)
2 x PIN Conector hembra (100 pcs)
2 x Conector MR30 (hembra)
1 x Conector equilibrado XH (4S) hembra (2 pcs)
1 x Conector equilibrado XH (6S) macho (2 pcs)
1 x Funda conector 2 mm
2 x Soporte carbono MR30 (2 pcs)
2 x Conector XT-90 (pareja)
2 x Conector XT-30 (pareja)
1 x Conector equilibrado XH (8S) macho (2 pcs)
1 x Soporte conector MPX (4 pcs)
1 x Soporte de seguridad conector MPX (4 pcs)
2 x Soporte conector MPX
1 x Soporte de seguridad MPX (5 pcs)
1 x Protector Conector MPX (1 pareja)
1 x Soporte conector MPX macho (6 pcs)
1 x Conector equilibrado XH (7S) macho (2 pcs)
1 x Conector MT-60 (pareja)
1 x Pletina MPX 4 pines (5 uds)
1 x Pletina MPX 8 pines (5 uds)
3 x Conector XT-60 (hembra)
2 x Soporte rojo para conectores de 4 mm
1 x Soporte conector MPX (2 pcs)
1 x Conector MPX negro macho
1 x Conector MR-60 (pareja)
1 x Contacto macho pin conector (10 pcs)
1 x Plancha aluminio 500x250x0.5 mm
1 x AIREX® M060 lámina (amarilla) 1200x550x2,0 mm (10 pcs)
1 x Sensor RPM Optico para Dinamometro
1 x Avanti S 2,3m Jet AMARILLO/NEGRO (SebArt)
1 x Avanti XS Jet, Deposito Keroseno (SebArt
1 x Tren retractil electrico AVANTI XS 1.9m
1 x Hopper UAT Sebar 600 ml
1 x Set de 7 Servos de 9g DS MG + cable alargador para Avanti Mini
1 x Avanti S Jet, Tubo salida vectorial para JetCat P-180
1 x Avanti XS 1.8m Jet FREECE TRICOLORI (SebArt)
1 x Servo SAVOX SH 0257 MG
1 x Tren delantero 155 mm con rueda 70 mm
1 x Brazo servo aluminio 1.25/1.5" Futaba/MKS/Savox
1 x Servo SAVOX SA-1256 TG
2 x Servo SAVOX SW-1250 MG digi
1 x Avanti XS Jet, Tubo salida para JetCat P-60/P-100 (SebArt
1 x F-104 Starfighter USAF (SebArt)
1 x Tren delantero 155 mm con rueda 70 mm
1 x Tren aterrizaje Electrico ODYSSEY + GS200 (Electron Retracs)
1 x Tren aterrizaje Electrico "Black Edition" BULL Mo1 2.6 GS200 (El
1 x Tren aterrizaje Electrico BULL Mo1 2.6 (Electron Retracs)
1 x Brazo servo aluminio 20-25 mm Futaba/MKS/Savox
1 x Actuador electrico 25 mm
1 x Fibra vidrio trenzada "manga" 45 mm x 10m
1 x Cinta fibra de vidrio 130 g / m² (Silane, liso) 25 mm, 50m
1 x Plancha fibra vidrio 620x540x3,2 mm
1 x Fibra de vidrio 25 g (2 m²)
1 x Plancha fibra vidrio 350x150x0.3 mm
1 x Cinta fibra de vidrio 225g / m² (Silane, liso) 30 mm, 100m
1 x Fibra de vidrio 49 g/m² (1,27 x 5m)
1 x Plancha fibra vidrio 350x150x2.5 mm
1 x Cinta fibra de vidrio 225g / m² (Silane, liso) 40 mm, 100m
1 x Malla PVC cuadrada 290x185x0,32 mm
1 x Plancha de goma espuma (310x210x3 mm)
1 x Peel Ply liso 64 g/m2 150 cm x 10 m
1 x Cinta fibra de vidrio 130 g / m² (Silane, liso) 25 mm, 100m
1 x Junta selladora, Tacky Tape Gris 2.75mmx12mmx15m
1 x Adaptador de hélice 2,3 mm M6
1 x PHASOR RACE 2035/2100 2D
1 x Fibra vidrio 80g/m2 (100cm x 20m) plain Aero Finish
1 x Fibra vidrio 163 g/m² 130cmx10m (Interglas 92105, aero, finish
1 x Fibra vidrio 160 g/m2 "twill weave" (5 m x 1 m)
1 x Plancha fibra vidrio 350x150x4.0 mm
1 x Plancha de goma espuma (310x210x2 mm)
1 x Peel Ply liso 95 g/m2 20 mm x 100 m
1 x Fibra vidrio 80g/m2 (100cm x 20m) cruzada
1 x Manga de fibra de vidrio Ø 20 mm x 10m
1 x Fibra vidrio 25g 110 cm/ 20m (Interglass 02034, finish FE800 pl
1 x Fibra de vidrio 49 g/m² (1,10 x 20m)
1 x Plancha de goma espuma (310x210x5 mm)
1 x Peel Ply liso 95 g/m2 100 mm x 100 m
1 x Fibra vidrio 5000x1100 mm 49 g/m²
1 x Fibra de vidrio 80 g/m² (10 m x 100 cm)
1 x Fibra Vidrio 390 g/m² Aero (10m x 1m)
1 x Plancha fibra vidrio 620x540x2,0 mm
1 x Cinta fibra de vidrio 225g / m² (Silane, liso) 40 mm, 50m
1 x Adaptador MPX-EC3 10cm
1 x Servo SAVOX SH 1250 MG digi
1 x Servo SAVOX SC-1267 SG
1 x Servo SAVOX SB-2290 SG
1 x Servo SAVOX SH 1290 MG digi
1 x Piñones SAVOX SH-0350
1 x Bancada servo SAVOX SV-1260MG
1 x Servo SAVOX SV-0236 MG HV
1 x Servo SAVOX SA-1258 TG
1 x PHASOR RACE 2035/4100 1D
22,802.76EUR
Fabricantes
Información del Fabricante
Mikado
Mikado Página Principal
Otros productos
Idiomas
Español English
Monedas