1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x 800TVL CMOS camera for FPV
1 x USB Mini Camera endoscope
1 x Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
1 x Motor A2212/13T
1 x Threaded coupler ALU M2,5 Ø 6 (2 uds)
2 x Crimping sleeves for 1.1 mm cable (10 pcs)
1 x Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
2 x Ball link V1 Ø7 M4/3 (6 uds)
1 x Threaded coupler M3 (10 uds)
2 x Ball link duraluminium M3 V1 (10 pcs)
1 x Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x Threaded coupler ALU M3 Ø 4 (2 uds)
1 x Kwik link AL M3 con Clip (2 pcs)
1 x Threaded coupler ALU M3 Ø 6 (2 uds)
1 x Brass ball links BS M3 V1 (10 pcs)
1 x Z type of cable coupler Ø 1.8 (2 uds)
1 x Aluminium blue ball links M3 V1 (10 pcs)
2 x Aluminium coupler M3/2 with ball bearing (1 pcs)
1 x Threaded coupler ALU M2,5 Ø 4 (2 uds)
2 x Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x Xplorer4 anemometro
1 x Xplorer3 anemometro
2 x Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
1 x ABS I Strip 10x5x1000 mm
1 x Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
1 x Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m
2 x Strip 3,5x1,75x330 mm
1 x Strip 1,5x1,5x330 mm
1 x Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p
1 x Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
2 x Strip ABS 2.0x8.0x1000 mm
2 x Round Rod 2,5x1000 mm
1 x ABS I Strip 20x10x1000 mm
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x Round Rod 2,0x1000 mm
1 x ABS Strip 1.0x2.0x1000 mm
1 x Carbon fibre sleeve 12k 170 mm x 5m
1 x Vacuum bag, 1200 mm x 50 m
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x Carbon Non-Woven, 160 g/m² 127 cm 5m
1 x Carbon Non-Woven, 160 g/m² 127 cm 1 m
1 x Pine wood slat 2.0x10.0x1000 mm
1 x 2 mm male connector (2 pcs) with safety connector
1 x Piloto JET 1:3,5
1 x Spray adhesive INFUTAC (Clear) 500 ml
1 x 25 mm reinforced hinge
1 x 30 cm BEC cable (male)
1 x "S" set for planes
1 x Carbon plate 350x150x3.0 mm
1 x Stainless steel 4 m Pull-Pull complet set (max 20 kg)
1 x ABS Strip 1.5x4.0x1000 mm
1 x Styrene plate 320x120x1.0 mm
2 x Foam plastic plates (310x210x5 mm)
1 x Thermoforming sheet 0.3mm (0.039in) DIN A4
1 x Blades 330mm
1 x Turnbuckle M2x29/43 (2pcs)
1 x Kwik link AL M4 con Clip (2 pcs)
1 x TS832 to Gopro AV/Power Cable DJI Phantom 2 Compatible
1 x Cable coupler M2 (10 uds)
1 x Black large kwik link (10 pcs)
1 x Spare Part Frame Set for EACHINE RACER 250
1 x Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm
1 x Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x APM2.6 Power module with 5.3V DC BEC
1 x Angled clevis with threaded rod M3
1 x Ball link Aluminio M3 (2 pcs)
1 x Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x 8Wx2 Navigation & Strobe, 11mm Green/White
1 x 4Wx2 Power Navigation Light, 13mm, T-Fuse White
1 x 8Wx2 Navigation & Strobe, 11mm Red/White
1 x NF-3X-350 set
1 x Jet Afterburner Simulator NF-Jet3 RYS
1 x L-Connector 1.5 mm x 1000 mm
2 x Carbon fiber rod 0.8 mmx1000 mm
2 x Squared carbon wing joinner 5x5x220 mm
2 x Carbon fiber rod 5.0 mmx1000 mm
2 x Combo lighting module with covering drop shape
1 x NF-1 RC set
2 x Jet Afterburner Simulator NF-Jet2YY Set
1 x Jet Afterburner Simulator NF-Jet3 RY
1 x LED blink wire flashing (white - 2pcs)
1 x LightBox SR
3 x ABS Strip 1.5x8.0x1000 mm
1 x Junta selladora, Tacky Tape Gris 2.75mmx12mmx15m
2 x Strip ABS 2.0x5.0x1000 mm
1 x Foam plastic plates (310x210x2 mm)
1 x Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m
1 x Foam plastic plates (310x210x8 mm)
2 x Strip ABS 2.0x3.0x1000 mm
1 x Fiberglass plate 350x150x1.0 mm
1 x Fiberglass plate 350x150x1.5 mm
2 x Thermoforming sheet 0.5mm (0.02in) DIN A4
1 x Thermoforming sheet 0.1mm (0.004in) DIN A5 (5 pcs)
1 x Aluminium sheet 500x250x0,5mm
1 x Breatex™ Non-woven absorber 150 g/m² Roll 100m
1 x Round Rod 1,25x1000 mm
1 x Fiberglass plate 350x150x0.3 mm
1 x Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x Teflon rollers 40 mm x 15 mm Diam.
