119.90EUR

DPSI Ampere battery backer
[EMCA15020]



Contenido del kit
Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)


temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x Rotor blade 3Bl Scale 1050R
1 x Bungee HLG Premium
1 x Linden wood slat 3.0x3.0x1000 mm
1 x SE Ring 480 mm (2 pcs)
2 x Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x ABS "T" angle 8.0x8.0x1000 mm
1 x 1/6 Pilot "Tony"
1 x 15 mm reinforced hinge
1 x ABS "T" angle 2.0x2.0x1000 mm
1 x Streamline Stainless Steel Tubing 9.0x5.0x1000 mm
1 x Medidor ángulos y/o incidencias
1 x 30 cm DEANS female connector
1 x EC5-Set female, simple quality, 2 x female pin, 1 x blue housing
1 x 1/12 Pilot "Langley"
1 x 1/4 Pilot "Mike"
1 x Mahogany wood slat 2.0x2.0x1000 mm
1 x Profile ABS half cane 3x1000 mm
1 x MPX Sub-D Adaptor
1 x BALSA trip 2.0x2.0x1000 mm
2 x 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x Gates hinge
1 x Pilot "Duke" Legends Series (Slimline)
1 x Conector BEC male (10 pcs)
1 x XH male balance (5S) connector (2 pcs)
1 x Streamline Stainless Steel Tubing 15.5x8.5x1000 mm
1 x Civilian pilot "Pamela" size 9cm (Slimline)
1 x L-Connector 4.0 mm x 1000 mm
1 x 20x200 mm battery rings
2 x Small pinned hinge (12 uds)
1 x U Profile ABS 8,0x4,0x1000 mm
1 x BALSA trip 8.0x8.0x1000 mm
1 x Pilot "Dick" Legends Series (Slimline)
2 x SE Ring 200 mm (2 pcs)
1 x Connectors banna oro 0,8 mm (M/F)
1 x Connectors banna gold 5,5 mm (M/F)
1 x 1/6 Pilot "Garry"
1 x XH female balance (3S) connector (2 pcs)
1 x 1/4 Pilot "Heidi"
1 x Connectors banna oro 6,0 mm (M/F)
1 x ABS angle 5,0x5,0x1000 mm
1 x OBECHI sheet 2.0x3.0x1000 mm
1 x 1/10 Pilot "Jimmy"
1 x Civilian pilot "Joe" size 9cm (Slimline)
1 x Piloto Jet "Red" 1/6 Scale
1 x Flat Connector 4.0 mm x 1000 mm
1 x 25 mm reinforced hinge
1 x 1/6 Pilot "John"
1 x XH female balance (2S) connector (2 pcs)
1 x Streamline Stainless Steel Tubing 19.5x9.8x1000 mm
1 x 1/6 Pilot "Cindy"
1 x Civilian pilot "Curt" size 9cm (Slimline)
1 x ABS angle 1.5x1.5x1000 mm
1 x XH male balance (3S) connector (2 pcs)
2 x 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x BALSA triangular 10x10x1000 mm
1 x Streamline Stainless Steel Tubing 10.5x5.7x1000 m
1 x Connector CAN 15
1 x Mahogany wood slat 1.5x1.5x1000 mm
1 x Profile ABS Square 4 x 1000 mm
1 x Fast'n EZ-CA-Hinge, lite (12 uds)
1 x SE Ring 450 mm (2 pcs)
1 x Optotronix Aurora Plug
1 x Connectors banna oro 8,0 mm (Male) 5 pcs.
1 x Aramid fibre shears Proton®, 21 cm / 8" length
1 x 55% silver electrodes (2 pcs)
1 x Dremel PERMAGRIT 18 mm round lime
1 x Fresa corte diamante Ø 2.35mm (flame)
1 x 1,5x50 mm allen screwdriver
1 x 4 LiPo XH>EH adapter
1 x Bec MR UBEC 5A (5v/6v/7v)
1 x Cabling for Fox MDM1 wings
1 x Fresa corte diamante Ø 1.0mm (bola)
1 x CC 02
1 x Dean-T Plug Mold
1 x CC 05
1 x EC-Cutter
1 x Dremel PERMAGRIT thin lime
1 x Disposable Injector Bags (30x16cm) 100 pcs
1 x BEC 3A FOXY
1 x Crimping tool
1 x Extra Hard Titanium Herxagon Screwdrivers
