1,800.00EUR

Motor SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Comentarios
Aceptamos
Búsqueda Rápida
 
Use palabras clave para encontrar el producto que busca.
Búsqueda Avanzada
1 x Acorazado Tirpiz 1:200
1 x Accesorios SCHARNHORST
1 x Banda lijado g. 180 para BSL 220/E (5 pcs)
1 x Adaptador de hélice 6 mm M8
1 x Adaptador de hélice 4 mm CN-Spinner
1 x Varilla carbono 1.0 mm x 1000 mm
1 x Adaptador USB para elementos Jeti DUPLEX
1 x Cinta fibra Carbono 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x Conector ala MPX 8 pines con conector M/H
1 x Bancada servo gancho
1 x Cable carga bateria transmisor Futaba 2x0,5 qmm (50 cm)
1 x Gafas Nimbus "Black"
1 x Soporte Angular conector XT-60 (2 pcs)
1 x Varilla carbono plana 1000x6.0x0.8 mm
1 x Cable pull pull SUS 3m + cierres
1 x Varilla carbono plana 1000x3.0x1.0 mm
1 x Extension silicona 30 cm hembra (Graupner)
1 x Oracover Amarillo CUB 10 m
1 x Varilla carbono plana 10.0 x 1.0 x 1000 mm
1 x Cartucho de humo Rojo 140 g
1 x Acople ALU M3 Ø 5 (2 uds)
1 x Paracaidista
1 x Casquillo para grimpar cable de 0,70 mm (10 pcs)
1 x Cierre cabina
1 x Hélice Falcon 20x13 eléctrica en carbono (64g)
1 x Varilla acero Ø 0,8 mm x 1000 mm
1 x Funda hélices 16-20" (2 pcs)
1 x Cable servos silicona 0,50 mm2 Futaba (100 m)
1 x Medidor ángulos
1 x Cable servos silicona 0,50 mm2 Graupner (5 m)
1 x Arrancador 12v (Max 90 and 15ccm)
1 x Copiador 2 unidades de 20 cm
1 x Ametralladora MG 1,8 cm (5 pcs)
1 x Adaptador prision. 8 mm/M12 "long"
1 x Bolsas inyectoras desechables (30x16cm) 100 pcs
1 x Destornillador allen 2,5x60 mm molibdeno
1 x Adaptador de hélice 3,2 mm M6
1 x Arrancador EM Gear Power 250
1 x Oracover Blanco 2 m
1 x Horn aluminio anodiazado 6 mm rojo con rótula
1 x Acople ALU M2,5 Ø 4 (2 uds)
1 x Conector AS150 7mm antichispazo (Set: 2 pares)
1 x Perfil de ABS cuadrado 4 x 1000 mm
1 x Cinta autoadhesiva 13 mm x 16.80m; Diente 1.0 mm
1 x Cartucho de humo Verde 100 g
1 x Conector banana oro 2 mm
1 x Brazo aluminio ALU-STAR
1 x Perfil de ABS cuadrado 1 x 1000 mm
1 x Cinta autoadhesiva 5 mm x 16.80m; Diente 0.5 mm
1 x Prolongador cable servo POWERBOX 50cm
1 x Cinta fibra vidrio 25 mm
1 x Liston ABS 1,5x3,0x1000 mm
1 x Prolongador servo 15cm MULTIPLEX
1 x Kit de montaje "S" para avión
1 x Gafas Zurich Sport Sunglasse Dark Sensity MAGENTA
1 x Perfil Acero Inox. 9.0x5.0x1000 mm
1 x CC 05
1 x Varilla carbono plana 1000x3.0x0.13 mm
1 x Arandela conica ancha alumino M3 azul (4 pcs)
1 x Arandela conica alumino M4 azul (8 pcs)
1 x Cable servos PVC 0,08 mm2 Graupner (5 m)
1 x Varilla latón hexagonal Ø 5 mm x 1000 mm
1 x Varilla acero roscada M3 -1m
1 x Soporte WingFix ULTRA BE
1 x Hélice 11x4,7 SlowFlyer
1 x Hélice MEJZLIK 22x10 Electric light (36 g)
1 x Cable servo 4 lineas PVC 0,25 mm2 JR/Graupner (5 m)
1 x Hélice 3x2
1 x Eje para motor Hacker A60 L V4
1 x Adaptador de hélice 3.2 mm M6
1 x Alicate para "Ball-Link"
1 x Aero-Master Alas (Aero-naut)
1 x Destornillador allen 3,0x60 mm molibdeno
1 x Arrancador EM Gear Power 80
1 x Adaptador de hélice 5 mm M8
1 x Alfileres de cobre 0,7 x 7 mm, aprox.50 g
1 x Adaptador de hélice 3.17 mm CN-Spinner
1 x Destornillador Torx® TX8
1 x Destornillador Torx® TX6
1 x Adaptador de hélice 3 mm M6
1 x Adaptador de hélice 2 mm M6
1 x Alicate para hacer "Z"
1 x Conector "T" 6-6-6 mm tubo bomba vacio
2,489.72EUR
Fabricantes
Información del Fabricante
Saito
Otros productos
Idiomas
Español English
Monedas