1 x Fiberglass plate 350x150x2.5 mm
2 x PVC plate 320 x 194 x 0.23 mm (brown)
1 x Release film 100 cm x 50 m
1 x Sandwich Carbon fibre Rohacell (800 x 280 x 3 mm)
1 x ABS 500 x 400 x 1,5 mm (white)
1 x Strip 2,5x1,25x330 mm
1 x Servo KST X06H - 1.8Kg.cm 7mm 6g
1 x Servo KST X10 V2.0 ala 10mm 28g 10.8Kg
1 x Servo KST X08 Plus 9g HV servo
1 x Blue Aluminium double servo arm V3-Hitec 3-3,5inch
1 x Propeller 12x6 Falcon electric
1 x Servo BLS-M55B 61.2kg
1 x HPP-21 PLUS PC Programmer for Hitec Digital Servos
1 x Servo HITEC HS-5245 MG Digi
1 x 40 mm gas motor standoff
2 x Sandwich carbon + poplar 2mm + carbon 290x160 mm
1 x Aluminium cap bolt washer M3 black (8 pcs)
1 x Brazo servo aluminio HITEC HS-125MG/5125MG
1 x Servo HITEC HS-53
1 x 19.5x13 Falcon electric 3-Blade carbon prop (54 g)
1 x Servo HITEC HS-125 MG
1 x L-shaped servo mount
1 x 20,5x14,5 Falcon electric V2 (40 g)
1 x Servo HITEC HS-56 BB
1 x Servo HITEC D941 TW
1 x Servo HS-5565MH High Voltage
1 x Servo arm with 6 mm hole to FEMA 9800A
1 x Servo HITEC HS-5585MH
1 x Servo MKS 6100 DS
1 x Servo HBS 690BB HV Digital
1 x Servo MKS HV6130
1 x Servoholder Dymond DS 1800 MG Digital (2 pcs)
1 x Servo RHINO pro SHV digi 4
1 x Servo MKS HV747
1 x EXTRA NG 85" 2159mm red/white
1 x Micro clevis (10 uds)
2 x Metal clevis M3 (10 uds)
1 x Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
1 x Carbon fiber rod 20 mmx1000 mm
1 x Carbon fiber rod 14 mmx1000 mm
1 x Brass hexagonal rod Ø 3 mm x 1000 mm
1 x LED blink wire flashing (orange - 2pcs)
1 x Teflon rollers 80 mm x 15 mm Diam.
1 x Chopped glass fibre strands 0.2 mm
1 x Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
1 x Transmitter GRAUPNER MZ-24 Pro
1 x Glass fabric 160 g/m² (Twill weave) 100 cm x 5m
1 x 30 mm gas motor standoff
1 x 15 mm gas motor standoff
1 x 15 mm floating pad (30 pcs)
1 x 10 mm Quick clamp_L (6 pcs)
1 x Aluminium cap bolt washer M4 red (8 pcs)
1 x Bateria DJI Mini 2 2250 mAh
1 x EDGE 540-A 74" (1880 mm)
1 x M4xM2,5xL30 nylon clevis and arm (10 uds)
1 x Ø 2 mm pin for Kwik link MPJ2162/2163 (6 pcs)
1 x Servo case HS-225MG/225BB/5245MG
2 x Propeller Pleg CAM-Prop 10x6 + Spinner
1 x Anodized aluminium servo M4x5/8 screw (4 blue pcs)
1 x Carbon fiber rod 10 mm x 1000 mm
1 x Carbon fiber rod 3.0 mm x 1000 mm
1 x Carbon fiber rod 0.5 mmx1000 mm
1 x Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x Carbon fiber rod 1.5 mm x 2000 mm
1 x Carbon fiber flat 1000x3.0x0.13 mm
1 x Carbon fiber flat 1000x3.0x1.0 mm
1 x Carbon fiber rod 16 mm x 1000 mm
1 x Carbon fiber rod 2.0 mmx1000 mm
1 x Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg
1 x Reflector 18 mm (2 pcs)
1 x LED blink wire flashing (red - 2pcs)
1 x LED blink wire flashing (green - 2pcs)
1 x 40,0 mm hydro-propeller (left hydropropeller)
1 x Conector JAPAN G2 Set 5 pares
1 x Fiberglass plate 350x150x4.0 mm
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x Receiver Crystal 35 Mc/s Ch 62
1 x Sandwich carbon + poplar 4mm + carbon 290x160 mm
1 x ABS Strip 1.5x6.0x1000 mm
1 x ABS Strip 1.0x4.0x1000 mm
8,643.01EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies