25.00EUR

Lipo KAVAN 2200 mAh 11.1v 30/60C
[KAV33.7126]


Lipo KAVAN 2200 mAh 11.1v 30/60C
KAVAN 30/60C lithium polymer packs are great for Sunday flyers, all-around and sport models; they feature 30C max. discharge rate, charge rate 1-2C, wide capacity range (350-3250 mAh) and long lifespan at truly affordable price.
KAVAN 30/60C packs present a perfect power supply for all-around sport, semi-scale and aerobatic models (both pattern and 3D), scale boats etc. that will make happy Sunday flyers or skippers. The comparatively high discharge rate allows unleashing the full power of your power unit, quite aggressive flight style and all sorts of fun.
Do not use a charge rate higher than 2 C, the recommended charge rate is 1-2 C. We recommend using a balancer during every charge. KAVAN 30/60C LiPo batteries do not require any initial forming; however, if you intend to use 2C charge rate, the initial three charging cycles should be performed at a rate not higher than 1C. There is no need to discharge the LiPo batteries before the charging - you can charge partly discharged packs.
The batteries are supplied as "Air Packs“ optimized for model planes and helicopters. The packs feature heavy duty silicone power (charging) cables without connectors and balance cables with JST-XH connectors that could be connected directly to the balance sockets of the most of KAVAN, Raytronic, SkyRC, GT Power etc. chargers. The package contents: KAVAN 30/60C battery pack, instruction manual.
Capacity [mAh]: 2200 ; Voltage [V]: 11.1 ; Charging current [A]: 2.2 - 4.4 ; Max. Charging current [A]: 4.4 ; discharging current [A]: 66 ; Max. discharging current [A]: 132 ; Energie [Wh]: 24.4 ; Lenght [mm]: 107 ; Width [mm]: 35 ; Height [mm]: 22 ; Weight [g]: 164


temporarily out of stock
temporarily out of stock

Reviews
Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
  
  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
    A123 LiFe Batteries
    Accesories
    AIRSOFT Battery
    Lead batteries
    LiIo Batteries
    LiPo Batteries->
      E-Flite
      Gens Ace
      KAVAN
      RAY/FOXY
      ROBBE
      ROI IMPORT
      SPEKTRUM
      TopFuel
    NiMH/NiCd Batteries
    Battery Testers
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
3 x Extension 100 cm (Futaba)
2 x Premium servo extension 50cm
1 x Straightened threaded rod M3 - 1m
3 x Extension S-Bus 1-2 silicon 120 cm FUTABA
1 x Straightened rod Ø 6.0 mm x 1000 mm
3 x Cable silicona macho batt. receptor 30 cm (Graupner)
3 x Extension lead 15 cm Multiplex
1 x Brass rod Ø 1.0 mm x 1000 mm
3 x Extension silicon 100 cm (Graupner)
1 x Premium servo extension 100cm
2 x Extension S-Bus 1-2 silicon 30 cm FUTABA
3 x Prolongador S-Bus JR/JR 20cm
3 x Prolongador S-Bus JR/JR 10cm
3 x Circlick securite
2 x Brass hexagonal rod Ø 3.5 mm x 1000 mm
2 x Brass rod Ø 0.5 mm x 1000 mm
2 x Cable silicona female batt. receptor 30 cm (Futaba)
2 x 0,14 mm PVC servo wire extension, ZH micro conector.
2 x Extension 7.5 cm
1 x Straightened rod Ø 5.0 mm x 1000 mm
2 x Brass rod Ø 0.8 mm x 1000 mm
1 x Aluminium rod Ø 4.0 mm x 3000 mm
1 x Brass hexagonal rod Ø 4 mm x 1000 mm
1 x Straightened rod Ø 4.5 mm x 1000 mm
1 x Straightened rod Ø 0.5 mm x 1000 mm
1 x Straightened rod Ø 1.0 mm x 1000 mm
2 x Straightened rod Ø 0.8 mm x 1000 mm
1 x Straightened rod Ø 2.0 mm x 1000 mm
2 x Extension 90 cm (Futaba)
1 x Extension silicon 30 cm male (Futaba)
3 x 200 mm extensión servo HITEC/JR
1 x Straightened rod Ø 7.0 mm x 1000 mm
2 x Extension silicon 10 cm (Graupner)
3 x servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT
1 x Brass rod Ø 1.5 mm x 1000 mm
1 x Cabel "Y" 30 cm (Futaba)
3 x Futaba Female 40 cm extension
3 x Premium servo extension 25cm
4 x Extension silicon 30 cm female (Futaba)
1 x Straightened threaded rod M2-1m
3 x silicon 100 cm Futaba Extension Ø 0,35 mm
1 x Cable S.BUS 3 salidas 100 mm
1 x Aluminum Bayonet / strongal D25 mm / 1 m
1 x Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
1 x Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
1 x Sandwich carbon + poplar 3mm + carbon 480x290 mm
1 x Pine wood slat 3.0x10.0x1000 mm
1 x Beech dowels 10 mm x 1000 mm
1 x OBECHI sheet 2.0x3.0x1000 mm
1 x Mahogany wood slat 2.0x2.0x1000 mm
1 x Pine wood slat 2.0x10.0x1000 mm
1 x BALSA triangular 8x8x1000 mm
1 x Mahogany wood slat 3.0x3.0x1000 mm
1 x Liston HAYA 10 x 10 x 1000 mm
1 x Walnut wood slat 1.5x1.5x1000 mm
1 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x MPX-Dean "T" Adapter
1 x TP/TopFuel - JST-EH 4/5S Adapter
1 x Red copper lacquer wire Ø0,2 mm (5 m)
1 x Bec MR UBEC 5A (5v/6v/7v)
1 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
2 x Dean "T" - Futaba Adapter
3 x 30 cm BEC cable (male)
2 x CC 02
1 x CC 01
1 x Copper lacquer wire Ø0,2 mm (5 m)
1 x Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x APM2.6 Power module with 5.3V DC BEC
2 x JETImodel SINGLE BEC
2 x Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x CM-3
1 x CellPRO 4S Adaptader (GP/KO up to 4S)
1 x Propeller APC 12x6 Electric Pusher
2 x Propeller APC 12x3.8 SF
1 x Propeller APC 13x4 Electric
1 x Propeller APC 11x7 Electric
2 x Propeller APC 10x3,8 SF
2 x Propeller APC 12x10 Electric
1 x Propeller APC 10x5.5 MR Electric multirrotor PUSHER
1 x Propeller APC 10x6 Electric Pusher
1 x Propeller APC 10x4.7 SF
1 x Propeller APC 12x6 Electric
1 x Propeller APC 11x10 Electric
1 x Propeller APC 13x6.5 Electric
1 x Propeller APC 10x5.5 MR Electric multirrotor
1 x Propeller APC 11x5.5 Electric Pusher
2 x Propeller APC 11x3.8 SF
1 x Propeller APC 10x7 Electric
1 x Propeller APC 14x12 Electric
1 x Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x SE Ring 480 mm (2 pcs)
1 x Pin type hinge Al 4,5x70 mm demount (2 pcs)
1 x Straightened rod Ø 2.5 mm x 1000 mm
4 x Extension silicon 25 cm (Futaba)
3 x Extension silicon 35 cm male (Futaba)
1 x Extension silicon 30 cm female (Graupner)
1 x Cable S.BUS 3 salidas 300 mm
1 x Propeller APC 10x4.7
1 x Servo case HS-225MG/225BB/5245MG
3 x Brazo servo MKS X8 Metal L:1.25/1.5 inc
1 x 29x12 prop Super Silence
1 x Propeller POWER-PROP 14x9 Izda
1 x Lite Plywood panel 600x300x2.0 mm