1 x 
1 x CC 01
1 x Digital scale up to 40 kg
1 x Copper lacquer wire Ø0,2 mm (5 m)
1 x Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x Double conector with JR adapter and 200 mm extension
1 x Ball Link Plier
1 x Ventus 1:4 set of instruments
1 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x DPSI Ampere battery backer
1 x 3 LiPo XH>EH adapter
1 x DUBRO - KWIK TWIST TOOL - TO TWIST STEEL WIRE (1 PC) (301)
1 x Small flex hinge (12 uds)
1 x SERVO DES 806 Pignons
1 x Streamline Stainless Steel Tubing 12.3x7.7x1000 mm
1 x Profile ABS half cane 4x2.5x1000 mm
1 x Servo MKS HV747
1 x PT 21x13 EL Propeller 3 Blade
1 x Servo MKS HV 777A+
1 x Flap hinge 33x9 mm (6 pcs)
1 x Angle measurer
1 x Servo GO-02 Digital 1.8g
1 x 1/12 Pilot "Cougar"
1 x Horizontal servo holder
1 x Pilot "Anthony" (Slimline)
1 x Futaba 38 mm servo arm with ball link
1 x 17 mm servo arm with ball link DES Graupner
1 x 63 mm INO spinner (carbon imitation)
1 x MPX plug mold V1
1 x MPX 8 pins plug mold
1 x Llave dinamomterica 74 Z 0 0 21
1 x PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs)
1 x Propeller diller 5/6,3/8/9
1 x Spinner NUT 1/4x28
1 x 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x Antenna holder bracket double
1 x Jet Afterburner Simulator NF-Jet3 RY
1 x NF-3X-80 liner Kit
1 x Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x HPP-21 PLUS PC Programmer for Hitec Digital Servos
1 x Micro flex hinge (12 uds)
1 x Large flex hinge (12 uds)
1 x Gates hinge aluminium (1 pcs)
1 x Round flex hinge (12 uds)
1 x ROBART POINT HINGE 4,7mm (5 pcs)
1 x LED lighting system High Power
1 x Jet Afterburner Simulator NF-Jet3 YSW
1 x Miniature brass strap hinge, 1 m
1 x Jet Afterburner Simulator NF-Jet3 RYS
1 x Tail gear set (60-120 class)
1 x Tailwheel for 40/90 size
2 x Fast'n EZ-CA-Hinge (12 uds)
1 x Propeller FIALA 15x8 3-Blade
1 x Flap hinge (6 pcs)
2 x Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x 48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x SERVO DES 707 BB MG, Pignons
1 x Nylon hinge 20x15x0,3 (10 pcs)
1 x Servo MKS 6100 DS
1 x Hitec 25 mm servo arm with M3 ball link
1 x Tape GFK 38 mm
1 x Futaba 76/92 mm servo pull-pull double arm with ball link HUB Al
1 x Horizontal mounting servo holder
1 x Servo GO-1070MG 40 kg.cm 0.10s/60º
1 x Servo GO-1280 MG 40 kg.cm 0.085s/60º
1 x Spinner INO 70 mm Chrome (Imitacion metal)
1 x 45 mm white plastic spinner for fixed propeller / 4,0 mm axi
1 x 89 mm INO spinner (carbon imitation)
1 x 75 mm INO spinner (carbon imitation)
1 x Spinner INO 51 mm Chrome (Imitacion metal)
1 x 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x Extractor piñones 2.3/3.2 mm
1 x Connectors banna oro 4 mm (M/F)
1 x Mini Lock Grips 2PCS
1 x Laminating brush 10 mm, pack/ 50 pcs
1 x 45 mm white plastic spinner for fixed propeller
4,728.71EUR
Manufacturers
Manufacturer Info
Emcotec
Emcotec Homepage
Other products
Languages
Español English
Currencies