3 x Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø21 mm)
1 x 
1 x Birch plywood plate 600x300x2.0 mm
1 x 3-blades 16x10 carbon prop Super Silence
1 x Brass hexagonal rod Ø 5 mm x 1000 mm
1 x 3-blades 20x12 carbon prop Super Silence
1 x Receptor CORE PBR-26XS 26ch
1 x Birch plywood plate 600x300x1.5 mm
1 x A/C quality beech plywood 600x300x6.0 mm
1 x Plywood sheet BEECH 600 x 300 x 2,0 mm
1 x Wing Joiner ULTIMATUM 2.0 m
1 x Straightened rod Ø 4.0 mm x 1000 mm
1 x Balsa panel 4.0x100x1000 mm
3 x Futaba male 40 cm extension
2 x Extension 15 cm (Futaba)
2 x Cabel "Y" 15 cm
1 x Adaptadores carga 6s JST-XH
1 x FX three-position switched channel, long
2 x LiPo Storage Box Type "P"
1 x SPS 70V 140/280 A
1 x Cabel charger transmitter GRAUPNER
1 x PWC4 wing/fuselage connector for 4 servos
2 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
2 x Electronic switch JETI SP6 0-15v/6A
1 x Female connector for 6 pines AWG
1 x Extension 5 lipos JST/C - JST
2 x Connector CAN 15
1 x Adapter lead MPX/EC3
2 x SBEC 40
1 x Male connector for 16 pines AWG
1 x Extension 2/3 lipos JST - JST/C
2 x CC 03
1 x Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
2 x MAX BEC 2
1 x 30 cm BEC cable (female)
2 x 3 LiPo XH>EH adapter
1 x Slave-cable USB Easy Sim
1 x EasyFLY Addon
2 x Extension silicon 100 cm (Futaba)
3 x Extension silicon 25 cm (Graupner)
1 x ABS tube 7.0x5.0x1000 mm
1 x ABS tube 5.0x4.0x156 mm
1 x Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm)
1 x Male connector for 10 pines AWG
1 x Hacker X-Pro USB interface V2
1 x Female connector for 12 pines AWG
1 x Extension 2/3 lipos JST/C
1 x Connector Sub-D 2+5 Female
1 x Pins M connect Multipin connectors AWG 20-24
1 x PSC 5
1 x Extension 6 lipos XH > EH
1 x 4 LiPo XH>EH adapter
1 x Selfstart electronic switch
2 x Motor KAVAN PRO 2225-1600
1 x Prolonguer for Balancer Thunder Power 6S
2 x CC 05
1 x Female connector JST SH 1.0mm with 10 cm wire
1 x Refueling Cap V3 Black
1 x SPARK Switch 12v
1 x TP/TopFuel - XH 2/3S Adapter
1 x Switc electronic 30 Amp
1 x SBEC Jeti
1 x Servo SAVOX SV-0236 MG HV
1 x Soporte servo KST X10 mini / DS135MG
1 x Servo mounting frame SV-1260MG
1 x SERVO DES 588 BB MG
1 x Servo RHINO pro SHV digi 4
1 x Servo SAVOX SV-1261 MG
1 x Servo KST X08H V5.0 HV DIGITAL Wing servo 8mm
1 x Servo HITEC HS-5585MH
1 x Brazo servo aluminio HITEC HS-125MG/5125MG
1 x FIALA Propeller 19x12 Electric
1 x Servo DITEX TD2612S
1 x Servo HITEC HS-125 MG
1 x Servo HITEC HS-225 MG
1 x Propeller APC 10x3,8 SF Electric Pusher
1 x Servo FUTABA BLS172 SV
1 x Servo HITEC D951 TW
1 x Propeller APC 10x5 Electric Pusher
1 x Servo FUTABA BLS 272SV
1 x Cap Hispano Aviación
1 x Horn 5/20 with M2 Bearing
1 x Fiberglass motor-holder for electric motors
1 x 6 mm aluminium horn with patella
1 x Cooler motor type 150
1 x Horn 6/35 with M3 Bearing
1 x Jeti Black cap
1 x Extension 30 cm (Futaba)
3 x Extension silicon 75 cm (Futaba)
2 x Extension silicon 35 cm (Futaba)
1 x Extension silicon 10 cm (Futaba)
1 x Motor Scorpion HKIII 4035-560 Kv
2 x Vest clothes Hispano Aviación
1 x Radial heatsink for MPJ AC25/35-xx motor
1 x LH long aluminium horn L31xH30 (2pcs)
1 x Threaded coupler ALU M2 Ø 4 (2 uds)
1 x Threaded coupler ALU M3 Ø 6 (2 uds)
1 x Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x Hacker A30-S Radial Set
1 x Horn 5/15 with M2 Bearing
1 x Bearings for motor HACKER C50
1 x Shirt Hispano Aviación
1 x Central support Speed 600
1 x LH long black aluminium horn L31xH30 (2pcs)
2 x Extension silicon 50 cm (Graupner)
1 x Extension silicon 75 cm (Graupner)
1 x Cable silicona macho batt. receptor 30 cm (Futaba)
2 x Cabel "Y" 30 cm (graupner)
3 x Extension silicon 50 cm (Futaba)
2 x Extension silicon 30 cm male (Graupner)
2 x Extension PVC 150 cm (Graupner)
2 x Futaba Female 40 cm extension
1 x Premium servo extension 75cm
1 x ABS tube 6.0x5.0x1000 mm
1 x ABS tube 20.0x18.0x1000 mm
1 x BALSA triangular 15x15x1000 mm
1 x BALSA trip 3.0x5.0x1000 mm
1 x Male connector for 6 pines AWG
1 x USBCOM 5i
1 x EVP Unit for AXI2208/xx and 2212/xx
1 x Carbon tube 3K-PW (L 2000 mm, Ø12 mm, Ø10 mm)
1 x Carbon tube 3K-PW (L 2000 mm, Ø25 mm, Ø22.5 mm)
1 x Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø26 mm)
1 x DUPLEX 2.4EX Central Box 210
1 x Fibra de vidrio 80 g/m² (2 m x 100 cm)
1 x Backmountset complete A40
1 x A60-6XS V4 28-Pole
1 x Servo MKS 6100 DS
1 x 3,9 mm ZG20-ZG38 servo arm
1 x Servo FUTABA BLS175 SV
1 x Aluminium tube with fibreglass case ø35x1.5mm, 1m
1 x Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø10 mm)
1 x BALSA trip 10x10x1000 mm
1 x A/C quality beech plywood 600x300x8.0 mm
1 x PowerBox MicroSwitch
1 x ZEUS F3A 2m
1 x Pilatus PC-21 50E BLUE/WHITE (SebArt)
1 x MAX BEC
1 x Cabling for Fox MDM1 wings
1 x Electronic switch JETI SP06 Opto
1 x Servo slow down unit (0,7-14,7 sec )
1 x SPS Remote switch actuator
2 x "Y" charging 4mm wire (2 IN-1 OUT).
1 x 3 copper lacquer wire Ø0,2 mm (1 m)
1 x Epoxy L 40 min. (1 Kg) 715g Resina / 285g Hardener S (15 min)
1 x 2 LiPo XH>EH adapter
1 x HBC 10035-3 32-Bit
1 x TMM 2512-3S heli
1 x Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm)
1 x Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm)
1 x Carbon tube 3K-PW (L 1000 mm, Ø22 mm, Ø20 mm)
1 x Carbon tube 3K-PW (L 2000 mm, Ø20 mm, Ø18 mm)
1 x Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø26 mm)
1 x Gates hinge black 30x16 mm (2 pcs)
1 x Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm)
1 x Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø36 mm)
1 x Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm)
1 x Carbon tube (L 2000 mm, Ø16 mm, Ø14 mm)
1 x Carbon tube 3K-Matt (L 1000 mm, Ø25 mm, Ø23 mm)
1 x Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø22.5 mm)
1 x Carbon/kevlar tube 3K-PW (L 1500 mm, Ø25 mm, Ø22.5 mm)
1 x A/C quality beech plywood BIRCH 600x300x1.0 mm
1 x Opto Gas Engine Kill Switch
1 x Aluminium Hub "Z" for folding Props 30 mm M8 Shaft 5 mm
1 x Connectors banna oro 8,0 mm 5 pcs(Female)
1 x Aluminium Hub for folding Props 43 mm M8 Shaft 5 mm
1 x Opto Gas Engine Kill Switch
1 x Multi-adapter balancer JST/C - TP
1 x PowerBox SparkSwitch RS
1 x Connectors banna oro 8,0 mm (Male) 5 pcs.
10,904.05EUR
Manufacturers
Manufacturer Info
Kavan
Other products
Languages
Español English
Currencies